My phone is cingular 8125(g3)
i have a mistake and apdate rom with at&t nk.nbf(771 kb g4)
now my phone stay in three color and spl2.25 became 2.25.0001
my phone was not apdate with origianal rom cigular 8125
before
ipl 1.01
spl 2.25
now
ipl 1.01
spl 2.25.0001
I'm 99% sure you bricked your phone....There's a reason all the stickies say "Read This First".....You have a G3 wizard and you flashed it with a G4 ROM....good luck unbricking your phone.
Somebody here Please tell what soft to use with JTAG to recover da bootloader!
Related
I was using the Custom RUU Wizard 1050412 WWE 101 11210 WWE to downgrade my Cingular 8125 and after flashing the ROM information reads as follow on the boot screen
IPL: 1.01
SPL 2.26
GSM: 01.12.10
OS: 1.5.4.2
Why is the SPL still at 2.26?
shouldn't it go back down to 1.XX
DID I BRINK my fone??????? This is really pissing me off
You nice folks out there please help. I want to upgrade to the pdamobile 3.0 with crossbow icon ROM. Thanks
I wonder why there's a STICKY on top with READ FIRST.... Step 16 seems familiar too me.
Hi,
I read the sticky, unlock cid unlock reflash the rom to 1.XX twice and still the SPL is showing 2.26. Any other suggestion.
Run it twice and it will downgrade to the 1.xx on both ipl and spl. I did this yesterday. if your going up to the 3.3 eventually make sure you flash to a 2.XX before going full fledged 3.3. I thought I bricked my **** yesterday too, but luckily with the help of a few nice people on here, i got it worked out.
Hi,
I ran it 3 times with no luck. I don't know what I'm missing the IPL is at 1.01 but the SPL is still 2.26. Now when I ran Lokiwiz 2b for the Super CID unlock I get error message, file too big. Help. This is driving me nuts
try reflashing the 1.xx twice, then doing lokiwiz, are you using the right lokiwiz? I'm no pro, but maybe that will help?
and did you copy the enablerapi file?
which lokiwiz version u are using I used 2b and 3
I used 2b, did you copy enablerapi?
i've to flash my wizard with german t-mobile rom, i flashed with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE evrething were ok and i've begin to flash with RUU_Vario_AKU3.3_3822_382120_026911_TMO_DE_GER_Ship.but nothing changed and now after flashing a new rom wizard loads CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE this rom and freezes. ipl 1.01 spl 2.21 what shall i do?
flash again dude!
didn't help) ipl 1.01 spl 3.08.0001
If it is still "ipl 1.01 spl 2.21", then flash Buttons 1.05 ROM and CID unlock your device.
If it is now "ipl 1.01 spl 3.08.0001", then you mixed G3 IPL and G4 SPL. It is a high possibility that you are going to brick it. Try to flash with your original stock ROM. If that doesn't help, then it is a brick.
Hi mates. i was using TNT WM 6.1 Rom. and now i tried to upgrade my device to TNT 6.1 v2. but my wizard stucked at bootloader after successful upgrae.
i have ipl 3.08 and spl 3.08. then i installed the Button rom. and with that my IPL goes to 1.01 and spl 3.08 but the button rom also stucked at bootloader after successful upgrade. this was happening first time.
so kindly help me with this situation. or if there is any other rescue rom. then plz send me link.
now my wizard always stuck at bootloader screen.
Regards
You can't go from 3.xx to 1.xx bootloaders
try to restore 3.xx
i have restored the IPL to 3.08 and SPL to 3.08 but still it freezes on the bootloader window where it displays the ipl spl gsm and os info.
what i will do now. to rescue my device. actually i want to enable rapi services. but wizard service tool is not working in bootloader mode. and the device is freezed at the info screen. so any other possibility to enable rapi. so i will reflash with shell tool.?
If the CID is already unlocked then follow drugstore's thread with the mtty solution
bro the CID is not already unlocked. i flashed many times with wizard love rom / button rom / & Xdaminiis rom. but all i got is only ipl changed to 1.01 but the spl remains 3.08 so i need to downgrade the spl as well. please help..
Thanks.
im in the same situation. ipl 1.XX.... and spl 3.08 ... its a wizard G4 ... and stuck on green info screen or bootloader. help !
OK all, I am new to this, I used the hard SPL-G4 to unlock (worked fine), then used rom update 2.5.2 to update my 8125 to SNN Diamond Edition WM 6.1 build 19209. When I boot, I get the spash screen then I get the three color screen and nothing...Did I just Brick this thing or am I missing a step here? Sorry for the stupidity...
Bryan
Phone booting into Bootloaders (tricolor screen) means its still working and not bricked.
Maybe the flash didn't go well and its a bad flash,try to flash again or it cud be that HardSPL cudn't get applied properly.What IPL/SPL it displays in Bootloaders ?
Shows IPL 2.21.001/SPL 2.25.001. Just hangs at the tri-color screen. With it in this mode how would I flash it again?
bboretsky said:
Shows IPL 2.21.001/SPL 2.25.001. Just hangs at the tri-color screen. With it in this mode how would I flash it again?
Click to expand...
Click to collapse
Is it ipl 2.21.001 or 2.21.0001 & spl 2.25.0001,note the 3 0's.
If there are only 2 0's then its a G4 device,you shudn't apply hardSPL but if there are 3 0's than HardSPL didn't get applied correctly,reflash the HardSPL.After the HardSPL the IPL shud look like 2.210001 & Spl 2.21 olip.
It is a G4 model
IPL 2.21.0001
and
SPL 2.25.0001
per the WIKI if I have the three '0' then it is a G4
Anyways, I tried conning via the usb to run the slftSPL but it cannot find the device. How do I proceed?
thanks.
I have a cingular 8125, which he tried to change the language and damaged, no longer switches from the first picture, just shows me:
ipl 1.01
spl 2.25
gsm 01.12.10
os 1.5.4.2
the cells had WM6 now for more roms to try to get there is always the same, do not let me hard reset, and will not let me do a backup with mtty. Please help me to recover my 8125, thank you for now .......
I think that you tried to flash a not ''official'' rom that you found without CID/SIM unlock your phone .
If so start from reading this guide.-