I have a cingular 8125, which he tried to change the language and damaged, no longer switches from the first picture, just shows me:
ipl 1.01
spl 2.25
gsm 01.12.10
os 1.5.4.2
the cells had WM6 now for more roms to try to get there is always the same, do not let me hard reset, and will not let me do a backup with mtty. Please help me to recover my 8125, thank you for now .......
I think that you tried to flash a not ''official'' rom that you found without CID/SIM unlock your phone .
If so start from reading this guide.-
Related
i'm new to this so don't burn me
i just downgraded my 8125 to 1.08, i unlocked the sim/cid
then upgraded to cincular 2.26 aku2.3 by shogunmark, but the ipl is still 1.08???
so what am i doing worng?
thanks in advance !
IPL left out of rom
flashing the wrong ipl will brick a device eg. (ipl 2.26.0001 --->G3 device-->Brick)
the 2.26 cingular rom might not update your ipl try another rom like molski 30mb then reflash to 2.26 cingular rom ! post your findings
its not a g4, its a g3
its has been working since the upgrade, so would i be safe to load the latest rom by molski...thanks LMK
ok, upgrade to molski rom was success
is there a way to remove task manager from the bottom right and bring back the battery status, also are ther any skins to the dial pad. one more question can u customize the desktop like remove things i won't be using...thanks for all ur help!
I was using the Custom RUU Wizard 1050412 WWE 101 11210 WWE to downgrade my Cingular 8125 and after flashing the ROM information reads as follow on the boot screen
IPL: 1.01
SPL 2.26
GSM: 01.12.10
OS: 1.5.4.2
Why is the SPL still at 2.26?
shouldn't it go back down to 1.XX
DID I BRINK my fone??????? This is really pissing me off
You nice folks out there please help. I want to upgrade to the pdamobile 3.0 with crossbow icon ROM. Thanks
I wonder why there's a STICKY on top with READ FIRST.... Step 16 seems familiar too me.
Hi,
I read the sticky, unlock cid unlock reflash the rom to 1.XX twice and still the SPL is showing 2.26. Any other suggestion.
Run it twice and it will downgrade to the 1.xx on both ipl and spl. I did this yesterday. if your going up to the 3.3 eventually make sure you flash to a 2.XX before going full fledged 3.3. I thought I bricked my **** yesterday too, but luckily with the help of a few nice people on here, i got it worked out.
Hi,
I ran it 3 times with no luck. I don't know what I'm missing the IPL is at 1.01 but the SPL is still 2.26. Now when I ran Lokiwiz 2b for the Super CID unlock I get error message, file too big. Help. This is driving me nuts
try reflashing the 1.xx twice, then doing lokiwiz, are you using the right lokiwiz? I'm no pro, but maybe that will help?
and did you copy the enablerapi file?
which lokiwiz version u are using I used 2b and 3
I used 2b, did you copy enablerapi?
I'm having a bit of trouble CID Unlocking my US T-Mobile branded Wizard.
Rom: T-Mobile 2.26.10.2 WWE
Radio: 02.25.11
SPL: 2.26
IPL: 2.26
ExtROM: 2.26.10.105
I'm attempting to follow the "Stickied" guide posted by faria (http://forum.xda-developers.com/showthread.php?t=263116
), the same as posted by Dr. Puttingham (http://forum.xda-developers.com/showthread.php?t=285435). I get stuck trying to downgrade to Button's 1.05 ROM. I've tried several times with no success.
Each time, the progress bar will progress to 98% on the PC and the Wizard. Then the PC will move to 99% leaving the Wizard at 98%. Then the PC will move to 100%, and then eventually close the ROM updater application without displaying the final success message. The handheld stays at 98% until, after a few hours, the battery dies.
My goal is to install Faria's AKU3.3 ROM. It is my understanding that a CID Unlock is required to make that happen. Even so, I attempted to install it without first downgrading. The ROM installation seemed successful, however, when the device rebooted the same ROM seemed to be installed, only this time without the Extended ROM.
Any advice or alternate methods you can provide would be greatly appreciated.
wow...i have never encountered this problem on the forums before...hope someone has a solution....
sounds like you have a g4 and doing this may brick it can you please provide the correct ipl/pl info 2.26.00 G3 or 2.26.01 that would make it g4
You may want to try a different PC to flash it too in case it's a software malfunction in Windows.
man, first you gotta to downgrade the rom 2.26 from T-mobile to CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
after that you can CID unlock it.
Im having problems upgrading my qtek 9100 g3 pda to a new rom, specifically, the leaked wm6 wwe.
Currently:
IPL 1.01
SPL 2.17
GSM 02.25.11
OS 3.3.0.0
I have tried going straight to the wm6 rom but vista says the program has stopped responding. I have also tried reverting to buttons 1.05 ROM, with the same result.
Lastly, I tried reverting to the T-mobile 2.26 ROM, but this doesnt work either.
I am at a loss now, any suggestions would be greatly appreciated.
Thanks
From the sticky:
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
try doing it on a machine that isnt running Vista
I'm a newbie here. Please provide me the link or suitable Flash Rom for G3 Wizard O2 Mini S. My SPL/IPL is 1.03. I search for 1 day still cannot find it, thanks!
You wont find the ROMS itself anymore. Thanks to M$.
You can find a lot about good ROMs and customisations.
You should CID and SIM unlock your device, use the Wizard Service Tool for that
Then choose (WWE= English) and find the ROM you want (I use a modified official AKU 3.3, originally from T-Mobile Croatia)
Then Flash your device.
I just succesful install WM5 English version, and with IPL and SPL 3.08. I try with install many kind of WM6 but nothing happen, still remain WM5. What should I do?
My O2 mini S info:
IPL 3.08
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
ahdu said:
I just succesful install WM5 English version, and with IPL and SPL 3.08. I try with install many kind of WM6 but nothing happen, still remain WM5. What should I do?
My O2 mini S info:
IPL 3.08
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Click to expand...
Click to collapse
It is likely that you did not CID unlock the device. Just look at the second post and the stickies in this forum.
kernelguy