Database Develop

Help.. .Killed my Qtek... PC BSD durning ROM Update

So, I have updated my ROM many a time, and was updating my qtek wizard with the 2.17 WWE rom, at 3% through, my PC does a Blue Screen of death... Now my wizard is just locked at the Color Bar screen saying IPL 2.17 and SPL 2.17.
DID I KILL IT?

sdattilo said:
So, I have updated my ROM many a time, and was updating my qtek wizard with the 2.17 WWE rom, at 3% through, my PC does a Blue Screen of death... Now my wizard is just locked at the Color Bar screen saying IPL 2.17 and SPL 2.17.
DID I KILL IT?
Click to expand...
Click to collapse
No you didn't kill it. =)
Take the battery out, and put it back in.
Hold down the Camera button while pressing the power button
You should be back to the three color bar screen
Connect to your PC using the USB cable
Run ROM upgrade
That should fix it. Make sure you don't have anything running on your PC during the upgrade. The only time I've ever bluescreened during a ROM upgrade is when I was playing MP3s in the background.

summiter said:
sdattilo said:
So, I have updated my ROM many a time, and was updating my qtek wizard with the 2.17 WWE rom, at 3% through, my PC does a Blue Screen of death... Now my wizard is just locked at the Color Bar screen saying IPL 2.17 and SPL 2.17.
DID I KILL IT?
Click to expand...
Click to collapse
No you didn't kill it. =)
Take the battery out, and put it back in.
Hold down the Camera button while pressing the power button
You should be back to the three color bar screen
Connect to your PC using the USB cable
Run ROM upgrade
That should fix it. Make sure you don't have anything running on your PC during the upgrade. The only time I've ever bluescreened during a ROM upgrade is when I was playing MP3s in the background.
Click to expand...
Click to collapse
Exactly this solution works fine with me!

three color bars on tmobile MDA
Hi,
I tried a hard reset with pressing camera button and power button together but it comes on with a three color bars
RRU
IPL 1.01
SPL 2.26
USB
But while flashing new ROM it says there is a connection problem with the PDA and yes, it does not show connected on Active Snyc 4.5...
Any help how to flush it with any ROM. I also tried to download the Tmobile software but it agains says the phone is not connected with USB.
When I connect the phone wiht USB, computer makes beep like somthing is connected....I can not figureout what is wrong.....any help???
thnx

Issue Closed: Need help after upgrding Cing 8125 to AKU2.3

I have one of the early Cingular 8125s with version 1.08 IPL/SPL and was trying to upgrade using summiter's latest 2.3 using his multi installer +CF2.
Pre-upgrade phone info
SPL: 1.08
IPL: 1.08
ROM 1.8.xxx (Can't remember the rest)
CID unlocked using lokiwiz (Done again just before upgrading)
SIM unlocked using lokiwiz (Done only when I first got the phone)
I originally selected the first option in the installer, which would have also upgraded my bootloader. This ended up just getting me into the RGB bootloader screen and failing, after which I would just remove the battery and reset.
I selected option 2 to update without changing the BL, and the installation seemed to run fine...until I tried to turn it on again after the flash.
Booting past the first cingular splash screen took longer than normal. Although it showed the 2.24 OS, I did not see any line stated the GSM version, only IPL, SPL and OS. Is that bad?
When I got into windows it was super slow and navigating was a chore. I rebooted, and the phone didn't turn back on! Read the forums a bit, I guess it can suck up more juice than expected during flashing, so I charged for a few hours....now I can boot up, but with the below issues.
1. I don't have a phone connection. Even in the new comm manager, I click on the phone setting, but it doesn't connect. The antenna up at the top has an exclamation point instead of the bars next to it. I can't get to the keypad screen, and I can't make any phone calls. Did the GSM upgrade possibly not complete? Is is supposed to show up in the splash screen?
2. I can't sync anymore. Nothing happens when I plug the phone in. I am not even sure it draws a charge, since I had it charging over usb for a few hours after upgrading and it didn't seem to charge much. AC power for a few hours did the trick and let me boot up.
3. Since I can't call anyone, its basically a PDA for now. But even the PDA function and general operation of the phone are really really slow. It takes time to drop down the start menu, or change screens. (~30 seconds to push "start") I am able to input personal info and it saves OK even after soft reboot. I have since cleared all info.
4. The battery indicator constantly shows the charging icon, even when unplugged. Battery status shows "Unknown." Phone doesn't know how to turn off after idle time, even though option is checked in settings.
I'm hoping someone here has some advice. Since I can't connect through activesync, it will be hard to make any upgrades. I had read about an miniSD card executable...hopefully that applies here.
Should I try booting into the Bootloader and connecting a USB cable? Holding the camera button and powering on doesn't seem to help.
Anyway, any input would be greatly appreciated guys. If there's any info I need to clarify, let me know.

New progress made
I am able to boot into the boot loader and when I connect by USB, it shows as connected in XP. Can I perform upgrades/downgrades from here?
Any suggestions as to the right path to take to end up with the latest ROM? Maybe I should stick with the Cingular release?

Good news everyone! (lame futurama reference)
I managed to install the cingular formal release once I booted into the bootloader.
In case anyone has this same problem, you hold the camera button down and press the power button. Let go of the power button and the RGB bootloader screen should show up. When connected to USB, you can install these packages.
When I'm gutsy enough again, I'll try summiters latest.

please help me out if you can!!

i was attempting to update my rom version on my 8125 and i guess my pc need to reset it's self while in the process of updating my phone. During my pc reboot it would not restart, due to my bios settings( my pc was to hot). It cooled off and when i started it back up my phone has
4 Colored srips (RED, GREEN, BLUE, AND WHITE)
It reads in the red strip
IPL 2.25
LOWER IN THE RED STRIP IT READS
SPL 2.25
IPL is in white letters and SPL is in yellow letters.
Also it reads RUU in the upper right corner of my screen.
when I plug in my usb cable it reads usb in the bottom left corner of my screen but nothing happens, Can someone please help me out on this?????

mrnicegoy said:
i was attempting to update my rom version on my 8125 and i guess my pc need to reset it's self while in the process of updating my phone. During my pc reboot it would not restart, due to my bios settings( my pc was to hot). It cooled off and when i started it back up my phone has
4 Colored srips (RED, GREEN, BLUE, AND WHITE)
It reads in the red strip
IPL 2.25
LOWER IN THE RED STRIP IT READS
SPL 2.25
IPL is in white letters and SPL is in yellow letters.
Also it reads RUU in the upper right corner of my screen.
when I plug in my usb cable it reads usb in the bottom left corner of my screen but nothing happens, Can someone please help me out on this?????
Click to expand...
Click to collapse
If it is reading your usb in the lower corner you are ok...just re-flash the rom.
***update? custom rom?? cid/sim unlocked??? If you answered NO to cid/sim unlocked, that NEEDS to be done first...if you have a G3 use lokiwiz or wizard service tool AFTER you reflash the stock rom from your provider. Once unlocked you can flash a custom rom. If you have a G4 phone that is a bit trickier. Read in the stickies for HOW TO's***

mrnicegoy said:
i was attempting to update my rom version on my 8125 and i guess my pc need to reset it's self while in the process of updating my phone. During my pc reboot it would not restart, due to my bios settings( my pc was to hot). It cooled off and when i started it back up my phone has
4 Colored srips (RED, GREEN, BLUE, AND WHITE)
It reads in the red strip
IPL 2.25
LOWER IN THE RED STRIP IT READS
SPL 2.25
IPL is in white letters and SPL is in yellow letters.
Also it reads RUU in the upper right corner of my screen.
when I plug in my usb cable it reads usb in the bottom left corner of my screen but nothing happens, Can someone please help me out on this?????
Click to expand...
Click to collapse
First of all download official carrier's Rom from it's website,
1. Make sure your phone is not Connected to the PC and remove the dummy card or SD/MMC card if any
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t use the IrDA or Bluetooth for the Upgrade)
4. when usb appear in the bootloader mode(tri color screen) at the bottom of the screen
5. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
If you have done the method of unlocking with lokiwiz,than go for the upgrading procedure as per the guide,you must read and correctly follow the whole method,don't skip any step,but if your phone still cid locked,then read and understand the method of unlocking,read the unlocking guide,after that continue with upgrade

[HELP] Is my Diamond dead? (for advanced users)

Hello,
Today my Diamond probably died.. in fact it is MDA Compact IV.
I got new battery from ebay (original 1340mah from HTC). I put new battery to MDA but it didn't start. I tried to plug charger, but there is all time such situation:
- d-pad shine twice like during charging,
- one vibra ring
- splash screens
- turn off after about 10 seconds
I change battery with old one but there is the same problem.
I can make Hard Reset, I can enter bootloader mode, but nothing more.
Vibra, splash, reset again and again. If I pull off charger- phone is dead, there is no possibility to switch on.
Does anybody know such problem? Is there any solution? I read somewhere that is probably dead mainboard, is it true?
Please somebody help me, I got my MDA only one week
There was warranty but I installed HardSPL and unofficial ROM, so I can't turn it to service

Does the phone reset when you're in bootloader as well?

No, I can enter bootloader mode.
I have such words on screen:
DIAM200 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Vict STAGE_PVT v0x20
USB.
It stays in bootloader. I can quit bootloader by soft reset. If I pull charger off then Diamond turns off.

you sure no liquid went in? or any falls?
if not - probably a faulty ROM or Radio... what you can try to do is first fully charge your phone (just keep it turned off and attached to charger).
once charged fully (you can tell by the d-pad light) when in bootloader, connect it to USB to your computer. it should change from Serial to USB on your phone. then flash a radio (preferably the one that came stock) via the Custom RUU method.
if that doesn't work... repeat steps above for a ROM...
and make sure u keep your fingers crossed good luck!

Ok, situation for today looks this way:
1. I can't turn the phone ON.
2. If I connect phone to charger or PC phone turns ON. There is one vibra ring and splash screen without numbers in corner (ROM, radio etc). Splash screen in ON for about 10-12 second, then phone is rebooting. It going all around continuously.
3. During displaying splash screen I CAN enter bootloader mode or make hard reset. If I enter to bootloader and plug charger off then phone turns OFF.
In bootloader mode there is such text on display:
DIAM200 MFG 64M
SPL- 1.40. OliNex
MicroP-Diam (LED) v11
pSOC-Vict STAGE_PVT v0x20
USB.
Windows in my PC makes sound as connected UBS equipment, but ActiveSync is not connected (grey).
4. After running bootloader mode I CAN run DiamondCustomRUU.exe. It looks like updates, ROM, Radios are installed- indicator is running in my PC and also on Diamond screen. After finishing installation there is again: reset, vibra, splash screen 10-12 second, reset, vibra... etc.
I tried to install many ROM, Radios and all SPL but final is always the same.
5. I tried to install original SPL- installation looks successful, but after reset in bootloader mode there is still: SPL- 1.40. OliNex. This point is most strange for me.
6. I can connect via mtty (but activesync is still gray), but I don't know commands for mtty and I don't know what more can I do through mtty.
For me right now most important is to turn SPL back- then I can return device to service.
Does anybody knows some solutions? I'm opened for any suggestions...
Thanks,

go and stay in boot loader mode (tri-stripe colored bands) and flash with custom ruu another rom, have you tried this simple step?
EDIT: sorry I read right now you tried, so bad, so unlucky!

Seems like the battery contacts on Ur device are faulty - The gold plating might have worn out and the contact with battery terminals is bad, so device registers critical battery and shuts off.
Try cleaning the contacts with a piece cotton or a soft cloth soaked in alcohol on all the contacts. (avoid too much - should not enter the device!!)

Could you try charging your battery without phone?

Mda won't sync or charge after bad flash

I was following the guide for putting the button rom, and then the loki. all that went ok. The problem was I replaced the nbk file of the ipl/spl 3.08 file with the one from a radio download (radio 27111) and when it flashed now the phone doesn't recognize anything plugged into the usb port. Won't charge or nothing. no lights come on . I tried holding the camera and power button, and then pressiong the reset button, taking both hands off the buttons and then pressing power again and holding it to get in the bootloader multicolor screen, and it doesn't recognzie it either on my pc there. any suggestions?
it still loads the buttons flash rom and goes to the phone itself (old stock windows mobile) and pressing the start button takes like 15 secs to show the drop down start menu.

oh also it still says ipl 1.08 and spl 1.08 in the buttons splash pic....
although i was trying to put that 3.xx one

if anyone has:
tmobile RUU_Prodigy_1081002_108_10910_TMO_US.exe
please send me or give me a link. I tried googling but they all lead to the ftp server here (as we know has no files now on it). Someone said that worked for them. I tried another tmobile official one and it doesn't work. In boot loader (the multicolor screen) when i connect the usb the word usb shows, but the rom program on xp doesn't see it and I get an error 260 update error which says it can't connect to my phone.
Update: I tried the newest official tmobile software from their site and it does nothing. It does show the "usb" at the bottom in bootloader when I connect it, but the tmobile software (or anything) doesn't recognize it and gives a error 260.
When in windows (as it still goes) it shows the unknown battery thing and doesn't show how much battery life is there, along with being real slow. I didn't have a sim card in it ever while doing this but prob has no service either.

eh
50 views and im the only one with that problem ever? no one knows?

correction. it DOES charge.

same problem
hey, Ihave exactly the same problem, any luck finding a cure for this? would like to flash another rom but can't sync, do you know how to flash from SD card maybe that'll help us?

petesavva said:
hey, Ihave exactly the same problem, any luck finding a cure for this? would like to flash another rom but can't sync, do you know how to flash from SD card maybe that'll help us?
Click to expand...
Click to collapse
does your read sd cards?
no luck yet.

Hello,
Let`s start... maybe this will help you too guys... But first of all i want to know if your phone`s go in bootloader mode... ( just reset with the stylus and then hold just the camera button) and then it goes in the 3 color screen...
Let me know if you`ve got your phone`s in bootloader mode.... Replay as soon as posible... and... did you`ve tried another USB cable?
If you want to charge the phone, get the battery out, put it back, put the charger in, then hold the power button until it starts chargeing... 10-15 seconds max.
And if you get the phone in bootloader mode do this: http://forum.xda-developers.com/showpost.php?p=4104858&postcount=3
Regards.

eXPLOiTeD said:
Let`s start... maybe this will help you too guys... But first of all i want to know if your phone`s go in bootloader mode... ( just reset with the stylus and then hold just the camera button) and then it goes in the 3 color screen...
Let me know if you`ve got your phone`s in bootloader mode.... Replay as soon as posible... and... did you`ve tried another USB cable?
If you want to charge the phone, get the battery out, put it back, put the charger in, then hold the power button until it starts chargeing... 10-15 seconds max.
And if you get the phone in bootloader mode do this: http://forum.xda-developers.com/showpost.php?p=4104858&postcount=3
Regards.
Click to expand...
Click to collapse
it is in boot loader.. shows ipl 1.01 and spl 1.08 in the red section, and when i connect usb cable (good one) usb shows on the white at the bottom. in device manager i dont have the windows cd usb devices. in fact the pc doesnt even beep.

hnmm
bump......