Database Develop

Help Help Please Anyone..

last night i upgraded my mda vario (wizard) with a new updated rom..while the phone where updating its seem to be stuck at 70% after that the menu that was showing from the update dissapeerd..i could only see my desktop and nothing els, zo i disconnected the device from the usb at 70% to try it again..so i rebooted the phone and thats where the ****s started to happen..because my phone wont turn on anymore it wont even show the bootloader, or the green or red light..it jus seems dead ..anyone got any idee how i can get it to turn on again...
thank you

Try to start the phone in bootloarer. Hold the camera button while turning on, hold camera button until you get the tri colored screen. Then flash T-mobil 2.26 or the Cingular rom. If the phone doesn't start that way pull the battery out for a while.

You can also hold in the reset button for 10 seconds and then hold the camera button, and press power

i tried all of that allready it jus wont start or go in bootloader screen,nothing happends at all ,.no lights nothin..it jus seems like its bricked..but before the flash of the new rom everything where jus fine..

sounds like a half way flash with dead battery. You may try your luck on a charged battery.

My 8125 Frozen on Cingular splash screen

Hey everyone, i couldnt find any information that helped me so i thought i would let you all know my problem. when i turn the phone on it freezes on the cingular splash screen and my ipl is 2.25, spl 2.25, gsm 02.25.11, os 2.25.11.1. When i go to the red blue green screen, my usb connection shows up on the white part, but when i try to install the official cingular rom it doesnt connect. it says that i need to make sure that i have a usb connection. then the screen goes white. any sugesstions?

tarusdg said:
Hey everyone, i couldnt find any information that helped me so i thought i would let you all know my problem. when i turn the phone on it freezes on the cingular splash screen and my ipl is 2.25, spl 2.25, gsm 02.25.11, os 2.25.11.1. When i go to the red blue green screen, my usb connection shows up on the white part, but when i try to install the official cingular rom it doesnt connect. it says that i need to make sure that i have a usb connection. then the screen goes white. any sugesstions?
Click to expand...
Click to collapse
Which Windows are you using ? if you are at WinVista it won't work,always use WinXP,secondly do the following :-
1. Disconnect your phone from the usb cable,shut down any firewall,disable any Anti virus,Reboot your PC.
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. On your PC Open windows Task Manager...>Tab Processes...>wescomm.exe...>End process
4. Power off the phone completely (Not stand-by,shut off completely),or you may take the battery out for few seconds
5. Make sure your phone is not Connected to the PC via USB cable and remove the dummy Sdcard or mini-Sd card
6. Get your phone into Bootloader mode (Multicolor screen) by pressing camera button + Power on button
7. Reconnect your phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Be sure that your battery is charged over 70%)
8. "USB"will appear on the bottom of the screen of the Bootloader (Multicolor screen)
9. Run the Upgrade again and it will work fine without any problems.
10.Never use Bluetooth sync for the Upgrade
While upgrading, the ActiveSync program will not go on, however the upgrade is running.Please be patient when you're flashing your device, even if 98%. It can wait a little bit, 5 ~ 7 minutes.
Don't cancell the flash or get the phone off the usb cable till it confirms "Congratulations" or stops with an Error!!!
Hope it'll work,
Cheers

i dont have a cradle just the usb cable. will tha be a problem?

i tried it with just the usb cable and it didnt work
any other suggestions?

it is time to junk it or donate to XDA-developers

...fades to white screen upon connection
I have a similar issue...my 8125 Wizard gets stuck on the splash screen. I follow the above procedure to the letter, get into Bootloader, make the USB connection, and then when I try to flash ANY ROM as it starts to connect the screen fades to white and it comes back with Error 274...Connection error! It doesn't matter what ROM I try...Button's 1.05, Love ROM, T-mobile 2.26, or the Cingular 2.25 ROM...the screen fades to white as it starts to connect. Any ideas Doc P?
The splash screen says:
IPL 2.25
SPL 2.25
GSM 2.25.11
OS 2.25.11.1
BTW, i've tried the MTTY_updateROM.exe ...miniSD card ...r2sd all approach ...the device is CID locked...

[Help please] HTC T-Mobile MDA died after ROM upgrade

I updated my HTC and all gone well, after reboot it showed a screen as it is going to start up normally and showed a IPL, SPL, ROM and OS and than stoped and after some time it shut down and I could not start it again.
When I connect it to a charger or USB it is not showing any signals there is no led that should be on when it is on charger and it is inposible to turn it on or in bootloader. There is no way to turn it on not soft reset no hard reset nothing works.
Please help me.
Is there anything I can do to turn on it?

If anyone can help me here is my e-mail [email protected]
And by the way it is G4 device and I unlocked it with Lokiwiz03

Pleaseeeee
C'mon people help me please.
Anybody knows how to get it back to life, please?

Mda won't sync or charge after bad flash

I was following the guide for putting the button rom, and then the loki. all that went ok. The problem was I replaced the nbk file of the ipl/spl 3.08 file with the one from a radio download (radio 27111) and when it flashed now the phone doesn't recognize anything plugged into the usb port. Won't charge or nothing. no lights come on . I tried holding the camera and power button, and then pressiong the reset button, taking both hands off the buttons and then pressing power again and holding it to get in the bootloader multicolor screen, and it doesn't recognzie it either on my pc there. any suggestions?
it still loads the buttons flash rom and goes to the phone itself (old stock windows mobile) and pressing the start button takes like 15 secs to show the drop down start menu.

oh also it still says ipl 1.08 and spl 1.08 in the buttons splash pic....
although i was trying to put that 3.xx one

if anyone has:
tmobile RUU_Prodigy_1081002_108_10910_TMO_US.exe
please send me or give me a link. I tried googling but they all lead to the ftp server here (as we know has no files now on it). Someone said that worked for them. I tried another tmobile official one and it doesn't work. In boot loader (the multicolor screen) when i connect the usb the word usb shows, but the rom program on xp doesn't see it and I get an error 260 update error which says it can't connect to my phone.
Update: I tried the newest official tmobile software from their site and it does nothing. It does show the "usb" at the bottom in bootloader when I connect it, but the tmobile software (or anything) doesn't recognize it and gives a error 260.
When in windows (as it still goes) it shows the unknown battery thing and doesn't show how much battery life is there, along with being real slow. I didn't have a sim card in it ever while doing this but prob has no service either.

eh
50 views and im the only one with that problem ever? no one knows?

correction. it DOES charge.

same problem
hey, Ihave exactly the same problem, any luck finding a cure for this? would like to flash another rom but can't sync, do you know how to flash from SD card maybe that'll help us?

petesavva said:
hey, Ihave exactly the same problem, any luck finding a cure for this? would like to flash another rom but can't sync, do you know how to flash from SD card maybe that'll help us?
Click to expand...
Click to collapse
does your read sd cards?
no luck yet.

Hello,
Let`s start... maybe this will help you too guys... But first of all i want to know if your phone`s go in bootloader mode... ( just reset with the stylus and then hold just the camera button) and then it goes in the 3 color screen...
Let me know if you`ve got your phone`s in bootloader mode.... Replay as soon as posible... and... did you`ve tried another USB cable?
If you want to charge the phone, get the battery out, put it back, put the charger in, then hold the power button until it starts chargeing... 10-15 seconds max.
And if you get the phone in bootloader mode do this: http://forum.xda-developers.com/showpost.php?p=4104858&postcount=3
Regards.

eXPLOiTeD said:
Let`s start... maybe this will help you too guys... But first of all i want to know if your phone`s go in bootloader mode... ( just reset with the stylus and then hold just the camera button) and then it goes in the 3 color screen...
Let me know if you`ve got your phone`s in bootloader mode.... Replay as soon as posible... and... did you`ve tried another USB cable?
If you want to charge the phone, get the battery out, put it back, put the charger in, then hold the power button until it starts chargeing... 10-15 seconds max.
And if you get the phone in bootloader mode do this: http://forum.xda-developers.com/showpost.php?p=4104858&postcount=3
Regards.
Click to expand...
Click to collapse
it is in boot loader.. shows ipl 1.01 and spl 1.08 in the red section, and when i connect usb cable (good one) usb shows on the white at the bottom. in device manager i dont have the windows cd usb devices. in fact the pc doesnt even beep.

hnmm
bump......

Please Help! Phone is bricked?

I just woke up to a nightmare. I reached over for my phone and i found it dead unplugged from the charger. I thought to myself... "Alright, let's begin charging it... I probably forgot to put it on the charger last night"
I plugged the phone into the charger and the phone powers on...
After it boots, i it prompts me to connect the phone to my computer... Strange...
I plug in the phone to my computer and Zune pops up with c101002e error code.
Now i did some research and it looked like my phone somehow got bricked... so i found the following link and sure enough, my error code is on the list of known troubles.
The Windows Phone Support Tool is not working on my phone, After following the steps i get the attached screenshot error.
My next step is to reflash... however. Following These instructions, I cant seem to get my phone to boot into the tricolor bootloader screen!
PLEASE HELP! Any input would be greatly appreciated!

You say "After it boots, i it prompts me..." is windows booting before the error pops up?

The phone is off... i plug the charger in, and it boots as in it turns on. Once it turns on, windows does not load. instead it's telling me to connect to computer. I connect to computer and the error appears

already tried an hard reset??

Not able to perform a hard reset... I hold down both volume bottons while the phone is off and press the power/lock button to power it on. while holding on the volume buttons... the phone just goes to the connect to computer screen.

Try taking out the battery. Leave it out for a short while then replace it & check its securely in place. Reboot & see what happens. The phone shouldn't brick when charging or sleeping. Good luck!
Sent from my HD7 using XDA Windows Phone 7 App

Might try this and see if it helps
http://answers.microsoft.com/en-us/winphone/forum/wp7-sync/windows-phone-7-error-code-c101002e/2e7cd10e-4123-46ea-844b-e3aed54eb6bd
may be the camera key is pressed down by the case and stopping it from booting

I do not have a case with the phone but i always did have a problem with that camera buttom... it does seem to be kinda pushed in... I hate this...

what is ur version???
just u can jailbreak the 7004 or 7008 by chevron...