Database Develop

FAIL upgrade to WM6 with IPL/SPL 3.08. T_T Pls HELP

I'm a newbie here. Please provide me the link or suitable Flash Rom for G3 Wizard O2 Mini S. My SPL/IPL is 1.03. I search for 1 day still cannot find it, thanks!

You wont find the ROMS itself anymore. Thanks to M$.
You can find a lot about good ROMs and customisations.
You should CID and SIM unlock your device, use the Wizard Service Tool for that
Then choose (WWE= English) and find the ROM you want (I use a modified official AKU 3.3, originally from T-Mobile Croatia)
Then Flash your device.

I just succesful install WM5 English version, and with IPL and SPL 3.08. I try with install many kind of WM6 but nothing happen, still remain WM5. What should I do?
My O2 mini S info:
IPL 3.08
SPL 3.08
GSM 01.12.10
OS 1.5.4.2

ahdu said:
I just succesful install WM5 English version, and with IPL and SPL 3.08. I try with install many kind of WM6 but nothing happen, still remain WM5. What should I do?
My O2 mini S info:
IPL 3.08
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Click to expand...
Click to collapse
It is likely that you did not CID unlock the device. Just look at the second post and the stickies in this forum.
kernelguy

Wizard Freeze On Bootloader. Help Plz.!

Hi mates. i was using TNT WM 6.1 Rom. and now i tried to upgrade my device to TNT 6.1 v2. but my wizard stucked at bootloader after successful upgrae.
i have ipl 3.08 and spl 3.08. then i installed the Button rom. and with that my IPL goes to 1.01 and spl 3.08 but the button rom also stucked at bootloader after successful upgrade. this was happening first time.
so kindly help me with this situation. or if there is any other rescue rom. then plz send me link.
now my wizard always stuck at bootloader screen.
Regards

You can't go from 3.xx to 1.xx bootloaders
try to restore 3.xx

i have restored the IPL to 3.08 and SPL to 3.08 but still it freezes on the bootloader window where it displays the ipl spl gsm and os info.
what i will do now. to rescue my device. actually i want to enable rapi services. but wizard service tool is not working in bootloader mode. and the device is freezed at the info screen. so any other possibility to enable rapi. so i will reflash with shell tool.?

If the CID is already unlocked then follow drugstore's thread with the mtty solution

bro the CID is not already unlocked. i flashed many times with wizard love rom / button rom / & Xdaminiis rom. but all i got is only ipl changed to 1.01 but the spl remains 3.08 so i need to downgrade the spl as well. please help..
Thanks.

im in the same situation. ipl 1.XX.... and spl 3.08 ... its a wizard G4 ... and stuck on green info screen or bootloader. help !

upgrade radio only

Hi. I just got my Wizard and would like to upgrade just the radio rom. i looked trough the forum but i cannot find the answer. if there is a howto forgive me for asking again.
i bought the Wizard second hand so the gaurentee is not a problem.
thanks in advance
IPL: 2.16 (G3 device)
SPL: 2.16 (G3 device)
Radio: 02.07.1ò

kimb0 said:
Hi. I just got my Wizard and would like to upgrade just the radio rom. i looked trough the forum but i cannot find the answer. if there is a howto forgive me for asking again.
i bought the Wizard second hand so the gaurentee is not a problem.
thanks in advance
IPL: 2.16 (G3 device)
SPL: 2.16 (G3 device)
Radio: 02.07.1ò
Click to expand...
Click to collapse
Flashing and upgrading a Radio Rom is not much of a difficulty,just download the Radio Rom of your choice,attach the phone with pc via usb cable and run the RUU application in the Radio Rom,it hardly takes one minute or two to get flashed and complete.Check out the Radio Roms in the forum of your choice or read the 'wiki'
Cheers!

thank you

Ok i ran the RUU and it all runs nice up to the page were is states the old version you have on and that it will upgrade to the following, there it is just blank. i have read the readme and i still can not find the problem. can it be that my Wizard is stil CID Locked?
kimb0

kimb0 said:
Ok i ran the RUU and it all runs nice up to the page were is states the old version you have on and that it will upgrade to the following, there it is just blank. i have read the readme and i still can not find the problem. can it be that my Wizard is stil CID Locked?
kimb0
Click to expand...
Click to collapse
Flashing or upgrading just Radio Rom doesn't require CID unlock,Its not an OS,it doesn't include any IPL/SPL in it,it just upgrades the GSM of the phone,which is not integral part of any Rom (OS)
Yes ! sometimes the upgrade utility do not show the details of the Rom its flashing,it doesn't matter,just click for upgrade,it'll start the process.
Cheers!

Problem

OK all, I am new to this, I used the hard SPL-G4 to unlock (worked fine), then used rom update 2.5.2 to update my 8125 to SNN Diamond Edition WM 6.1 build 19209. When I boot, I get the spash screen then I get the three color screen and nothing...Did I just Brick this thing or am I missing a step here? Sorry for the stupidity...
Bryan

Phone booting into Bootloaders (tricolor screen) means its still working and not bricked.
Maybe the flash didn't go well and its a bad flash,try to flash again or it cud be that HardSPL cudn't get applied properly.What IPL/SPL it displays in Bootloaders ?

Shows IPL 2.21.001/SPL 2.25.001. Just hangs at the tri-color screen. With it in this mode how would I flash it again?

bboretsky said:
Shows IPL 2.21.001/SPL 2.25.001. Just hangs at the tri-color screen. With it in this mode how would I flash it again?
Click to expand...
Click to collapse
Is it ipl 2.21.001 or 2.21.0001 & spl 2.25.0001,note the 3 0's.
If there are only 2 0's then its a G4 device,you shudn't apply hardSPL but if there are 3 0's than HardSPL didn't get applied correctly,reflash the HardSPL.After the HardSPL the IPL shud look like 2.210001 & Spl 2.21 olip.

It is a G4 model
IPL 2.21.0001
and
SPL 2.25.0001
per the WIKI if I have the three '0' then it is a G4
Anyways, I tried conning via the usb to run the slftSPL but it cannot find the device. How do I proceed?
thanks.

Help me(spl2.25 became 2.25.0001)

My phone is cingular 8125(g3)
i have a mistake and apdate rom with at&t nk.nbf(771 kb g4)
now my phone stay in three color and spl2.25 became 2.25.0001
my phone was not apdate with origianal rom cigular 8125
before
ipl 1.01
spl 2.25
now
ipl 1.01
spl 2.25.0001

I'm 99% sure you bricked your phone....There's a reason all the stickies say "Read This First".....You have a G3 wizard and you flashed it with a G4 ROM....good luck unbricking your phone.

Somebody here Please tell what soft to use with JTAG to recover da bootloader!