Related
Yesterday I took my battery out of my phone to remove the dust from inside the phone. When i replaced the battery back into the phone, it booted up into the tri-color screen and has been there ever since. I haven't modified the phone since receiving it from AT&T at all. When i actually noticed the problem I tried to reset the phone through the hole on the bottom of the phone. At first, it booted up normally but was out of batteries since it had been running on a bright screen for a couple of hours. Thus it turned off immediately. I have tried to reset it again but it seems to do nothing. Since then when I put the battery back in and I turn the phone on it returns to the tri-colored screen and it says SERIAL in the bottom white area. When plugged into my computer it says USB in the white area. On the top of the tri colored screen, in the red area, it says:
KAIS1*0
SPL-1.56.0000
CPLD-8
I thought about downloading the newest ROM update from HTC but my phone wont sync with my computer, and the tutorial says it needs to in order to install properly. If anyone could help, please let me know!
Update!
I put the battery back into the phone and it booted up just fine....it was a little slow and worked normally for a couple of minutes. Soon it started to act up. When i plugged the phone into my computer it automatically started to freeze, when i unplugged it from the computer it would work just fine! I then turned my phone off again and now it is back to the tri-color screen again!
try hard-resetting the phone.
To do this, hold down the two soft keys at the front while pushing the stylus into the reset hole. Just make sure to back up any data you want, as it will delete it all (files, contacts, etc.)
Tried a Hard Reset
When I finished it, it just went back to that tri-colored screen. Now the phone will turn on every 10th time i try and work for a couple of minutes. When the screen turns off it wont turn back on when i push the power button. The green light still blinks though.
I have been having this exact same problem for a little while now, any help would be more than appreciated.
EDIT: Everything about the phone was AT&T stock ROM from Oct. '07.
i think it replacement time
hi all once again.i was using my kaiser yesterday then my phone went into tri screen.tried hard reset soft reset.phone reboots in tri screen.im using Duttys Official WM6.1 Rom 5.2.19716 UC.
ihave kais130 mfg /spl 1-0.0lipof /cpld-8 on screen.
if there is a solution to this i would appreciate help in resolving.thanks in advance
Another sad update!
Well as of this second my phone works okay...slower than usual....but in an hour or so the screen will turn off and the phone will stop working, i will take the battery out.....wait about 45 minutes and hope that it boots up normally. No one has any idea why this is happening to multiple people? I have had this phone for maybe 3-4 months. Is the failure rate that broad and fast on these phones???
WTF
This phone is ridiculous. Now if I keep the phone plugged into my computer so the screen wont time off, the phone works just as normal. The moment I unplug the phone from charging it decides to die on me after an hour or so!
this happened to me last nite.
spent hours and hours trying to fix.
ended up reflashing orig att rom..
everything is fine..
proceeded on to a cooked rom and all is well..
added some apps ..
so far -- awesome
Good News!
Magically my phone started syncing with my computer randomly. Thus it allowed me to flash the rom with the original ATT rom and so far my phone is back to normal working great!
tri screen sorted
i bought my kaiser off ebay..i couldnt sort tri screen.i had various roms on at various times .i had no warranty. on pay as you go.decided to take to local o2 shop.got it back today fully working for free.took them 8 days.
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
You better take a look here for a solution : http://forum.xda-developers.com/showthread.php?t=423486
jezzaflyboy said:
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
Click to expand...
Click to collapse
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
if you go the wiki page for this device it might help you out, or try searching google
shuman said:
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
Click to expand...
Click to collapse
try contacting GSLEON or Jockyw2001
Go here http://forum.xda-developers.com/showthread.php?t=393337 , download attached files and start from step 4
what kind rom are you using if its 6.0 then theres the problem flash to a 6.1 rom
How do I fix the rom 6.1? It is total dead seemz, not even power light! any help is much appreciated.
Did you try bootloader mode? Power+Camera+Soft reset button?
Kraize
I dont belive I tried the boot loader mode. I'll do that, however, what should I see if go into bootloader mode? what is the next step. Thanks everyone for their help, much appreciated.
No luck, I tried bootloader mode, same thing, all i get green power light and black screen!
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Hey,
any help with a Tri-colour screen problem?
other thing is, i can't tell where to read your reply from
Jerry
Hey,
can anyone help me with AT&T 8925 Tri-colour screen problem?
msn please @ [email protected] because I have no idea how to read the reply to this post, I'm new to all this..
It froze one day, soft reset and it came back in tri-screen. I plugged it into the charger and it worked..
Did that a few times now it won't do anything and it is stuck in tri-colour with:
KAIS1*0
SPL-1.93.000
CPLD-8
i didn't instal anything, it just locked up and not nothing I do, soft or hard reset will make it come back.
I also wanted to install an Australian OS to Telstra maybe, but not sure which ROM or RUU to download.
Can anyone help please, this is extremly important... and donations will be paid on completion of problem.
Thanks
jasonrush said:
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Click to expand...
Click to collapse
what if set can't conect with mtty and no conectivity with the pc and only green lights on the set?????
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
montreezy said:
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
Click to expand...
Click to collapse
Try following all these steps.
http://forum.xda-developers.com/showthread.php?t=433835
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
I think you have a hardware problem
Maybe the flex
maybe the microcontroler
maybe the rom Try a new again instead the one you have
for skip this screen alignment try to search on the forum there are many ways
I simply conect it to activesync even if it is stucked at this screen it syncs with your pc via activesync... then go to explore...Windows folder.... startup... and delete the file called welcome.lnk then softreset.
Yeah my wizard is stuck to @ tab the screen etc.
I can't connect to activesync becuase activesync does not detect the phone.
Nevermind!
tnt929 said:
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
Click to expand...
Click to collapse
Try to replace a new battery, i have the same problem be4. And i discovered the battery is bulked. So I go to buy a new one, and problem is gone now.
still stuck
I have the same problem, i tried looking through explorer but i couldnt find the file to delete so that i could bypass this startup. If anyone figured anything out let me know please.
[email protected]
thanks!
1. Do a soft reset. (small hole on the right side)
2. When screen is black hold camera button, this will boot into bootloader
3. Connect USB cable (USB will show over left softkey)
4. Try to flash a new ROM.
I did this process a few times with different roms.. the best I had was using the HardSPL process, and then the NBD_v8.3_8MB rom.
Hi, I'm new to XDA Dveloper. sorry if its already questioned..I don't have time to search for them, I'm running my laptop on battery that only will last about 15 minutes..and I have my electricity out..
Yesterday, I got My diamond exposed to water...it was raining hard and I was on my bike with my diamond in my pocket..
when I got home, my diamond begin to act strangely, it keeps lower its volume(to vibrate state) when I try to press the increase volume rocker, it goes back down to vibrate. but I manage to shut it down with slide2shutdown...and charge it (the battery only 7% left). this morning I get up and switch on the diamond, but It doesn't boot like usual(theTOUCHDiamond sceen)...
it only shows 4 bars (RED, GREEN, BLUE, and WHITE)consist of:
RED BAR with this:
DIAM100 64M
SPL-1.37.Olinex
MicroP-Diam (LED) v11
GREEN Bar with:
PSOC-Diam Stage_PVT v0x30
BLUE Bar : blank
WHITE Bar with
Serial (only "serial is written, nothing more)
That all, and when I try to connect with USB cable, it demands Qualcomm CDMA Drivers...(I use My friend's laptop....no activesync installed)
anyhelp would be appreciated.
thanks
Its strange..., Now my phone could boot normally, but the volume control still error..it keep decreasing( i tried to increase it but it keep getting back to 'vibrate' is this becaus the water?
EDIT: I'm sorry...its still the same, if I restart the device..it shows the 4 colored bars screen again. when I try to reset it, 1 of 10 attempts is likely that diamond boot normally..but the volume error is still there...can sum1 help me?
PS: Sorry, I don't know that I could edit my post..
bellsprout said:
Its strange..., Now my phone could boot normally, but the volume control still error..it keep decreasing( i tried to increase it but it keep getting back to 'vibrate' is this becaus the water?
EDIT: I'm sorry...its still the same, if I restart the device..it shows the 4 colored bars screen again. when I try to reset it, 1 of 10 attempts is likely that diamond boot normally..but the volume error is still there...can sum1 help me?
PS: Sorry, I don't know that I could edit my post..
Click to expand...
Click to collapse
what are you trying to hardreset device..??
A hard reset should only be performed if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings—
the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
Try flashing back to stock rom?
Sent from my GT-P1000 using XDA App
Hi!
I have a boot problem also.
I used Memo ROM about 1 month ago. That was worked well still today. I restarted my Diamond today, it was not boot correctly. Only reboot the phone after showing the ROM information. I made hard reset and put back the rom again, but the phone is not boot properly.
Could to help somebody for me?
I solved the problem.
I downloaded the original rom (included with radio rom) from htc.com.
I put the phone to bootloader mode and flashed this original ROM.
After flashing finished, my diamond boot to WM6.1.
I don't know what was the problem, but it works again...
I hope never happening this again!
Hi guys. I need help ASAP. I purchased a RP2 and I'm experiencing the following: randomly my phone screen won't turn on after I lock it. When the screen is active and I'm using the phone everything is okay, the problem appears when after I'm done and I lock it sometimes it won't turn on (the phone is still on, buttons vibrate and it makes sounds). The only """"fix"""" is to hard reset it by holding the power button for a couple of seconds.
I TRIED EVERYTHING! Restoring the phone to factory settings, flashing official Android 9 ROM, downgrading to Android 8.1 and the problem persists! I don't know if by installing an unofficial ROM would solve this or if the flex from the screen is loose so I gotta tear it down and reconnect it.
There's no way for me to RMA it since 1) warranty is void and 2) I'm from Argentina.
Please guys I beg for help I dont know what to do. Thanks for reading