Hi,
a few days ago i wrote on this forum that i had been able to install an italian ROM on a G4, CID-Locked Wizard. Since then, i've received several mails and PM from users asking me how i did. Instead of replying each one, i though it was better to write a tutorial and post it here for everyone to read/comment/correct it.
Here it is. Together with the tools you'll need to perform the update.
PS: in this tutorial i'm not explaining how to CID-UNlock a G4 or G3 (>= 2.21) phone. There is not yet a way to CID unlock these phones. I'm just describing how to circumvent the CID-lock problem by installing a ROM deprived of the IPL and SPL parts.
DISCLAIMER: THE PROCEDURE I’M GOING TO EXPLAIN DEALS WITH ROM ‘COOKING’ AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
By following this tutorial, you're removing both the bootloaders (IPL and SPL) from a rom of your choice. This means that, if you don't make errors while 'cooking' the rom, you cannot completely destroy (brick) your phone. Sure, you could end up with a non-booting rom but, as long as you can get to the three colors screen (the bootloader screen) you'll always be able to install a different (or your previous) working rom.
On the other hand, messing with IPL and SPL (i.e. installing a rom containing IPL and SPL in a CID locked device) is EXTREMELY DANGEROUS and MUST be avoided in most cases!!!
Installing a 2.xx rom without messing with your phone's IPL and SPL is exactly what this tutorial tries to explain.
NEVER INSTALL ROMS OR FOLLOW TUTORIALS IF YOU'RE NOT SURE OF WHAT YOU'RE DOING!!!
ALWAYS ASK BEFORE PROCEEDING! A SIMPLE QUESTION MAY SAVE YOUR PHONE FROM DEATH!
Worked perfect!
Thank you very much for the clear explanation!!! 8)
HI,
Have I to introduce on nb2nbf SW the ITA language without CID??
squarna said:
HI,
Have I to introduce on nb2nbf SW the ITA language without CID??
Click to expand...
Click to collapse
Leave the CID field empty and specify the language you're installing (ITA for italian, WWE for english).
Hi,
I have installed this SW on my MDA T-mobile:
IPL:2.21.0001
SPL:2.21.0001
GSM:2.19.11
OS:2.21.2.6
EXROM:2.21.2.109
What is the best Italian ROM to flash inside?
squarna said:
Hi,
I have installed this SW on my MDA T-mobile:
IPL:2.21.0001
SPL:2.21.0001
GSM:2.19.11
OS:2.21.2.6
EXROM:2.21.2.109
What is the best Italian ROM to flash inside?
Click to expand...
Click to collapse
This is quite Off Topic here, anyway you can use K-Jam 2.18 italian ROM (find it here: ftp://ftp.clubimate.com/K-JAM_ITA_2180901_21809104_20710_ship.zip)
German to WWE
Worked perfect, no glitches! Thanks for the help!
So is there any issues with using a mismatched ipl/spl bootloader on my G4 equipped O2 mini S?
I really want to install Mr. Clean's Clean ROM, but i am afraid of bricking it.
I have done ROm upgrades before by CID unlocking my old Qtek9100 G3 (but my foolish friend dropped it into a cup of coffeee and killed it).
I will admit, the Mr. CLean Rom was WAY faster than my OE 2.21 ROm on my O2.
Is there anyway to go back and uninstall? Ie. download rom from O2 website to restore it?
REgards,
ED
minirx7 said:
So is there any issues with using a mismatched ipl/spl bootloader on my G4 equipped O2 mini S?
I really want to install Mr. Clean's Clean ROM, but i am afraid of bricking it.
I have done ROm upgrades before by CID unlocking my old Qtek9100 G3 (but my foolish friend dropped it into a cup of coffeee and killed it).
I will admit, the Mr. CLean Rom was WAY faster than my OE 2.21 ROm on my O2.
Is there anyway to go back and uninstall? Ie. download rom from O2 website to restore it?
REgards,
ED
Click to expand...
Click to collapse
You CAN install MrClean AKU2.3 ROM BUT only if you first modify it following my guide: you cannot touch the IPL/SPL parts!!!
There are two reasons for not installing the original, unmodified MrClean ROM:
1) G4 phones cannot be CID unlocked. This means that you can replace their original IPL/SPL ONLY with a newer version made by the very same operator: e.g. if you have a 2.21 WWE T-mobile ROM then you can ONLY update this rom with a version > 2.21 made by T-mobile!!! You CANNOT use any other language nor any other operator's ROMs (cingular's, qtek's, etc).
2) MrClean ROM, as all the other home made ROMs you'll find in this forum, can be installed ONLY in G3 models because it contains only IPL and SPL version 1.0 (G4 phones need version 2.0)
Basically then, you have only 3 choices:
a) Follow my tutorial and be able to install every 2.x ROM you like (both stock ROMs and home made ones, every language, every operator). The only limitation is that you cannot install 1.x ROMs!
b) Install ONLY ROMs that are the OFFICIAL update to the one you have currently installed (e.g. if you have cingular 2.25 WWE rom then you'll be able to update it only when and if, a new, official, wwe, cingular ROM will be released). You won't be able to install a different language ROM nor a ROM made by a different operator, nor a home made ROM (like MrClean).
c) you can CID unlock your G4 wizard using some online service but: it will cost you money and you won't still be able to install home-made ROM 'cos they contain only IPL/SPL version 1.0 (you'll still need IPL/SPL version 2.0)
That said, i strongly suggest you solution (a)! It's free, it's very simple (it may seem complex but after the first time it'll be straight forward), it's the safest (because you don't replace the boot loader IPL and SPL) and it let you install whichever 2.x ROM you like!
Bye
Thank you risidoro,
Yes, i do realize the G4 IPL/SPL must not be altered to prevent from bricking the device.
I will try the Mr. Clean ROM tonight using your tutorial. I guess my only question is, will there be an issue using a 2.21 G4 IPL SPL on a 2.24ROM?
DOes the bootloader actual change with new ROMS?
risidoro said:
minirx7 said:
So is there any issues with using a mismatched ipl/spl bootloader on my G4 equipped O2 mini S?
I really want to install Mr. Clean's Clean ROM, but i am afraid of bricking it.
I have done ROm upgrades before by CID unlocking my old Qtek9100 G3 (but my foolish friend dropped it into a cup of coffeee and killed it).
I will admit, the Mr. CLean Rom was WAY faster than my OE 2.21 ROm on my O2.
Is there anyway to go back and uninstall? Ie. download rom from O2 website to restore it?
REgards,
ED
Click to expand...
Click to collapse
You CAN install MrClean AKU2.3 ROM BUT only if you first modify it following my guide: you cannot touch the IPL/SPL parts!!!
There are two reasons for not installing the original, unmodified MrClean ROM:
1) G4 phones cannot be CID unlocked. This means that you can replace their original IPL/SPL ONLY with a newer version made by the very same operator: e.g. if you have a 2.21 WWE T-mobile ROM then you can ONLY update this rom with a version > 2.21 made by T-mobile!!! You CANNOT use any other language nor any other operator's ROMs (cingular's, qtek's, etc).
2) MrClean ROM, as all the other home made ROMs you'll find in this forum, can be installed ONLY in G3 models because it contains only IPL and SPL version 1.0 (G4 phones need version 2.0)
Basically then, you have only 3 choices:
a) Follow my tutorial and be able to install every 2.x ROM you like (both stock ROMs and home made ones, every language, every operator). The only limitation is that you cannot install 1.x ROMs!
b) Install ONLY ROMs that are the OFFICIAL update to the one you have currently installed (e.g. if you have cingular 2.25 WWE rom then you'll be able to update it only when and if, a new, official, wwe, cingular ROM will be released). You won't be able to install a different language ROM nor a ROM made by a different operator, nor a home made ROM (like MrClean).
c) you can CID unlock your G4 wizard using some online service but: it will cost you money and you won't still be able to install home-made ROM 'cos they contain only IPL/SPL version 1.0 (you'll still need IPL/SPL version 2.0)
That said, i strongly suggest you solution (a)! It's free, it's very simple (it may seem complex but after the first time it'll be straight forward), it's the safest (because you don't replace the boot loader IPL and SPL) and it let you install whichever 2.x ROM you like!
Bye
Click to expand...
Click to collapse
minirx7 said:
Thank you risidoro,
Yes, i do realize the G4 IPL/SPL must not be altered to prevent from bricking the device.
I will try the Mr. Clean ROM tonight using your tutorial. I guess my only question is, will there be an issue using a 2.21 G4 IPL SPL on a 2.24ROM?
DOes the bootloader actual change with new ROMS?
Click to expand...
Click to collapse
Bootloader and ROM version numbers usually are the same (so ROM 2.24 should have IPL/SPL 2.24) but they can be different. I've used IPL/SPL 2.21.001 with both 2.18 and 2.24 ROMs.
Maybe newer ROMs, greater than 2.24, will require an updated IPL/SPL so you'll be obliged to CID unlock your phone. By then however, i hope there'll be a free CID unlocking tool for G4.
bye
Thank you risidoro!! I was regretting getting my O2 miniS G4, in place of my broken Qtek 9100 G3.
I will give it a shot tonight. I noticed that the 2.24 ROM was much faster when I used it on my Qtek, over any other ROM.
Regards
risidoro said:
minirx7 said:
Thank you risidoro,
Yes, i do realize the G4 IPL/SPL must not be altered to prevent from bricking the device.
I will try the Mr. Clean ROM tonight using your tutorial. I guess my only question is, will there be an issue using a 2.21 G4 IPL SPL on a 2.24ROM?
DOes the bootloader actual change with new ROMS?
Click to expand...
Click to collapse
Bootloader and ROM version numbers usually are the same (so ROM 2.24 should have IPL/SPL 2.24) but they can be different. I've used IPL/SPL 2.21.001 with both 2.18 and 2.24 ROMs.
Maybe newer ROMs, greater than 2.24, will require an updated IPL/SPL so you'll be obliged to CID unlock your phone. By then however, i hope there'll be a free CID unlocking tool for G4.
bye
Click to expand...
Click to collapse
THANK YOU THANK YOU!!!
I HAVE SUCCESSFULLY INSTALLED MR. CLEAN 2.24A ON MY G4 DEVICE!!!!
THe ROM is so much faster and smoother than the OE 2.21 ROM!!! tahnks again!
risidoro did you SIM unlock your G4 phone ? If yes what tool and version did you use to do that ?
jeegnesh said:
risidoro did you SIM unlock your G4 phone ? If yes what tool and version did you use to do that ?
Click to expand...
Click to collapse
My two phones were both factory simunlocked but i heard that some people is successfully using LokiwizMSL 0.3a to sim unlock G4 wizards.
Just follow the author's instruction. The procedure is staightforward.
Find it here: http://forum.xda-developers.com/viewtopic.php?t=50768&highlight=lokiwiz
Bye
Thanks for the superfast reply, actually waiting for someone to get me this phone, hopefully this week, wil try it out once I get it.
Using Clean ROM, does it just improve startup time, or does it improve performace of the phone in general ?
Do you have to re-install software after ROM update ?
jeegnesh said:
Thanks for the superfast reply, actually waiting for someone to get me this phone, hopefully this week, wil try it out once I get it.
Using Clean ROM, does it just improve startup time, or does it improve performace of the phone in general ?
Do you have to re-install software after ROM update ?
Click to expand...
Click to collapse
Upgrading the OS part of a ROM cause your phone to hard reset, so yes, you'll have to reinstall everything. If, on the other hand, you upgrade any other part (GSM, Splash, ExtROM, HTC) but not the OS then you won't loose your data.
MrClean ROM and Summitter's ROM are both very fast. The latter contains cingular's customizations in extROM (they don't slow down the phone, they're mainly registry settings), some ringtones and compact framework 2.0 in ROM. If you're not a cingular user then i suggest you take the OS part from summitter's rom and the extrom from the MrClean. Then join the two parts with nb2nbf and flash to your device.
Bye
Any reason to take Summitter's OS is it faster or something then Mr Clean ?
jeegnesh said:
Any reason to take Summitter's OS is it faster or something then Mr Clean ?
Click to expand...
Click to collapse
No. Both summitter and mrclean use the same OS ROM (2.24.10 AKU2.3) hence they have the SAME, IDENTICAL speed.
The difference is that Summitter manually edited the original ROM and added a lot of ringtones, themes and, most important, the .net compact framework 2.0. If you install Summitter OS, then, you'll have the same mrclean basic OS plus a lot of goodies that don't take any space in storage since they're in ROM (compact framework 2.0 alone would take about 5mb of your precious storage if you installed it on mrclean).
bye
This thread needs to be a sticky!!
After spend a fews days read so manys thread. i have some question here may be you can help out the newbie here.Thanks
SIM i use now is original AT&T . The phone is unloock.
IPL 2.17
SPL 2.17
GSM 02.17.10
rom ver. 2.17.7.2 wwe
radio 02.07.10
1. What application name i need to splash the ROM?where can i down load.
2. Is my phone is G3 or G4.
3. Is the current rom now 2.26 can i use Tmobil for cingular
forme said:
After spend a fews days read so manys thread. i have some question here may be you can help out the newbie here.Thanks
SIM i use now is original AT&T . The phone is unloock.
IPL 2.17
SPL 2.17
GSM 02.17.10
rom ver. 2.17.7.2 wwe
radio 02.07.10
1. What application name i need to splash the ROM?where can i down load.
2. Is my phone is G3 or G4.
3. Is the current rom now 2.26 can i use Tmobil for cingular
Click to expand...
Click to collapse
1. There are a variety of cooked ROMs throught the forum. when you are signed in to your account you will see attached files, also many of the chefs put links directly on the first page when they introduce a new ROM.
2. Your phone is G3, G4 phones have the IPL/SPL in the format of 2.xx.0001.
3. The current ROM is 2.26, the basic OS is pretty much the same between the carriers, the difference lies in the ext ROM.
This is my understanding, I'm sure I will be corrected if wrong.
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
sailors_be said:
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
Click to expand...
Click to collapse
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
More info required.
When having problems with Rom Upgrades you really need to provide as much information as possible about your situation.
Please state the following:
What Rom did you have prior to upgrading, include IPL/SPL numbers.
Do you know if your device is G3 or G4 flash chip?
Is your device CID Unlocked?
Have your read (thoroughly) the instructions provided for the Rom you attempted to upgrade?
My initial guess would be that the Rom you flashed doesn't include IPL/SPL (as Risidoro clearly states in the Original Post (http://forum.xda-developers.com/showthread.php?t=276700)
In this case, you need to flash one of the Operator provided AKU 2.x Roms to get your IPL/SPL up to 2.x BEFORE you flash Risidoro's Rom to your device.
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
I'm going to give you some general info but you will have to do your own leg work to put this together.
The Wizard Wiki will contain some of the information you need:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see the stickied posts at the beginning of the Wizard upgrading forum.
I am assuming that your device is not properly CID Unlocked (although it may be doing it again will not harm your device).
First you will need to download an Operator Rom, I would suggest this one:
ftp://xda:[email protected]_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
as it is an official Qtek AKU 1.x Rom.
Second place your Device into Bootloader Mode (search on it) and run the update that you downloaded.
At this point you are pretty close to where you were when you started.
Now, CID Unlock your Phone! Use this thread:
http://forum.xda-developers.com/showthread.php?t=249474
If you have followed the instructions and everything went okay then you can now flash any of the Roms you (except one that are marked as G4 only since you appear to have a G3 Device).
sailors_be said:
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
Click to expand...
Click to collapse
Looks like you flashed a 2.xx rom with no bootloader into a 1.xx system.
First try a full 2.xx rom from a carrier (cingular 2.25 comes to mind) then reflash the rom you want. Be careful playing with the phone in the current state as the battery will drain and not re-charge. I had to have a friend charge my battery for me when I did this same thing.
many thanks
I followed the procedure you give and recuperated my phone.
Thanks a lot for the assistance.
Merry christmas and happy new year
Jean-Michel
I downloaded Viet4 and run upgrade, on welcome screen on PC during upgrade it does not correctly detect my Wizard and shows as ROM 1.0.0 and for new version it says only blanks.
After upgrade device just boots to previous version of the ROM (2.26). What am I doing wrong?
Let me be the first one to say it before someone else does... Read the Wiki
Joking aside, you need to give more info such as do you have a G3 or G4? Did you CID unlocked your device? The error you have given usually meant that your device is CID locked.
artisticcheese said:
I downloaded Viet4 and run upgrade, on welcome screen on PC during upgrade it does not correctly detect my Wizard and shows as ROM 1.0.0 and for new version it says only blanks.
After upgrade device just boots to previous version of the ROM (2.26). What am I doing wrong?
Click to expand...
Click to collapse
sounds like you didn't CID unlock before trying to flash a rom that didn't come from your carrier.
and the upgrade tool will not have the right info in those fields. If your phone is unlocked the upgrade will work properly. Make sure you use the correct procedure based on whether you have a G3 or G4 phone.
I have G3 device
I have Qtek 9100 which was never locked of course. Then I installed ROM and radio upgrade with versions below
ROM version: 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
Hardware:
CPU:OMAP850
Flash chip type:M-Systems
What do I do now?
artisticcheese said:
I have Qtek 9100 which was never locked of course. Then I installed ROM and radio upgrade with versions below
ROM version: 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
Hardware:
CPU:OMAP850
Flash chip type:M-Systems
What do I do now?
Click to expand...
Click to collapse
What is your IPL/SPL. And how do you know it was never locked? Have you personally unlocked it? Have you ever flashed any rom that was not from your carrier successfully?
If you have a G3 (ipl/spl 2.26/2.26) then I suggest following the full unlocking tutorial thread that is stickied. Trust me your phone is acting like a locked phone. If you haven't personally unlocked it then just humor us and do this. You will be amazed at the results.
If you have a G4 (ipl/spl 2.26.0001/2.26.0001) then you will have to use the pay website to unlock your phone. There is no other known way to unlock G4 devices at this time.
I assume since it was bought in Russia and branded as Qtek 9100 then it was not locked. Is it possible that ROM upgrade to Cingular ROM actually locked my phone?
SPL 2.26/2.26
I going through downgrade right now and then do CID unlock. Do I have to do SIM unlock as well? How do I know if device is unlocked?
artisticcheese said:
I assume since it was bought in Russia and branded as Qtek 9100 then it was not locked. Is it possible that ROM upgrade to Cingular ROM actually locked my phone?
SPL 2.26/2.26
I going through downgrade right now and then do CID unlock. Do I have to do SIM unlock as well? How do I know if device is unlocked?
Click to expand...
Click to collapse
SIM unlock will allow you to use any sim from any carrier without getting an invalid sim error. If you aren't getting this error already you should be ok not doing it but it doesn't hurt to do it since you are in there with Lokiwiz already.
The tutorial tells you to do the SIM unlock first then do the CID unlock.
once you are completely done don't forget to flash up to a 2.x rom (2.26 T-Mobile rom suggested) before flashing a custom rom.
At this point when you flash the custom rom your OS and possibly GSM will change (IPL/SPL may change if you use a rom that includes them)
You should be good to go once the CID unlock process is done completely.
I used Unlock and CID Unlock, both went fine. Now IPL 1.01 SPL 2.26 OS 1.5.4.2.
Do I need to upgrade to 2.X before upgrading to WM6 or I can run upgrade the way it is now? Do I need to upgrade IPL (whatever it is to 2.26 as it was before?)
THanks,
artisticcheese said:
I used Unlock and CID Unlock, both went fine. Now IPL 1.01 SPL 2.26 OS 1.5.4.2.
Do I need to upgrade to 2.X before upgrading to WM6 or I can run upgrade the way it is now? Do I need to upgrade IPL (whatever it is to 2.26 as it was before?)
THanks,
Click to expand...
Click to collapse
Right now you need to install the button rom again to get both IPL and SPL to 1.05. At that point you can flash back up to 2.26 and then to a custom rom of your choice.
The reflash of the button 1.05 rom is to ensure that you are truly unlocked. you will see that both IPL and SPL go to 1.05 -- this is good
The flash to a carrier 2.x rom is so that you have a good 2.x bootloader and don't inadvertantly flash a 2.x rom without bootloaders into 1.x bootloaders which will cause all kinds of issues.
Yes, you must flash a full 2.x rom before flashing the wm6 rom. The T-Mobile 2.26 is the recommended rom as it has the latest bootloaders available.
Then you go to the rom of your choice and enjoy
I know it's a pain in the behind but it is tried and true
Thanks,
This worked. The only issue now after I installed WM6 it starts installing some T-Mobile crap which appears belongs to 2.26 ROM I installed before. How can I clean install of WM6 without any T-Mobile stuff?
Thanks,
artisticcheese said:
Thanks,
This worked. The only issue now after I installed WM6 it starts installing some T-Mobile crap which appears belongs to 2.26 ROM I installed before. How can I clean install of WM6 without any T-Mobile stuff?
Thanks,
Click to expand...
Click to collapse
Might have to flash a rom that has an empty extended rom before going to the one you went to. My guess is that the rom you flashed did not include an extended rom and when you flashed it the customizations ran from the previous roms extended rom since it was still there.
Faria's 3.3 v2 has a settings chooser menu so you can select settings for whichever network you are on but that only sets up MMS/GPRS stuff, and doesn't install any carrier specific apps.
Never mind, I recovered using some old iMate ROM. The problem now is that iMate ROM updated SPL/IPL to 2.16 while I had 2.26 for both before. Is it ok to run with 2.16 or there might be some issues? What is SPL/SPL are used for?
artisticcheese said:
Never mind, I recovered using some old iMate ROM. The problem now is that iMate ROM updated SPL/IPL to 2.16 while I had 2.26 for both before. Is it ok to run with 2.16 or there might be some issues? What is SPL/SPL are used for?
Click to expand...
Click to collapse
2.16 should be fine. It is 2.xx and that is what really matters.
The issue that some people encounter is flashing an AKU2 or higher ROM into 1.xx bootloaders and have all sorts of issues, phone won't charge, radio doesn't show up, pda works but phone doesn't, battery drains quickly and no way to recharge, etc.
I got an i-Wireless HTC 4300 (Wizard) with the original settings of:
IPL 2.28.0001
SPL 2.28.0001
OS 2.28.18.1
GSM 02.25.11
WM 5.1.195
I had successfully flashed a 2.71.11 radio rom and upgraded to WM 6.1 but for some unknown reason I still felt the need to tinker. I tried installing an official t-mobile rom to the device and I am currently looking at a phone with an
IPL. 2.21.0001
SPL. 2.21.Olip
GSM 2.71.11
OS 3.8.2.1
Is there any hope for my phone, or am I going to have to tell my wife I just blew $300 bucks?
Please tell me there's hope...
Thankfully, I figured this out.
I was still able to get to the bootloader screen, but no further and I read on another post somewhere (sorry I don't remember where) on this site that if you can get to the boot loader it's possible to use the RUU update utility to flash a new rom.
So I flashed the wizard love rom, brought my phone back from the coma and allowed me to update to other roms. I'm currently testing the TNT Professional. I might try the vanilla version even though it errors out on installation.
...boy am I glad that worked!