MMS on TuMa 1.4 - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hello,
TuMa is great But in messaging i dont see the folder mms, just Text Messages and Outlook E-mail.
Can you help me, someone.
Thank you

First off you'll need make sure you install the Arcsoft MMS app, and you'll also need to set up an MMS account... I don't know how to do this manually but I use the CAB I posted here...
As you will see from the thread, the CAB does other stuff as well, but onceI have done this then added the GPRS/MMS settings for my provider I get an MMS folder in Messaging which didn't exist before... (and it works!)

Related

MediaNet Not working after MMS install

Ok, Like many, I have been using the threaded text messaging (Palm) on the Tilt for a few months now. As you all know, the MMS was built into the Tilt's text messaging app. So I had to install the 3 MMS files to enable MMS and ad this icon back into the mail folders. The 3 files are:
wpbear at&t proxy folders
arcsoft MMS enable
arcsoft MMS composer 4.2.8.1
When this is installed and then a soft reset is done, I can NOT get on mediaNet or use any application that uses mediaNet or the web. For some reason it just stopped working as of this morning. Anyone else having simular issues or have any suggestions? Thanks in advance.
Anyone on this? Do any of you use threaded text messaging on the tilt? I would be willing to try another one providing it had the MMS within it that worked unlike the palm one or even an alternative to keep the MMS within the windows mobile email section without having it attached to the text messaging.
Seriously, anyone elce using this config and notice that medianet stoppede working?

Palm Threaded App!!! Good News

I first purchased my tilt on nov. 28 and on jan. 11 it would not sync to my pc. To make a long story short ATT sent me a new Tilt. When I recieved the new phone I simply installed wm6 threadded app for higher aku version phones. No messing with hidded files, just a simple .cab install and it works fine. Hooray
did get the mms part of the palm app to work? i've been using this palm threaded app since i got my kaiser last october, and sms threading works fine, easy cab install. just that mms gets an out of memory error.
uc4life said:
I first purchased my tilt on nov. 28 and on jan. 11 it would not sync to my pc. To make a long story short ATT sent me a new Tilt. When I recieved the new phone I simply installed wm6 threadded app for higher aku version phones. No messing with hidded files, just a simple .cab install and it works fine. Hooray
Click to expand...
Click to collapse
Hi:
Like the second poster, I'd like to know if MMS is working.
Also, would you please post which cab you used, since there are several floating around?
Thanks so much!
I have MMS plus threaded SMS working on a stock ATT Tilt ROM.
grizzley said:
I have MMS plus threaded SMS working on a stock ATT Tilt ROM.
Click to expand...
Click to collapse
Hi:
That's great to hear.
By any chance could you help me get it going on my Tilt?
cincy1020 said:
Hi:
That's great to hear.
By any chance could you help me get it going on my Tilt?
Click to expand...
Click to collapse
Get this:
http://rapidshare.com/files/61245824/MMSsetup.zip
Then do this:
http://forum.xda-developers.com/showpost.php?p=1569374&postcount=16
Your MMS will be with your email accounts. Be sure to choose "Cingular" as the default for the MMS once you get it setup. To do that, just go to MMS > Options > Servers > and choose ATT MMS.
grizzley said:
Get this:
http://rapidshare.com/files/61245824/MMSsetup.zip
Then do this:
http://forum.xda-developers.com/showpost.php?p=1569374&postcount=16
Your MMS will be with your email accounts. Be sure to choose "Cingular" as the default for the MMS once you get it setup. To do that, just go to MMS > Options > Servers > and choose ATT MMS.
Click to expand...
Click to collapse
Hi Grizzley:
THANKS SO MUCH!
I had read through so many threads on the subject, that I was a bit overwhelmed, and was nervous to try it out.
Your instructions worked perfectly (at least so far, lol).
Thanks again!
I'm glad it worked. I have been using it for about 2 months and from what I can tell, I have had no problems.
this thread is a little misleading, this is a fix that has been covered way back in the begining, and grizzly pointed to the correct post for that. The reason most chef's used a certain arcsoft version in the cooked roms was so that we could have seperated mms and sms accounts in the default messaging section.
SO just to clarify for people, this is to use palm threaded app with Arcsoft MMS. THIS IS NOT to get the mms portion of the threaded app to work...
shogunmark said:
this thread is a little misleading, this is a fix that has been covered way back in the begining, and grizzly pointed to the correct post for that. The reason most chef's used a certain arcsoft version in the cooked roms was so that we could have seperated mms and sms accounts in the default messaging section.
SO just to clarify for people, this is to use palm threaded app with Arcsoft MMS. THIS IS NOT to get the mms portion of the threaded app to work...
Click to expand...
Click to collapse
Very good point Shogun. I think, at least for me, all the other threads from a long time ago have so much conflicting information. I just wanted to be able to use threaded SMS, but not lose mms completely. There were so many posts made before this one, and yes I read all of them lol, but it just became overwhelming to figure out which cabs were the most recent, what devices were they tested on etc.
But, thanks to this new thread (and Grizzley's help) I was able to find an easy solution to have both threaded sms and mms working.
Thanks
By the way, I am using your threaded sms cab, THANKS for making it
Hi:
This solution is working very well for me. My only problem is that for some reason text in landscape mode is very small (I usually use large font).
Is there any way to set text in landscape mode to stay the same size as in portrait mode?
Thanks!
Sounds great! Can PPCPimBackup keep track of this program? Or is there any other program that can backup sms as fast and easy as PPCPimBackup?
I have the annoying problem of text messages from the future from a specific friend. Will this screw up my usual messaging? It would see that the phone would be smart enough to know a message from the future if one hour off.
Anyway. I'm drunk and posting. Weeee.
I did the WM6.1 upgrade and finally have (most) of my stuff back to normal.

Just got the MMS working in the Palm threaded app

Yes, just figured it out. Not sure if anyone else has ever got it working on the Kaiser but I just installed theses 2 CAB files from my ETEN M800 original PRE-INSTALL CABS because they were ones installed that had the MMS working on the M800 and bingo, it works on the Kaiser. Anyone interested in the CABS, let me know. I can send out for someone to host them. They dont seem to do anything else to my Kaiser but MAKE THE MMS WORK!
Raspster said:
Yes, just figured it out. Not sure if anyone else has ever got it working on the Kaiser but I just installed theses 2 CAB files from my ETEN M800 original PRE-INSTALL CABS because they were ones installed that had the MMS working on the M800 and bingo, it works on the Kaiser. Anyone interested in the CABS, let me know. I can send out for someone to host them. They dont seem to do anything else to my Kaiser but MAKE THE MMS WORK!
Click to expand...
Click to collapse
Just a couple of questions.
1.) which ROM are you using. WM6 or WM6.1
2.) What version of ArcSoft MMS are you using?
3.) Which Palm threaded SMS are you using as there are many variations out there.
ROM is WM6.0
Just uninstalled Arcsoft as it is now not needed.
Its the Palm threaded labeled WM6 version.
UPDATE - I just realized its the ETEN PHONE SERVICE 2.0 that enabled the MMS in the Palm threaded! I have not tested incoming MMS's but I was getting them on my M800 with this CAB installed. ****ty Sprint phone is my other service and they are blocking MMS's so I cant send with my other phone but I have been able to send thru the MMS in the Palm with zero problems!
Raspster said:
ROM is WM6.0
Just uninstalled Arcsoft as it is now not needed.
Its the Palm threaded labeled WM6 version.
Click to expand...
Click to collapse
Man I was hoping that you were going to say WM6.1
I have a .cab package that works w/ Arcsoft MMS 4.2.8.1 and Palm threaded SMS.
Well, I have WM 6.1 on my Glofiish M800 and the MMS in the Palm threaded is working no problem in that so I don't think WM 6.1 is any problem.
send the files here.. ill try it.. cuboosh[nospace]@[nospace]gmail.com thx.
This has always worked for me with MMS.
http://rapidshare.com/files/89233954/shogunmark_wm6_threaded.cab
I send/recieve MMS with the original mms prog and the SMS is taken care of by palm threaded...
SH4YD33 said:
This has always worked for me with MMS.
http://rapidshare.com/files/89233954/shogunmark_wm6_threaded.cab
I send/recieve MMS with the original mms prog and the SMS is taken care of by palm threaded...
Click to expand...
Click to collapse
hey
i've installed it now
and if i press the sms icon...it doesnt take me there..it goes to like either windowslive..outlook and such..no more sms? anyway to fix this??
TIA
SH4YD33 said:
This has always worked for me with MMS.
http://rapidshare.com/files/89233954/shogunmark_wm6_threaded.cab
I send/recieve MMS with the original mms prog and the SMS is taken care of by palm threaded...
Click to expand...
Click to collapse
i want to smack you.. this guy claims MMS is working from inside the palm app..no need for ARCsoft
That is correct. I will email you the file tonight to host it. Its a small cab that does not do anything elce that I can tell other than enable the MMS part of the palm threaded. Only problem I have is when I take a picture that is set to 3 megapix it does not scal the picture down to 300k or smaller. Is there a way to set something to send up to 600k...? A reg hack or change? I had to set my camera to 1 megapix to get the picture file to 300k or less. I know the treo 750 would auto crop down the picture but this is not working on other phones that have it. It also seems alot more stable than the ARCsoft MMS. I was getting every pic, voice, vcard that came thru 100%. I also installed the CAB to my friends 8525 and it works on that also. Looks like it works with any GSM phone ATM... Very nice find as I like the threaded in the palm version better than the one in WM6.1.
bapass, You gotta set it up to direct you to the palm threaded somehow. I thought when you install the palm threaded app, it automaticly sets that. Atleast for me it did. What version of the palm threaded are you using..? If you are using the HTC home plugin, the SMS on that will send you to the palm if its installed. Then you can do the REG edit to get rid of the ARCsoft or just un-install the CAB if you are using that version but since the TILT has the MMS out of the box attached to the SMS, it should get rid of it for you when you install, but this is different with every different version of the palm threaded out there. Mine is the one labeled WM6 PALM THREADED. Hope this helps.
cuboosh, you got mail.
ok, as raspster stated it actually works! now i need to find the regedit to disable arcsoft from taking the MMS before i fully uninstall it.. damn it i know it was on 4winmobile.com b4 but now i cant find it.. but yes i can verify i can send MMS from inside the palm app on my tilt!!!!!!!!!!!!!! CONGRATS MAN!
there is a reghack for 600k ill try to find it and reply back.
ok i tried regedit to 600k its not sticking.. but i have it sucessfully working both ways.. if you use exchange for email u can just disable arcsoft by making the following change..
edit the registry to rename HKLM/Software/MS/Inbox/SVC/MMS1 to MMS1OLD, Soft Reset.
now you dont have to uninstall it!
i am sucessfully sending/receiving MMS inside of the palm app using the cab file raspster posted and this regedit.
UPDATE!!! ive also figured out how to get it to auto re-size picture.. im currently testing it once i get it to work flawless ill post intrsuctions! its looking good so far though!
Thats great cuboosh!! I am so glad we got this working right! The palm threaded is by far the best I've seen for WM. Now it is finally complete! If you can get the re-sizing to work, we will be golden as then I can MMS the million PIC's I currently have that were taken at 3M. LOL
GREAT NEWS! it WORKS! fully 100% including picture resize! i will be posting the .zip file which contains the files/.reg files you need + instructions! and ill link to this thread once done
cuboosh said:
ok i tried regedit to 600k its not sticking.. but i have it sucessfully working both ways.. if you use exchange for email u can just disable arcsoft by making the following change..
edit the registry to rename HKLM/Software/MS/Inbox/SVC/MMS1 to MMS1OLD, Soft Reset.
now you dont have to uninstall it!
i am sucessfully sending/receiving MMS inside of the palm app using the cab file raspster posted and this regedit.
UPDATE!!! ive also figured out how to get it to auto re-size picture.. im currently testing it once i get it to work flawless ill post intrsuctions! its looking good so far though!
Click to expand...
Click to collapse
I have a Palm Treo 680, do you have anything that will allow me to recieve my pictures in regular size?
Charles P.

remove MMS from messaging.

Updated to wm6.1 and finding it a real drag to work around the MMS when making a new SMS in 'messaging'. Is there any way I can edit the menus to remove the MMS option?
Thanks!
Is there an advantage to have it separate from SMS?
jomtones said:
Updated to wm6.1 and finding it a real drag to work around the MMS when making a new SMS in 'messaging'. Is there any way I can edit the menus to remove the MMS option?
Thanks!
Click to expand...
Click to collapse
Good question, I'd also like to knwo the answer.
What do you mean it is difficult to make a new sms.... click Messaging, click new click sms type????
That's my thought also!
If you want to separate your SMS and MMS, you need to search for and install a version of Arcsoft that does not use a merged inbox.
i dont think its possible to use a separte inboxes with kaiser roms
you can do a temporaraily fix if you are desperate and this will be creating two folders inside the inbox one called sms and one mms, but to be honest i dont think its logical to separte these two! in old devices we used to have this now they are merged (why taking step backward)?
I know some of the cooked ROMs have them separate. I prefer them together.
jomtones said:
Updated to wm6.1 and finding it a real drag to work around the MMS when making a new SMS in 'messaging'. Is there any way I can edit the menus to remove the MMS option?
Thanks!
Click to expand...
Click to collapse
There's a cab in my 4shared folder that has them separated, but honestly if your sole reason is that it is too much work to have to click new--then scroll down one more space to "sms" then it makes me think that installing a new version of archsoft and running the connection wizard again will also be too much work.
You shoul consider installing htc action screen with will allow you to create a new sms very easily. Also, remember that once you have a thread for an individual you don't need to select a new message. Just go to the conversation with them and it will send sms by default.

ArcSoft MMS on WM6.5?

So I read that MMS doesn't work in WM6.5 and the solution was to install ArcSoft MMS and fix it that way. The only hitch is...after I installed the CAB, I can't seem to figure out where the actual program is so I can set everything up. Looking through File Explorer I see nothing in Program Files that looks related, nor does there appear to be any kind of new settings panel anywhere. I apologize if this is a stupid question but I searched through all the ArcSoft topics and everyone seems to have been able to figure this out except me.
Help? I'm using a Kaiser on T-Mobile with Witschey's bare WM6.5 ROM, if that helps. Thanks in advance.
I'm using Kaiser with WM6.5 build 23081 from T.i.R 19k with ArcSoft MMS version 5.2.2.22 bundled in the ROM. MMS is working good to the same operator in Indonesia
I use 2 steps in setting my MMS:
1. Settings - Connections - Connections - Add a new modem conn (the second paragraph)
2. Messaging - MMS Options
bmw2320 said:
I'm using Kaiser with WM6.5 build 23081 from T.i.R 19k with ArcSoft MMS version 5.2.2.22 bundled in the ROM. MMS is working good to the same operator in Indonesia
I use 2 steps in setting my MMS:
1. Settings - Connections - Connections - Add a new modem conn (the second paragraph)
2. Messaging - MMS Options
Click to expand...
Click to collapse
For the first part, what's the section heading that "Add A New Modem Connection" is under? For me, it's "My Work Network" and that doesn't sound right for adding MMS settings...additionally, I'm trying to use this info to fill in the required fields:
http://support.t-mobile.com/doc/tm21387.xml
But that doesn't list a username or password, which the settings are asking for. Am I doing something horribly wrong here? I admit I know virtually nothing about how MMS works, so writing like you're talking to a 4-year-old would be helpful
Oh, and also just to clarify, I'm using the version of ArcSoft linked in the second post in this topic:
http://forum.xda-developers.com/showthread.php?t=476947
...anyone? Still unable to send/receive MMS and have found nothing which seems to be useful =/

Categories

Resources