i tried to CID-unlock my Wizard (Orange M3000) with aWizard V1.2, and the tool said all was ok. Now when i try to update to another ROM, the screen goes blank after the reboot is initialised. Tried to enter Bootloader modus manual... Also a blank screen. After a soft reset the Wizard starts normal....
Seems i ****ed up the bootloader.. anyway to restore this?
I allready tried a hard-reset, and tried different ROM's... Please help?!
(sorry for my bad english... (I'm Dutch)
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
jjmorris100 said:
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
Click to expand...
Click to collapse
install this official rom from HTC
http://rapidshare.com/files/66085556/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.exe
Its for RUS QTEK_AO7.
Then you will have SPL 1.10
I have similar problem
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
hi, can any1 send me a link for a ger version of wm6.0pro ?
Wigo said:
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
Click to expand...
Click to collapse
I'm not sure that I understand well, but if you flash from SD, it finish in 100% and than go to three color boot screen? ....
Hi alebo caf Vašek ;-)
My problem is that always stuck on boot image HTC or Windows Mobile blue screen. I can´t use way copy necesseary files to root of phone memmory and than run sspl etc...I have to turn manualy to three-color mode, than connect USB cable and run upgrade utility but still froze instalation on 2%, If I use SD card methode with BREEIMG file uploading doesn´t start....
p.s.: Ak by si mal dáku radu tak možno lepšie vysvetliť po česky ;-). Moje ICQ 208-393-971
Dík
CZ Rom
I would like to install new ROM into my Mteor, but I have no experience doing it. I do not know which version to try, all I need is to be able to enter czech letters on HW keyboard as with original ROM. Any sugestion? I preffer personal answer in czech language ([email protected])
I was following the tutorial on upgrading my Wizard.
I had successfully flashed Button Rom to my imate k-jam (G3) twice and CID unlocked it. The T-Mobile 2.26 update failed and the recovery process lost connection
It now boots to the bootloader screen and shows IPL 2.26 and SPL 2.26. After the initial bootloader screen stays on for a while (3-5 minutes???), it goes into a continuous reboot cycle where it boots into the bootloader screen and then immediately reboots. If I take the battery out, it will reset the cycle.
The tutorials says to reflash it back to ButtonRom 1.05, but it reboots before that will work.
The battery had 82% before the T-Mobile 2.26 flash attempt.
Any ideas?
My phone is a G3 att 8125. I flashed to 2.26 which I always do before installing any rom then installed X2A Haseebs Iphone Killer and it stalled at 57% for over an hour so I unplugged it and hard-reset it. I have installed this rom about twice and it works fine. Now my phone starts up and goes straight to the Tri-colored bootscreen. When I plug the phone in it displays that it is connected via USB but the computer doesnt recognize it. IPL 2.26, SPL 2.26 as displayed on the screen. PLEASE HELP! The RUU doesnt recognize the phone with 2.5.2.
Problem Solved! I tryed flashing it with the 2.26 rom for the 5th time and it got through fine
hi
how much times u have flashed ur mobile with 2.26
My Qtek is stuck in the Qtek splash screen. I am unable to soft or hard reset. If I remove the battery and charger for a few minutes then reinstall them it boots up then I get a message saying installing custom setting and a whole load of programs install and the device resets but does not get passed the Qtek splash screen. If I connect it to my computer using activesync I am able to open the device using explore. Any ideas what the problem could be.