Database Develop

Radio not working propery

Weird thing going on with my phone. No rom updates or major changes.
It was working one day then it just stopped after a reset. It seems like the OS does not know that the Radio is actualy working fine. It asks for the pin but then it does not go any further and still shows No Service & a question mark on the tool bar. I have called it an you know that the radio is connected as it wakes the phone from sleep mode.
Any ideas on how to sort this out?

You must turn of flight mode to see the level of wave on your network. if it still has no signal please hard reset your PPC. and check again for that problem

I had a problem similar to this after I mashed up the phone's registry. Basically, it'd prompt me for the PIN, but even though I'd enter it correctly, the phone could never get out of flight mode.
Ended up reflashing the firmware onto it, which was handy in the long run as it gave me a chance to stick Pug's cooked rom onto it (with the later radio version)... I think your problem is one of those which mandates a hard reset and/or reflash :/

you can also change the radio version for your PPC. the newest is 1.04

Indeed, that was the real reason for me using Pug's rom as opposed to a regular rom (because it has the 1.04 radio in it) - it's made an improvement. I can now get a signal in my house (!) whereas before, due to where I live (no signal towers for miles, and I live in a valley), I just couldn't get signal at all. Not very useful.

Major!! Wifi Will Not Turn On!!

I've tried it all!! The wifi will not turn on at all. In the settings tab and under connection, the comm manager wifi switch pressed will cause the wait cursor to come up, but after the process it wont turn to on. Can anyone please help me.

how do u know its not on? cant detect wifi?

Is the Wifi antenna icon comes up on the top menu ?

Baronic said:
how do u know its not on? cant detect wifi?
Click to expand...
Click to collapse
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.

Please somebody help us. My diamond's wi-fi doesn't work. I try a lot of tfink. I try a lot of time hard reset. And several times upgrade diffrent roms. Now i use 1.37.401 europa rom. But my diamond's wi-fi still not work.

same here.. any news?...

Juggy said:
same here.. any news?...
Click to expand...
Click to collapse
Did you set your battery for best performance in the wifi configuration? If not, try it and see if it works then

Yes.. the wifi is not working ,... the same for the gps...

Mines the same. Done a soft reset - nothing. Done a hard reset and all seems fine for the mo.
Got my phone from orange.

hard reset u mean erase all and start like new?
with this hard reset.. the same problem... any other option??

No Wify
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?

WLAN Hardware
minlu said:
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
Click to expand...
Click to collapse
I have the same problem with german htc touch diamond and several roms.
I think the hardware has an error. Bull**** !!!
Has anyone an other idea?

I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?

I couldn't enable Wifi properly on my last phone despite hard and soft resets. After trying lots of times, I gave up and sent the phone back to Orange. I currently have a Diamond Touch that has no problems enabling, but can't connect to my router using WPA2.

I think I have the solution for wifi / wlan problems on diamond
Over one week i try to start my wifi (100 hardresets, 5 new ROMs) and then i believe it is an hardware error.
Under ...\connection\wifi\ was not the tab "wireless", only the tab "networkcards"
My last try was the solution:
1. In my HTC Kaiser is the same wifi-hardware
2. I export the registrykey "HKEY_LOCAL_MACHINE\Comm\TNETW12511" from the kaiser to a .reg-file
3. I delete this registrykey on the diamond and import the .reg-file from the kaiser
4. Before I can start wifi i make about 5 softresets and try to start
5. But the start was only successful when I make first a connection to the pc with ActiveSync and then a softreset
This is my solution, please answer me when it works for you too
One problem is still there: after an usb connection wifi will not turn on. I must make a softreset but thats no problem for me.
Its the same what "huwwatkins" describe at #13 with the S710
Here is my regfile from kaiser

zmob123 said:
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Click to expand...
Click to collapse
I have heard of this... The wifi does not go on but the bluetooth does. I was told it was a bad chip.

same here, called retailer today. told me HTC is working on a fix. will be available in about two weeks. let ya know

Same problem here..
I have the same problem. Tried everything - no luck. Thinking of turning it in for repair - should I flash the original SPL/ROM for warranty reasons or can they tell it's been flashed anyway ?

wifi working fine on mine
i have no problems at all

huwwatkins said:
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
Click to expand...
Click to collapse
Yes my diamond has this also only when plugged with USB.
Grtzzz

HTC Diamond WiFi issue, help needed

Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.

The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.

omar302 said:
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
Click to expand...
Click to collapse
Thanks Omar, I was kinda thinking that it may be hardware issue, but I don't anymore, I am trying something else actually as we speak. The only thing I haven't tried before is another hard SPL and I think that's the problem, I installed another version hspl1.34 and it seems more stable now and wifi keep connection, also with another hspl version (it was hspl 1.24) RAM under devise info>hardware showed 128, now it is 192. I will test in intensively and post my results here in case nay one else have the same issue. Hopefully I will not have to send it away for repair. Thanks for your info anyways.

In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly

Kwasmir said:
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Click to expand...
Click to collapse
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.

With my phone, i tired all Hard SPL versions and even went back to stock SPL & Rom 1.37 & 1.93 and it still didn't fix the WIFI issue. it will work for 5-15 minutes then it will not work.
Anyway, I got a replacement phone as apparently they couldn't fix it.

pufeks said:
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
Click to expand...
Click to collapse
...I have the same problems with you
However, I think the problem may caused by different ROM versions.
My hTC version Diamond initially flashed a Chinese version ROM, and the WiFi connects well, while I changed to Dutty's most updated ROM, this problem comes and I cannot figure out why untill now.
Some friends also suggested to go to the Power Management and change WiFi to "Best Performance", I tried and failed again.
WiFi can open and connect to Routers located in library of my university, nevertheless it cannot open any pages.
I'm also waiting for any person that can solve the problem and then help us figure out why....
thanks in advance!

I got the same problem as most of the people have. and i think "Fail to turn on wifi" is a very common among guyz who got HTC TD.
I dont know what should be done, i almost tried every thing. actually my phone was locked to 3 mobile Sweden and i unlocked it but my wifi was'nt working before unlocking too but i did'nt gave attention to it. Now i noticed it.. is that any one know how to lock it again soo that i can send my mobile for repairs or, any one know what should i do.

I would recommend upgrading your radio and your rom.
Ive been rocking the setup in my sig for some weeks now and its been flawless, stable and fast.

which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot

Hi,
Im using AlphaZero V7 NLD,
Im have 1 wifi point in my house, downstairs.
even when im on the attic i have 80% signal strengt.
My router is a draytek 2820G router.
Wifi for me is very good. .. correctly, AZTOR V7 NLD is very good for me.
im on t-mobile network.
Radio Radio v1.00.25.05 , Radio v1.00.25.08, Radio v1.00.25.16, where all good,
now testing Radio v1.08.25.20, HDSPA signal is bit weaker atm.
my best radia atm i think, v1.00.25.08.
im betting, that the starter of this toppic, who has 5 access points in his house all have the same SSID. This is not the way.
Or make 1 big AP aera, bij connecting the AP's to each other.
of try to set every AP its own SSID, and its own Channel.
Louis

WIFI problem in HTC Diamond.........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....

pranavsethi said:
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
Click to expand...
Click to collapse
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?

Wifi & Bluetooth not detected by HTC Diamond
Someone pl help. My HTC Diamond is not detecting bluetooth devices neither is detecting wifi. It was earlier doing so and working fine however I believe after installing tweak TD & t3d config it has stopped working. I have installed new ROM also but to no avail. Can someone pl help!!!!!!!!

Wintermoonlight said:
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Click to expand...
Click to collapse
i also have the same problem. it detects a wifi (my router at home Aztech brand), then trying to connect to it, and then it always showed the wifi as "unavailable". i put my phone 2 mm distance from the antenna of my router it also won't connect. i have change dozens of roms, win 6.1, 6.5, 6.5.1, different cook, MTTY, all with no success.
i've looked for internet and google for answers, i seen quite a lot of forum has described this issue, but with no solution. most of the ppl suggest in various forums to pull the wireless slider to "Best Performance", ofcourse i have done that, but is just the same result.
i'm still trying searching for a solution for this, i hope is not a hardware issue because my warranty has already ended. i'm currently using Gen Y R4.1B rom

pufeks said:
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
Click to expand...
Click to collapse
Ok consider now wifi will work by re-flashing the spl.
But what is the relation between spl (os/winmo loader) with wifi?

another dang unsolved diamond wifi?
bravo.

same problem with wifi on diamond2
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.

which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot

wjenya said:
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
Click to expand...
Click to collapse
nope, i also put Gen.Y WM6.5 then the problem still arise.
i'll wait any solution until my diamond is totally wrecked

Diamond doesn't hook up with network service

Hi all,
I'm having problems with my HTC diamond, which I hope you don't mind me dumping here for advice.
From one minute to the other, my Diamond suddenly stopped connecting to my provider's network. That is, I cannot make phonecalls, send sms, etc. In the task-bar, there's now an antenna-icon with an exclamation mark. If I remove the SIM card and slide it into another phone, there's no such problems.
Here's what I've already tried to do -- without any results:
1.) call my provider, they said the SIM should be fine, it's registered as active (this makes sense, considering the SIM is working properly in another phone and other SIM cards do not work on the Diamond phone either.)
2.) switch network selection to 'manual'. This keeps giving an error message, saying that the device can't read the network settings ("try again later").
3.) soft reset (red button on the back)
4.) hard reset (volume button + enter button + red button)
5.) hard reset (volume button + enter button + red button) including NAND format.
6.) re-installing the 1.39 ROM (available at HTC.com)
7.) (out of sheer desparation) hard SPL (olinex)
8.) tried to downgrade to the 1.34 ROM (after hard SPL), but failed (froze)
Some possibly interesting information:
1.) I was running TomTom 7.0 navigation software, the back of the Diamond got quite warm (which I know is normal)
2.) The Diamond was hooked up to a universal 5V charger for a car.
3.) I can't get a GPS lock anymore (e.g. with Googlemaps, TomTom)
I'm quite sure that the problem lies within the device, not in the network settings.
Some left-over hypotheses:
1.) I blew up a chip using a universal 5V charger (perhaps it had too high a peak-voltage).
2.) A chip was destroyed by the heat of running TomTom for an hour straight.
But honestly, I don't know very much about this all. Hope you can help me.
Thanks in advance,
Sven

i think this is a "feature" of the Diamond
Mine will randomly loose signal for 30secs - 1 min, then pop back

Mine's failed to pop back for about four days now ;-)
I called HTC. After running through all the check-ups they decided it probably needed repair. They're picking it up today.

i have the exact same problems you listed, im on t mobile but my phone does not pick up any networks. i eventually found out that i needed to plug in my phone to my charger for it to detect a service but i was still getting many dropped calls. did you just call HTC to see if they could fix it? im starting to give up after trying almost everything that you listed, good luck fixing it as i am in the same boat as you

The same problem here...But, my diamond is already in the service... Will wait a few weeks and if you want I will let you know what was the problem. When it happened I was using duffy's rom, I think 2,9 version. Maybe...if you were with the same, might be something wrong there. But one thing is sure...when I get my phone back FOR SURE I will put the original ROM without messing around. I recomend you the same!
Good luck!

Sim Card Missing/No Service

Since a few months I have been experiencing some serious issues with my TyTN II.
After being on for a while, it displays either:
No Service - While the reception in the area is just fine. Switching 'Phone' off and on in the Comm Manager fixes this problem, but then after maybe half an hour the same thing happens
Sim Card Missing - Apparently it can't read the SIM, a soft-reset usually helps in this situation.
I have tried several ROMs and Radios, and I even had the SIM-reader in the phone replaced. The SIM-card itself works fine in several other phones.
Does anyone have any experience with this? Any other suggestions as to what I could do? Any help would be greatly appreciated! Thanks.

tjado said:
Since a few months I have been experiencing some serious issues with my TyTN II.
After being on for a while, it displays either:
No Service - While the reception in the area is just fine. Switching 'Phone' off and on in the Comm Manager fixes this problem, but then after maybe half an hour the same thing happens
Sim Card Missing - Apparently it can't read the SIM, a soft-reset usually helps in this situation.
I have tried several ROMs and Radios, and I even had the SIM-reader in the phone replaced. The SIM-card itself works fine in several other phones.
Does anyone have any experience with this? Any other suggestions as to what I could do? Any help would be greatly appreciated! Thanks.
Click to expand...
Click to collapse
Have you tried other sim card on your phone and see what happens? Have you checked the sim card slot and see if there is nothing that's interfering the phone signal?

this is the same thing that is happening to me and there is no obstruction or anything interfering with the sim card connecting to the phone eventually i gave up on looking for a fix. So now i reverted to using my opal So the TyTn II just became my pocket pc now im going to flash wm6.5 jijijijijijjijiji but if somebody finds a fix please post it cause the tytn II was awesome but now its dead.

Same problem here
I'm having the same problem here. Already changing the sim flex and sim card reader, but still no improvement. Is there anything that I can do for this problem?
does anybody ever changing the upper board? is there any result?

same thing hapened to me..
tried sim in another phone and it works, tried another sim in the kaiser and no sim detected??

almost the same problem with my 8925
I have WM6.1 on it. It some time has a good reception, but in several minutes it says The SIM card is missing. Then it (not always, but sometimes) finds SIM itself. strange thing is, that if I flash WM6.5, it has almost no problems but it looses sound and camera doesn't work either...
Any ideas?
Thanks beforehand!

Tried Sim Card Flex replaced.
tjado said:
Since a few months I have been experiencing some serious issues with my TyTN II.
After being on for a while, it displays either:
No Service - While the reception in the area is just fine. Switching 'Phone' off and on in the Comm Manager fixes this problem, but then after maybe half an hour the same thing happens
Sim Card Missing - Apparently it can't read the SIM, a soft-reset usually helps in this situation.
I have tried several ROMs and Radios, and I even had the SIM-reader in the phone replaced. The SIM-card itself works fine in several other phones.
Does anyone have any experience with this? Any other suggestions as to what I could do? Any help would be greatly appreciated! Thanks.
Click to expand...
Click to collapse
> I did exactly just all that, using a Windows Mobile 6.5 Rom.
> After replacing the Sim Card Flex but Sim card still unreadable.
> Currently using back my Wizard, was thinking of changing the Flex Ribbon Cable but skeptical it will work unless someone have tried it.
> Found it on Ebay, check it out.
> http://cgi.ebay.com.sg/ws/eBayISAPI.dll?ViewItem&item=280555578532&ssPageName=STRK:MEWAX:IT
> Hope this helps abit

Almost the same with my Kaiser. The only difference, it doesn't show "No Service" message, shows network icon and name, but not available for calling. From time to time becomes available, after few seconds no more! After several hours of such unstable working, drops network at all, with no chanse of restoring it unless switching phone off/on. After that, performing as before.
I have installed a numerous versions of Roms and Radios, ranging from WM6.0 to WM6.5, tried Android, tried almost every combination of band, frequency, hsdpa and data setting with no help.
Is it possible hardware failure?

I did notice a micro switch in the sim card slot when I was tearing down my unit.. perhaps you want to play with the switch to see if other position may solve your issue.

same issue here...
tried everything...

Dear All,
Have you tried to connect an GSM external antenna to check if it improves the reception ?
Regards,
Nino

Sorry for my english.
I found this problem too.( no service)
My solution is
1. I format rom by use MTTY tool.
(1. How to check and repair bad block
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Download Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.
2. Flash Rom again.
3. Now Signal come.

mtty fix
has anyone tried this? I'm having the same problem where my phone says no service and sim card missing, but i'm afraid to be the first to try this mtty fix as i've never used it before. Can someone confirm that it will fix this problem? Thanks to the guy that put it up ^

aekapolm said:
...My solution is....
Click to expand...
Click to collapse
master aekapolm...
i will try your solution!

aekapolm said:
...
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks...
Click to expand...
Click to collapse
after "info 8" my kaiser formatted... and i can not type "task 2a" ??????

i'm planning to change the flex cable cause mine has a cut in the middle and need to change the lcd due to crack

It's not the SIM card or the switch. That switch you're referring to will shut the phone off in the event that the SIM door is opened.
As for the "no service" issue, I understand that the HSPDA/3G radio part of the phone tends to go bad, especially with certain radio SPLs'. Once it's gone, it's gone for good. The only way to restore functionality is to replace the lower board which contains the radio, which includes the NAND (all your precious data).
I have seen some success with people using the 1.70 series of radio versions but it does not restore 3G/HSPDA, only 2G is functional, and the way networks are changing over to 4G, I don't see much of a future for 2G devices.
My advice... Find a replacement Kaiser with a cracked screen or other problem that doesn't involve the lower board and swap parts.

Out of curiosity, and asking for a mod to help on this:
This post is teaching newbies to KILL their phones, why was this thread revived?
Any newcomer please DON`T DO THE STEPS BELOW!! It will kill your phone.
aekapolm said:
Sorry for my english.
I found this problem too.( no service)
My solution is
1. I format rom by use MTTY tool.
(1. How to check and repair bad block
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Download Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.
2. Flash Rom again.
3. Now Signal come.
Click to expand...
Click to collapse