Help, phone stuck on splash screen - 8125, K-JAM, P4300, MDA Vario Software Upgrading

i installed a KJAM ROM there now and its just hanging at the splash screen
it says
IPL 2.21.0001
SPL 2.21.001
GSM 02.07.10
OS 2.16.9.1
how do i hard reset the phone? please, any help would be much appreciated

Related

o2 xda mini s frozen

just flashed my o2 xda mini s, everything seemed to go ok but now when i try to start my device, all it says is the following inf on startup screen.
ipl 2.21.0001
spl 2.21.001
gsm 02.07.10
os 10.1.0.011
is my device now bricked?
or can anyone help?
Did you follow the directions to flash a G4?
BBowermaster said:
Did you follow the directions to flash a G4?
Click to expand...
Click to collapse
where do i get this from, and does it really work
http://forum.xda-developers.com/showthread.php?t=293480
I did the same,
following the instructions, now it just sticks on the boot screen with:
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 2.18.0.0
A hard reset failed
Anyone able to help?
Sam

Vodafone VPA 2 frozen plz help

It frozen at the beginning of restart while only showing the version screen.
It happened after I did not finish flashing with shelltool.
Any ideas that I don't have to send this PDA back to manufacturer??
Thanks in advance!!!!!
IPL 2.21.001
SPL 2.21.001
OS 2.18.0.0
Try this
http://www.vodafone.de/downloadarea/RUU_Wizard_2210301_22103102_021911_VF-DE_Ship.exe
After flashing, flash your ROM with shelltool again.

help my wizard iz daing

i've to flash my wizard with german t-mobile rom, i flashed with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE evrething were ok and i've begin to flash with RUU_Vario_AKU3.3_3822_382120_026911_TMO_DE_GER_Ship.but nothing changed and now after flashing a new rom wizard loads CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE this rom and freezes. ipl 1.01 spl 2.21 what shall i do?
flash again dude!
didn't help) ipl 1.01 spl 3.08.0001
If it is still "ipl 1.01 spl 2.21", then flash Buttons 1.05 ROM and CID unlock your device.
If it is now "ipl 1.01 spl 3.08.0001", then you mixed G3 IPL and G4 SPL. It is a high possibility that you are going to brick it. Try to flash with your original stock ROM. If that doesn't help, then it is a brick.

IPL and SPL upgrade

Hallo People
i have followed the Tutorial here to remove the HardSPl
My GSM Information was
IPL 2.26.001
SPL 2.26.001
GSM 02.25.11
OS 11.0.0.1
after Following the Tutorial to remove the HardSPL
my GSM infomation become
IPL 2.17.001
SPL 2.17.001
GSM 02.25.11
OS 10.0.0.1
Pls any help would be appreciate
i wanna install the new HTC ROM for my Qtek 9100

cingular 8125 frozen

I have a cingular 8125, which he tried to change the language and damaged, no longer switches from the first picture, just shows me:
ipl 1.01
spl 2.25
gsm 01.12.10
os 1.5.4.2
the cells had WM6 now for more roms to try to get there is always the same, do not let me hard reset, and will not let me do a backup with mtty. Please help me to recover my 8125, thank you for now .......
I think that you tried to flash a not ''official'' rom that you found without CID/SIM unlock your phone .
If so start from reading this guide.-

Categories

Resources