** UPDATED **
PLAzmA's Sliding Sound Pack for TYTN II (Kaiser) and windows mobile phones with slide out keyboards
*Note: only use the NUMBERED CAB files to install if you are using a TYTN II Phone or if you have the standard HTC Sliding sound system built into your rom. If however on phones like the HTC Wizard where no sliding sound is currently present, install the SlidingSound.cab file, and then launch the program and assign the files manually. The Numbered CAB files will not work for the older phone method.
List Of WAV FILES USED:
0 : Wind Chimes
1 : Piano
2 : Xylophone
3 : Futurama Bender
4 : Might Boosh
5 : Startrek TOS
6 : Dalek
7 : Cash Register
8 : Electricity
9 : Electric Motor
10: Hal 2001
11: POP
METHOD 1: TO INSTALL NEW HTC PHONES LIKE KAISER BY CAB FILES:
This is really easy pick one of the numbered install files from "Kaiser - Modern Phones CAB Install Files.rar", you can either install the complete pack or just one of the sounds, however as it must have a constant number sequence in the registry, its programmed to replace the 3 base sounds in every pack. This is to ensure that the pack works correctly despite possible older mods. This means if you remove a pack it will also take the 3 base sounds with it, however at any time you want to go back run the htc base sounds pack, make sure you first uninstall the previous pack completely and the run the base pack install cab.
*Note: above numbered cab method only for newer phones with htc slide service like the kaiser, DONOT install onto older phones like wizard as this will not work see the next method.
METHOD 2: TO INSTALL BY ADD ON SLIDINGSOUND.CAB METHOD TO OLDER PHONES:
Install cab file and run sliding sound program, turn on slide detect service and assign wav files manually, refer to the list above for the appropriate numbers, there are two files to select from a simple "SlideSound.cab" file which just has a basic pop noise, additional sounds will need to be install manually, or to install the program and sounds all in one go, install the "SlideSound - All Sounds.cab"
*Note: above cab method is only for phones without the htc sliding sounds program built into your rom and only required on older phones like the herms, wizard etc..
R°CK ON PLAzmA 2008
Download is at :
http://rapidshare.com/files/93019505/PLAzmAs_Sliding_Sound_pack_for_Windows_Mobile_V2.rar.html
http://www.megaupload.com/?d=KXSPHM0Q
Funny. I installed the Startrek Communicator sound alone. Real nice.
Rapidshare link down???
Hi:
Thanks for posting this!
Sorry for the dumb question. Do I copy just the wav files to Windows, or the reg files also? If not, where do I need to place the reg files (I want to install all sounds)? I placed the All Sounds file in My Documents, and clicked on it, it opened reg editor, but did not seem to apply changes, as they are still not visible under sliding sounds.
Thanks so much for the help.
when i try to open the all sliding sounds.reg i get the message "The specified file is not a registry script" please advise
To import registry file you need phm reg edit.
PHM Registry Editor
http://www.phm.lu/products/PocketPC/RegEdit/
Try installing this and then open the file again
plazma247 said:
PHM Registry Editor
http://www.phm.lu/products/PocketPC/RegEdit/
Try installing this and then open the file again
Click to expand...
Click to collapse
Hi Plazma:
I do have PHM Reg Editor.
I copied the all sounds file to my documents, and clicked on it, which did open PHM reg editor, but it didn't seem to make any changes. The sliding sounds are still not visible in settings etc. I have soft reset etc. and I still do not see the new sounds. Should they be visible in the standard sliding sound settings?
Any idea what I could be doing wrong? Do I maybe need to have all the reg files on phone, or is it enough to use all sounds only?
Thanks again!
Check new install
cincy1020 said:
Hi Plazma:
I do have PHM Reg Editor.
I copied the all sounds file to my documents, and clicked on it, which did open PHM reg editor, but it didn't seem to make any changes. The sliding sounds are still not visible in settings etc. I have soft reset etc. and I still do not see the new sounds. Should they be visible in the standard sliding sound settings?
Any idea what I could be doing wrong? Do I maybe need to have all the reg files on phone, or is it enough to use all sounds only?
Thanks again!
Click to expand...
Click to collapse
Ok to make it even easier ive stuffed it all into cab format installer for you see first post.
plazma247 said:
Ok to make it even easier ive stuffed it all into cab format installer for you see first post.
Click to expand...
Click to collapse
Worked Perfectly!
Thanks so much, I was VERY sick of the piano sound
hi all,
Any chance of uploading it elsewhere other than rapishare or megaupload? Preferably mediafire or yourfilehost? Thanks ya!
Uninstall?
I have uninstalled this after I tried to make it work on my X1 (but failed) using the second option, and I am presented with an error at startup that it could not find slidesound.exe. I have checked the registry and cannot find anything in there. Any ideas??
Thanks
Worked fantastically on my Tilt 2. I love the Dalek one
MD2c has a tickbox for it but if I turn it on Manila refuses to start.
I have the MyFaves cab on the device and it works. I assume the problem is that there's a missing DLL or other file needed for Manila to talk to it.
Any ideas?
Genesis3 said:
MD2c has a tickbox for it but if I turn it on Manila refuses to start.
I have the MyFaves cab on the device and it works. I assume the problem is that there's a missing DLL or other file needed for Manila to talk to it.
Any ideas?
Click to expand...
Click to collapse
Same here. I've tried a workaround to get MyFaves going, but no luck so far. What does the CAB actually do and could you post it?
The CAB works - it allows me to see, dial and modify myFave entries.
Here it is..... note that if you load this on a phone WITHOUT Myfaves on your line it will after a while seem to "disappear" entirely.
I tried to upload and attach the zip but it wouldn't go - not sure why - I found it here on XDA tho - use SEARCH.
Where is the cab?
It won't upload, either as a CAB or ZIP - no idea why. Its within the size limits (well within).... if you IM me on Yahoo at k_denninger I can file-transfer it to you.
Here's the MyFaves app.
NOTE: I have edited this CAB to include more files missing from the original which made it NOT work on certain ROM's missing those files.
I have been trying to make my own theme for the past 48hrs with no success, and it's really frustrating me I started with manila editor which gave me an error everytime i tried to replace one of the manila files with multiple icons i downloaded. I then ran into another editor cfc which has allowed me to at least change the icons but i still really dont understand some of the icons that are included with manila (totally different story)...Back to my issues I would like to know if someone can guide me on making my theme into a .theme file extension because i like to use diamond config tool it just makes everything so much easier. Also i've seen where a cab file will not uninstall and i dont want to have to hard reset just to change my theme.
Also I would love to know how to create my own clock because i'm trying to cook this whole allen iverson theme and i think maybe a custom clock best suits the theme i'm going for so i would probably need to learn how to make the clocks also.
I know it sounds like alot but i really need to get this started so any and all help, tips, tricks would be greatly appreciated.
black3188 said:
Back to my issues I would like to know if someone can guide me on making my theme into a .theme file extension because i like to use diamond config tool it just makes everything so much easier. Also i've seen where a cab file will not uninstall and i dont want to have to hard reset just to change my theme.
Also I would love to know how to create my own clock because i'm trying to cook this whole allen iverson theme and i think maybe a custom clock best suits the theme i'm going for so i would probably need to learn how to make the clocks also.
Click to expand...
Click to collapse
I think to make a theme into .theme format, just zip all your files and then rename the extention from .zip to .theme. If you take all your manila files from standard tf3d from your phone and save to pc, then you will always have a backup to install instead of a hard reset when you have cab install troubles. That way you can overwrite any files cab installed. To create your own clock, when you look in editor you will see a tab stack and a tab single for clock backgrounds, alarm, and am/pm. Tab stack is the back background and tab single is the front background(clock background is two layers for flip effect). If you want to change digits, you will see the digits grouped , like 012, 345, 678, 9. Change images in your favorite image editor(like photoshop or gimp). For actually changing images/manila files, I use all three editors available depending on what I'm doing. There's Manila Editor, Chainfire's CFC GUI, and 6Fg8's M9Editor. Always keep a backup copy of any files you change, just in case
I built a custome theme for VZW TF3D1 user (tlr and stock tested) and I would like to build a cab file...any help on that?
aaronvlee said:
I built a custome theme for VZW TF3D1 user (tlr and stock tested) and I would like to build a cab file...any help on that?
Click to expand...
Click to collapse
look for a program called WinCE Cab Manager it will do the trick
I think wince cab manager costs like a hundred bucks; at least it did the last time I looked it up. Look up Quickcab 2.0; it's free and easy to use. Adding reg keys is a bit tough, though, especially if there is a bunch of hex code. You might look to sk tools to make the cab if you have a bunch of reg entries. What you do is create a cab file with Quickcab that inserts all the necessary files. Run it on your device, then open SK Tools and go to the 'Installed Programs' tool. Long press on your cab, and then select 'Make Cab.' When the cab page comes up, you can then add as many reg entries to the cab from your device as you want. It's really simple to do. Then select 'create cab' and you're done. You have to pay for sk tools if you don't already have it, obviously, but it's only 16 bucks and will be more useful to you in the long run I suspect than blowing 100 bucks on Wince Cab Manager.
I am using Visual Kitchen to build my ROMs. There are five types of files that are used to eventually create the registry: *.hv *.rgu *.reg *.provxml *.xml. I'm trying to find a program that takes all these files one by one and create ONE *.rgu file. When adding keys to the One.rgu the program should check whether the key exists with different value and ask the user whick value to keep. Is there a program like that? Could someone make one? I am not a programmer myself so i can't do it but i believe that this would be very useful for all cooks.