My fone isnt connecting via USB to activesync :S my HD fd up n had to reinstall windows n now when i plug my phone in activesync gives an error that it cannot connect. When i run the troubleshooter it gives the following output:
Unable to establish a connection between the PC and the device. Get up-to-date solutions to common connection problems. Please click the following link:
http://go.microsoft.com/fwlink/?LinkId=65257
that link is of no use. The tray has a network connection icon which shows it isnt able to get an ip address. ive been searching on google for hours and read countless forums. but no solution found . The device was connecting and syncing perfectly fine before i formatted and reinstalled windows. Anyone having any idea? :S
ok solved just worked by chance... i went to device manager, uninstalled the device, n restarted... n now its working \o/ i think the above post cant be deleted so i wrote the solution here so it might benifit others.
i am having trouble with activesync my computer can see my mobile device which is a BlackJackl II but activesync can't see it and i did the ports and firewall, uninstalled reinstall activesync whats the deal
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
ActiveSync
Moved message
Needs a little bump here
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Sounds like something has changed on your PC, perhaps via a Windows Update. Have you checked to see if your firewall is the culprit?
You may also want to do a clean uninstall and then reinstall Activeswync 4.5 and create a new partnership with your device.
You can also try restoring your PC back to a date that you were able to use Activesync....
This happens to me rather frequently (I am looking for an ActiveSync replacement because of it).
However, I fix it by either soft reset of the device, PC, or sometimes both. If that doesn't work, you need to delete the partnership with the PC and reconnect.
RK
...any solutions yet?
I just got my kaiser 3 weeks ago after using a wizard for almost 2 years. what a great phone the wizard was... I kinda miss using it! Anyhow, i just experienced the sudden activesync failure. I now get random activesync openings on my kaiser with the message "To synchronize your device with a desktop computer... yada yada".
I have already setup a bogus server and set the scheduling to manual.
I have compared the wizard registry to the kaiser registry by searching every instance of 'activesync' and couldnt find anything.
I also deleted all instances of activesync in the notification queue and had memmaid rebuild it.
The device will connect to activesync but pops an error message that it could not synchronize and goes into a guest account setting. So for now I am having to use pimbackup to backup my data on the kaiser, bluetooth it to my wizard, then sync the wizard with my laptop to get the data into outlook. I am considering a hard reset but kind of want to wait until the at&t 6.1 official Rom comes out. I am also considering Chapura Pocketmirror Professional which worked well on an old Ipaq i had (wm2k3) that had sync issues. I also want to get this resolved so i can practice loading a new rom on the wizard. So....
Anyone have a fix yet? I hope so!!!
Oh, and for reference (to answer questions from other threads), my kaiser battery drains 4 to 5 times faster than the wizard in side by side use, and the kaiser definitely does not have a transflective screen while the wizard does... bummer. but the kaiser is tremednously faster!
1. Disconnect the device from your computer.
2. Try going to your device and select:
start->settings->connections->USB to PC.
3. Uncheck "enable advanced network functionality"
4. Reconnect the device.
Active Sync....
Hi,
You can try "PocketMirrorĀ® Professional 2.2.4 for Windows Mobile", its a pretty good syncronization tool, but it costs a few bucks...
I've been using the trial version of PocketMirror and must say its pretty good with my TYTN 2.
Regs,
The Reaper.
... my thoughts exactly
yeah, i tried the usb to pc option as well. even downloaded a cab from another thread that allowed me to choose rndis or usb mode. neither worked. I will probably use pocketmirror pro as well...
Hi, I just flashed a new ROM on my Orbit that works brilliantly, no issues at all, apart from the fact that the computer now doesn't see the device at all. Not even the blo-blong sound when you connect any USB device. The only thing I get connecting the cable is charging the battery. And if I start Active Sync on my Orbit I get the same message as mystic_nacho:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC"
I just tried an hard reset to try to fix the issue - no success..
Before flashing everything was fine..
Btw, my wife Diamond doesn't connect either, and it never did it: something related to the TouchFlo thing?
Any idea?
The ROM I flashed is
gullums TouchFlo2D beta 4
update
I found the Diamond 'Getting started disc' and installed the Windows Mobile resources tool...
The disc I have from the Orbit box is for Windows Mobile 5, I guess it's not worth to find it out and try...
Nothing changed, anyway.
update 2
Yesterday night out of the blue - while the Orbit was still connected to the pc - ActiveSync started to work... F. knows....
i had the same problem - sync was working fine and then stopped. what worked for me was to go to USB to PC under settings and uncheck "enable faster data syncronization".
hi,
i also had sync. problems in the past.
searched for months.. since i figured out that some registry entries on my PC where missing!
imported the mayor setting from my brothers PC and TADAAAAAA. problem solved.
search my threads and maybe you 've luck with my soloution!
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Have you recently used a memory cleaning Application like memmaid, Clear Temp, or SKTools? You might have cleaned out some important notification files, like repllog,exe that is used for activesync.
I had the same thing happen to me when I first used these cleaners. I had to do a hard reset on the phone to make it work again found out about the remedies listed below after the reset.
I have heard others were successful repairing these notification Queue's with MemMaid. You can hold your stylus on the repllog,exe notification, and a popup up will appear, asking you to Recreate ActiveSync, or rebuild notification Queue. I don't know if this feature is available in Clear Temp, or SK tools.
I've also heard of restoring activesync by unchecking all of the folders, syncing, and then adding each folder back to the list, one by one, until all is restored.
I too have just developed the same problem.
I have 2 TYTN II' one will sync fine the other wont.
It all went horribly wrong after I tried to install Wisbar and an Ipod theme, after I uninstalled it, cos it didn't work I found I could no longer sync with USB to PC and the sync option is greyed out on my phone. The phone will charge with some of my usb cables, but now even seems fussy about which cable will charge and some now won't.
I am given to wondering whether the usb connection on my Phone is the problem...everything else seems to be working fine.
I have even installed different ROMS via the memory card still the problem persists.
I would love someone to come up with a fix
**UPDATE**
Well I now have got it working, in my case I was right, the usb connection on the phone was to blame. I took it to a mobile repair shop, I told the guy that I thought it was faulty he took one look at it and said that I had a bent pin, he got a little tool out and teased it back into position, sure enough when I got home it worked fine so now I am able to sync again. Not sure how long it will last though.
**Update 2**
Failed again, at least I know what's wrong now.
I have recently re-installed windows on my laptop and installed a few new roms on my Kaiser, and now when I try to sync up to my computer, it says "Synchronizing" on the pc activesync window, but just sits there spinning its little green icon, while the phone says that it is connected to a pc, but no data transfer/sync-ing is in progress. I have lost all my contacts as it seems to be removing them from my phone or corrupting them in transit to the pc, so I've had to start from scratch. Is this a known issue?
Cheers in advance,
Chris
I'm having something like that. I can Sync all the itens except Contacts. I can't change settings for Contacts too. What is happening?
Try to delete your AS partnership on the PC, then remove your USB connexion and if it is still there, also remove the AS partnership on your device. Soft reset and connect. A new partnership will be created, hopefully solving the problem.
ActiveSync 4.5 wont sync with my Alpine; error message 'cannot verify the version of ActiveSync on your device. A program such as firewall may be blocking a port ActiveSync uses to connect to the device, or you may need to upgrade to a more recent version of ActiveSync on the PC.'
I hard reset the Alpine several times yet the issue.
Thanks
Recently I'm unable to sync my Vario III with my Vista x64 or Windows XP Pro desktop PC's. I don't sync often - last time was in March which worked fine.
At first I thought the problem was with WMDC on my Vista PC. I uninstalled WMDC re-installed, but it's made no difference.
The symptoms i'm getting are that when I start WMDC with the phone connected sing USB, I get the splash screen, then it sticks and goes no further. WMDC will start only if the phone is not connected.
If I plug it into the XP Pro PC, Activesync 4.5 starts, the animated ball spins in Activesync, but doesn't complete.
I think the problem is with the phone rather than either WMDC or Activesync, as I can start Pocket Controller on Vista and see the phone, and I can connect to the phone using Co-Pilot Central to download speed camera updates.
The last thing I did was to the phone was install Google apps like Youtube mobile and Search. Can these interfere with Activesync and WMDC? I've removed them but it still won't connect.
I've tried changing the USB connection type from advanced to normal, but that didn't fix it.
I get the usual windows sounds upon connection and disconnection, but WMDC doesn't work.
One clue here. If I set a password to protect the phone, upon connection, the phone locks and the PC says to unlock the phone. I type the password on the phone to unlock it, but the PC sits there with the same message to unlock the phone. So WMDC sees the phone up to a point.
I've also removed the partnerships from both the phone and the PC's, but neither WMDC or Activesync detect the phone as a new device. Activesync on the phone shows no errors.
I've tried everything I can think of and am still convinced it's a phone problem. I've searched for similar problems on XDA but haven't found anything similar.
Sorry for the long post!
Any ideas?
Thanks
Mike
Tried another cable?
ChumleyEX said:
Tried another cable?
Click to expand...
Click to collapse
Yes. Made no difference. Didn't see how it could really - since apps like Pocket Controller and CoPilot Central can see the phone.
I've had many activesync/WMDC problems over the years but never one quite like this. It wouldn't be so bad if it gave an error message or something, but it doesn't. There's nothing related in the event log either.
Baffled!
mtcs said:
..... There's nothing related in the event log either.
Baffled!
Click to expand...
Click to collapse
Woops. How did I miss it. There is something in the event log.
'Windows Mobile-based device failed to connect due to communication (0x80072745) failure (see data for failure code).'
I tried looking up the code using the Event Log Online Help but it has '...no additional information at this time'.
Oh well. At least I've got something to Google.
I figured it out. It was the device - the MDA Vario III.
My girlfriends phone - Palm Treo Pro - connects ok to the Vista PC on her account. WMDC worked fine with it. I plugged in my Vario III whilst still logged into her account, and WMDC wouldn't work.
I tried it on my account one more time, still wouldn't work. Reset the phone to factory defaults, re-configured it, connected it to the Vista PC, and WMDC worked fine.
I have no idea why it wouldn't work right before. In all other respects the phone was fine.