I tried to flash my ROM with this ROM, all is ok, till setup screen and date/time is completed, then i cannot use my stylus, all tap at screen is no action, however keybroad still ok!
Strange I don't have such problem with this rom, try to reflash it
after reboot, this rom is ok
Related
Is there a way to format the PDA and reinstall a ROM. My PH20B1 is started to freeze after a ROM is installed and at Complete on the Setup for minutes. I end up just soft-resting cause after mins past its not doing anything....Is there a way to fix that???
Isn't it supposed to be like that? You're supposed to reset after the ROM upgrade shows 100% complete.
I think I understand the problem you have from the limited information supplied.
You have rebooted to a white screen after a failed rom upgrade, correct?
If so, just disconnect your device from the PC, hold power+record buttons, then prod the reset hole with your stylus. You will see "Serial v2.xx" where "xx" can vary. Now attach the phone to your PC (device now shows "USB" instead of "serial").
Next, kill off all activesync processes on the PC (ctrl-alt-del to enter task manager, then end task on "rapimgr.exe", "wcescomm.exe", "wcesmgr.exe").
Now that the device is attached and activesync is killed, start the ROM upgrader application to update the phone ROM.
After successful upgrade, it often helps to reboot the PC as well as the phone, as activesync does not always recover well from having its processes killed.
Im saying that My PDA is starting to freeze. Even after running, its starting to freeze up and I have to soft reset it. I am able to install a ROM on it however at the end of installing the ROM where the screens says COMPLETE...Tap to continue ro begin using your device...and its starts the ROM....As soon as I tap the screen in the middle of starting WM5 it freezes... Ive even downgrade to Wm2oo3SE and it still freezes. But after soft resest there was a message about "system data is corrupted, System will erase all data to fix this error! Yes or No to fix"....Can that be fix or am I able to re-format the PDA hdd and reinstall WM2oo3SE or WM5?
Hi again,
This is a guess, so treat it as such, but I suspect that something in your extended ROM could be causing the problem. On first boot after reflash, a file "autorun.exe" is executed from the extended ROM, and this will normally install a bunch of CAB files.
If something in your extended ROM was corrupt or otherwise not correct, it could cause a lockup on first boot - immediately after calibrating the screen, setting the timezone etc, just as you describe.
The safest thing to do is to revert to the device's complete set of original ROMs, as found in this table :-
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
The original ROM-set will restore the main ROM, extended ROM and radio ROM to the defaults.
If the problem is fixed afterwards, and you still feel brave enough to upgrade to WM5, then first repartition your device so that the extended ROM is empty. Instructions on how to do this from within WM2003 are found here :-
http://forum.xda-developers.com/viewtopic.php?t=50628
Figured Out A Solution
I figured out the problem and Im not sure if others have experienced this problem or not. Even if you dont created an extended rom on your Blue Angel when changing from rom to rom, if your screen tends to freezes after saying "tap on your screen to begin using your device" you will have to run the DOC repartitioning tool in the Prepartion Folder of some ROMS. Once running the program as the directions tells you and preform a reset even a hard reset on your device, everything will run fine without freezing.
Hello everybody,
I have a bad problem with my diamond, yesterday I tried to update my Gen.Y 5.3 ROM with Memo 2.5.1.0 ROM.
After flashing, my diamond will restart, as always, but the first time it makes an error with trying install something like "windowslive.update".
After this error my device was blocked.
I had remove the battery and restart it, nothing to do, it remaing blocked into first black screen so you see the ROM version.
So I have make hard and soft reset but nothing.
So I have launched bootloader with volDown+Reset and reflash Diamond with Gen.Y 5.5, now my device starts (not always) but after a little second it blocked again.
I need to remove the battery, but always the ROM reinstall himself with reset of contacts,SMS and recalibrate e reinstall all programs...
anybody have any idea what can I do?
okay i had just installed a new rom on my phone it was working fine until i had turned off the phone for awhile then turned it on it was loading then it got stuck on the startup page i took out the battery put back in it got stuck on the samething again please help!!!
slausell said:
okay i had just installed a new rom on my phone it was working fine until i had turned off the phone for awhile then turned it on it was loading then it got stuck on the startup page i took out the battery put back in it got stuck on the samething again please help!!!
Click to expand...
Click to collapse
If nothing else works, you may have to try a hard-reset: With the phone off, hold down the Talk/Send and End buttons then (while still holding down those other buttons) press the power button. This wipes out all the data on your phone and gives a fresh try at the new rom.
If you really want to start from scratch with a freshly-clean rom-memory, use the Task 29 -- recommended for weird problems.
Is this a custom rom -- which one? Have you posted this problem on that rom's thread?
Start the phone in bootloader mode. Then flash task 29. Then boot into bootloader again and flash another rom
alright it worked thank you so much
i haven't posted the problem the rom was a valkyrie v6 titanium
Next time you should ask this questions in the valkyrie thread. Because this has nothing to do with rom development.
Hello there, nice people of these forums
Yesterday my phone randomly wouldn't boot anymore. I was on an ICS ROM I had just flashed the day before, so it wasn't that much of an issue though. I just thought I'd reflash a stock ROM via Odin and that all would be well again.
Here's what happened:
- I flashed with the PDA, Phone and CSC boxes checked (and yes, I've got the right files in the right places).
- I flashed with a .pit file I've used countless times before
- I flashed with the repartition box checked (also tried it a few times without, actually).
So after this, my phone reboots, and goes straight into ClockworkMod Recovery. When I try to install a zip from the SD card (another ROM) OR choose the "reboot system now", option, it doesn't matter which I choose, it just goes off (or boots into a black screen, I can't tell).
When I then try to manually reboot the phone by holding the power button, it doesn't do anything (I've reinserted the battery lots of times). Also, my 3-button-combo for the recovery menu isn't working. The only thing that's working is my download mode.
Would you please help me with this problem? Thanks!
EDIT: While I have no idea how I did it, I seem to have fixed my phone. It now boots again and everything works flawlessly. Thanks for your time anyway
I was using JB 4.1.1 previously and decided to flash to a new 4.1.2 rom this morning. Everything was fine until the Samsung animation screen. There is no display. My screen is completely dark. But the phone responds when I touch the screen and the home button as well as the power button.
I thought this is the LCD problem but when I boot to Recovery, the display turns on and everything is fine. So I decided to flash to another rom but the same problem occurs. Did I brick my phone? Any solution guys? Some help would be very much appreciated.
IlDivinCodino said:
I was using JB 4.1.1 previously and decided to flash to a new 4.1.2 rom this morning. Everything was fine until the Samsung animation screen. There is no display. My screen is completely dark. But the phone responds when I touch the screen and the home button as well as the power button.
I thought this is the LCD problem but when I boot to Recovery, the display turns on and everything is fine. So I decided to flash to another rom but the same problem occurs. Did I brick my phone? Any solution guys? Some help would be very much appreciated.
Click to expand...
Click to collapse
Try to do checksum on the ROM zip file you flashed, if it was correct.. then try to do a fresh new flash of the ROM:
1- Make sure you're on a safe kernel .. if not, please flash a safe kernel (I prefer Abyss GB Kernel)
2- flash the file in the attachments
3- flash your ROM file
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. i think im stuck in recovery screen, but no way to be sure , hence i cant get usb debug.Please help.