I have recently re-installed windows on my laptop and installed a few new roms on my Kaiser, and now when I try to sync up to my computer, it says "Synchronizing" on the pc activesync window, but just sits there spinning its little green icon, while the phone says that it is connected to a pc, but no data transfer/sync-ing is in progress. I have lost all my contacts as it seems to be removing them from my phone or corrupting them in transit to the pc, so I've had to start from scratch. Is this a known issue?
Cheers in advance,
Chris
I'm having something like that. I can Sync all the itens except Contacts. I can't change settings for Contacts too. What is happening?
Try to delete your AS partnership on the PC, then remove your USB connexion and if it is still there, also remove the AS partnership on your device. Soft reset and connect. A new partnership will be created, hopefully solving the problem.
Related
After a hard reset on the TyTn my computer is no longer detecting it when I connect the phone to USB cable. The computer makes a sound when I connect it, but Windows Mobile Device Centrer say that TyTn II is not connected, and it does not show up in My Computer eather.
I've tryed to delete the partnership and reconnect the phone, but nothing happens.
Can anyone help me please! Now I cant install any of my programs og transfer files between the computer and the pocket pc/phone.
Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box
Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box
I uninstalled Windows Mobile Device Centrer and then tryed the tip you described here. At first it looked ok, my computer detected the device and installed the drivers and reinstalled Windows Mobile Device Centrer.
But my device is still not showing up in Windows Mobile Device Centrer or My Computer
Check your personal firewall settings and open the ports MS asks you to at the Windows Mobile home/support page...
Go into task manager & see if Activesync is running. I have the same problem with my tilt & if I kill activesync then reattach it takes a moment the first time, but then it works.
Make sure you are running the latest version of WMDC. I absolutely could not get WMDC to work with my HTC Wizard for months. After MS came out with an updated version of WMDC (around June, I think) it started working fine.
If you absolutely can't get it to work, consider using emoze for over the air syncing of cal, contacts, mail, etc. (or an on-line exchange account.) I had to do that for a few months until I got it to work. Emoze has the advantage of being free. Unfortunately, neither will allow file syncronization, tho.
There is no activesync running.
And everything was working just fine before my device went "mental" and I had to hard reset. So before the hard reset I could use WMDC on this computer, transfer files and run active sync. But now I cant.
I also got an online exchange account so I can sync calender and contacts. But I want to be albe to transfer files to my computer and install new software.
My WMDC version is: 6.1.6965
Some more info about the computer may help. For instance, I take it from your usage fo Windows Mobile Device Center that you are running Vista. In any case, since the problem is with the computer and not the Kaiser, I would see if the manufacturer would provide some support.
Yes, im running Vista and I buildt the PC my self.
But Im not sure its realy the PC that is the problem, because I made the changes (Hard Reset) to the device and thats what caused the problem.
Anyway, I was hoping for some way to debug/troubleshoot this problem.
I am having the same problem. I sync to any one of 8 computers at work and one at home. Work runs XP PRO and Home VISTA Ultimate x64 all worked fine untill this week. I have not made any changes since the last sync, the computers know it's hooked up due to activesync opening and trying to connect when I plug in via USB. But it never connects. I want to flash to Dutty's newest ROM but can't connect. I sync all contacts and e-mail wirelessly but need the computer to flash (I do not have a sd card yet) Any idead would be great! I have tried the ideas listed above but no joy. I have not hard reset the device as of yet ( I need some things off of it first)
Steve
BUMP
I really need help with this!!! I'm pulling my hair out!
Did any of you that had this problem find a solution? I have the exact same issue except a hard reset will fix it for a while, and then the problem will reoccur a few months later. No software has been added during the time frame. Very annoying.
i've got just the same problem! plaese help us!
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
lipanz said:
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
Click to expand...
Click to collapse
omg!
try activesync for XP. It came with the phone or you can download it from.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
ActiveSync
Moved message
Needs a little bump here
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Sounds like something has changed on your PC, perhaps via a Windows Update. Have you checked to see if your firewall is the culprit?
You may also want to do a clean uninstall and then reinstall Activeswync 4.5 and create a new partnership with your device.
You can also try restoring your PC back to a date that you were able to use Activesync....
This happens to me rather frequently (I am looking for an ActiveSync replacement because of it).
However, I fix it by either soft reset of the device, PC, or sometimes both. If that doesn't work, you need to delete the partnership with the PC and reconnect.
RK
...any solutions yet?
I just got my kaiser 3 weeks ago after using a wizard for almost 2 years. what a great phone the wizard was... I kinda miss using it! Anyhow, i just experienced the sudden activesync failure. I now get random activesync openings on my kaiser with the message "To synchronize your device with a desktop computer... yada yada".
I have already setup a bogus server and set the scheduling to manual.
I have compared the wizard registry to the kaiser registry by searching every instance of 'activesync' and couldnt find anything.
I also deleted all instances of activesync in the notification queue and had memmaid rebuild it.
The device will connect to activesync but pops an error message that it could not synchronize and goes into a guest account setting. So for now I am having to use pimbackup to backup my data on the kaiser, bluetooth it to my wizard, then sync the wizard with my laptop to get the data into outlook. I am considering a hard reset but kind of want to wait until the at&t 6.1 official Rom comes out. I am also considering Chapura Pocketmirror Professional which worked well on an old Ipaq i had (wm2k3) that had sync issues. I also want to get this resolved so i can practice loading a new rom on the wizard. So....
Anyone have a fix yet? I hope so!!!
Oh, and for reference (to answer questions from other threads), my kaiser battery drains 4 to 5 times faster than the wizard in side by side use, and the kaiser definitely does not have a transflective screen while the wizard does... bummer. but the kaiser is tremednously faster!
1. Disconnect the device from your computer.
2. Try going to your device and select:
start->settings->connections->USB to PC.
3. Uncheck "enable advanced network functionality"
4. Reconnect the device.
Active Sync....
Hi,
You can try "PocketMirror® Professional 2.2.4 for Windows Mobile", its a pretty good syncronization tool, but it costs a few bucks...
I've been using the trial version of PocketMirror and must say its pretty good with my TYTN 2.
Regs,
The Reaper.
... my thoughts exactly
yeah, i tried the usb to pc option as well. even downloaded a cab from another thread that allowed me to choose rndis or usb mode. neither worked. I will probably use pocketmirror pro as well...
Hi, I just flashed a new ROM on my Orbit that works brilliantly, no issues at all, apart from the fact that the computer now doesn't see the device at all. Not even the blo-blong sound when you connect any USB device. The only thing I get connecting the cable is charging the battery. And if I start Active Sync on my Orbit I get the same message as mystic_nacho:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC"
I just tried an hard reset to try to fix the issue - no success..
Before flashing everything was fine..
Btw, my wife Diamond doesn't connect either, and it never did it: something related to the TouchFlo thing?
Any idea?
The ROM I flashed is
gullums TouchFlo2D beta 4
update
I found the Diamond 'Getting started disc' and installed the Windows Mobile resources tool...
The disc I have from the Orbit box is for Windows Mobile 5, I guess it's not worth to find it out and try...
Nothing changed, anyway.
update 2
Yesterday night out of the blue - while the Orbit was still connected to the pc - ActiveSync started to work... F. knows....
i had the same problem - sync was working fine and then stopped. what worked for me was to go to USB to PC under settings and uncheck "enable faster data syncronization".
hi,
i also had sync. problems in the past.
searched for months.. since i figured out that some registry entries on my PC where missing!
imported the mayor setting from my brothers PC and TADAAAAAA. problem solved.
search my threads and maybe you 've luck with my soloution!
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Have you recently used a memory cleaning Application like memmaid, Clear Temp, or SKTools? You might have cleaned out some important notification files, like repllog,exe that is used for activesync.
I had the same thing happen to me when I first used these cleaners. I had to do a hard reset on the phone to make it work again found out about the remedies listed below after the reset.
I have heard others were successful repairing these notification Queue's with MemMaid. You can hold your stylus on the repllog,exe notification, and a popup up will appear, asking you to Recreate ActiveSync, or rebuild notification Queue. I don't know if this feature is available in Clear Temp, or SK tools.
I've also heard of restoring activesync by unchecking all of the folders, syncing, and then adding each folder back to the list, one by one, until all is restored.
I too have just developed the same problem.
I have 2 TYTN II' one will sync fine the other wont.
It all went horribly wrong after I tried to install Wisbar and an Ipod theme, after I uninstalled it, cos it didn't work I found I could no longer sync with USB to PC and the sync option is greyed out on my phone. The phone will charge with some of my usb cables, but now even seems fussy about which cable will charge and some now won't.
I am given to wondering whether the usb connection on my Phone is the problem...everything else seems to be working fine.
I have even installed different ROMS via the memory card still the problem persists.
I would love someone to come up with a fix
**UPDATE**
Well I now have got it working, in my case I was right, the usb connection on the phone was to blame. I took it to a mobile repair shop, I told the guy that I thought it was faulty he took one look at it and said that I had a bent pin, he got a little tool out and teased it back into position, sure enough when I got home it worked fine so now I am able to sync again. Not sure how long it will last though.
**Update 2**
Failed again, at least I know what's wrong now.
Title explains everything. It keeps going through sync process automatically. Very annoying. Caused me to lose all my contacts on my phone and Outlook. Had to start all over again. Fix?
disable syncing contacts and outlook
.... So everytime I want to sync. I have to go through checking the boxes again.
gqstatus0685 said:
.... So everytime I want to sync. I have to go through checking the boxes again.
Click to expand...
Click to collapse
Or you can repeat your previous mentioned frustration. Whichever you prefer is fine with me.
ok.. well I don't think that'll help me.
This is what happened:
It kept syncing, I deleted partnership on activesync, deleted associations in the phone by deleting windows PC. Connected it again, went through the setup wizard and only clicked on contacts. Finished syncing.
Delete every contacts off my Outlook 2007 and on my phone. I had like half of them saved on my SIM. At that my SIM card is maxxed out with numbers.
gqstatus0685 said:
Title explains everything. It keeps going through sync process automatically. Very annoying. Caused me to lose all my contacts on my phone and Outlook. Had to start all over again. Fix?
Click to expand...
Click to collapse
Do you mean that ActiveSync is consistently sync'ing?
ActiveSync will always sync about every five minutes. It's hard coded to do this... annoyingly enough.
I use one computer to sync but sometimes i want to use my work computer to connect so i can transfer files to it. i could never stop it from trying to sync my contacts even if i had all options unchecked first. It doesn't even say it's syncing but it would still mess up my phone and delete all my contacts, etc. i just go back to the original computer and resync and everything is normal again.
Try ActiveSync Toggle
ActiveSync Toggle, installed onto your desktop PC, should allow you to manually disconnect ActiveSync connection between your Tilt and desktop PC. You can still leave your Tilt cradled so it can continue to charge the battery. When you want to again allow your Tilt and PC to sync you just tell ActiveSync Toggle to allow the sync.
I created a quick launch icon in the lower left toolbar area of my desktop PC (XP). The quick launch icon I created for the ActiveSync Toggle makes it really easy to just click on it to open/launch the ActiveSync Toggle application.
Here is the link to ActiveSync Toggle: http://www.micrologics.co.uk/library/ast/
Hope this helps.
Enable guestonly mode. You'll still connect to activesync, but you'll never be prompted to create a partnership. Your Tilt will continue to charge, you can still access your files, etc...
Here's the link for guestonly: http://www.pocketpcfaq.com/applications/undocumentedactivesync.htm
PM
I recently got a new PC with Vista Ultimat. Synchronizing the phone has been a nitemare.
If i hook the phone up, the computer beeps in recognition; I can even browse files on the phone sometimes. But ActiveSynch says I'm disconnected, the phone says I'm connected.
I find the only way I can get the synch to happen is to install MS Mobile Device Center 6.1 . I have the phone hooked up during the install, and during the install the phone is recognized and it will synch.
Any ideas on improving this. I"m surprised I didn't find this and a solution already out here (maybe using wrong search terms.).
Thanks
Try the info in here.
http://forum.xda-developers.com/showthread.php?t=359513
Thansk for pointing that out, but it didn't help.
And, interestingly, even reinstalling WMDC doesn't always work either.
What rom are you using? I had problems synching when I flashed Garmin dk2 rom. But all others work fine.
Try this, it worked for me.
Go to start<<settings<<connections tab. Then select the USB to PC icon. Uncheck enable advanced network functionality. Restart PPC and then try to re-sync.
First, mobile device center quit working on my new HP touch desktop. I have deleted everything and started over. I've had issues since the Vista on that machine is 64bit rather than 32.
I can connect via USB and view my files on my Diamond, I simply can't get Outlook (trial version) to connect.
It was working but now it decided to die and no matter what I do (including an hour on the phone with HTC tech) can I get it to work.
NOW, my 32bit Vista on my laptop gives me the following message:
"Synchronization could not be completed because one or more objects were in use. Please close all programs on your device and this PC and try again."
There's nothing (application-wise) running other than activesync. I've deleted partnerships and started over. and I still get this same message.
Can anyone PLEASE tell me what the F*CK is going on??? I absolutely freakin' hate activesync and windows mobile device center bull****.
Frustrated,
Mark
I just did a hard reset and I get the same error message. So I'm assuming that the problem is with my laptop, not my Diamond.
Anyone have any suggestions?
Thanks,
Mark
Hi
I had a similar problem where my Diamond would Sync fine at home but for the life of me I couldn't get it to Sync with my work machine, one day it just stopped working.
All the troubleshooting guides I found suggested to make sure that under..
Start, settings, connections, USB to PC
The 'Enable advanced network functionality' was checked, mine already was.
So I unticked it and tried a Sync and lo & behold it synced. I then re-enabled the check box and it was still Syncing.
This was after many deletions & recreations of the partnership, and even uninstalled the Mobile Device Center, all the while it would connect and I could browse the device, just no syncing.
Hope you get it fixed.
Cheers
Dude, I think that fixed it!!!
I clicked it and tried it several times to no avail....
I did a soft reset and it seemed to work.
Thanks,
Mark