I have just upgrade to WM5 TuMa 1.3, all works fine but ActiveSync!
ActiveSync doesn't syncronize my ppc!
I put PDA in the cradle but ActiveSync doesn't active the connection. Also, after a few minutes the pda says "Unable to obtain a server-assigned Ip Address. Try again later or enter an IP address in Network settings"
what can I do?
:twisted:
Do you have a software firewall and are you using Activesync 4? AS4 is required by WM5 and the PDA is assigned an ip address before it can sync.
efjay said:
Do you have a software firewall and are you using Activesync 4? AS4 is required by WM5 and the PDA is assigned an ip address before it can sync.
Click to expand...
Click to collapse
I use zonealarm with these applications trusted for LAN and Interner:
ActiveSync Application (WCESMgr.exe)
ActiveSync Connection Manager (wcescomm.exe)
ActiveSync RAPI manager (rapimgr.exe)
I also try to shutdown the firewall but nothing change!
Closer said:
efjay said:
Do you have a software firewall and are you using Activesync 4? AS4 is required by WM5 and the PDA is assigned an ip address before it can sync.
Click to expand...
Click to collapse
I use zonealarm with these applications trusted for LAN and Interner:
ActiveSync Application (WCESMgr.exe)
ActiveSync Connection Manager (wcescomm.exe)
ActiveSync RAPI manager (rapimgr.exe)
I also try to shutdown the firewall but nothing change!
Click to expand...
Click to collapse
Have you also opened up all the required ports - see here http://www.microsoft.com/windowsmobile/help/activesync/zone.mspx
I solve the problem!
I have the Windows Service "DHCP Client" disable!
Thank you for support!
No problem, glad its now working.
Related
Hi,
I just upgraded my Treo 750 with the AT&T WM6 build today. Everything seems to be working fine, except that I cannot sync with my company's OWA server. Activesync says that it's synching, but this goes on for a long time, then it stops and the message "Waiting For Network" appears at the bottom of the screen.
Others on the same server can sync fine with their devices, so it's not a server issue. I can download my GMail just fine so it's not an issue with internet settings.
Any ideas, or anyone having the same problem? I haven't been able to find related posts.
Thanks
Kevin
This may be of some help...
http://discussion.treocentral.com/showthread.php?t=151190
Please disregard this thread. I got it working. Thanks!
Same with me.
I Just upgrade my 750v to WM6.
But, now I cannot sync the with my exchange server 2003 SP3. (In WM5, I always sync successfully)
I always got an error : The security certificate on the server is not valid. Contact your Exchange Server administrator or ISP to install a valid certificate on the server.
I even add the Secure DWord key (0) into HKCU/Software/Microsoft/ActiveSync/Partners registry. But error still shown every time I tried to sync.
Anyone can help me ?
I installed Dutty's newest 6.1 last night and cannot get Exchange to sync. I used the bundled connection setup tool to set for AT&T. When I start the sync, it comes to a screen that asks me for my Exchange password, but it won't accept it and keeps asking for it. I know I am using the correct password and I reset it just to make sure. I don't have this problem on my Treo when I set up Exchange sync. I tried changing the advanced connection settings from MEdia Net to My ISP and that hasn't worked either. Any ideas anyone?
ActiveSync Results:
Result: Access was denied. Choose Configure Server on the ActiveSync menu to check your server username and password.
Support code: 0x85010002
Halp? Please?
double check your exchange server settings, sometime or most the time you need ssl checked.Your domain correct as well.Also too u prob need the server cert installed to your device.
Google the support code
Hi all,
I'm having an issue when trying to synchronize two diamonds and a cruise (all of them running wm6.1 FRE) with an Exchange Server 2003 SP2. Each time I try to synchronise through GPRS/3G , i'm getting an error (n° 0x80072EE2, wich means server not available).
Below is my initial situation :
Synchronization is ok using USB on all device. ActiveSync 4.5 is configured to use server "mail.mydomain.com", refering to a different IP address depending on whether synchronization is initiated from outside or inside local network. From outside, a redirection from gandi.net transfers mail.mydomain.com to https://xxx.xxx.xxx.xxx/exchange, "xxx.xxx..." being my exchange server's public IP.
After spending days looking for a workaround, here's what I've tried :
- Disabling WM DNS cache (tried with both DnsCacheEnable and DnsCacheEnabled registry entries) and soft reseting the device, as suggested here : http://forum.soft32.com/pda/Wireless-Attempt-results-Error-0x80072EE2-ftopict76576.html ;
- Unchecking the "use proxy" box in my connection's advanced properties ;
- Placing the OWA redirection (https://xxx.xxx.xxx.xxx/exchange) on a new subdomain : webmail.mydomain.com, in order to have mail.mydomain.com pointing the same public IP address inside and outside the network.
Now I have :
mail.mydomain.com --> public_ip
webmail.mydomain.com --> https://public_ip/exchange
So, theorically, putting my public IP address or mail.mydomain.com inside ActiveSync server's configuration should be exactly the same (except for certificates). Here is my problem : When using directly my IP address, I can see the request going through the firewall, to port 443 of my exchange server (but getting a certificate error, since i'm supposed to be connecting using mail.mydomain.com). When using mail.mydomain.com, I still get the 0x80072EE2 error, and nothing goes through my firewall..........
Looks like there is no DNS lookup during wireless synchronization when using a domain name in activesync configuration...
Thanks for reading, any help would be great.
Hi,
My Provider gave me an offer to use gprs/3g unlimited browsing through opera but no outlook e-mail, using a specific proxy server which limits file downloading to 1MB, gives free web access but stops POP/IMAP traffic completely.
Is there any way to make outlook *automatically* use the standard gprs/3g settings and proxy server in order to receive/send e-mails (and of course pay for that traffic) and at the same time Opera *automatically* use the unlimited data settings (and of course not pay for that traffic)?
Activesync is all webdav over https - whether or not the proxy is configured to allow it through is another thing.
If you go into connections, and specify the proxy, activesync should try and use it (I tested on mine with an invalid proxy address, and activesync failed to work, so it should work in theory)
Furbious said:
Activesync is all webdav over https - whether or not the proxy is configured to allow it through is another thing.
If you go into connections, and specify the proxy, activesync should try and use it (I tested on mine with an invalid proxy address, and activesync failed to work, so it should work in theory)
Click to expand...
Click to collapse
Thanks, but I don't use activesync (if you mean sync with my PC).
I download mail through the air (3g or gprs). I don't have an internet connection at home (don't blame me for that, plz), and at work I am not allowed to install activesync...
Greetings. I've searched and find only assistance regarding setting up remote desktop on the PC. When I run RDP on the Kaiser I get the "cannot connect with current settings" error. I have network management for programs that connect to the internet set to use Media Net, and programs that connect to a private network to also use Media Net. I'm using a 6.5 cooked rom (PDA Corner) and the 6.5 RDP client software. The 6.0 RDP only hung at "connecting". I'm probably missing a check box somewhere. Thanks for any help.