Database Develop

missed upgrade

I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance

sailors_be said:
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
Click to expand...
Click to collapse
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292

More info required.
When having problems with Rom Upgrades you really need to provide as much information as possible about your situation.
Please state the following:
What Rom did you have prior to upgrading, include IPL/SPL numbers.
Do you know if your device is G3 or G4 flash chip?
Is your device CID Unlocked?
Have your read (thoroughly) the instructions provided for the Rom you attempted to upgrade?
My initial guess would be that the Rom you flashed doesn't include IPL/SPL (as Risidoro clearly states in the Original Post (http://forum.xda-developers.com/showthread.php?t=276700)
In this case, you need to flash one of the Operator provided AKU 2.x Roms to get your IPL/SPL up to 2.x BEFORE you flash Risidoro's Rom to your device.

Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.

I'm going to give you some general info but you will have to do your own leg work to put this together.
The Wizard Wiki will contain some of the information you need:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see the stickied posts at the beginning of the Wizard upgrading forum.
I am assuming that your device is not properly CID Unlocked (although it may be doing it again will not harm your device).
First you will need to download an Operator Rom, I would suggest this one:
ftp://xda:[email protected]_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
as it is an official Qtek AKU 1.x Rom.
Second place your Device into Bootloader Mode (search on it) and run the update that you downloaded.
At this point you are pretty close to where you were when you started.
Now, CID Unlock your Phone! Use this thread:
http://forum.xda-developers.com/showthread.php?t=249474
If you have followed the instructions and everything went okay then you can now flash any of the Roms you (except one that are marked as G4 only since you appear to have a G3 Device).

sailors_be said:
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
Click to expand...
Click to collapse
Looks like you flashed a 2.xx rom with no bootloader into a 1.xx system.
First try a full 2.xx rom from a carrier (cingular 2.25 comes to mind) then reflash the rom you want. Be careful playing with the phone in the current state as the battery will drain and not re-charge. I had to have a friend charge my battery for me when I did this same thing.

many thanks
I followed the procedure you give and recuperated my phone.
Thanks a lot for the assistance.
Merry christmas and happy new year
Jean-Michel

Some help please

I am pulling my hair out here...
I have an 8125, with the following
Sim Carrier and Rom = T-Mobile
IPL/SPL=3.08
GSM=01.12.10
OS=1.5.4.2
Rom Version=1.5.4.2 WWE
Radio Version 01.12.10
I followed the two main tutorials on how to SIM and CID unlock, got both my IPL and SPL to match, flashed in the TMo Rom and thought all was good.
Now I was poking around and see that it is not a 2.26 rom that is on there but it is a 1.5.4.2. So what do I do, I go to
http://www.t-mobile.com/wmupgrade/
to get the Mobile MDA Software Version (2.26.10.2)
and when I run the file that gets downloaded, it gives me a
ERROR [296] : UPGRADE ONLY
Now, does it see that the phone is infact not an MDA and is a 8125 and does not like it?
So now from this point, (I have done my research and forum search, and RTFM many times so pleae dont blast me) what do I need to do to get the updated 2.26 rom, and eventually get up to the WM6.
I appreciate all the help, as I am seriously ready to have phone meet wall.

177media said:
I am pulling my hair out here...
I have an 8125, with the following
Sim Carrier and Rom = T-Mobile
IPL/SPL=3.08
GSM=01.12.10
OS=1.5.4.2
Rom Version=1.5.4.2 WWE
Radio Version 01.12.10
I followed the two main tutorials on how to SIM and CID unlock, got both my IPL and SPL to match, flashed in the TMo Rom and thought all was good.
Now I was poking around and see that it is not a 2.26 rom that is on there but it is a 1.5.4.2. So what do I do, I go to
http://www.t-mobile.com/wmupgrade/
to get the Mobile MDA Software Version (2.26.10.2)
and when I run the file that gets downloaded, it gives me a
ERROR [296] : UPGRADE ONLY
Now, does it see that the phone is infact not an MDA and is a 8125 and does not like it?
So now from this point, (I have done my research and forum search, and RTFM many times so pleae dont blast me) what do I need to do to get the updated 2.26 rom, and eventually get up to the WM6.
I appreciate all the help, as I am seriously ready to have phone meet wall.
Click to expand...
Click to collapse
You have already flashed newer bootloaders that 2.26. You have 3.08. Why do you need to go back to 2.26? IF you are CID unlocked (did you take your bootloaders down to 1.xx then run lokiwiz, and then bring them up to 3.08?) you should be able to flash your WM6 rom now. Have you tried?

Zzan said:
You have already flashed newer bootloaders that 2.26. You have 3.08. Why do you need to go back to 2.26? IF you are CID unlocked (did you take your bootloaders down to 1.xx then run lokiwiz, and then bring them up to 3.08?) you should be able to flash your WM6 rom now. Have you tried?
Click to expand...
Click to collapse
I think he upgraded the IPL/SPL alone from button's 1.01 and now can't flash any ROM since 3.08 can't handle 1.5 OS.
My advise is to flash IPL/SPL 1.01 and from there flash a 2.26 but... there are a lot of people mentioning IPL 3.08 and SPL 1.xx meaning that IPL won't allow to downgrade. I think it's up to him...

my understanding is that you shouldn't be going to an ipl/spl of 3.xx unless you are flashing from an ipl/spl of 2.xx. (based on thread information from old roms of molski and faria, last days of wm5 roms).
if possible, you should try to reflash back to 1.05 (i think they were customized so you shouldn't have problems).
official t-mobile roms won't let you downgrade to my understanding...at least not from one official t-mobile to another official (3.08 --> 2.26 or 2.26 -->1.80).
so...retry to flash buttons 1.05, then move up to 2.26...and then if you really want to flash again to 3.08.

That is exactly what I figured out last night.
When I RTFM where it says EDIT STEP 17: Flash to 3.08 .......
I took that as a instad of thinking that it contained the 2.16 rom as well as the IPL/SPL upgrades.
So I went through reflashed both back down to buttons 1.05 and then reflashed back up to 2.26 and then to WM6, everything is dandy and it is all becuase of the wonderful people here. I can not say it enough. This place is the greatest! And thank you all yet again.

I'm glad you managed to save your phone. Not many these days by counting the number of "Help" threads
Can i ask you to please give something back to the forum? please check my signature and visit the "Data crashes" solution thread. Tx

Definitly will.

Downgrade Locked G3 with 3.08 IPL/SPL

I have read the guides to unlocking and from what I see there are none that work on 3.xx SPL/IPL. I was able to downgrade the IPL but never the SPL.
I have seen several threads that say if you flash button rom (several times) it will eventually downgrade the SPL also, but all night as I worked I flashed the button ROM (about 12-15 times) and still can't downgrade the SPL from the 3.08, only IPL goes to 1.01
Tried the original Cingular ROM and it isn't accepted (I think because I have a higher SPL than the original 2.26), tried using the ShellTool, Tried SoftSPL too but none worked.
IS THERE A WAY TO DOWNGRADE THE 3.08 SPL SO THAT I CAN USE THE LOKIWIZ02 OR LOKIWIZ03. I saw a thred saying that 3.08 can't be downloaded but I also saw SEVERAL saying to just keep insisting with the Button rom that it will eventually work (but after almost 15 consecutive tries I've had it).
Any help would be GREAT.
thanks
MGF
IPL 1.01
SPL 3.08
GSM 1.12.10
OS 1.5.4.2

Button ROM doesn't work for that. I tried numerous times too. The only ROMs that work to downgrade to anything else from 3.08 are the OEM releases from either T-Mo or AT&T.
The Cingular ROM isn't accepted because it checks the OS version number. I had to try several peoples' ROMs until I found one with a low enough version number to where the Cingular ROm could flash on top of it.

Try to flash T-Mobile 2.26 to bring it down to ipl/spl 2,26 then go for button's 1.05,hope it'll do the trick.
Good luck
p.s. you can try the wizard_love_Rom also,lol

I want to downgrade my phone, too. but the original T-Mobile AKU2.0 say while reading the phones ROM-Version "only update"... so, with this no downgrade is possible.
How can i CID unlock with AKU3? I want to flash a new ROM from xda-developer as well... damn
Regards
Thomas

You could probably extract the nk.nbf and use the standard tools to flash it.
The nk.nbf can usually be found in a .tmp folder in c:\documents and settings\yourname\Local Settings\Temp

Thanx for your Hint... but which "Standard-Tool" should i use?
Sorry for this silly question, but i am new in experience with my vario

imate kjam
hello, i am new enterent on this forum and need help for, have imate kjam G3 IPL/SPL 1.xx os 1.1.9.3 device and i want to upgrade with latest WM 5 SE 3.8.2.1. Can i upgrade this OS without facing any prb i.e CID/sim locked prb??? kindly adivice to me what is the right way to upgrade my imate kjam (t-mobile) thank you.
best regards
farry

Unless you are using official kjam update, otherwise please CID unlock your G3 device first, or you will face problems.

thank u for advice, but how to CID unlock first before upgrade the rom, any tool for apply to unlock?? plz help
regards
farry

ROM upgrade problems please help!

Hi, Ive looked around the forum and cannot find a solution to my problem. Ok, step by step here is what I did: I used the button 1.05 custom ROM, this was installed successfully. Then I used the definitive guide to unlocking the G3 wizard using the lokiwiz tool and this was successful as far as I know. I then upgraded to the t - mobile 3.08 ROM as this was recommended before upgrading to a WM6 ROM. This is where the problems began. I tried to flash Faria's WM6 crossbow rom and partway through the flash it hung and got stuck in bootloader mode. I read around the forums and tried to downgrade back to button 1.05, the tmobile 3.08 rom, and also the cingular 2.25 rom. The furthest I got was about 49% on the progress when my phone returns to the bootloader screen. My phone always seems to do one of two things: I either get a communication error "with my pc" which starts the recovery process(which never actually works) or I get error 274 which says that I am no longer connected to my pc (even though it still says "usb" on the screen of my pocket pc. I know that my battery will soon run out and I will have to buy a new one to resume trying to get my phone to work again. I ve also uninstalled active sync, re- down loaded and installed it, rebooted my computer (as was suggested) and this didnt work. Some one please help me as I am pretty new at this and cannot find this exact issue on the forums. Any help will be greatly appreciated!!!

Try to flash on another PC.

Ok I've tried to flash it on 3 different PCs and I havent been able to make it work, any other suggestions?

You have misread and misunderstood the definitive guide.You are confusing T-mobile 2.26 and IPL/SPL 3.08,its T-mobile 2.26 and not T-mobile 3.08. T-mobile 2.26 is a Rom ,an OS (Operating System) and IPL/SPL 3.08 are the latest upgrades to Bootloaders and not a rom.
Now,after downgrading with Button's Rom 1.05,your phone's IPL/SPL must have been 1.05,then you applied lokiwiz02b to SIM/CID unlock the phone,but ipl/spl must have remained 1.05 as you had Button's Rom 1.05 installed on your phone.
In order to upgrade to wm6,its required to have IPL/SPL 2.xx,so you were supposed to flash T-mobile 2.26 to get your IPL/SPL 2.26,but,instead of flashing t-mobile 2.26,you flashed IPL/SPL 3.08,so you have now IPL/SPL 3.08,correct ?
IPL/SPL 3.08 is an option to upgrade your IPL/SPL (Bootloaders) but upgrading to T-mobile 2.26 is recommended,so that you get IPL/SPL 2.xx to upgrade to wm6.There's your mistake,got my point ?
So,now try to downgrade to ipl/spl 2.xx or 1.xx,to do so,download the official carrier's rom of your phone from it's website and flash to get back to its original default status.
After that reread the guide correctly and follow the method.
Good luck

Thanks for your help, I'll try that and let you know how it turns out.

OK i downloaded the official cingular ROM 2.25 and attempted to flash it. I got about 76% done and got a communication error. I've tried to do it several times since then with no luck. However, my ipl and spl did change to 2.25. What should I do now?

Anybody have any suggestions? I'm dying here guys I would really appreciate some help, thanks

ok,get into Bootloaders (tricolor screen)check usb appear at the bottom of bootloaders,,try to get down to ipl/spl 1.xx,first try with button's rom,if it works,fine,otherwise try xda_minis_launch rom or wizard_love rom,if any of them installs,download WST tool and check the status of your phone by hitting the 'CID Action' button.It'll verify if your phone is locked or unlocked,ok,if unlocked then flash t_mobile 2.26 and if locked,run the lokiwiz02b again to unlock.
while flashing,turn off any antivirus,firewall and don't surf the net,check email or play any games.Leave the phone and pc alone.Must have a fully charged battery.Delete partnership with activesync and uncheck 'Allow usb connection' in the activesync,it helps sometimes.Try with a different usb cable or plugin usb cable in other usb input slot of the pc.I do hope,it might do the trick and work out fine.
Good luck

Is this normal?

I'm sorry if this a repost or not, but i'm currently following the Upgrade procedure for windows mobile 6, and it required me to downgrade to the button rom. Everything went smooth, but i wonder. The guy in the tourital says that my IPL and SPL is one on 1.xx and another on 2.xx, as mine is both at 1.xx. i have the T-mobile MDA version, and I'm following the G3 tourital. Currently now it's just sitting there, should i continue without worry or do i need to do it over again to get one at 1.xx/2.xx. Thanks for the support
Harlan.

No - if both your ipl/spl is at 1.xx - then you are good to go, continue on to the next step.
It appears that some users (such as myself ) have to run the buttom rom twice to get both ipl/spl to be the same.
My first pass with the button rom gave me ipl of 1.xx -and spl of 2.xx
Ran the button rom a second time - and all was good
Good luck

Remember to CID unlock, then Upgrade IPL/SPL before upgrading to WM6.

Read the guide carefully,it says, the while downgrading with Button's Rom you might probably get ipl 1.xx and spl 2.xx,reflash the button's rom a few times more till you get both ipl/spl 1.xx.Its required to have both ipl/spl 1.xx to apply lokiwiz02b to SIM/CID unlock the phone,so as you already got ipl/spl 1.xx,you are lucky and good to go to run lokiwiz02b and unlock,remember only after unlocking the phone,upgrade to ipl/spl 2.xx by flashing T-mobile 2.26,ok
cheers !

Thanks
Thanks you Guys, it Successfully installed with breeze. Now that i upgraded the rom by installing the 2.26 before WM6, I'm getting 200% better reception, like it would take an hour or more Just to get reception ANYWHERE!!!!, I'm not kidding. Now that i finished up and installed the black diamond WM6, as soon i hit the today screen, I'm already connected to t-mobile. Thank you everybody for telling me that I'm safe on continuing the installer with both 1.xx ipl/spl, because now i have better reception, touch, unlocked, MDA. Thanks xda-developers for the great information.
Harlan.