Database Develop

PLEASE HELP!!! i need help upgrade to the New Radio 1.13.00

Please i need help to upgrade to the new radio rom. i have a siemens sx66 from cingular. i tried to upgrade it but i always get an error.

Hi aih1977,
Please read the wiki. Cheers ^^

Hi khngaroo
i did but i still get an error

Same issue here
Hi guys,
Actually, I have the same issue. As far as I could see, the Wiki doesn't address the "123: Radio file checksum error" that I receive when following the directions. I follow the directions for using the downloads which doesn't go, then I use the files from the Siemens SX66 Upgrade as suggested.
Any thoughts? Thanks.

ever thought about reading the other threads ?
http://forum.xda-developers.com/viewtopic.php?t=23814

Hum
Lets see the wiki 1.40 upgrade is in the first place a TPYE II upgrade.
Now if you spend sometime and READ the page you will see that there are 2 ways of doing a 1.40 upgrade. One is the whole rom in its type II format the other is just the CE and the radio Type I.
How ever if you don't read the page and think you are got it all worked out then you use the fast option, thats the MA_noID tool (Type II), then download the radio 1.13 which Is a type I but who cares about that any way....then you run the bugger and get a checksum error what the hell have I done now error.
Please correct me if I am wrong so that I can correct the wiki page.

MDAIIIUser,
Yes, I have thought about reading the other threads. What was not obvious to me was that I need to upgrade to the 1.40 ROM to be able to upgrade to the 1.13 Radio. Forgive me if I missed this.
Thanks for pointing this out. I'll start over and review all the 1.40 ROM threads.

lungbutter
You dont need to upgrade to CE 1.40 for the radio 1.13.
Just go to wiki and follow the radio upgrade page. It worked for me and many others.
Now if you want to upgrade to 1.40 then do that also on the wiki page, this will however give you the radio 1.12. (unless you read the whole of the page and understand the getting started section of wiki as in how to use fix.bat)

i tried everything can someone set up the files and link it so i can download it. i think im doing something wrong.

Can you click on the link in my signature?

Arg! Lost my post twice.
Anyhow, MDAIIIUser,
Ok. So the 1.40 ROM is not needed. That was my initial impression. I thought you were referring to reading the 1.40 ROM threads.
I also saw that many users were able to upgrade with no problems. That's why I was suprised when I received the checksum error after reading the 1.13 Radio threads and exactly following the Wiki several times before I gave up. I must have missed something because it seemed like the Wiki steps should've worked no problem.
I haven't found anyone posting that has upgraded the radio on a Siemens SX66 yet. I'm wondering if it's Siemens-related which is why I jumped on aih1977's thread (sorry ).
I'll start over and review the threads and directions, etc.
Thanks for your reponses.
lb

so you are saying that
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
does not work for you as you have a SX66.
This could be due to the fact that your device has no camera and the header of the rom is for a camera.
I have never read about having to fix the header for a radio upgrade, its a first for me but I can learn.
Please confirm
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.

The new Radio ROM does work on a SX66 if you folloe the directions. If you have an issue use the upgrade files that you used to upgrade 1.40. Your going to get an error the 1st go around but then it will run smoothly the 2nd try.

MDA,
I'm running 1.13.00 radio on my SX66...
-Chris

Dear MDAIIIUser,
Correct me if I am wrong. All this while, from what I've read through the forum, my understanding is that MA_NoID can only be used to upgrade type II ROMs. If so, I must confess that I've upgraded my radio to 1.13 (type I) with MA_NoID... And it worked... Any clue?
Cheers ^^

Ok i just want someone to help me with upgrading the radio and if someone out there upgraded the radio please link it or pm me with the files that you used to do it.
Thank you.

MDAIIIUser,
Okay, I was able to get the radio stack upgraded to 1.12. Here's what I did. I'm sure it's pretty ugly and probably not the easiest way but:
Followed the Wiki again with errors as follows:
After step 7, running BaUpgradeUt I received the "Error 100: Model ID Error".
After step 5 of the second set of instructions, I received: "Error 123: Radio Image File Checksum Error". No joy.
So I then took the iMate 1.40 ROM image and extracted the files, deleted the ms_.nbf and nb_.nbf and ran MaUpgradeUt_noID.exe. It errored with Error 120: Country ID Error. The phone was still in USB mode so I reran MaUpgradeUt_noID.exe again and it successfully updated the Radio to 1.12. I tested the phone calling my voicemal with no problems.
I then replaced version 1.12 with the 1.13 version. I ran BaUpgradeUt.exe and recieved the "Error 123: Radio Image File Checksum Error" (this is using the files from the 1.40 ROM with the 1.13 radio file). I then tried running MaUpgradeUt_noID.exe again. The device software update utility showed no information in the from or to sections of the dialog box. It doesn't throw the phone into USB mode and after a minute or so it offers congratulations thinking it upgraded the phone.
I then went back to the 1.13 Radio files I downloaded and ran MaUpgradeUt_noID.exe. I received the Error 100: Model ID Error".
I reran MaUpgradeUt_noID.exe and received an error that it coundn;t find the ruu.conf file so I renamed the htcruu.conf and htcruu.dll ruu.conf and ruu.dll. I reran it and it would attempt to update the radio, then timeout. I received a communications error (which I didn't record) then tried to soft reset the phone. It was stuck in USB or Serial mode. Cold boot no worky either.
I then reflashed back to 1.12 successfully. I will try to update to 1.13 later tonight or tomorrow.
Here is my phone info. before the update:
Siemens SX66 Cingular
Model No: PH20B1
ROM Date: 01/21/05
Radio Version: 1.02.10
Protocol Version: 1337.35
Ext. ROM Version: 1.33.110 WWE
Thanks for the responses. I'm sure that there's an easier way but I'm happy to be at least 1.12.
lb
Edited: Type on filenames.

God are we having fun.
And Boy am I lost.
This is what I can work out.
You flashed the i-mate rom 1.40 radio 1.12 got errors and re ran it it was fine. Thus you have a 1.40 with radio 1.12
Now you are stuck. you want to flash the radio 1.13 (Type I) using the wiki info and you get error that tells me that you have the wrong device. The file is for a device with a camera you dont have that.
You try the MA_tool which wont work as its for type 2 and gives you a checksum and your stuffed again.
You seem to be the first person that has come up agaisnt this thus we need to upddate wiki with new info.
I have a problem with this as the 1.12 was a type II to Type I convert that I made, nobody had a problem with that before.
So as I asked you to confirm what you have and you have not done that I will ask again.
Please confirm
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.

OK i did everything i just want the files that someone used to successful upgraded there siemens sx66 from cingular to the new radio 1.13 rom. so i can upgrade my siemens sx66.
SO PLLEASE CAN SOMEONE HELP!!!

MDAIIIUser said:
So as I asked you to confirm what you have and you have not done that I will ask again.
Please confirm
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.
Click to expand...
Click to collapse
MDAIIIUser,
Sorry for the confusing post. I wanted to provide some detail. Answers are as follows:
1) Yes.
2) ..."Followed the Wiki again with errors as follows:
After step 7, running BaUpgradeUt I received the "Error 100: Model ID Error". After step 5 of the second set of instructions, I received: "Error 123: Radio Image File Checksum Error".
3) Siemens SX66 Cingular
Model No: PH20B1
ROM version: 1.33.10 WWE
ROM date: 01/21/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version: 1.33.110 WWE
I believe that I don't actually have the 1.40 ROM. From the directory in whcih I decompressed the iMate 1.40 ROM (PDA2k_WWE_14000_176_11200.exe) I removed the ms_nbf and nb_.nbf files and left the radio_.nbf file, which I believe will only flash the radio, then updated.
Is that less confusing?
Thanks,
lb
aih1977,
We are actually trying to determine what the issue may be to update your radio on the SX66. Hang in there!

Downgrade from Mr Clean rom

Can someone help me to downgrade from this rom.
I would like to put back my original one.
I already tried and I didn't managed. I have a Qtek 9100 so normaly it is unlocked.
When I tried to downgrade a got a message 296 saying that the rom is not usuable for my device.
Can someone give me the correct procedure to downgrade..

Downgrade to Button's 1.05 available Here !
Then you can "upgrade" it back to the shipped version.
Good luck!

thanks a lot.
It's worked

WOW! Quick like the bunny!

Same problem
Hi,
I have the same wish (re-install the original rom).
Like you indicate, I've downgrade... but now I can't upgrade to the original rom (i try with this one and this one)...)
Have you any idea ?
Thank a lot.
Loïc.

Resolved
Thank to Chris...
He help me in PM and I've resolved my problem...
Loïc.

link not working
Dr Puttingham said:
Downgrade to Button's 1.05 available Here !
Then you can "upgrade" it back to the shipped version.
Good luck!
Click to expand...
Click to collapse
Het the link is not working!!!!

Try this ... ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe

trying to upgrade to the new t-mobile (2.26.10.2) rom
can anyone help me, i currently have mr clean installed but i cannot update to the new t-mobile rom?
what do i need to do?

Still looking for button 1.05
That link doesnt work either. I have looked all over this site for this button 1.05 and I always get this Error 550 Failed to change directory message...
Its 6 in the morning for me now in paris. I give up for now. But I have crashed my spv 3000 trying to downgrade it with a link somebody gave at some point on this site. I think I can just put back the 2.17 IPL and SPl Roms I have. But its a real bother. Anyone can help, so I can do this CID unlock., and then and only then pgrade my rom...

Paul Bourbon said:
That link doesnt work either. I have looked all over this site for this button 1.05 and I always get this Error 550 Failed to change directory message...
Its 6 in the morning for me now in paris. I give up for now. But I have crashed my spv 3000 trying to downgrade it with a link somebody gave at some point on this site. I think I can just put back the 2.17 IPL and SPl Roms I have. But its a real bother. Anyone can help, so I can do this CID unlock., and then and only then pgrade my rom...
Click to expand...
Click to collapse
That file you were given is good. ROM files are no longer posted here per M$'s request.
Typically when the install "hangs" it due to a problem with the PC, spyware would be my first guess. Also it's amazing what deleting your Windows temp files and running a CHKDSK /F can do. Try with another PC.
btw, there's a couple of good tutorials that deal with unlocking G3 devices ..
Good luck.

Error 300 while installing Molski

I currently have AKU3.2-1.0RC1.
What do I have to do to install RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2?
Also, Molski mentioned I need an Extended ROM - how do I install that?
Thanks guys.
Tried RomUpgradeUtility_noID .....there was an Error 240 =(

Error 300:
Error message will appear when you use the incorrect RUU version to upgrade.
Error 240:
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.

_Nomad_ said:
Error 300:
Error message will appear when you use the incorrect RUU version to upgrade.
Error 240:
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
Click to expand...
Click to collapse
O i got that. that's from the Readme file.....
But what does that mean?....like.can you suggest the next step? =)

Well... I'd suggest that you use this ROM to downgrade with. You should be aware that this ROM also downgrades the ipl/spl so make sure that after flashing it upgrade to an official ROM that also upgrades your bootloader.
NOTE: You have to make sure that your device is CID-unlocked before flashing a custom ROM. If you don't know how, look here...
After these steps you shouldn't have a problem upgrading to the latest molski.biz ROM.
Oh, and the extended_rom is, in the case of molskis rom, already included in the download. As it is in almost every ROM available, so you really don't have to worry about that...
Good luck and give us a shout if you run in to any problems not answered in the above mentioned thread

_Nomad_ said:
Well... I'd suggest that you use this ROM to downgrade with. You should be aware that this ROM also downgrades the ipl/spl so make sure that after flashing it upgrade to an official ROM that also upgrades your bootloader.
NOTE: You have to make sure that your device is CID-unlocked before flashing a custom ROM. If you don't know how, look here...
After these steps you shouldn't have a problem upgrading to the latest molski.biz ROM.
Oh, and the extended_rom is, in the case of molskis rom, already included in the download. As it is in almost every ROM available, so you really don't have to worry about that...
Good luck and give us a shout if you run in to any problems not answered in the above mentioned thread
Click to expand...
Click to collapse
I had my CID unlocked using lokiwiz. Very happy - first time everything just went as described in the thread....!
However I wasn't able to use __RUU_Wizard_1050412_WWE_101_11210_WWE.exe - It gives me an Error 300 again. (My Wizard is newly hard-resetted so I guess I don't mind hard-resetting it again if needed)

Downgrade from AKU3.5 to Original ROM...HELP PLEASE!!

Hi.
I'm having some serious problems running WM5 on my SPV M2000 (Blue Angel). Internet Explorer keeps crashing, doesn't browse...bluetooth isn't recieving files from my PC, camera closes on its own, MSN Mobile not working at ALL...etc.
I want to remove this AKU3.5 ROM and return back to my previous WM2003SE ROM from Orange or even Imate. I downloaded the Orange V2.5 ROM update but failed to initialize the update process since the Country ID was incorrect for some odd reason.
Guys can you please help me out of it. Just tell me the safest and easiest way to downgrade back to the original ROM. And is possible that when i downgrade, i can install the Imate PDA2k ROM on my Orange SPV M2000?
I'd really really appreciate your help. Looking forward to your replies!
My device information details are:
ROM version : 5.04.09.WWE
ROM date : 11/02/06
Radio Version : 1.13.00
Protocol Version : 1337.42
ExtROM version : *empty* (blank)

i would make use of wm5 maupgrade_noID utility to flash the .nbf file of wm3 back to the original rom.

imatrix said:
i would make use of wm5 maupgrade_noID utility to flash the .nbf file of wm3 back to the original rom.
Click to expand...
Click to collapse
Yeah hi. Thanks for the reply, could you please give me a step by step procedure how am i suppose to do it? Where do i get the files from and how do i go about it.
I'd be grateful man!

As i see you use helmi aku 3.5 rom.
when u extracted the file out of the zip file u initially downloaded, u should see a folder name PH20B1. It includes maupgrade_noid utility there.
so basically what u do is extract the original rom (nk.nbf) into that PH20B1 folder, then put your device to bootloader mode, flash it as normal.

imatrix said:
As i see you use helmi aku 3.5 rom.
when u extracted the file out of the zip file u initially downloaded, u should see a folder name PH20B1. It includes maupgrade_noid utility there.
so basically what u do is extract the original rom (nk.nbf) into that PH20B1 folder, then put your device to bootloader mode, flash it as normal.
Click to expand...
Click to collapse
Actually i didn't install Helmi AKU3.5 ROM. I bought my phone used, and had this rom already installed. Now i want to get back to my original factory ROM. And i can't seem to get how to do it

http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
link above lists all the original rom for each device / operator.
please see the attachment, it's the utility to upgrade.
for further information please read wiki though.

Thank you imatrix. Will go through the link you provided. Thanks for all your help!
By the way...is it possible for me to flash an Imate ROM on an Orange SPV M2000? I find Imate ROMs more stable than Orange.

ooo?/
I think, you will have a serious problem wwhen you go back to wm2003 mate.. you're bluetooth will be useless, I don't know why and how,,.. I tried wm2003 downgrade last time, and I was worried because when I try to turn my bt on, it keeps may saying that the bluetooth software is expired..bla..bla..and I can't turn my bluetooth on.. though I haven't tried installing abt stack, but I guess same thing will happen.. but its for you to find out.. theres a very comprehensive details on downgrading/upgrading roms on blueangel wiki.. to get rid of that country I'd error, just use maupgradeutnoid.exe which you can also download from there

Flashing WM6.5

Hii guys. I have read and read and read the threads on flashing but still couldnt find an answer to my problem. I am trying to flah wm6.5 on my wing. When i start herald-uspl from the flash center, the problem occurs after step 2. It says that when you hit enter for step two, it will load a patched bootloader, but it never loads it. Can anyody tell me wht im doing wrong or the solution to thix, i will greatly appreciate it. thx
I currently have WM6.1
Rom Version : 5.2.20931 WWE
Rafio version: 03.12.90
Protocol Version: 4.1.13.56
ExtROM Version: Cooked by gullum

How did you get WM6.1 into your phone? It's the same process.

i bought the wing from ebay, Wm6.1 was already installed

Try flashing the NBH with Flash Center. (Or just skip the USPL file and go to the RUU folder and launch the RUUflasher from there.) If it works, you're hardSPLed.

thvm for your help, really appreciate it. I went back to one of your threads on hot to flash and noticed the little mistake that i had made earlier. I flashed it perfectly and the phone works great. thx again