I flashed my firmware with one of the Cingular firmwares. (my mda was already unlocked) Now when I try to use one of the tmobile firmwares to flash back it gives me an error. This is what I have installed now.
Rom 1.8.10.12
Rom date 12/1/05
Radio version 02.13.11
Protocol 4.1.13.05
IPL 2.21
SPL 2.25
GSM 02.13.11
OS 1.8.10.2
Can anyone tell me what is going on here. The phone is working and the data services work. I need someone to post the link to the best firmware flash for my TMOBILE MDA (us version) I have service with Cingular. I need the ROM that has the best receiption and performance and the most features that will work on my MDA Please help.
if you want to go back to the T-Mobile original settings, you need to upgrade to the custom ROM and then downgrade back. If you just want to have the T-Mobile settings, stick with the 2.17 custom rom that Xelecin cooked. I've found that his 2.21 rom was a lttle buggy, but his 2.17 rom is spot on. It has the cid/sim unlockers built in.
good luck
ftp://ftp.xda-developers.com/Wizard/Roms/Tmobile/
user id: XDA
PW: xda
Another Question
I did that and gave the MDA to my wife. I am looking to get a new phone and lookng at the Cingular 8125. Will I be able to unlock this phone with any of the utilities on this site.
I recently upgraded my US MDA to 2.21. I think I'm stuck there because I didn't unlock it beforhand. Can I still upgrade (or downgrade) to another version... official or not?
You'll always be able to upgrade using Official Roms also if you check this thread:
http://forum.xda-developers.com/viewtopic.php?t=56088
You'll see a way to upgrade Radio, OS & extended Rom without upgrading IPL/SPL (bootloader) which is where the CID resides.
BTW, where did you get T-Mobile UK 2.26 Rom?
I think I got confused.. It's actually 2.21.2.6.
Thanks for the link I'll give it a try!
okay i've successfully unlocked my sim and cid on my cingular 8125. i wanted to do this because i wanted to use a qtek 9100 rom. however i don't know which 9100 rom to download. which one is the latest one? i'm so lost now. also now i don't have any signal on my phone. i think its because i have to download the radio rom.
another question i have is... should i download the cingular radio rom or the tmobile radio rom since i am using a tmobile sim???
is there anyway to "shelltools" flash my radio rom? I've been missing a lot of calls lately and it really is becoming inconvenient. I havent unlocked my phone, but i am running wm6 using shelltools (mfrazzz's stuff) and i was wondering do i even need to have my phone unlocked to flash my radio? i dont want to lose my warranty so thats why this matters to me. Any ideas guys?
You may get the official (in your case, T-Mobile, I guess) ROM to flash your phone with the full set of WM5 ROM (e.g. IPL, SPL, OS and Radio). As you are using the official ROM, you do not have to CID-unlock your phone prior flashing this official ROM. After that, you may then use shelltool to update/upgrade/flash the WM6 in, while the radio is untouched (e.g. still using the one you've flashed with the official ROM).
i thin i have done what you said already. Before i flashed mfrazzz's wm6 rom i flashed the latest tmobile rom, then i proceeded to flash the wm6 rom. I didnt use shelltools to flash the official tmobile rom obviosuly, but i did use shelltools to flash mrazzz's wm6 rom.
these are my things from what i'm using now:
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
ur OS is wrong if ur running wm6...
2.18 is Crossbow Reloaded... or Faria's..
Madcap180 said:
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
Click to expand...
Click to collapse
can i just flash that right now without being unlocked? i'm in boston, does that matter? lol
Madcap180 said:
2.18 is Crossbow Reloaded... or Faria's..
Click to expand...
Click to collapse
oh, my bad then lol.
and yes u can change ur radio without being unlocked
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
There you go
jawnsixteen said:
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
Click to expand...
Click to collapse
I have flashed my RADIO ONLY several times with no consequences for my CID LOCKED G4 Wizard, here´s the link for the RADIO ONLY
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
4irm said:
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
Click to expand...
Click to collapse
No, we can´t flash a ROM with bootloader other than the one you have if you have a G4 CID locked device. Unless you use a RUU with no ID (see next paragraph) and the nb.nkf file lacks of IPL/SPL, such is the case of the Wizard Love which I use before to flash any other ROM with the Shell Tool.
Read post #2 of this thread
http://forum.xda-developers.com/showthread.php?t=310954
Read carefully where talks about Splash Screens and Splash Only RUU for G4, same procedure for splash screen applies to RADIO. This doesn´t work for OS, for OS you have to use Shell Tool.
Good luck!
Well after finally trying to upgrade my rom i am now stuck at the screen with red green and blue that shows my IPL and SPL.
Can someone tell me where and what rom i can use. So far all the ones i have tried dont work
here are my specs before updating,
IPL/SPL 2.26
gsm 2.25.11
Os 2.26.10.2
I need to get this fixed asap as this is my only phone. Please help!!!!
Turn into bootloader and up Official ROM.
Try it if your wizard is T-Mobile Variop.
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
Also make sure your Storage card is removed before you flash.
Is your phone CID unlocked?
I had a molski rom working on it before i just wanted to update cause alot of things stopped working. I use cingular service so i cant use the tmobile rom. I have installed the tmobile rom so i know it will take a rom. Im just having a hard time getting anything new to work. the CID was unlocked at one time will that change when i tried to upgrade or reinstalled the tmobile rom?
prophit40 said:
I had a molski rom working on it before i just wanted to update cause alot of things stopped working. I use cingular service so i cant use the tmobile rom. I have installed the tmobile rom so i know it will take a rom. Im just having a hard time getting anything new to work. the CID was unlocked at one time will that change when i tried to upgrade or reinstalled the tmobile rom?
Click to expand...
Click to collapse
No, you should not have to unlock it again, unless you burned the button 1.05 rom again. Then you have to unlock it again.
so which rom which i try? Its a T-mobile MDA G3 and im using it for cingular service?