I tried many times to cid unlock my phone with lokiwiz02b, but keep getting error 294, invalid vendor id. I think I'm the only one!
Are there any other posibilities or suggestions?
I have a SPV M3000.
If I can't cid unlock I would like to upgrade my old orange (dutch) phone to a new 2.xx orange Rom. Can I download a dutch Orange rom version 2.xx somewhere on the internet
thanks
bokkie
Related
I've QTEK 9100 SPV M3000
version IPL 1.03
SPL1.03
GSM1.4.10
OS1.3.1.4
I try to change FRENCH to ENGLISH ROM using this rom:RUU_Pridigy_1060701_101_11310_QTEK_WWE_Ship.exe
But I recieve this ERROR [294] : INVALID VENDER ID message.
(One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.)
Can somebody please help me upgrade my qtek 9100
You need tyo clear the CID lock.
Find the aWizard tools on the forum, read an execute the indicated steps (unlock CID and make a backup.
Then run the upgrade again.
Works very wel (at least on my dutch MDA vario)
Hello all, please help me...
I have a QTEK 9100 and it only takes a couple of the QTEK RUU updates and only a couple of the I-Mate K-JAM RUU updates. Most importantly it will NOT update to the latest QTEK 9100 RUU rom nor will it not update to the latest K-JAM RUU rom either. I prefer to have the latest K-JAM rom as that is what I have in my other MDA VARIO and it's great!
Now the error I receive is Invalid Vender (vendor?) ID... I HAVE unlocked the phone (both SIM unlock AND CID unlock)... I have CID unlocked it with both aWizard AND lokiwiz and I have also installed the EnableRAPI thing.
I have done everything I have found on these greate boards here at XDA-Developers and I have found nothing to fix this problem. I am able to use custom roms as well. But I can't use the K-JAM one. ALWAYS error 294 invalid vender id.
Does anyone have any ideas?
Thanks in advance
The only thing I can suggest is that the CID unlock didn't work fully. It's worth checking the text as the lokiwiz runs to make sure the CID unlock actually goes through - see various posts under the lokiwiz thread on the general wizrd forum for information. dropping back to the QTEK Custom ROM and then running the lokiwiz has been a solution.
still no luck
At the moment I managed to put a different custom rom on there (button's custom) and even after doin the lokiwiz unlock and then attempting to put the latest imate rom still have no luck, still the same error: Invalid Vendor ID. Also i think i tried the same with the original qtek rom as suggested and had no luck... maybe someone could point me to the custom original qtek rom that would fix my problem? Maybe i used the wrong one?
Thanks in advance
I used this one CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe - it's in the FTP site area
tried it didnt work
Hello my friend,
I tried the custom rom you suggested and THEN unlocked the device again, also did enableRapi, then attempted the latest Imat K-Jam rom update and it failed with error 294 invalid vender (vendor?) id... with the red green blue screen on the QTEK 9100... For additional info it displays IPL 1.01 and SPL 1.0.1.0000
Please let me know if you have any more ideas on how to update my QTEK9100 to the latest I-Mate K-Jam rom successfully. Also, for some reason one of the older I-Mate roms updated successfully, but the latest one doesnt.
Let me know and many many thanks...
Hi,
I had the same trouble. Try this:
Load the custom rom that JoninLA suggests.
Then unlock the CID using aWizard.
Then load the original Imate KJAM ROM from the ftp site
Then load the AKU2 Imate KJAM ROM
That should work.
Should I CID unloack with aWizard in between all these updates? I would think so right?
Thanks again
I did as jasoncheesemanuk suggested... with the custom rom on there i UNLOCKED CID, then upgraded to original IMATE rom, then attempted to upgrade to latest IMATE rom (without unlocking again) and i got the same problem: error 294 Invalid Vender ID
Please help, is there a solution out there? Why is this QTEK 9100 so stupborn?
Many thanks in advance for anyone's help on this.
I tried many times to cid unlock my phone with lokiwiz02b, but keep getting error 294, invalid vendor id. I think I'm the only one!
Are there any other posibilities or suggestions?
I have a SPV M3000.
If I can't cid unlock I would like to upgrade my old orange (dutch) phone to a new 2.xx orange Rom. Can I download a dutch Orange rom version 2.xx somewhere on the internet
thanks
bokkie
I downloaded the WM6 rom of HTC Herald from Thai website and tried to upgrade my Dopod C800's rom.But I faced a problem that "error invalid vender id".So I would like to know that how could I fix this problem,please.!!!
Thanks for your help.
Invalid vender ID
I got the same as yours. I'm THAI but working in CHINA so, I bought Dopod S1 (same model as Touch). THe OS is CHN so I also want to change the OS to ENG. After reading some advices in this web, I install the CID unlock and following with the RUU WWE (Dopod asia) and it turns out the "invalid vender ID".
Sill don't know how to do.
I want to install WM^on my Vario, but I can't get further than step 17- installing 2.26 Rom.....
Everything did go fine, I have IPL 1.01 and SPL 1.06, en when I want to update tot 2.26, i get an error [294] INVALID VENDER ID
Now I'm stuck at the RGB screen.
So I installed button's rom again, now i have a working Vario, but when i try it again, AGAIN the INVALID VENDER ID error, stuck at the RGB screen...
wtf?
Use WST to make sure you have successfully CID unlocked your device.
If it is confirmed, get another version of RUU from other ROMs and copy nk.nbf to that RUU.
farris said:
I want to install WM^on my Vario, but I can't get further than step 17- installing 2.26 Rom.....
Everything did go fine, I have IPL 1.01 and SPL 1.06, en when I want to update tot 2.26, i get an error [294] INVALID VENDER ID
Now I'm stuck at the RGB screen.
So I installed button's rom again, now i have a working Vario, but when i try it again, AGAIN the INVALID VENDER ID error, stuck at the RGB screen...
wtf?
Click to expand...
Click to collapse
Your phone is still CID unlocked,after flashing and downgrading with Button's Rom 1.05,you are supposed to use lokiwiz 02b to SIM/CID unlock the phone and then upgrade to T-mobile 2.26.
Cheers!
yes, that was the problem, i didn't read the "press C in lokiwiz.bat'- part of the tutorial!
Now i'm running tnt touchflo
But is there any Dutch translation of TNT? Or Dutch WM6 ROM wich I can use? Or do I have to go back to WM5?