Database Develop

My kaiser died after flash :(

Hi. I tried to flash my kaiser to new Dutty's wm 6.1 rom (had Dutty's v3 before so i had hardSPL) and after the rom update process completed my kaiser died , screen is always black no matter i connect it to charger or push power, is there any possibility to bring my phone back 2 life?

Have you taken the battery out?

Have you tried flashing from SD card?
http://forum.xda-developers.com/showthread.php?t=336158&highlight=flash+from+card
Worked for mine when i bricked it.

i have taken battery out , it wont help. also flashing from sd card works only when u can actually power on the device and i cant do it. name of my rom wasnt RUU_signed.nbh it was : Ruu_Signed_Duttys_WM6.1_5.2.19716_1.64.08.21.nbh maybe thats the reason of error

Well did you try the special key sequence to try to turn it on?

special key sequence? U mean both softkeys and stylus into reset hole?

Can you get it to the HSPL screen?
hold camera button and stylus into reset hole?
If you can to there you can reflash it using the sc card method.

3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
Click to expand...
Click to collapse
not the soft keys

thanx but it wont work, if i could enter bootloader i would just reflash the rom, but i cant get my phone on, screen is all the time black. if i plug in a charger there is no charging led too.

Ok, so your saying you tried it and it doesn't work?

im saying this doesnt work because my phone is totally dead. i cant get any response, it just wont turn on.

ok I'm taking it that you didn't try that sequence because you won't say that you tried it.

Hell no he/she ain't tried it. Probably has no idea what you are telling him to do.

Well Belizibub told him, I just started reading between the lines and noticed that he never admitted to trying it.
I love your avatar Tater.

can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.

how come i try to enter bootloader , the phone is D E A D, it doesnt respond on any key cominations. i cant see even blank screen, nothing, it just wont turn on.

take the battery out and plug it into the charger, if a red light comes on thats a good thing if not then you probably have whats known as a "bricked kaiser" and sent it in for repairs or go buy a new one and save that one for parts.

marcini said:
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
Click to expand...
Click to collapse
LOL, not even worth it.

So let me ask this, Why was this thread started? Was someone seeking help? Has someone provided the possibility of help? Do you think that the devils friend didn't understand that to this requester of help, that his phone appeared to be dead? Or is it possible the Devils right hand man knows something that the requester of help doesn't know and kindly attempted to share it with him, just to have the secret unlock code ignored.
Try up up down down left right left right a b select start.
That will fix your phone.
ps, what I'm getting at is if you haven't tried it then you need to try it. The special key config could possibly turn the phone on for you.

OK, now I see this same conversation going on in 2 different forums by the same person. Here and in Dutty's latest 6.1 release.
I noticed you are an Orange user. I have seen Multiple Orange users trying to flash radios to their phone and locking them up. I suggest looking/searching for one of those threads and see if they have a solution.

Help me Please

Ran the Kaiser unlocker on my phone, went through all three steps, and now my phone is just a black screen. The buttons light up, but thats it. Did hard reset, soft reset. Will show ATT screen, and then just black. I dont know what to do.

TheNational22 said:
Ran the Kaiser unlocker on my phone, went through all three steps, and now my phone is just a black screen. The buttons light up, but thats it. Did hard reset, soft reset. Will show ATT screen, and then just black. I dont know what to do.
Click to expand...
Click to collapse
Only so that someone CAN help you please state the following:
1. what ROM and carrier did you have on your phone before this problem?
2. What ROM were you trying to flash?
3. what are the three magical steps that you actually DID?
Bill

Reply
I have an ATT Tilt, trying to unlock to T-Mobile
Downloaded Olipro SIM/CID unlocker
Opened the EXE, went through all three steps, my phone went right along my pc, then when it re-started, a wav file (or some sound file) was skipping, the windows mobile screen flashed, now the lights turn on under the buttons, screen is black.
Did Hard and Shot resets, just get ATT splash
Checked in original thread, didn't see anything that referenced this issue
Just need some help, if anyone can.
Thank you all very much

I Think I Messed Up My Tilt While Unlocking Help!!

ah! i was using the unlocking program from the forums to unlock my tilt. i got to the 2nd step. and then from the 2nd step when it was restarting it showed the att start up then the 3g start up then it stays on a black screeen. i took out the battery and tried again and same thing. it stays on the black screen. i even reset the phone and same thing! idk what to do!! please help!

cid or sim unlock?
If it is the sim unlocker, which I think you are using the second step is to check your radio. Therefore, this is occurring possibly because you installed hardspl. Try a hard reset then search this thread:
http://forum.xda-developers.com/showthread.php?t=334679

yes i was doing the sim unlock. idk how installed hardspl. (im farely new to the whole windows mobile deal)... i tried doing the hard reset but it does the same thing. (hard reset = green button, red button and power button all at same time?)

no that does not equal hard reset. Didn't we go over this with you already?
Hold down both soft keys and insert stylus. soft keys are the two keys that have horizontal lines or dash whatever you want to call it. So hold those two down then insert stylus. You will receiving a warning. When you receiving this warning hit the green button. Then you will receive a notification to hit the green button again (the send key).

i did the hard reset, windows mobile installed, and it went back to the black screen.
so now what?

Somekid said:
i did the hard reset, windows mobile installed, and it went back to the black screen.
so now what?
Click to expand...
Click to collapse
I had the same problem u have to flash your original rom back to normal for evrything to go back, hard reset wont work.

Just stumbled on this thread as well so I thought i'd add a little information. I had this Exact same problem. Black screen after step 2. I went ahead and tried to do the 'unlock' of the phone even though i couldn't see anything. I dont know if it worked or not, but whatever. Did a reset, still black.
So I went ahead and flashed HardSPL 3.29, still black as I expected.
I THEN installed a WM 6.1 cooked rom that requested said HardSPL to be precise it was this one http://forum.xda-developers.com/showthread.php?t=416276
Anywho after flashing that rom, everything was good again, the screen worked as it should etc.
My guess was that the Hard SPL was screwing things up because my phone was still on the original ATT WM 6 rom.
Anywho, all is well. I hope this helps someone else down the road.
MF

Stuck at boot screen

I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you

I think you have a hardware problem
Maybe the flex
maybe the microcontroler
maybe the rom Try a new again instead the one you have
for skip this screen alignment try to search on the forum there are many ways
I simply conect it to activesync even if it is stucked at this screen it syncs with your pc via activesync... then go to explore...Windows folder.... startup... and delete the file called welcome.lnk then softreset.

Yeah my wizard is stuck to @ tab the screen etc.
I can't connect to activesync becuase activesync does not detect the phone.
Nevermind!

tnt929 said:
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
Click to expand...
Click to collapse
Try to replace a new battery, i have the same problem be4. And i discovered the battery is bulked. So I go to buy a new one, and problem is gone now.

still stuck
I have the same problem, i tried looking through explorer but i couldnt find the file to delete so that i could bypass this startup. If anyone figured anything out let me know please.
[email protected]
thanks!

1. Do a soft reset. (small hole on the right side)
2. When screen is black hold camera button, this will boot into bootloader
3. Connect USB cable (USB will show over left softkey)
4. Try to flash a new ROM.
I did this process a few times with different roms.. the best I had was using the HardSPL process, and then the NBD_v8.3_8MB rom.

Blackstone bricks!! Please help!!!!

Hello guy,
After flashing new rom (official release) on my Blackstone, works fine for a month, after start the home screen being black like the phone is off but he was not. I try first hard reset from the button located next to the sim card, splash screen appears after went black again. I did not realized is a problem with the screen and I perform a hard reset (volume up+down & power up) . The phone perform the hard reset because I heard the power up sound, plus for about one minute I have the screen on, asking me to make the screen line up. During the screen line up the screen went black again and no way to see it showing something again. The problem is in active sync the phone is not recognized anymore, I can't flash it again (I try run RUU but give a error message to connect the phone) plus I'm going blind without seeing anything on the screen. My question is there is any way to solve this problem.
Thank you in advance.

Although screen is black, you should still be able to get into bootloader by normal procedure (turn off device, hold vol down & then press power on). Once in bootloader try flashing (you may wanna try returning phone to stock rom as it sounds like your screen has become loose from motherboard and needs fixed under warranty).
To return to stock rom follow guidelines at bottom of first post in this thread.

Still not working
Thank you for the quick reply, I manage to flash it again with the original rom, but nothing happen, the screen is still black. Probably as you said is something wrong with the display. Another problem is I don't have any more warranty; maybe there is a solution to solve the problem?

The Blackstone is out for less than one Year. Your should really have warranty. oO

Yes you wright but I’m 10000 km from home where who knows where the receipt is. Still hopping there is a solution, maybe I can fix it somehow. By the time I get home the waranty is gone. Thanks.

open it up, and attach the ribbon cable back in, just take your time if you need the htc touch hd service manual, i have it. if you wish to use it let me know i will post it here.

That is going to be a big help because I never open up a phone, I watch couple of times some videos on you tube but that’s all about. Anyway I have to open it because I flash it with 3 different roms and still the screen is black. Even when flashing does not showing anything on the screen. I remember for my old blackjack I had a app called My Mobile to see the screen on your desktop I install that I so the splash screen , the align the screen but I couldn’t go more taping the screen of the phone by looking to the desktop.
Thank you for your help and I waiting for the service manual.
Thanks’ one more time.

You can get the service manual here: http://htcdriver.com/index.php?page=htc-blackstone-touch-hd-service-manual

Start downloading. Thank you

Keep us up-to-date on your progress so we can aid & assist if possible
Ta
Rick

Fallen Spartan said:
Keep us up-to-date on your progress so we can aid & assist if possible
Ta
Rick
Click to expand...
Click to collapse
Thank you,
First I have to find a place where I can buy the tools, probably in couple of days I let you know about the evolution of the HTC operation.

You dont have the possibility to contact youre retailer and require a copy of the receipt?

Since the phone got an IMEI number, you could probably just send them the phone and they'll see that you still have warranty on it.
I'd call them before sending the phone, also.. don't forget to restore the spl etc..