Related
By mistake installed WWE_QTEK_Sonofon_11100_165_10400_Ship
on QTEK2020i during the installation the pocket crashed
and what do i have to do now to bring it back Please Help
May Be u reccomend utilites for repairing my qtek ?
download at here:-
this with O2 stuff
ftp://xda:[email protected]_XDA_IIi_Upgrade_v1.11.162_Radio_1.04.rar
this without O2 stuff
ftp://xda:[email protected]_Ext-1.11.162_Radio-1.04_O2stuffstripped.rar
checkout here for information about it....
http://forum.xda-developers.com/viewtopic.php?t=31630&start=50&postdays=0&postorder=asc&highlight=
please read about it if you want to know the different between the O2 stuff....
thanks
busy
my qtek is busy....
ERROR 101 : Connection Error
And red emergency lamp is on ! on qtek
before that during switching on showed the picture saying "Loading ..."
and busyyyyy.......
I had the same problem
I have Qtek 2020i and I had like your problem before and while installing the same ROM from sonofon, but be happy, it is not a big deal, I just removed the battery until it erased everything left at the device (backup battery was completly empty) then I replaced the battery and reconnected the device to sync while power cable is plugged in and I tried to reinstall the same ROm and it is working find and perfect with me, I like the sonofon rom, it is really nice!!!
if you had further trouble dont hesitate to ask !
I hope that you solve your problem soon.
Hi, I have a working sonofon ROM for my Qtek 2020i. If you haven't sorted your issue out yet I'd be happy to send it you on CD. It works even on a previously failed installation.
Hi, I have a working sonofon ROM for my Qtek 2020i. If you haven't sorted your issue out yet I'd be happy to send it you on CD. It works even on a previously failed installation.
I am assuming that Arrival has sorted the problem out by now but for future reference of others there is a simple way out.
Press and hold the following 3 buttons at the same time for about 3 seconds: Power, Action (D-Pad) and reset.
This puts the device into bootloader mode which is basically like DOS for the Alpine.
If that doesn't work, remove the battery until the backup battery runs out, place it back and put the device into bootlader mode as described above. The device can then be upgraded by connecting to the computer and running the update program.
Less crashing problems are likely if the device is connected to the mains at the same time.
Hey everyone ..
i was using my Blueangel normaly and so happy with it until i faced this problem before 2 days ..
I was texting my gf while i was out and kept on even though the battry gave me a warrny that its really low .. i ignored and kept SMS's her until it went off.
i went home charged my device but its not connecting to the network. it shows either "No Service" (where it shows X beside the signal tower) or "Searching" (where it shows ! beside the signal tower).
Please anyone knows how to turn it on im really in a bad situation here.
Note: just to let you know im using WM5 Hemi's rom and upgraded it today to Xplode's rom just hoping it would help.
Well when i tried another sim on my blueangel it worked and my sim card on another mobile it worked also. im really losing my brain
44 views no one have a slight idea..
anyways thanks alot everyone for visiting
Hi,
All I can suggest is to re-install radio rom! prob 1.15.
If not that then ensure flight mode is NOT active, and battery's fully charged
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
It seems wierd that another sim worked on your BA, must be a faulty/damaged sim.
I also note you've tried the non-working sim on another phone and that works! Wierd that too!
Hope that helps,
Sunny
Have you tried to manually select the network in the "Phone" settings screen? I've heard of similiar problems being fixed by that.
well after i asked here and there and got disappointed with I-Mate people.. they know nothing at all
an IT in my company told me the problem is with my sim card. its damaged cause of the change in the battry power (as he says) it damaged the frequency that my mobile use to read the sim so there for it would work on any mobile except mine.
so i would change the sim but it needs me ages to get free and do that.
THANKS ALOT TO EVERYONE ATLEAST READ MY THREAD OR TRIED TO HELP
YOU GUYS HERE ARE THE BEST
By the way
sunny: the Radio is already 1.15 from ages. but thanks alot for trying to help me.
Fraser: I tried to manualy select the network but it says there is no network which is funny cause there is 4 networks in my area.. actuly im working with the same operator so im inside the tower LOL. the signal streth is the best here.
Thanks alot mates
No problem!
Thats what we're here for!
Regards
Same problem
I once had the same problem. Now I'm no genius when it comes to these phones and it actually took me a whole week to get an idea of what the hell happened to my phone. Basically, these phones are Quad Band (GSM 850/900/1800/1900) and for some reason after I upgraded I lost my signal. I found a little application that let me reselect my band (its not built into windows for some reason) and that solved my problem. I just selected "Auto select" and the problem was solved after a soft reset.
Now, I can not remember what that application was but maybe that can give you an idea of what to search for.
No Service issue
sunnyd24 said:
Hi,
.......
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
...........
Hope that helps,
Sunny
Click to expand...
Click to collapse
Hi, is there more 'democratic' way to resolve this issue than reseting BA twice?
After installation of xplode's R4 for noobs an old version of R 1.06 was left on BA. Thinking that this was a reason for No Service of the phone I dumped latest R , but double f..reseting necessity still persists ...
Is that a normal thing to reset twice such an advanced device when you want even just to call smbdy? Thanks
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
xplode said:
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
Click to expand...
Click to collapse
Hi hi there! First of all please accept my deepest appreciation for such a great work you have done to make us - PPC ordinary users - little bit more happy Just one small note - is it possible to upgrade your downlodable R4 file with all necessary ROMs - Radio, etc., etc. With the intention that every Noob trying to upgrade his/her BA, should do it in a push of one button - not searching for separate latest ROMs and HowTo instructions? Thanks for your time!
P.s. Sorry it seems came out little bit off topic....
well it is possible but i have no time to do it. or you can try to copy the radio nbf file into the folder of the nk.nbf and run the upgrade utility
Any solution on this matter ? I am using Helmi MW6 ROM with radio 1.15.00 and i'm having the same problem.
I've searched the forum but found no solution yet.
JP
i recently bought a dopod 838. i used it for 2 months. it went smooth but now i have problems.
1. It would take me 4 minutes after Startup is finish( Sometimes i got stuck on the startup)
2. My computer cannot detect my device via USB for upgrade and activesync purpose even on bootloader mode. i cant reflash it.
3. My unit has a strange High Pitch System Music. like pop-up menus.. etc
4. Bluetooth cannot turn on
5. GSM feature is missing..(when i inserted my sim card NO SERVICE will appear on the status)
I did nothing,nothing at all nor crashed from a ROM upgrade. Im using IPL/STL 2.21. Hope you could help.
__________________
help pls?...
Ok, I posted a thread on the main wizard forum and I'm trying again here since this is a little more on topic in this forum.
Here goes with all the technical specifics I can add in.
I recently got an HTC 8125 (I've had one before and never had this problem)
I immediately CID and SIM unlocked the phone using lokiwiz's unlocking program.
I inserted my tmobile sim into the cingular 8125 and all was great.
I upgraded the ROM to the TNT 19199 batch of WM6.1 Everything is still great.
The phone worked awesome, the next day I downloaded the T-Mobile UK radio version 2.19.11.
I flashed it to the phone and everything seemed fine, the program finished and the phone restarted.
Upon restart I was greeted with a no service message and the phone behaves as though it is shutoff. No big deal, right? WRONG...
I went to the tmobile and cingular site and got the default roms from each just in case.
I then connected the phone to the usb and activesync would not recognize the phone, or do anything for that matter.
I used an external USB bluetooth dongle to try and connect the phone to the PC to flash the default rom and fix the radio problem, this wouldn't work either.
I then put the phone into bootloader mode, this works ok, I see the USB in the corner and figure I'm saved. Nope.
I ALWAYS get an Error Connecting from the rom software. Even though my PC recognizes the phone, active sync does not. I re-installed Activesync and rebooted my computer numerous times. To no avail.
The ONLY rom software I which has worked is the TNT 19199 but it doesn't fix the lack of radio.
Here are some other points of interest. On phone bootup I get this:
IPL 1.08
SPL 1.08
<----Notice, NOTHING in the GSM spot.
OS 1.11.1.0.1 (or whatever the numbers are for that particular rom)
The USB will recognize the phone ONLY in bootloader mode, otherwise when the phone is on the Today screen I get no recognition.
The TNT rom has worked twice when I tried it, (by worked I mean it allowed me to re-flash the same rom) Of course the TNT rom doesn't work all the time, it has given me several connection errors.
No other rom has worked as of yet, all others give me a connection error.
The battery meter will not display, nor will it tell me what type of battery or how much charge is left.
The phone will sometimes go to amber light when plugged into the wall charger but NEVER with the usb to PC cable.
I can still navigate around the windows mobile 6.1 interface though it moves incredibly SLOW. i.e. I pushed the comm manager button to make sure the phone didn't simply get shutoff and I waited about a minute and a half or longer for it to bring up the comm manager.
I need some severely good advice and some new tricks to try, I'm running out of ideas, I saw several threads under the HTC TyTn threads about similar problems and something about the IPL/SPL being important but I'm not sure what they're talking about. I have searched this forum and I have found people talking about similar problems, all the responses point to, "If you can get to the bootloader you're fine." This is incorrect.
So seriously, help me out here.
HOW DO I FIX MY STINKIN' PHONE.
I would suggest rolling back to your working configuraton by reflashing using a memory card instead of the USB.
fixed.
Actually I finally figured it out.
It seemed the reason that those roms worked sometimes but not others was this: To get the phone to recognize you had to do things in a VERY specific sequence.
You had to let the phone boot all the way into WM6 and then plug in the usb cable. Then put it into bootloader with the camera / soft reset button method. Then you waited for the nice USB connect sound, and began the ROM flash RUU program. (In this case it was the T-Mobile default rom).
Once that was done the phone acts as normal and everything is good.
Doing anything out of order or putting the phone into bootloader without it having first booted all the way to the OS would give you the connect error.
Please clarify if you're running WM6 with IPL/SPL 1.xx? I believe that's not possible to get good results that way.
IPL 1.08
SPL 1.08
<----Notice, NOTHING in the GSM spot.
OS 1.11.1.0.1 (or whatever the numbers are for that particular rom)
TNT 19199 batch of WM6.1
Wm6.1 on ipl/spl 1.xx,strange ,how do you explain this,how did you manage to get wm6 installed with ipl/spl 1.xx,cuz it only works on ipl/spl 2.xx and higher. Are you sure its TNT 19199 series wm6.1 Rom ?
I have an cooked ROM since over three months and there where
never any problems with it, but the fast emptiness of the batt, but I have an allways full charged replacement batt and two dockingstations with extra batt loader.
But my device is getting hot the last two days... but not the batt, I think its the CPU inside.
I first uninstalled everthing unnecessery, then made a soft reset and now a hard reset, without installing anything new, but again its getting hot.
What could be the Problem?
Attached the screenshots of the device and ROM Informations.
The Rom I use allways worked fine, till before two days it began to heat the device.
I like my Touch Diamond, I got used to it, it would be a pity buying a nother one, also because I dont have the money for.
Please if you have any suggesttions, help me.
Yours cincerly,
Robert
Try changing your radio.
Good Luck!
Could it be your GPS and/or WiFi is on, and the Diamond is constantly looking for a signal/connection?
Radio / Wifi / BT
Hi,
tanhks for reply!
Everthing off (Wifi / Bluetooth).
Only Phone is on and it conects to 3G when starting Browser.
But also with "EVERTGING" OFF" it heats the device.
Could you please post me how to change radio and to which one,
or a link to a thread ehre this is explaned?
Thank you,
Robert
http://forum.xda-developers.com/showthread.php?t=416211
Radio
Hi,
thnaks for the link!
I installed the new radio with the "geting hot" fix...
Now looking what hapens.
I turned on to charge over USB when connected,
but it seems to discharge in case of beeing connectedto USB..
Funny what???
What could this be?
Yours
Robert
Does not solve the heat problem
I did install the new radio as suggessted,
made a hard reset also,
but device is also getting hot.
Any iDeas what else i could be?
Yours Robert
Which is the part that's heating too much ( Eg. Lower back !! )
Which oart heats...
Backwards down under the battery, where the IM Card is insertet.
Seems to be a defect. On charging the dvice discharges... It seems to to like this.
Yours,
Robert
Addition:
If no SIM is insertet and no USB Cable is connected it doens not heat
Strange:
Usually heating is because of the following reasons -
1. Your GPS/Wifi is on
2. You're running Android
3. You're running too many applications
Check all this first.
If negative then it will be something with the radio.
Keep trying different radios ( although be careful not to flash a 2G radio onto a 3G one )
If this too fails , its something with the chip.
FYI , heating is kinda normal for all the diamonds , mine does heat sometimes but i dont take it as a big issue.
Try different radios . if that doesnt work then its a chip problem. My diamond too heats like crazy but im used to it now.
TRY TRY TRY
siddharthsai said:
Usually heating is because of the following reasons -
1. Your GPS/Wifi is on
2. You're running Android
3. You're running too many applications
Check all this first.
If negative then it will be something with the radio.
Keep trying different radios ( although be careful not to flash a 2G radio onto a 3G one )
If this too fails , its something with the chip.
FYI , heating is kinda normal for all the diamonds , mine does heat sometimes but i dont take it as a big issue.
Click to expand...
Click to collapse
Not runnig android nor Wifi nor Bluetooth
Removed SimCard to use in a nother Handy to be able to talk to people without shutting down the Smartphone.
The other user which I phone to cannot understand me anymore, seems like the mic is going dead.
Applications is only the HTC Sense running, nothing else....
3G works, I set it to only go to 3G when requested by for eyample a browser.
But also without sim and without USB connection it heats....
The ROM is the original one from XDA....
I tried to download the Orange ROM from HTC Homepage but it does not accept my serialnumber of the Touch Diamond, I tried a million times.
Its courious....
I will sell it and get a Toshiba T01 with 1GHz and WM6.5 I am used to,
Do you have any better suggesstions for an smartphone with 3G (HSDPA), WLAN, Bluetooth, 640x800 resolution and WM 6.x?? I need it to connect to internet with the Intenet connection shing wizard on the HTC Diamond...
Bought my mummy a netbook with integrated SIM-Card Adapter and my old Internet SIM (512 MB free thzen slows down speed). I have now Orange wikth 1 GB free and paying for more, but I dont need it so very much that I come over 300 MB monthly....
Youts,
Robert
I will try some other radios.
What have I to do after a new Radio flash, a complete hardreset?
Whiuch german WM6.5 with HTC Sense can you recommend me, without very much programs. I need Google Maps, opera, ICS and long battery life, thats all..
Yours and thank you,
Robert