While listing to music and a call comes in or is made, does the BT switch between the two profiles(Headset/BT Stereo)? Because after the call ends music resumes but unable to hear without re-establishing stereo connection by double clicking BT stereo play button or otherwise. Are there any work around tweaks for this?
Also PocketPlayer does resume ok after calls, only not able to control with stereo headdset. Puzzling??????????
yes it switches
for me it works fine and music resumes after the call
it may be due to your headset as different ones have given different experiences
which ones are you using?
Related
Anyone got it to work? the BT headphones work fine as long as the device is 'switched on', if I switch the screen off it pauses playback, but only with BT headphones, works fine through wired headphones.
Any ideas?
I haven't had that problem at least when listening to music, but I only have headphones at the moment so thats all i use them for.
I am using the Plantronics 590A, and I am able to switch the power on and off from the phone during music playback just fine. The music keeps playing over bluetooth.
Odd then, got some sony BT headphones, and if I turn off the screen, then it stops.
Hmmm, have to have a dig around and see if I can work out what the problem is, what ROM's are you guys running, oh and remember this only effects the BT A2DP headphones, works fine with wired.
What player are you using?
The work around that works for BOTH WMP and AudioManager is to also install Advanced Configuration. Advanced Configuration includes some helpful shortcuts. ONe of these short cuts is callled "Turn off screen." This shortcut will be available in Settings/Buttons, so just assign it to one of your less important buttons (I use PTT Hold). Viola, when you want to shut off the screen, just use the hardware button and both players will continue to play AND over BT.
Ron
Just FYI, using a prophet and I have the opposite behaviour, ie it stops if A2DP is disabled.
I like to listen to music or the radio (Resco) with my Jawbone or other BT headset.
I also like to occasionally use Voice Speed Dial by tapping on my BT headset and speaking a name to dial.
How does one turn one of those functionalities off or just switch between the two. (? registry setting). When I have the single ear BT headset on and want to have the music on the Kaiser switch to the headset by tapping on the headset - voice speed dial starts instead.
Obviously, the S9 stereo headset can do both - as you pair it show that you can choose both but other single ear BT headsets do not have a option for wireless music.
I have used it in the past with my old HTC Universal - it was a registry setting change - but that setting is not there in the Kaiser. (HKLM/Software/OEM/Voicecommand/launchapenable (changing 1 to 0) made this work).
Any ideas?
Maybe the question should be - how does one turn Voice Speed Dial off?
Sorry I have no answer that really helps but one thing is clear to me is the difference between one-ear BT headsets and stereo (S9 like) bt headset : they don't use the same bluetooth profile.
the one-ear one connects via the Headset profile and the stereo ones connect with the A2DP one (stereo bluetooth).
My 2 cents : Jabra has released a headset made of two parts : this is a stereo a2DBheadset that brings stereo by connecting a separate earphone to the first one. It sure brings headphone and A2DP bluetooth profiles : maybe it can be used with A2DP profile with only one ear linked ?
Whenever I turn my Cardo S-2 a2dp stereo bluetooth headphones on, the headset bluetooth profile kicks in, and calls immediately go to the headphones.
Can this be done with the bluetooth stereo headphones profile for listening to music as well? Currently, I have to click on BatteryStatus's bluetooth icon in the systray, click on a2dp, wait for the profile to kick in, and turn the volume from vibrate to full. It's a pain in the ass every time I want to listen to music.
Ideally, if it's not built into the OS, there should be a little systray app that would poll to see if any headphones are within range, then automatically enable a2dp and set the volume for you. When they disconnect, it would go back to your previous volume setting, not just 0 volume like it does now.
I don't know about the Cardo's but when I hook up my Motorola S9 my music is automatcally hooked up as well. When you sinked your Cardo with your phone through the Bluetooth conection settings did you set them up as handsfree and Stereo, or just Handsfree?
kemp509 said:
I don't know about the Cardo's but when I hook up my Motorola S9 my music is automatcally hooked up as well. When you sinked your Cardo with your phone through the Bluetooth conection settings did you set them up as handsfree and Stereo, or just Handsfree?
Click to expand...
Click to collapse
Yes, it was set up as stereo (as well as handsfree), but music does not automatically play in the headphones when they are turned on. I have to start a2dp and take it off vibrate in order to play music.
Same problem here. I solved it by installing A2DPToggle, and making a shortcut to turn the music on the headset in the system tray through Traylaunch
I also use A2DPToggle and use the plugin that stays on the Today screen to control when I use it.
But just like this thread ( http://forum.xda-developers.com/showthread.php?t=351697 ) you can find all sorts of different options.
MBN
Hi everybody.
I searched but did not found answer to issue I having.
If I turned on BT my bt headset (A2DP) works fine, but on incoming call there is no ring sound on telephone speaker. When I checked phone i could see that is muted. My wild guess is that phone sends everything to headset because it is in A2DP mode and send every sound through BT.
How to fix this?
Headset?
Is your Bluetooth headset designed to handle calls as well as music? If not, that will be your problem. When I'm listening to music via BT headset, the phone rings through the headset, not the device speaker
grahamkdt said:
Is your Bluetooth headset designed to handle calls as well as music? If not, that will be your problem. When I'm listening to music via BT headset, the phone rings through the headset, not the device speaker
Click to expand...
Click to collapse
My bt headset is designed to handle calls.
http://www.sonyericsson.com/cws/products/accessories/overview/hbh-ds220?cc=CA&lc=en
What I want is to hear ring signal through device speakers as well as I don't have all time earpieces in my ears and I can miss a call
I recently purchased a Sony bluetooth PS3 headset which also pairs fine with my Note. Calls are working great but the headset doesn't support the streaming of any other sounds apparently.
There're a few apps (BTMono and Mono Bluetooth Router for example) that are supposed to 'fix' this issue but they don't work on my Note. I'm using Slimrom 4.2.2 build 8. I don't get any error messages from the apps, they seem to activate correctly but no audio is being played through the headset.
Does anyone have an idea on how to fix this? I would just like to hear my gps navigation through my bluetooth because I have a very loud car and can't hear the nav when my phone is mounted on my dashboard.
Thanks in advance.
I've had a similar issue with a bluetooth headset at work - I imagine fixing this would involve diverting TTS/Music/whatever audio stream to the phone call audio stream. I've tried looking at Tasker, and frustratingly you can tell it to play a single file over the call stream, but can't set a perminant "divert notifications to call" or similar setting. Not as far as i can see.