i recently bought a dopod 838. i used it for 2 months. it went smooth but now i have problems.
1. It would take me 4 minutes after Startup is finish( Sometimes i got stuck on the startup)
2. My computer cannot detect my device via USB for upgrade and activesync purpose even on bootloader mode. i cant reflash it.
3. My unit has a strange High Pitch System Music. like pop-up menus.. etc
4. Bluetooth cannot turn on
5. GSM feature is missing..(when i inserted my sim card NO SERVICE will appear on the status)
I did nothing,nothing at all nor crashed from a ROM upgrade. Im using IPL/STL 2.21. Hope you could help.
__________________
help pls?...
Related
By mistake installed WWE_QTEK_Sonofon_11100_165_10400_Ship
on QTEK2020i during the installation the pocket crashed
and what do i have to do now to bring it back Please Help
May Be u reccomend utilites for repairing my qtek ?
download at here:-
this with O2 stuff
ftp://xda:[email protected]_XDA_IIi_Upgrade_v1.11.162_Radio_1.04.rar
this without O2 stuff
ftp://xda:[email protected]_Ext-1.11.162_Radio-1.04_O2stuffstripped.rar
checkout here for information about it....
http://forum.xda-developers.com/viewtopic.php?t=31630&start=50&postdays=0&postorder=asc&highlight=
please read about it if you want to know the different between the O2 stuff....
thanks
busy
my qtek is busy....
ERROR 101 : Connection Error
And red emergency lamp is on ! on qtek
before that during switching on showed the picture saying "Loading ..."
and busyyyyy.......
I had the same problem
I have Qtek 2020i and I had like your problem before and while installing the same ROM from sonofon, but be happy, it is not a big deal, I just removed the battery until it erased everything left at the device (backup battery was completly empty) then I replaced the battery and reconnected the device to sync while power cable is plugged in and I tried to reinstall the same ROm and it is working find and perfect with me, I like the sonofon rom, it is really nice!!!
if you had further trouble dont hesitate to ask !
I hope that you solve your problem soon.
Hi, I have a working sonofon ROM for my Qtek 2020i. If you haven't sorted your issue out yet I'd be happy to send it you on CD. It works even on a previously failed installation.
Hi, I have a working sonofon ROM for my Qtek 2020i. If you haven't sorted your issue out yet I'd be happy to send it you on CD. It works even on a previously failed installation.
I am assuming that Arrival has sorted the problem out by now but for future reference of others there is a simple way out.
Press and hold the following 3 buttons at the same time for about 3 seconds: Power, Action (D-Pad) and reset.
This puts the device into bootloader mode which is basically like DOS for the Alpine.
If that doesn't work, remove the battery until the backup battery runs out, place it back and put the device into bootlader mode as described above. The device can then be upgraded by connecting to the computer and running the update program.
Less crashing problems are likely if the device is connected to the mains at the same time.
I made an upgrade to the radio of my t mobile MDA , I used the Cingular 2.5 ROM and after i restarted the device , my pocket pc turned too slow, it did want it to connect to my pc as it used to, the phone signal wasn't working
and now that tha battery is dead, my pocket pc won't start
can anyone tell me how to fix this problem???
Please i need help
Go back to the thread where you got the radio only rom. You will find posts about the phones not charging. READ THEM...
You should always have a full charge on your battery before any flash operation.
Ok, I posted a thread on the main wizard forum and I'm trying again here since this is a little more on topic in this forum.
Here goes with all the technical specifics I can add in.
I recently got an HTC 8125 (I've had one before and never had this problem)
I immediately CID and SIM unlocked the phone using lokiwiz's unlocking program.
I inserted my tmobile sim into the cingular 8125 and all was great.
I upgraded the ROM to the TNT 19199 batch of WM6.1 Everything is still great.
The phone worked awesome, the next day I downloaded the T-Mobile UK radio version 2.19.11.
I flashed it to the phone and everything seemed fine, the program finished and the phone restarted.
Upon restart I was greeted with a no service message and the phone behaves as though it is shutoff. No big deal, right? WRONG...
I went to the tmobile and cingular site and got the default roms from each just in case.
I then connected the phone to the usb and activesync would not recognize the phone, or do anything for that matter.
I used an external USB bluetooth dongle to try and connect the phone to the PC to flash the default rom and fix the radio problem, this wouldn't work either.
I then put the phone into bootloader mode, this works ok, I see the USB in the corner and figure I'm saved. Nope.
I ALWAYS get an Error Connecting from the rom software. Even though my PC recognizes the phone, active sync does not. I re-installed Activesync and rebooted my computer numerous times. To no avail.
The ONLY rom software I which has worked is the TNT 19199 but it doesn't fix the lack of radio.
Here are some other points of interest. On phone bootup I get this:
IPL 1.08
SPL 1.08
<----Notice, NOTHING in the GSM spot.
OS 1.11.1.0.1 (or whatever the numbers are for that particular rom)
The USB will recognize the phone ONLY in bootloader mode, otherwise when the phone is on the Today screen I get no recognition.
The TNT rom has worked twice when I tried it, (by worked I mean it allowed me to re-flash the same rom) Of course the TNT rom doesn't work all the time, it has given me several connection errors.
No other rom has worked as of yet, all others give me a connection error.
The battery meter will not display, nor will it tell me what type of battery or how much charge is left.
The phone will sometimes go to amber light when plugged into the wall charger but NEVER with the usb to PC cable.
I can still navigate around the windows mobile 6.1 interface though it moves incredibly SLOW. i.e. I pushed the comm manager button to make sure the phone didn't simply get shutoff and I waited about a minute and a half or longer for it to bring up the comm manager.
I need some severely good advice and some new tricks to try, I'm running out of ideas, I saw several threads under the HTC TyTn threads about similar problems and something about the IPL/SPL being important but I'm not sure what they're talking about. I have searched this forum and I have found people talking about similar problems, all the responses point to, "If you can get to the bootloader you're fine." This is incorrect.
So seriously, help me out here.
HOW DO I FIX MY STINKIN' PHONE.
I would suggest rolling back to your working configuraton by reflashing using a memory card instead of the USB.
fixed.
Actually I finally figured it out.
It seemed the reason that those roms worked sometimes but not others was this: To get the phone to recognize you had to do things in a VERY specific sequence.
You had to let the phone boot all the way into WM6 and then plug in the usb cable. Then put it into bootloader with the camera / soft reset button method. Then you waited for the nice USB connect sound, and began the ROM flash RUU program. (In this case it was the T-Mobile default rom).
Once that was done the phone acts as normal and everything is good.
Doing anything out of order or putting the phone into bootloader without it having first booted all the way to the OS would give you the connect error.
Please clarify if you're running WM6 with IPL/SPL 1.xx? I believe that's not possible to get good results that way.
IPL 1.08
SPL 1.08
<----Notice, NOTHING in the GSM spot.
OS 1.11.1.0.1 (or whatever the numbers are for that particular rom)
TNT 19199 batch of WM6.1
Wm6.1 on ipl/spl 1.xx,strange ,how do you explain this,how did you manage to get wm6 installed with ipl/spl 1.xx,cuz it only works on ipl/spl 2.xx and higher. Are you sure its TNT 19199 series wm6.1 Rom ?
Ok, I'm a new HTC Trinity owner (its the Orange SPV M700 variant to be exact), i've had an SPV M500 for many years now and decided it was time for an upgrade.
I would love to get WM6 on there and there is an enormous amount of support all over the place for just that purpose but i've run into a problem at the first hurdle.
I found the WM6 Upgrade guide on trinityguides.info and as the first thing on the list was Hard-SPL, and that Hard-SPL would stop me from bricking my nice shiney new trinity i thought that was a pretty good thing to try out.
I plug the USB in, active sync sees it, i run the 'ROMUpdateUtility.exe' file and check the boxes, get to the screen where it connects with the phone, click next, the phone pops up 'EnterBootLoader is trying to run, allow?' i hit yes and it goes to the bootloader..
Trouble is, when it goes out of WM5 and into the bootloader it disconnects from activesync and so the ROM update utility just fails, says its lost connection with the device..
Am i missing something here?
Turns out i fixed it, aren't i just the little genious..
For anyone else who has this issue and stumbles over this thread:
Go to Settings > Connections > USB to PC and uncheck 'Enable advanced network functionality'
Last night i was playing with my gps ( Navigon - Google Maps - Google Nav) I switch the phone off at the comm Manager and left it off like that the whole night.
This morning when i switched it on, the phone refused to receive any signal.
Ive tried the following
Soft Reset
Hard Reset
Different Sims
Switching flight mode on and off aswell as the phone tabs
Ive changed the band from auto to gsm and back and still nothing
Gps, Wifi and everything else still works perfectly.
Before i return it and wait like 50 days for them to fix it, what can i try?
stevh0 said:
Last night i was playing with my gps ( Navigon - Google Maps - Google Nav) I switch the phone off at the comm Manager and left it off like that the whole night.
This morning when i switched it on, the phone refused to receive any signal.
Ive tried the following
Soft Reset
Hard Reset
Different Sims
Switching flight mode on and off aswell as the phone tabs
Ive changed the band from auto to gsm and back and still nothing
Gps, Wifi and everything else still works perfectly.
Before i return it and wait like 50 days for them to fix it, what can i try?
Click to expand...
Click to collapse
More information please. Rom, Radio, SPL?
Also have you tried calling your provider to ask if theres any problems at their end?
Mark.
I have no idea what rom..
lemme check..i have not changed a thing since i took delivery of the phone about 9 11 month ago.
my sim works perfectly in another phone.
rom 1.56.405.5
rom date 08.28.07
radio version 1.27.12.32
Does your sim work perfectly in another phone *in the same location* though? It was suggested you contact your network provider to see if they have any known issues or there are any reasons why your phone shouldn't be working. It may help if you have the IMEI number ready if you are in the UK, in case there is some reason why it has been blacklisted. If your TyTN II wont work with another sim in it (ideally from another network provider) and your usual network provider is unaware of any reason why this should be happening, then as a stock standard TyTN II, I think you'll have a good chance of having it looked at for free under warranty by HTC. Here in the UK I had my ROM reflashed from their WM 6.1 abomination back to the original WM 6.0 version by HTCs repair centre within one day so unless you choose a turtleback express postage option to send it in, there's no way it should take 50 days.
It started working all on its own again? how weird is that?
it had been normal ?
my tytnII had became the same after flight mode had turned on.
when fight mode off, it displayed "no service".
yiwangwuqian020 said:
my tytnII had became the same after flight mode had turned on.
when fight mode off, it displayed "no service".
Click to expand...
Click to collapse
you just use GSM-schen-HTC.Kaiser.CommManager.3G
hi, first thanks a lot,
my tytnII had this commManager software. I just used this commManager to turn on or off this flight mode .
how about no sim detected?
This problem is on my phone ,but this prog is not running perfectly. Error report at cca 95% full "sufficient system permissions"
Sorry for little English!
Please help me
radio:1.65.17.56
rom: through
Gastrocsaba said:
This problem is on my phone ,but this prog is not running perfectly. Error report at cca 95% full "sufficient system permissions"
Sorry for little English!
Please help me
radio:1.65.17.56
rom: through
Click to expand...
Click to collapse
after I reflash this tytn`s rom, it remain no service.
I think it had wrong with its gsm hardware.
Sorry for my english.
I found this problem too.( no service)
My solution is
1. I format rom by use MTTY tool.
(1. How to check and repair bad block
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Download Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.
2. Flash Rom again.
3. Now Signal come.
And you turned your Kaiser into a BRICK...
... If your SPL supports "task 2a".