Related
ROM version: 2.18.0.0 WWE
Radio version: 02.25.11
ExtROM version: Faria v5.0
SIM Unlocked
CID Unlocked
Ok, so heres the deal. I've been reading thru the forums for the past two day, and have got nothing but a headache. Keep in mind that I'm fairly new to this. I managed to get WM6 Faria v5.0 on my phone after a few hours of fidiling around
What I'd like to put on my phone is NBD, not sure which version tho. I have it downloaded onto my computer, but when i got to flash it. It come up with Error 208, File Error or something to that nature. Anyone have any advice, or where i can find a very good guide on how to do it? Any help would be appreciated
Navyaz05 said:
ROM version: 2.18.0.0 WWE
Radio version: 02.25.11
ExtROM version: Faria v5.0
SIM Unlocked
CID Unlocked
Ok, so heres the deal. I've been reading thru the forums for the past two day, and have got nothing but a headache. Keep in mind that I'm fairly new to this. I managed to get WM6 Faria v5.0 on my phone after a few hours of fidiling around
What I'd like to put on my phone is NBD, not sure which version tho. I have it downloaded onto my computer, but when i got to flash it. It come up with Error 208, File Error or something to that nature. Anyone have any advice, or where i can find a very good guide on how to do it? Any help would be appreciated
Click to expand...
Click to collapse
as you say that your device is SIM/CID unlocked and already using wm6 Faria rom,then I don't think there shud be any problem upgrading to any other new rom,as to the error 208,wud you plz post the exact error what it says,if it say it's a file error...can be related to a missing file called enterbootloader.exe. ,then most probably the file you downloaded is corrupt.which NBD rom you have downloaded.download latest NBD Rom from here and try to flash.
For NBD 9.2
http://forum.xda-developers.com/showthread.php?t=325284
For latest NBD X
http://forum.xda-developers.com/showthread.php?t=335178
But I'll also advice you to flash back again T-mobile 2.26 to have a clear solid base again to start off for upgrading to new rom,it wud give you the advantage of clearing any misappropriations happened during your first install of Faria Rom as it is quite old build.flashing t-mobile 2.26 will give you a new clean base to upgrade make's sure your extended_rom is clean and uncorrupted, it causes all kinds of problems .sure you'll be fine good luck
zabardast_1 said:
as you say that your device is SIM/CID unlocked and already using wm6 Faria rom,then I don't think there shud be any problem upgrading to any other new rom,as to the error 208,wud you plz post the exact error what it says,if it say it's a file error...can be related to a missing file called enterbootloader.exe. ,then most probably the file you downloaded is corrupt.which NBD rom you have downloaded.download latest NBD Rom from here and try to flash.
For NBD 9.2
http://forum.xda-developers.com/showthread.php?t=325284
For latest NBD X
http://forum.xda-developers.com/showthread.php?t=335178
But I'll also advice you to flash back again T-mobile 2.26 to have a clear solid base again to start off for upgrading to new rom,it wud give you the advantage of clearing any misappropriations happened during your first install of Faria Rom as it is quite old build.flashing t-mobile 2.26 will give you a new clean base to upgrade make's sure your extended_rom is clean and uncorrupted, it causes all kinds of problems .sure you'll be fine good luck[/QUOTEA
Ok so I'm downloading NBD V9.2. Now after I flash back to 2.26, then flash the NBD V9.2, am i still going to have the Tmobile look? Just for some reason that really bugs me.
Click to expand...
Click to collapse
Ok so i flashed back to tmobile 2.26 then tried flashing NBD 9.2 and still got Error 208 "File Open Error". So then i tried Flashing from bootloader, the Red, Green and Blue screen and then i got Error 240 "File Open Error". I downloaded NBD 9.2 from the link you provided? You have any idea what the problem could be?
Navyaz05 said:
Ok so i flashed back to tmobile 2.26 then tried flashing NBD 9.2 and still got Error 208 "File Open Error". So then i tried Flashing from bootloader, the Red, Green and Blue screen and then i got Error 240 "File Open Error". I downloaded NBD 9.2 from the link you provided? You have any idea what the problem could be?
Click to expand...
Click to collapse
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
Yes, when i flashed to 2.26 it flashed and loaded just fine, no errors that i could tell. Official rom from my cell phone service provider or who i bought my cell phone from? And im not quite sure waht my IPL/SPL read cuz i flashed back to Faria v5.0
Navyaz05 said:
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
Yes, when i flashed to 2.26 it flashed and loaded just fine, no errors that i could tell. Official rom from my cell phone service provider or who i bought my cell phone from? And im not quite sure waht my IPL/SPL read cuz i flashed back to Faria v5.0
Click to expand...
Click to collapse
ok
ERROR [208] : FILE OPEN
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
as t-mobile 2.26 flashed and loaded good,than there's no problem with your bootloader,Ok,Now do this,remove your phone from the usb cable(disconnect it) and do a Hard reset of your phone by doing this :-
1. Press and hold the comm manager button and voice command button on the device together with one hand
2.Keep the two buttons pressed,and at the same time,with other hand,use the stylus to lightly press and hold the RESET button
the device will reboot and switch back on.
then delete active sync,reboot your PC,Run disk Clean wizard on Drive C:\ ,check all options in Disk Clean options,specially Temporary internet files and perform disk cleanup,after that delete all cookies in Internet options.
than download the latest version of Active sync ver 4.5 and install.
after this go into bootloader mode in your phone and connect to PC,but don't establish connection with Active sync,cancell the connection when it asks
when you connect witusb you'll see small usb showing at the bottom of bootloader screen (tri color screen) if it's there then open the rom file and try to flash,hope it'll be ok.
just post your present IPL/SPL...? it appears in red color when you switch on the phone and on the boot screen at the top.whatever the ipl/spl..? is there at the moment just post it,ok
I still believe the error 208 is due to some missing files,may be the NBD rom is getting some corruption
anyway you can also download official rom from the official site of your carrier ( the rom which came prinstalled when you bought the phone)
or download this rom and see if it flashes:-
http://forum.xda-developers.com/showthread.php?t=332544
Ipl/spl: 2.26
Ok so I did everything you told me to do in your 2nd to last post : deleted activesync and clear cookies and did disk clean, and hard reseted my phone. Then i tried to flash both NBD and TNT and neither of them worked. So then i flashed back to my orignal rom, the one my phone came with. Then tried flashing both of them, and still nothing? I keep getting the Error 208
Current IPL/SPl are both 2.25
Navyaz05 said:
Ok so I did everything you told me to do in your 2nd to last post : deleted activesync and clear cookies and did disk clean, and hard reseted my phone. Then i tried to flash both NBD and TNT and neither of them worked. So then i flashed back to my orignal rom, the one my phone came with. Then tried flashing both of them, and still nothing? I keep getting the Error 208
Current IPL/SPl are both 2.25
Click to expand...
Click to collapse
hmmm !
IPL/SPL 2.25 G3 AKU2 version,
ok,now tell me,when you flashed the original rom,was it successful,did it load up ? is your phone working normal with the original rom ?
I just feel as your phone is still not CID unlock,do one more thing,download this WST tool from the link below,install and run it,then post whatever report it generates,ok
http://forum.xda-developers.com/showthread.php?t=329170
Ah 1
so,when you flashed with T-mobile 2.26 you had ipl/spl 2.26,afterwards you flashed back with your original rom,is it cingular rom ? so ipl/spl 2.25 is registered. Both of these Roms T-mobile and original(cingular or ?) which you flashed are official roms.so only official roms are flashing and not the custom builds,hmm, so custom build rom can only be flashed if device is CID unlocked.
It means may be your device is still not CID unlocked ?
But i did CID unlock, because thats how i got Faria v5.0 on my phone. Do I have to CID unlock everytime i flash?... Ok so i ran that program you told me to and heres what i got.
Wizard Service Tool v4.2
09/10/07 11:22:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378003310489
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9dc4a2 - 9.99M (0x9fd800)
cea9b13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000006f1e0103210403ea17060656
Key Index: 52
All Done.
Can I use the program above to CID unlock or do i have to you lokiwiz to unlock?
Thanks for the help, i really appreciate it!
O and BTW.. i check with that program, My phone is both CID/SIM unlocked
Navyaz05 said:
But i did CID unlock, because thats how i got Faria v5.0 on my phone. Do I have to CID unlock everytime i flash?... Ok so i ran that program you told me to and heres what i got.
Wizard Service Tool v4.2
09/10/07 11:22:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378003310489
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9dc4a2 - 9.99M (0x9fd800)
cea9b13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000006f1e0103210403ea17060656
Key Index: 52
All Done.
Can I use the program above to CID unlock or do i have to you lokiwiz to unlock?
Thanks for the help, i really appreciate it!
O and BTW.. i check with that program, My phone is both CID/SIM unlocked
Click to expand...
Click to collapse
I do believe you that you did the cid unlock but lets be sure,on the wst tool there is a button with cid action written on it,hit it and tell me the report,ok
Reading CID block...
Calculating CID block sum...
CID checksum: 16A253F6
Decrypted stored sum: 4086926D7FFBD060
Decrypted calcd sum: 4086926D7FFBD060
Key index : 52 - Block index: 196
CIDkey: …øA‰òÏ5
CID IMEI: 356378003310489
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
go to this link,there is a attached file 'RUU MUN.zip' download it,then extract,there will be four files in it,ok now open the NBD 9.2 Rom compare there you will also similar named four files,now replace these files with the files downloaded in RUU MUN.zip,after replace run the new RomUpdateutility.lets see if works,ok
http://forum.xda-developers.com/showthread.php?t=334796
ok im kinda confused.. you want me to replace the files from MUNN with the one in NBD, or vice versa?
Navyaz05 said:
ok im kinda confused.. you want me to replace the files from MUNN with the one in NBD, or vice versa?
Click to expand...
Click to collapse
replace the files from MUNN with the one in NBD,
just a hunch may be bootloader of your phone not accepting romupdateutility of NBD,lets replace and see,it might do the trick.
you are awesome.... its loaded NBD... I guess it was a corrupted file. Now does this mean i can put TNT on my phone? If so will i have to replace those files?
Navyaz05 said:
you are awesome.... its loaded NBD... I guess it was a corrupted file. Now does this mean i can put TNT on my phone? If so will i have to replace those files?
Click to expand...
Click to collapse
YES YES YES !!!
You know it got be worried,how come every things fine,your phone is CID unlocked,you can flash T-mobile and official,than why not other custom roms,so I was convinced corrupted romupdatutility,
YUP ! go ahead fire up any wm6 now,I\ll suggest go for TNT excellent ro,see my sig using the same,anyway,i'm glade for you,take care.
Hi All,
I've want to upgrade my Qtek 9100 G3 to a newer IPL/SPL, so i followed the unlocking & Rom upgrade instructions on http://forum.xda-developers.com/showthread.php?t=285435 created by Dr Puttingham.
I was able do downgrade the Button 1.05 ROM version.
So far so good...
the next step (15) CID unlock did work.
Type the letter and press Enter: c
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
could not determine a key index
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: Unable to open host/destination file - The system cannot find the file specified.
result=80072746
Your phone is now CID unlocked....
See device information of wizard service tool:
=> Bootloaders:
IPL: 1.01 (G3 device)
SPL: 1.01 (G3 device)
Built on Sep 19 2005 at 18:00:32
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14406.1.1.1)
ROM: 5.1
Registry AKU: .1.1.1
Radio: 01.12.10
Protocol: 4.0.13.23
if i try to read the CID block from the phone i get an REX error : Current_CID has no value. in the REXX script named: at line number:1092.
I also tried to do this on command line of the qtek:
Cmd>r2sd all
***** user area size = 0x79B00000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
GetDeviceCID: Error - InitDecoder
GetDeviceCID: Error - InitDecoder
You didn't get the proper security level to download a specific image
Can someone give me a pointer where to look, or how to repair this problem.
Kind regards,
Marc
Update
To be complete i used the latest version of lokiwiz03a
Copying C:\qtek\lokiwiz03a\Lokiwiz03\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
could not determine a key index
Thanks for help.
You got a G3 device,why use lokiwiz03a,this version works best with G4 devices and can only generate a SIM unlocking code and doesn't CID unlock the phone.
If you want to SIM/CID unlock your phone,use lokiwiz02b.
As for the WST tool and REXX erorr,which version of WST tool are you using,download the latest version of WST 4.2 and read the thread of WST 4.2 about how to solve the REXX erorr,you have to delete certain old files of older version of WST tool.
Cheers!
The first post contains a screen dump of lokiwiz02b.
The program gave the same error: could not determine a key index.
In the update, I tried the latest version of lokiwiz to give a complete picture. And to be sure it's not a software version problem.
About the service wizard tool by Mestrini:
I'm using version 4.2.1 (2007-10-09) downloaded from:
http://forum.xda-developers.com/showthread.php?t=329170
This states that V4.2.1 (10-10-2007) is the latest version.
I search for the Rexx error : CID has no value, but was unable to find the solution you suggested. Could you please point me to the thread where this is discussed and solved...
Kind regards and thanks for the help,
Marc
Check out this post in the WST 4.2 Tool thread,hope you'll find all the answers here in this thread for your problems.
http://forum.xda-developers.com/showthread.php?t=329170&page=11
Cheers!
I've read the thread, but the problem that i have is probably related to a corrupted CID? The version of WST is not a upgraded version, so a clean install of version 4.2.1.
See WST screendump of SIM unlock action:
Decrypted stored sum: FFFFFFFFFFFFFFFF
Decrypted calcd sum: 769A5E63B0D4DE89
Checksums did NOT match!!
Could not determine a key index to decrypt it.
Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.
The feedback when i read the content of the ROM - zone: CID (bdk1) is all 0xFF. So this is probably what's wrong. But how to correct this problem?
Well,sry I'm no expert on this,its better you post this problem in the WST Tool thread or ask mestrini ,he's the best in here on these problems,I'm sure he'll find out the solution.
Good luck
@zabardast_1
tx for the compliment m8
@marcQ
I read your PM but i prefer to reply here since it might help others in the future.
i must say that it's such a coincidence that i was messing with WST version 4.2.2, which didn't happen for quite some time, and got your PM that lead me to solve another bug
As for your particular case i believe that you have a corrupted/empty CID block thus not allowing WST to read it nor lokiwiz to unlock it and the solution is to write a new one to it.
If WST's "Device Info" works use it to read the key index of your CID block, then go to the "Data Crashes" thread (check my signature) and download the matching CID file for your device.
In case you can't find out your key index write any CID file to your phone just to get the CID block back.
report back
cheers
mestrini
thanks m8
Pleasure is all mine
Yup ! No doubt,you're the maestro
Have a nice day !
Thank you both for the help.
I've managed to unlock my Wizard
Now let's see how upgrading goes...
marcQ said:
Thank you both for the help.
I've managed to unlock my Wizard
Now let's see how upgrading goes...
Click to expand...
Click to collapse
Grrrrrrrr8 !
You are most welcome,glade you got it working.
Good luck
marcQ said:
Thank you both for the help.
I've managed to unlock my Wizard
Now let's see how upgrading goes...
Click to expand...
Click to collapse
HEEYYYYY!!!! Aren't you going to say how you did it?
Come on! The purpose is to help others as well by sharing your procedures (or at least to let me know if my theory was correct)
waiting for report...
Within the past 2 hours, I have flashed 2 ROMS:
1. TNT.19199 Series V.2 (Offcial/Professional/TouchFLO) WM 6.1 Real Port
2. WM6.1 For Wizard OS 5.2.19521 buit 19521 WWE
I did a HardRest to T-Mobile ROM, connected to ActiveSync, went through the XP-ROMUpdate Utility until 100% completed, Clicked on Finished.
Saw the TNT Series It's Right with 2.26, 2.26, 2.25.11 and 2.26.10.2.
Then for some unknown reason the MDA restarted and came back up with the T-Mobile Hard Reset Screen and ask for a tap on screen, etc., to go through a total reset back to the T-Mobile ROM.
What did I do wrong?
Even after the T-Mobile ROM reset I still see the TNT Series It's Right with 2.26, 2.26, 2.25.11 and 2.26.10.2. screen but then my MDA is displaying the T-Mobile Today screen with the default Today stuff.
What do I need to do?
Thank you.
It sounds like your phone is not cid unlocked
Did you follow these steps for unlocking before flashing ??
http://forum.xda-developers.com/showthread.php?t=298613
Tonis said:
Within the past 2 hours, I have flashed 2 ROMS:
1. TNT.19199 Series V.2 (Offcial/Professional/TouchFLO) WM 6.1 Real Port
2. WM6.1 For Wizard OS 5.2.19521 buit 19521 WWE
I did a HardRest to T-Mobile ROM, connected to ActiveSync, went through the XP-ROMUpdate Utility until 100% completed, Clicked on Finished.
Saw the TNT Series It's Right with 2.26, 2.26, 2.25.11 and 2.26.10.2.
Then for some unknown reason the MDA restarted and came back up with the T-Mobile Hard Reset Screen and ask for a tap on screen, etc., to go through a total reset back to the T-Mobile ROM.
What did I do wrong?
Even after the T-Mobile ROM reset I still see the TNT Series It's Right with 2.26, 2.26, 2.25.11 and 2.26.10.2. screen but then my MDA is displaying the T-Mobile Today screen with the default Today stuff.
What do I need to do?
Thank you.
Click to expand...
Click to collapse
You are not CID Unlocked !
Read the sticky tutorial before you brick your device
...too slow
anichillus said:
You are not CID Unlocked !
Read the sticky tutorial before you brick your device
...too slow
Click to expand...
Click to collapse
Used WST V 0.4.0.0 and did a CID Unlock and received notification that CID Unlock completed. Do a Soft Reset which I did do.
Tried again to Flash both ROMS and they did show 100% competed/finished.
MDA softreset and showed both first screens of flashed roms, then went into Windows Mobile T-Mobile.
So, what did I do wrong?
This is the message I received after the CID Unlock:
All Done. CID Unlocking is finished and you
can now flash any ROM to your device.
All Done.
Don't forget to soft-reset device!!
A file with new CID value was created.
A backup file was created in program's
folder to restore to previous state.
This is other data:
Wizard Service Tool - 17 Mar 2008 19:00:36
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: xxxxxxxxxxx
=> Bootloader (SPL):
Version: 2.26.0000 (G3 device)
Built on Jun 7 2006 at 19:18:46
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1 (Build 14955)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ce9dc4a2 - 9.99M (0x9fd800)
aea9b13a - 48.23M (0x303c000)
efb23f92 - 50.95M (0x32f4000)
4fb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000957802013300162f100c05be
Key Index: 8
JUST RECHECKED CID and this is what is shown:
Reading CID block...
Calculating CID block sum...
CID checksum: 23823E0A
Decrypted stored sum: 6705F27B786460AB
Decrypted calcd sum: 6705F27B786460AB
Key index : 8 - Block index: 128
CIDkey: MODULESN
CID IMEI: xxxxxxxxxxxxxxxxx
CID: WIZTMU01
Phone is CID LOCKED
So my phone is not CID Unlocked.
Where am I going wrong?
Thank you.
You didn't read the stickies carefully.
You need to flash the Button's ROM to have your IPL and SPL lowered to 1.01 before unlocking!
YUP !
It is must to have IPL/SPL 1.xx to CID unlock the phone,so read the sticky carefully and follow the method correctly.
Cheers!
Thank you both for helping me. I do agree that one should read very carefully. No excuses. However, there is so much to read and so many postings to read from. Again, I do appreciate your help and now I will find the T-Mobile Origirnal 1.xx ROM to load and go from there.
I will post this and I hope I do not get flamed. These are just suggestions from a new person. Please accept them as such.
1. Why did WST display that my MDA was CID Unlocked when it really was not? Should there be an edit up front to check for the correct IPL/SPL?
2. Why did both ROMs go through a complete cycle and then display that the ROM was completely flashed when it was not. Should there be an edit up front to check to ensure that the CID is Unlocked rather than go through all the install?
3. Why did both ROMS leave the splash screen on the MDA? Is there a way to get ride of them?
I know, read the threads before you take any action. Thank you both! You are right.
1.
CIDkey: MODULESN
CID IMEI: xxxxxxxxxxxxxxxxx
CID: WIZTMU01
Phone is CID LOCKED
WST does NOT show that it is unlocked...
2. Yes, there is checking in the Original RUU, all RUU in our custom WM6 ROMs are modified to bypass the checking. That's why it won't work if you try to flash another Carrier ROM to your Wizard without replacing the RUU program.
3. Just flash your original ROM (IPL+SPL 1.xx), unlock, and flash it again then you will get back the original splash.
starkwong said:
1.
CIDkey: MODULESN
CID IMEI: xxxxxxxxxxxxxxxxx
CID: WIZTMU01
Phone is CID LOCKED
WST does NOT show that it is unlocked...
(Not to disagree with you, but I did get a display that:
'This is the message I received after the CID Unlock:
All Done. CID Unlocking is finished and you
can now flash any ROM to your device.
All Done.
Don't forget to soft-reset device!!
A file with new CID value was created.
A backup file was created in program's
folder to restore to previous state.'
So, WST did display it CID UNLOCKED my MDA. That should be corrected in WST.)
2. Yes, there is checking in the Original RUU, all RUU in our custom WM6 ROMs are modified to bypass the checking. That's why it won't work if you try to flash another Carrier ROM to your Wizard without replacing the RUU program.
(I was addressing not the Original RUU, but the Flashing ROM that does not check or bypasses the checking. Would this help others if this edit was performed prior to executing the complete Flashing?)
3. Just flash your original ROM (IPL+SPL 1.xx), unlock, and flash it again then you will get back the original splash.
Click to expand...
Click to collapse
(Yes, I will do this. Thank you again for your help.)
Don't ever trust the successful message when you unlock CID (This is the same for using LokWiz02 also). Always perform CID check again after unlocking, that is the real status.
Cracking is not easy. Bypassing operations is relatively easy. Adding operations is very hard, so...
starkwong said:
Don't ever trust the successful message when you unlock CID (This is the same for using LokWiz02 also). Always perform CID check again after unlocking, that is the real status.
Cracking is not easy. Bypassing operations is relatively easy. Adding operations is very hard, so...
Click to expand...
Click to collapse
You are correct. One must never ASSUME that something is done. I wonder how many others have fallen into the same trap?
Latest status for me now is that I have:
IPL 1.08
SPL 2.26
01.0.9.10
2.26.10.2
So, I am back to the drawing board and trying to flash again. Tried WST and TNT and still did not take.
Maybe I am doomed to be with what is on the MDA.
Thank you again.
Tonis said:
You are correct. One must never ASSUME that something is done. I wonder how many others have fallen into the same trap?
Latest status for me now is that I have:
IPL 1.08
SPL 2.26
01.0.9.10
2.26.10.2
So, I am back to the drawing board and trying to flash again. Tried WST and TNT and still did not take.
Maybe I am doomed to be with what is on the MDA.
Thank you again.
Click to expand...
Click to collapse
There's no such trap,its just that the method is not correctly followed,either missing doing some step or doing a step incorrectly,resulting in not getting the things done correctly.
WST tool will not work in bootloaders ( multicolored screen) or in the splash screen stuck up.Secondly,TNT Rom is a wm6 rom,it won't flash or work with IPL 1.xx,it has to have IPL/SPL 2.xx and a CID unlocked phone.
after you flashed Button's Rom you got IPL 1.08 and SPL 2.26,reflash the Button's rom a couple of times more to make IPL/SPL 1.xx,it sometimes takes more then one flash to downgrade ipl/spl 1.xx,then apply lokiwiz02b to SIM/CID unlock the phone,upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26 or official stock rom of your carrier AKU 2 Rom,only then upgrade to TNT series wm6 or 6.1 Rom.
Cheers!
zabardast_1 said:
There's no such trap,its just that the method is not correctly followed,either missing doing some step or doing a step incorrectly,resulting in not getting the things done correctly.
WST tool will not work in bootloaders ( multicolored screen) or in the splash screen stuck up.Secondly,TNT Rom is a wm6 rom,it won't flash or work with IPL 1.xx,it has to have IPL/SPL 2.xx and a CID unlocked phone.
after you flashed Button's Rom you got IPL 1.08 and SPL 2.26,reflash the Button's rom a couple of times more to make IPL/SPL 1.xx,it sometimes takes more then one flash to downgrade ipl/spl 1.xx,then apply lokiwiz02b to SIM/CID unlock the phone,upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26 or official stock rom of your carrier AKU 2 Rom,only then upgrade to TNT series wm6 or 6.1 Rom. Cheers!
Click to expand...
Click to collapse
Well I finally flashed TNT 19199 Pro and it did install completely. I did use Button ROM which installed 1.08, 2.26.010.9.10 and 2.26.10.2. Then I used WST to CID unlock. Then I flashed TNT.
The main reason for me trying to flash a new ROM was that my MDA Touch Screen capability is very sporadic. It works some times, but not all the time. The only way I can get it to work after the Touch Screen is no longer touch sensitive, is to re-flash. I know that is not practical, but I want to try to resolve this Touch Screen problem.
Even after this latest Flash of TNT, I am still experiencing the same Touch Screen problem of not recognizing using the stylist.
Any suggestions? I assume that it is a hardware (MDA) problem and not a software (ROM) problem.
!!! USE THIS GUIDE ONLY IF YOU KNOW WHAT YOU ARE DOING !!!
!! READ THE END OF THE GUIDE FIRST(Very Importnat)
Aplication Unlock - lets you run unsigned software
SSPL - Software Second Program Loader is a boot loader after IPL (Initial Program Loader) often seen on smart phones and PDA:s.
- Lets you flash any rom on the phone
SPL 1.09 http://rapidshare.com/files/106089565/MTeoR_-_EUR1.09SPL.rar.html
[B]official HTC ROMS[/B]
RUS
http://rapidshare.com/files/106091396/RUU_MTeoR_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
UNLOCK TOOLS
http://rapidshare.com/files/105133496/Unlock_HTC.rar.html
1. Folder "1"
put the file "SP_AllowCertificateInstall.cab" into the temp folder on you mobile phone (use active sync)
to connect. Execute the cab file on your phone.
2.Folder "2"
make sure you are connected to the phone threw active sync. Now run "EnableRAPI.bat" it will say if
it has succeded.
3.Folder "3"
make sure you are connected to your mobile phone through active sync. Start "MobileRegisteryEditor.exe"
Now go to SPV_C600 than HKEY_LOCAL_MACHINE than Security than Policies than Policies
so that you are in HKEY_LOCAL_MACHINE\Security\Policies\Policies
Now dubble click 00001001 (the first one after (Default)) and change the value to 1
Now dubble click 00001005 (the second one after (Default)) and change the value to 40
4.Folder "4"
put the file "Cert.cab" into the temp folder on you mobile phone (use active sync)
to connect. Execute the cab file on your phone.
5.Folder "5"
install and run HTC Security Manager.msi
select Security Off
Wait
YOUR PHONE IS APPLICATION UNLOCKED
6. Restart the phone
press and hold CAMERA+POWER while powering
you should see spl version
NOTE THAT VERSION
PULL OUT THE BATTERY AND POWER THE PHONE
7.1 Try to flash wwe rom directy
if you have wwe use sspl 1.01 http://forum.xda-developers.com/attachment.php?attachmentid=38680&d=1178637546
WWE rom
http://rapidshare.com/files/106091341/RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar.html
after this you need to begin from step 1 till you see spl 1.10
now you have SPL 1.10 and CID HTC__Z12
jump to step 8
7.2 If 7.1 does not work try
7.2.1.SPL 1.09 http://rapidshare.com/files/106089565/MTeoR_-_EUR1.09SPL.rar.html
now you have SPL 1.10 and CID HTC__A07
7.2.2.you need to run the RUS update
RUS
http://rapidshare.com/files/106091396/RUU_MTeoR_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
after this you need to begin from step 1 till you see spl 1.10
jump to step 8
8.flash any rom
now to flash an rom use SSPL 77.7 http://rapidshare.com/files/106072098/SSPL.rar.html
Copy the coresponding SSPL to the ROOT of the PHONE not the SD-CARD
run SSPL on the phone and immediatly press CAMERA+POWER
YOU SHOULD SEE TRI-COLOR SCREEN displaying spl 77.7
This SPL is allowing you to flash latest radio
or to Flash any rom usin sspl 77.7
Run the update from the PC
VERY IMPORTANT
i found a way to installl hardspl
1. unplug phone from usb
2. take out the battery/put it back
3. enter bootloader (press camera+power)
4. check for spl if it sais 2.05 you can go further if not read the fisrt guide
5. enter in windows
6. extract and copy to device root http://rapidshare.com/files/138396463/breeze_HARDSPL.rar.html
7. copy to storage card root BREEIMG.NBH
8. it should say SPL-1.01
9. follow onscreen instruction for the update
10.enter in windows and delete BREEIMG.NBH from card
11.enter bootloader (press camera+power)
12.it should say spl 7.77
13.be happy now you have hardspl and you can flash any rom (without sspl)
BEST REGARDS
i don't know whats the problem with appunlocking... there are 5 Regkeys that have to be set,... it stands all in wiki
http://wiki.xda-developers.com/index.php?pagename=Breeze_Registry
Application Unlock
http://wiki.xda-developers.com/uploads/Policies.reg
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"00001017"=dword:00000090"00001005"=dword:00000028"00001001"=dword:00000001after doing this run SDAunlock app (google for it) or
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101b"=dword:00000001
Running unsigned Apps without confirmation!
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101a"=dword:1
GREATLY APPRECIATED! finally some good explainations. so let me get this straight,
SSPL = application unlock? (im asking this because i already have my phone app unlocked using SDA security unlock software)
i have a dopod 595 and,
my IPL is 0.90 (do i need to update this?)
SPL is 2.05 (so i need to use the SPL>1.09)
radio is 1.06.00.10 (do i need to update this?)
RIL is 2.002
do i need to update anything before i try your WM6.1? which is the latest versions (IPL,Radio) you would recommend and can you please provide the links too. also, will the forward facing video call camera work with your ROM?
from wiki, it looks like there is the Radio:1.38.00.10 Protocol:32.71.7020.12H RIL:2.002 SPL:1.10.0000 ROM, and other older Radio ROMs but with newer SPL. so in order to update my radio, do i need to flash the entire ROM into my phone, or can i just use a Radio ONLY rom updater?
Please bear with me, because i really do not want to brick my phone.
Admin, please make this thread sticky. cheers
alexnvidia said:
GREATLY APPRECIATED! finally some good explainations. so let me get this straight,
SSPL = application unlock? (im asking this because i already have my phone app unlocked using XDA unlock software)
i have a dopod 595 and,
my IPL is 0.90 (do i need to update this?)
SPL is 2.05 (so i need to use the SPL>1.09)
radio is 1.06.00.10 (do i need to update this?)
RIL is 2.002
do i need to update anything before i try your WM6.1? which is the latest versions (IPL,Radio) you would recommend and can you please provide the links too. also, will the forward facing video call camera work with your ROM?
from wiki, it looks like there is the Radio:1.38.00.10 Protocol:32.71.7020.12H RIL:2.002 SPL:1.10.0000 ROM, and other older Radio ROMs but with newer SPL. so in order to update my radio, do i need to flash the entire ROM into my phone, or can i just use a Radio ONLY rom updater?
Admin, please make this thread sticky. cheers
Click to expand...
Click to collapse
i had 2.05 spl
i flashed the 1.09 spl from first topic
i flashed the latest wwe rom
now i have 1.10 spl
radio 1.38 from oficial rom
app unlocked
sspl
flashed wm6.1
jerpelea said:
i had 2.05 spl
i flashed the 1.09 spl from first topic
i flashed the latest wwe rom
now i have 1.10 spl
radio 1.38 from oficial rom
app unlocked
sspl
flashed wm6.1
Click to expand...
Click to collapse
im going to flash to WWE now with this version : HTC MUI BREE100 1.34.251.1 1.38.00.10 32.71.7020.12H 15673.3.3.1 3.3.1 2.002 1.10.0000 , then update to your WM6.1.
am i doing the steps right?
OK, i've done all the steps you provided in post no.1 (great instructions by the way). problem, when i run SSPL on the root of the device, the screen close blank and nothing happens even though im still pressing the camera+power button. what should i do now?
OK, i've done all the steps you provided in post no.1 (great instructions by the way). problem, when i run SSPL on the root of the device, the screen goes blank and nothing happens even though im still pressing the camera+power button. i had to unplug the battery to restart the device. am i doing anything wrong here?
Update : Now i got it. i had to run the SPL link, not the SSPL.exe as written in the first post. must be a typo.
Update2 : Success!! flashed to WWE. now proceeding to your WM6.1!!
Update3 : Running WM6.1 B1 now! thanks jerpelea! you're the man!
Admins please make this thread sticky.
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, resgistry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
caglar_altan said:
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, resgistry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
Click to expand...
Click to collapse
all roms work
follow the guide and will work
rom
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
caglar_altan said:
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
Click to expand...
Click to collapse
Hi, I had the same issue. Try pressing camera & off' buttons AND Enter all together.
rom update
1- I have updated the current rom to origininal config by manufacturer's original ROM.
2- I applied HTC unlock tool..
3- My first attempt to update rom gave #262 error. Second attempt was succesful.
thanks.
futureshock said:
i don't know whats the problem with appunlocking... there are 5 Regkeys that have to be set,... it stands all in wiki
http://wiki.xda-developers.com/index.php?pagename=Breeze_Registry
Application Unlock
http://wiki.xda-developers.com/uploads/Policies.reg
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"00001017"=dword:00000090"00001005"=dword:00000028"00001001"=dword:00000001after doing this run SDAunlock app (google for it) or
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101b"=dword:00000001
Running unsigned Apps without confirmation!
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101a"=dword:1
Click to expand...
Click to collapse
there are 5 keys unless you have the official security configuration manager
that is setting the other keys for you
BR
HARDSPL
hy all
i found a way to flash hardspl to breeze
this will allow to flash any rom from any cid so that you will not break devices due to wrong cid
BR
is there anyway to hard spl without going into windows? my device is stuck at windows 2nd boot screen (windows mobile 5 logo)
jerpelea said:
hy all
i found a way to flash hardspl to breeze
this will allow to flash any rom from any cid so that you will not break devices due to wrong cid
BR
Click to expand...
Click to collapse
That sounds interesting..!
alexnvidia said:
is there anyway to hard spl without going into windows? my device is stuck at windows 2nd boot screen (windows mobile 5 logo)
Click to expand...
Click to collapse
no
you must get to windows
what is your current cid?
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
alexnvidia said:
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
Click to expand...
Click to collapse
you can not do anithing
your ipl does not know how to load spl1.09
send the phone to repair and flash hardspl when it returns
there are many people with your problem
till now we have found not found any solution
BR
my phone is out of warranty, so sending for repair will cost me a lot. we'lll keep our fingers crossed and hope you guys can find a solution for us soon. thank you
i think, SPL version is very confusing. 2.05 is older than 1.09?
Would be good to have compatibility list between SPL and IPL versions to not mess and brick device.
I guess i was lucky, because i updated my breeze to resently posted HardSPL (thanks to jerpelea) and device still alive.
I found that RUUUpdateUt.exe i've used for DES SoftSPL is not working with HardSPL anymore. It cost me a bunch of my nerves (no body mentioned this fact!). Again luckily i found that stock RUU upgrade utility works fine with HardSPL (i just removed all dialogs except first for convenient use).
Well, at last, now i don't need to flash stock firmware (with radio ROM update which is extremely dangerous) every time when one of my cooked ROM refuses to work normally.
Greetings all.
My Kjam G4 hangs on 2nd splash screen. After reading hundreds of posts over the last few days,
I am still not clear on my next step, without making phone any worse.
History.
Phone has HARD SPL.
ipl 2.21.0001
spl 2.21.olip
Used Molski wm6 rom last month or so. Flashed WizFlo 20273 v6.1.1.3 last week. Completed ok .But now hangs. Flashed wizard love and other roms via bootloader. completes ok. Still hangs on splash.
Hard rest results in "format is failed"
"r2sd all" completes ok. Pressing dial button does not start restore.
I have previous backup of different components using wst tool and also KJam official rom.
Questions:
1. With HARDSPL , is the phone CID unlocked ?
2. With the SD restore not working , does this imply phone still CID locked ?
3. Is there an official Kjam rom without ipl/spl ?
4. Hard reset is supposed to format "UA". Is it possible to flash a backup of UA (as made by wst )to the phone ?
Thanks in advance , and forgive me if I have not followed protocol this forum.
logank said:
Greetings all.
My Kjam G4 hangs on 2nd splash screen. After reading hundreds of posts over the last few days,
I am still not clear on my next step, without making phone any worse.
History.
Phone has HARD SPL.
ipl 2.21.0001
spl 2.21.olip
Used Molski wm6 rom last month or so. Flashed WizFlo 20273 v6.1.1.3 last week. Completed ok .But now hangs. Flashed wizard love and other roms via bootloader. completes ok. Still hangs on splash.
Hard rest results in "format is failed"
"r2sd all" completes ok. Pressing dial button does not start restore.
I have previous backup of different components using wst tool and also KJam official rom.
Questions:
1. With HARDSPL , is the phone CID unlocked ?
2. With the SD restore not working , does this imply phone still CID locked ?
3. Is there an official Kjam rom without ipl/spl ?
4. Hard reset is supposed to format "UA". Is it possible to flash a backup of UA (as made by wst )to the phone ?
Thanks in advance , and forgive me if I have not followed protocol this forum.
Click to expand...
Click to collapse
1.With HardSPL, Nopes! phone is not actually permanently CID unlocked like G3 device,Its semi-permanent CID unlocked by flashing patched IPL/SPL,thus tricking the Bootloaders in thinking its CID unlocked,whereas,its not actually CID unlocked.A G4 device can not be permanently CID unlocked (SuperCID),its just made to trick.
2. As the phone has HardSPL,Sdcard backup through mtty r2sd all command is not possible,coz the Bootloaders are patched,not original official.To carry out sdcard method,you'll have to first remove HardSPL,flash back the original official Bootloaders(IPL/SPL),only then its possible to perform sdcard method.
3. Nopes! there's no k-jam official rom without IPL/SPL,what you can do is to extract k-jam rom and remove the Bootloaders (IPL/SPL),repack the rom and can flash it,but without official IPL/SPL.The only way to flash the official k-jam rom is to first remove HardSPL,reflash original official k-jam Bootloaders and then flash official stock rom.
4.UA back up made by WST is again only possible to flash after removal of HardSPL.
5. Wizard_love or any other official rom with IPL/SPL in it will not flash,unless HardSPL is removed,infact,it might 'Brick' the phone,so avoid flashing any rom with IPL/SPL in it.
Try to flash any custom build wm6 or wm6.1 in Bootloaders and remove,if any, Sdcard inserted in the phone before flashing a rom and remember to have a fully charged battery before flashing.
BTW, send a PM to 'mestrini' the inventer of this magical tool WST_4.2.2,may be he can advise you better on this problem of 'Format is Failed'
zabardast_1 said:
1.With HardSPL, Nopes! phone is not actually permanently CID unlocked like G3 device,Its semi-permanent CID unlocked by flashing patched IPL/SPL,thus tricking the Bootloaders in thinking its CID unlocked,whereas,its not actually CID unlocked.A G4 device can not be permanently CID unlocked (SuperCID),its just made to trick.
2. As the phone has HardSPL,Sdcard backup through mtty r2sd all command is not possible,coz the Bootloaders are patched,not original official.To carry out sdcard method,you'll have to first remove HardSPL,flash back the original official Bootloaders(IPL/SPL),only then its possible to perform sdcard method.
3. Nopes! there's no k-jam official rom without IPL/SPL,what you can do is to extract k-jam rom and remove the Bootloaders (IPL/SPL),repack the rom and can flash it,but without official IPL/SPL.The only way to flash the official k-jam rom is to first remove HardSPL,reflash original official k-jam Bootloaders and then flash official stock rom.
4.UA back up made by WST is again only possible to flash after removal of HardSPL.
5. Wizard_love or any other official rom with IPL/SPL in it will not flash,unless HardSPL is removed,infact,it might 'Brick' the phone,so avoid flashing any rom with IPL/SPL in it.
Try to flash any custom build wm6 or wm6.1 in Bootloaders and remove,if any, Sdcard inserted in the phone before flashing a rom and remember to have a fully charged battery before flashing.
BTW, send a PM to 'mestrini' the inventer of this magical tool WST_4.2.2,may be he can advise you better on this problem of 'Format is Failed'
Click to expand...
Click to collapse
Thank you , zabardast_1 for your prompt and detailed response. I will PM "mestrini".
BTW, Is there any way to remove HardSPL without activesync ?
And thanks once again.
HARDSPL
How do i carry out HARDSPL on the phone which cannot boot becuase i am not able to connect using the microsft Activesync. Please assist my phone is a G4 and CID locked.
Hamid
Hi Everyone
My Kjam is also stuck on 2nd screen and i can not got any idea that how and what can I perform task to get its back original form. I read most of forums but still i am blank. please guide me what i do..........?
thanks in advance
Hi,
If your device is a G4 try this:
1- Download Wizard Love ROM.
2- Download ROMUpdate Utility V2.5.2 .
3- Try to enter to bootloader mode. The bootloader can be entered by holding the "Camera" button while resetting.
4- Copy the Wizard Love ROM's nk.'nbf' file to the ROMUpdate Utility V2.5.2 .
5- Run the 'romupdateutility.exe' and then follow the instructions of the application.
Best Regards.
Hi md_bluelily
Thanks buddy for your precious time.
1- Download Wizard Love ROM.
2- Download ROMUpdate Utility V2.5.2 .
Dear i try to find these, but there are lot of links i found
So please send me a suitable link of it. specialy Wizard Love Rom for IMATE KJAM G4 CID LOCKED DEVICE
thanks regards
Hamid
Here you can download Wizard Love ROM (G4 Only I think).
And here you can download ROMUpdate Utility V2.5.2 from attachment.
I was unable to get my PPC repaired myself so i took this paid favour from market with original and official WM5, details
IPL 2.26.0001
SPL 2.26.0001
OS 2.16.9.1
GSM 02.07.10
I was unable to use utilities and ROM provided by you cuz the PPC was not with me at that time. The guy who repaired my PPC said he was unable to install WM6 on my mobile. Now my mobile has following characteristics got using
Wizard Service Tool v4.2.2
29/09/09 18:59:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356xxxxxxxxxxxx
=> Bootloaders:
IPL: 2.26.0001 (G4 device)
SPL: 2.26.0001 (G4 device)
Built on Jun 7 2006 at 19:17:57
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.16
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: 2.16.9.101
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4ea09fda - 9.99M (0x9fd800)
8ea9e13a - 43.24M (0x2b3e000)
2fb25f92 - 50.95M (0x32f4000)
8fb25f3e - 2.94M (0x2f0000)
8fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000009b1c01023b3b03ccxxxxxxxx
Key Index: 60
All Done.