Related
Hi i am new to this site so hello peeps...
Anyway i have had my qtek 2020i for about 3 months now and apart from the odd reset (that i have done) its been a useful tool.
Now the other morning it decided to have a freak out and the start menus locked up. I tried to do another reset but nothinge changed..
Now my dilemma is....i performed a hard reset and now the screen will not align...it asks me to tap to set up my device and i start tapping the little crosses but it will not work..i seem to be tapping the crosses for ever with no luck. Can anybody help?
thanks in advance.
Sounds like "Take it back to the shop" time to me.
Something far wrong mate.
Danny-B- said:
Sounds like "Take it back to the shop" time to me.
Something far wrong mate.
Click to expand...
Click to collapse
spot on simple logic i suppose cheers geez
hehe, you could try a rom update or reflash, might be a problem with the rom
I got the new unit it was working fine......then i restored the backup that my last phone took before it went away and guess what....the problem returned :evil: .
Anyway i reflashed the rom with the qtek one and its sorted. :lol:
What is the best rom in your eyes for the alpine device?
The last O2 ROM with Pugs adaption, the 1.3 radio included.
Search for Pug it should come up with a link to his rom.
The newest O2 rom has an older radio version(1.0) because it has Blackberry support (which i will never use)
I am hardly recommend 1.04 radio version. It solved 3 issues for me and made my phone recieve signal better! This is "must have" version of radio!
Hi Guys!
(Sorry for my Bad English, but im German )
I have a really annoying Problem with my HTC TyTN II !!!
My Kaiser is always pluged to the Sync- or Charge-Cable on my Desk. It's also slided up, so i can see the Display all the time.
If there is a incomming Call and i'll slide down the Kaiser, the Call will be Canceled!!!
When i unplug it from the Charge- or Sync-Cable the Phone Call will also canceled!!
I've wrote a eMail to the HTC Support 4 weeks ago, but no answer till today...
Is there a Way to solve this issue?! Maybe a Registry Hack or something?!?
Thx alot!
Greetz,
infernalshade
with the slide problem that isnt a fault as far as im aware as it happens to me (I must admit that it is a bit annoying)
Uhm OK...
Then there is no way to fix it?
I just tried to reproduce these issues with my Tilt, and I could not.
When I slid open-and-up my Tilt and then called it, I was able to slide it closed and back to normal with my phone still ringing. I then repeated the steps with it plugged into USB, and still no problem.
Are you still running a stock (unmodified) ROM? I am running a cooked WM 6.1 ROM, and that could be the solution. I only have access to 1 Tilt, so I cannot test the symptoms with a WM6 ROM.
I have the Original ROM...and i think i don't want to cook my ROM...
Uhm...now i reproduced the Problem again and now it works
Strange!
But thx for help
I go skiing tomorrw so i need to try and get this problem fixed asap. I recently installed PDAcorner V19 and i adore the rom to bits. The only problem is randomly the sound will cut off. Calls are silent, txt messages/calls dont ring and adjusting the sound has no effect. It takes a soft reset in order to cure it, then after a few hours it goes back to being silent. I originally did a hard reset but it didnt seem to have any effect on it. I am on T-mobile, in the UK using radio 17.09.19.
Does anyone have any idea what could bec causing this? I pm'd the creater of this ROM but havnt heard back yet and i am really hoping to get it fixed before i go abroad. Does anyone have any advice?
thanks guys
(i have searched & googled as much as i can, but didnt find anything of use)
edit; excuse the typo in the subject, if i mod could adjust it id be gratefull!
You can try to flash a different radio to see if that helps or a different rom. I have that rom and do not think that anyone else is have those sorts of problems.
I had the same problem a while back and tried several different roms and radios. Nothing worked. I think it has to do with Voice Command and or bluetooth. Then all of a sudden it went away. Here is the thread discussing it, to see if it sounds like your problem.
http://forum.xda-developers.com/showthread.php?t=438457
thanks for your help Denco, ill have a look through and see if it helps!
Hey everyone,
My diamond, has been doing strange things ever since I flashed a new rom. Which was the (udK Syrius Topaz R6 21042) Rom. Yet I do not think it is the Rom.
The problem: When I start a call, I cannot hear my phone dialing, yet the call is still going through. Also when someone picks up, I cannot hear the other persons voice. I played around with this and when I put loud speaker on I could hear the other person speaking.
I flashed a whole bunch of new radios, yet still no prevail, then I flashed a new rom, ( Shaks.P v4.10) and the problem still remained.
The phone should not be broken and is fairly new (January)
I was on a Stock 1.93 rom with a flashed radio of 1.09.25.23 which worked nicely. Only until the new rom did things go wrong.
please help me out here..
Thanks
fighthall said:
Hey everyone,
My diamond, has been doing strange things ever since I flashed a new rom. Which was the (udK Syrius Topaz R6 21042) Rom. Yet I do not think it is the Rom.
The problem: When I start a call, I cannot hear my phone dialing, yet the call is still going through. Also when someone picks up, I cannot hear the other persons voice. I played around with this and when I put loud speaker on I could hear the other person speaking.
I flashed a whole bunch of new radios, yet still no prevail, then I flashed a new rom, ( Shaks.P v4.10) and the problem still remained.
The phone should not be broken and is fairly new (January)
I was on a Stock 1.93 rom with a flashed radio of 1.09.25.23 which worked nicely. Only until the new rom did things go wrong.
please help me out here..
Thanks
Click to expand...
Click to collapse
Not an new problem as you see here:
http://forum.xda-developers.com/showthread.php?t=496058
hmm... strange that the search didn't pick it up... Looks like there hasn't been much help there though.
Are you still having the problem? Or have you done something to fix it?
fighthall said:
hmm... strange that the search didn't pick it up... Looks like there hasn't been much help there though.
Are you still having the problem? Or have you done something to fix it?
Click to expand...
Click to collapse
no, I just called up HTC here in Germany, the even didn`t heard something about that problem. I think that the Speaker (Part No. 36H00684-00M) is defect.
So i will sent it up to the Service to that they can fix it.
I looked around and came across someone who dialed 150 then constantly turned the speaker on and off. After that I called out and it worked fine. Odd. Im sure it will come back though.
fighthall said:
I looked around and came across someone who dialed 150 then constantly turned the speaker on and off. After that I called out and it worked fine. Odd. Im sure it will come back though.
Click to expand...
Click to collapse
Sorry, but that sounds a bit strange to me.
Occassionally (more often than not) my keyboard, button keys and touch screen are unresponsive, where I need to hold down the key, or press it multiple times for it to register.
I tried searching but wasn't sure what keywords to search for. Has anyone else had this issue, or know where I can find the info to resolve it?
Thanks!
ROM? Hard-SPL?
Ultimate-X.V8.2G
How do I find the spl?
Also, I had an issue with my previous ROM version. I figured it was due to the ROM, but since I reproduced the problem on the new one now I'm not so sure. Any ideas?
axebox said:
Ultimate-X.V8.2G
How do I find the spl?
Also, I had an issue with my previous ROM version. I figured it was due to the ROM, but since I reproduced the problem on the new one now I'm not so sure. Any ideas?
Click to expand...
Click to collapse
Go into bootloader to find Hard-SPL i imagine you using 3.29 if you used the noob guide to flash and not upgraded since.
You can get into Bootloader by pressing camera button holding in for 2-3 sec and placing the stylus in the reset hole.
The way to find out if hardware would be to flash Stock ROM that is in the WIKI, if fine then may be worth updating to 3.34 then flashing custom ROM.
got the same problem. i think its an problem with my carrier. it seems, that my kaiser are trying to connect to an better antenna. those search tasks slow your kaiser down. you can try it by disabeling your cell phone function.
second to that, the carrier, i got the same problem, but just happend when the cell phone radio of my kaiser its on!!! i see this problem in a HP IPAQ 6XXX and in a TYTN 1 too, help plz its a horrible lag! i am tring to tweak some phone funtions with the registry, regards
Maybe should flash a new radio, check the wiki for 'how to'.
Or the ultimate radio thread. I also suggest everybody to read the wiki and the 'sticky's, sticky was set for a reason.
hey i got the 3.28.407.0 German Rom on my device. What is the best radio for it?