I flashed my firmware with one of the Cingular firmwares. (my mda was already unlocked) Now when I try to use one of the tmobile firmwares to flash back it gives me an error. This is what I have installed now.
Rom 1.8.10.12
Rom date 12/1/05
Radio version 02.13.11
Protocol 4.1.13.05
IPL 2.21
SPL 2.25
GSM 02.13.11
OS 1.8.10.2
Can anyone tell me what is going on here. The phone is working and the data services work. I need someone to post the link to the best firmware flash for my TMOBILE MDA (us version) I have service with Cingular. I need the ROM that has the best receiption and performance and the most features that will work on my MDA Please help.
if you want to go back to the T-Mobile original settings, you need to upgrade to the custom ROM and then downgrade back. If you just want to have the T-Mobile settings, stick with the 2.17 custom rom that Xelecin cooked. I've found that his 2.21 rom was a lttle buggy, but his 2.17 rom is spot on. It has the cid/sim unlockers built in.
good luck
ftp://ftp.xda-developers.com/Wizard/Roms/Tmobile/
user id: XDA
PW: xda
Another Question
I did that and gave the MDA to my wife. I am looking to get a new phone and lookng at the Cingular 8125. Will I be able to unlock this phone with any of the utilities on this site.
Related
I recently upgraded my US MDA to 2.21. I think I'm stuck there because I didn't unlock it beforhand. Can I still upgrade (or downgrade) to another version... official or not?
You'll always be able to upgrade using Official Roms also if you check this thread:
http://forum.xda-developers.com/viewtopic.php?t=56088
You'll see a way to upgrade Radio, OS & extended Rom without upgrading IPL/SPL (bootloader) which is where the CID resides.
BTW, where did you get T-Mobile UK 2.26 Rom?
I think I got confused.. It's actually 2.21.2.6.
Thanks for the link I'll give it a try!
I have been reading these forums for about a month now. I finally bought a unlocked MDA that I am currently using with cingular. I think my phone is CID locked don't really know. I want to upgrade the rom it still has 1.8.10.2 WWE Rom, It has 01.09.10 for the radio rom. I tried to update to the newest Qtek 9100 rom but it gave me a error on the updater. Can I update to the newest T-mobile rom and not have it locked back up? Please help I tell me what to do.
Thank,
Niko
hello there
Don't load the new tmobile version...download the 8125 ROM from here:
http://www.htcamerica.net/support/cingular_8125.html
It will work and make the phone a Cingular ROM phone. I did it today and it's awesome.
If you decide to upgrade the ROM to cingular, when you get to the end of the progress bar and it seems to stop for a long time...wait longer!!! It will work.
Good luck.
okay i've successfully unlocked my sim and cid on my cingular 8125. i wanted to do this because i wanted to use a qtek 9100 rom. however i don't know which 9100 rom to download. which one is the latest one? i'm so lost now. also now i don't have any signal on my phone. i think its because i have to download the radio rom.
another question i have is... should i download the cingular radio rom or the tmobile radio rom since i am using a tmobile sim???
I downloaded Viet4 and run upgrade, on welcome screen on PC during upgrade it does not correctly detect my Wizard and shows as ROM 1.0.0 and for new version it says only blanks.
After upgrade device just boots to previous version of the ROM (2.26). What am I doing wrong?
Let me be the first one to say it before someone else does... Read the Wiki
Joking aside, you need to give more info such as do you have a G3 or G4? Did you CID unlocked your device? The error you have given usually meant that your device is CID locked.
artisticcheese said:
I downloaded Viet4 and run upgrade, on welcome screen on PC during upgrade it does not correctly detect my Wizard and shows as ROM 1.0.0 and for new version it says only blanks.
After upgrade device just boots to previous version of the ROM (2.26). What am I doing wrong?
Click to expand...
Click to collapse
sounds like you didn't CID unlock before trying to flash a rom that didn't come from your carrier.
and the upgrade tool will not have the right info in those fields. If your phone is unlocked the upgrade will work properly. Make sure you use the correct procedure based on whether you have a G3 or G4 phone.
I have G3 device
I have Qtek 9100 which was never locked of course. Then I installed ROM and radio upgrade with versions below
ROM version: 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
Hardware:
CPU:OMAP850
Flash chip type:M-Systems
What do I do now?
artisticcheese said:
I have Qtek 9100 which was never locked of course. Then I installed ROM and radio upgrade with versions below
ROM version: 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
Hardware:
CPU:OMAP850
Flash chip type:M-Systems
What do I do now?
Click to expand...
Click to collapse
What is your IPL/SPL. And how do you know it was never locked? Have you personally unlocked it? Have you ever flashed any rom that was not from your carrier successfully?
If you have a G3 (ipl/spl 2.26/2.26) then I suggest following the full unlocking tutorial thread that is stickied. Trust me your phone is acting like a locked phone. If you haven't personally unlocked it then just humor us and do this. You will be amazed at the results.
If you have a G4 (ipl/spl 2.26.0001/2.26.0001) then you will have to use the pay website to unlock your phone. There is no other known way to unlock G4 devices at this time.
I assume since it was bought in Russia and branded as Qtek 9100 then it was not locked. Is it possible that ROM upgrade to Cingular ROM actually locked my phone?
SPL 2.26/2.26
I going through downgrade right now and then do CID unlock. Do I have to do SIM unlock as well? How do I know if device is unlocked?
artisticcheese said:
I assume since it was bought in Russia and branded as Qtek 9100 then it was not locked. Is it possible that ROM upgrade to Cingular ROM actually locked my phone?
SPL 2.26/2.26
I going through downgrade right now and then do CID unlock. Do I have to do SIM unlock as well? How do I know if device is unlocked?
Click to expand...
Click to collapse
SIM unlock will allow you to use any sim from any carrier without getting an invalid sim error. If you aren't getting this error already you should be ok not doing it but it doesn't hurt to do it since you are in there with Lokiwiz already.
The tutorial tells you to do the SIM unlock first then do the CID unlock.
once you are completely done don't forget to flash up to a 2.x rom (2.26 T-Mobile rom suggested) before flashing a custom rom.
At this point when you flash the custom rom your OS and possibly GSM will change (IPL/SPL may change if you use a rom that includes them)
You should be good to go once the CID unlock process is done completely.
I used Unlock and CID Unlock, both went fine. Now IPL 1.01 SPL 2.26 OS 1.5.4.2.
Do I need to upgrade to 2.X before upgrading to WM6 or I can run upgrade the way it is now? Do I need to upgrade IPL (whatever it is to 2.26 as it was before?)
THanks,
artisticcheese said:
I used Unlock and CID Unlock, both went fine. Now IPL 1.01 SPL 2.26 OS 1.5.4.2.
Do I need to upgrade to 2.X before upgrading to WM6 or I can run upgrade the way it is now? Do I need to upgrade IPL (whatever it is to 2.26 as it was before?)
THanks,
Click to expand...
Click to collapse
Right now you need to install the button rom again to get both IPL and SPL to 1.05. At that point you can flash back up to 2.26 and then to a custom rom of your choice.
The reflash of the button 1.05 rom is to ensure that you are truly unlocked. you will see that both IPL and SPL go to 1.05 -- this is good
The flash to a carrier 2.x rom is so that you have a good 2.x bootloader and don't inadvertantly flash a 2.x rom without bootloaders into 1.x bootloaders which will cause all kinds of issues.
Yes, you must flash a full 2.x rom before flashing the wm6 rom. The T-Mobile 2.26 is the recommended rom as it has the latest bootloaders available.
Then you go to the rom of your choice and enjoy
I know it's a pain in the behind but it is tried and true
Thanks,
This worked. The only issue now after I installed WM6 it starts installing some T-Mobile crap which appears belongs to 2.26 ROM I installed before. How can I clean install of WM6 without any T-Mobile stuff?
Thanks,
artisticcheese said:
Thanks,
This worked. The only issue now after I installed WM6 it starts installing some T-Mobile crap which appears belongs to 2.26 ROM I installed before. How can I clean install of WM6 without any T-Mobile stuff?
Thanks,
Click to expand...
Click to collapse
Might have to flash a rom that has an empty extended rom before going to the one you went to. My guess is that the rom you flashed did not include an extended rom and when you flashed it the customizations ran from the previous roms extended rom since it was still there.
Faria's 3.3 v2 has a settings chooser menu so you can select settings for whichever network you are on but that only sets up MMS/GPRS stuff, and doesn't install any carrier specific apps.
Never mind, I recovered using some old iMate ROM. The problem now is that iMate ROM updated SPL/IPL to 2.16 while I had 2.26 for both before. Is it ok to run with 2.16 or there might be some issues? What is SPL/SPL are used for?
artisticcheese said:
Never mind, I recovered using some old iMate ROM. The problem now is that iMate ROM updated SPL/IPL to 2.16 while I had 2.26 for both before. Is it ok to run with 2.16 or there might be some issues? What is SPL/SPL are used for?
Click to expand...
Click to collapse
2.16 should be fine. It is 2.xx and that is what really matters.
The issue that some people encounter is flashing an AKU2 or higher ROM into 1.xx bootloaders and have all sorts of issues, phone won't charge, radio doesn't show up, pda works but phone doesn't, battery drains quickly and no way to recharge, etc.
is there anyway to "shelltools" flash my radio rom? I've been missing a lot of calls lately and it really is becoming inconvenient. I havent unlocked my phone, but i am running wm6 using shelltools (mfrazzz's stuff) and i was wondering do i even need to have my phone unlocked to flash my radio? i dont want to lose my warranty so thats why this matters to me. Any ideas guys?
You may get the official (in your case, T-Mobile, I guess) ROM to flash your phone with the full set of WM5 ROM (e.g. IPL, SPL, OS and Radio). As you are using the official ROM, you do not have to CID-unlock your phone prior flashing this official ROM. After that, you may then use shelltool to update/upgrade/flash the WM6 in, while the radio is untouched (e.g. still using the one you've flashed with the official ROM).
i thin i have done what you said already. Before i flashed mfrazzz's wm6 rom i flashed the latest tmobile rom, then i proceeded to flash the wm6 rom. I didnt use shelltools to flash the official tmobile rom obviosuly, but i did use shelltools to flash mrazzz's wm6 rom.
these are my things from what i'm using now:
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
ur OS is wrong if ur running wm6...
2.18 is Crossbow Reloaded... or Faria's..
Madcap180 said:
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
Click to expand...
Click to collapse
can i just flash that right now without being unlocked? i'm in boston, does that matter? lol
Madcap180 said:
2.18 is Crossbow Reloaded... or Faria's..
Click to expand...
Click to collapse
oh, my bad then lol.
and yes u can change ur radio without being unlocked
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
There you go
jawnsixteen said:
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
Click to expand...
Click to collapse
I have flashed my RADIO ONLY several times with no consequences for my CID LOCKED G4 Wizard, here´s the link for the RADIO ONLY
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
4irm said:
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
Click to expand...
Click to collapse
No, we can´t flash a ROM with bootloader other than the one you have if you have a G4 CID locked device. Unless you use a RUU with no ID (see next paragraph) and the nb.nkf file lacks of IPL/SPL, such is the case of the Wizard Love which I use before to flash any other ROM with the Shell Tool.
Read post #2 of this thread
http://forum.xda-developers.com/showthread.php?t=310954
Read carefully where talks about Splash Screens and Splash Only RUU for G4, same procedure for splash screen applies to RADIO. This doesn´t work for OS, for OS you have to use Shell Tool.
Good luck!