upgrade radio only - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi. I just got my Wizard and would like to upgrade just the radio rom. i looked trough the forum but i cannot find the answer. if there is a howto forgive me for asking again.
i bought the Wizard second hand so the gaurentee is not a problem.
thanks in advance
IPL: 2.16 (G3 device)
SPL: 2.16 (G3 device)
Radio: 02.07.1ò

kimb0 said:
Hi. I just got my Wizard and would like to upgrade just the radio rom. i looked trough the forum but i cannot find the answer. if there is a howto forgive me for asking again.
i bought the Wizard second hand so the gaurentee is not a problem.
thanks in advance
IPL: 2.16 (G3 device)
SPL: 2.16 (G3 device)
Radio: 02.07.1ò
Click to expand...
Click to collapse
Flashing and upgrading a Radio Rom is not much of a difficulty,just download the Radio Rom of your choice,attach the phone with pc via usb cable and run the RUU application in the Radio Rom,it hardly takes one minute or two to get flashed and complete.Check out the Radio Roms in the forum of your choice or read the 'wiki'
Cheers!

thank you

Ok i ran the RUU and it all runs nice up to the page were is states the old version you have on and that it will upgrade to the following, there it is just blank. i have read the readme and i still can not find the problem. can it be that my Wizard is stil CID Locked?
kimb0

kimb0 said:
Ok i ran the RUU and it all runs nice up to the page were is states the old version you have on and that it will upgrade to the following, there it is just blank. i have read the readme and i still can not find the problem. can it be that my Wizard is stil CID Locked?
kimb0
Click to expand...
Click to collapse
Flashing or upgrading just Radio Rom doesn't require CID unlock,Its not an OS,it doesn't include any IPL/SPL in it,it just upgrades the GSM of the phone,which is not integral part of any Rom (OS)
Yes ! sometimes the upgrade utility do not show the details of the Rom its flashing,it doesn't matter,just click for upgrade,it'll start the process.
Cheers!

Related

Downgradeing HTC Wizard

Hi,
I've installed the latest AKU 3.2 Version on my Wizard.
Now i've wanted to downgrade to AKU 2.0 (with the original Loader Provided from "Vario_AKU2.0_05-2006.exe") and the tool tells me it is not possible. Is there a way to make it run?
Thanks a lot
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Nobody warns ??????????????????????????
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
mforce said:
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Click to expand...
Click to collapse
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Dr Puttingham said:
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
Click to expand...
Click to collapse
Already tried that, not working.. btw wise gramma
vseehua said:
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Click to expand...
Click to collapse
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Possible solution
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
mforce said:
Already tried that, not working.. btw wise gramma
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Click to expand...
Click to collapse
If you have a G3 device you can downgrade your IPL/SPL. I've done it my Cingular 8125 and it's 3 replacement PDA's numerous times. In addition I've downgraded at least 20 phones to 1.05 so's I could unlock and then upgrade. And then done it again. If you follow faria's instructions that is.... Now I HAVE had to flash the 1.05 twice to get the SPL down to 1.05. Humor us huh?
Note: I realize that Faria says that it doesn't work above 2.21 but I have performed this procedure on at least a dozen "out of the box" Cingular 2.25's. Downgrade to 1.05. Extract lokiwiz to the root of your C drive. Copy enablerapi.cab to your device (I know that you've unlocked your device, just indulge me please ) Execute enablerapi.cab from your PDA. get to a Dos prompt and run lokiwiz from the C prompt. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Dr Puttingham said:
If you have a G3 device you can downgrade your IPL/SPL. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Click to expand...
Click to collapse
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
A2Z said:
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Click to expand...
Click to collapse
Great! it works
stefan1975 said:
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
Click to expand...
Click to collapse
This one.. (flash it 2 times!)
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Seppl82 said:
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
Click to expand...
Click to collapse
Does NOT work, thnx anyway
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Downgrading/Upgrading
Dr P. or anyone else,
I've seen "somewhere on this board" a description of how to flash "any rom" without having to downgrade to 1.05, it stated to change the .exe file to a .rar and then change the ruu file to one that is not looking for the current phone status. I've tried that and have not had success in doing so. IF there is infact a way to do this, could someone please provide a blow by blow scenario to accomplish it?
Thanks,
vpu2
HighVoltage said:
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Click to expand...
Click to collapse
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Dr Puttingham said:
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Click to expand...
Click to collapse
Hi Guys,
I tried everything but it doesn't help das anyone had another option?
Thanks
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Dr Puttingham said:
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Click to expand...
Click to collapse
I tried everything what everybody said in this post.
Mr hokkie, please humble me and document exactly what device you own and your exact IPL/SPL/OS/GSM versions. Beacuase I just don't think that you've got in in ya to be my first failure. Show me what you got
I own a Dutch MDA Vario from T-mobile, which has a T-mobile SIM-lock. I want to remove the SIM-lock, so I tried http://forum.xda-developers.com/showthread.php?t=249474&page=1. Unfortunately it returned an error, it appears I have a 2.21 ROM, so I want to downgrade the rom, which brought me to this thread.
I've downloaded the CUSTOM_RUU_Wizard_1050412_WWE_101_11210_WWE.exe, and ran it. I get the first few screens (the caution-screen, the prepare-screen, the Update screen, the verify screen and the last screen). After that I get the screen where a percentage bar should start moving. My phone-screen is now divided in about four horizontal parts.
The first one is red-fading to black, and it reads RUU on the top-right, and the line below it reads IPL 2.21.0001. The last line in this part reads SPL 2.21.0001.
The second part is similar to the first, but it is green, without any text. The third part is similar to the green one, except it's blue.
The last part is smaller than the previous parts, it's plain white (about two lines high) and reads USB.
On my PC I get a screen telling me:
ERROR[300]: INVALID UPDATE TOOL
This Udate Uility cannot be used for your PDA Phone. Please get newer Update Utillity.
What am I doing wrong here? (BTW: I'm a computer-expert and a phone-noob)
By the way, the verify screen reads:
From:
Model ID: WIZARD
Image Version: 1.2.0.0
Language: ENGLISH
To:
Model ID: Prodigy
Image version:
Language: WWE

missed upgrade

I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
sailors_be said:
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
Click to expand...
Click to collapse
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
More info required.
When having problems with Rom Upgrades you really need to provide as much information as possible about your situation.
Please state the following:
What Rom did you have prior to upgrading, include IPL/SPL numbers.
Do you know if your device is G3 or G4 flash chip?
Is your device CID Unlocked?
Have your read (thoroughly) the instructions provided for the Rom you attempted to upgrade?
My initial guess would be that the Rom you flashed doesn't include IPL/SPL (as Risidoro clearly states in the Original Post (http://forum.xda-developers.com/showthread.php?t=276700)
In this case, you need to flash one of the Operator provided AKU 2.x Roms to get your IPL/SPL up to 2.x BEFORE you flash Risidoro's Rom to your device.
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
I'm going to give you some general info but you will have to do your own leg work to put this together.
The Wizard Wiki will contain some of the information you need:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see the stickied posts at the beginning of the Wizard upgrading forum.
I am assuming that your device is not properly CID Unlocked (although it may be doing it again will not harm your device).
First you will need to download an Operator Rom, I would suggest this one:
ftp://xda:[email protected]_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
as it is an official Qtek AKU 1.x Rom.
Second place your Device into Bootloader Mode (search on it) and run the update that you downloaded.
At this point you are pretty close to where you were when you started.
Now, CID Unlock your Phone! Use this thread:
http://forum.xda-developers.com/showthread.php?t=249474
If you have followed the instructions and everything went okay then you can now flash any of the Roms you (except one that are marked as G4 only since you appear to have a G3 Device).
sailors_be said:
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
Click to expand...
Click to collapse
Looks like you flashed a 2.xx rom with no bootloader into a 1.xx system.
First try a full 2.xx rom from a carrier (cingular 2.25 comes to mind) then reflash the rom you want. Be careful playing with the phone in the current state as the battery will drain and not re-charge. I had to have a friend charge my battery for me when I did this same thing.
many thanks
I followed the procedure you give and recuperated my phone.
Thanks a lot for the assistance.
Merry christmas and happy new year
Jean-Michel

Help. Ive got a Brick !!

Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used
AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?
but he says than he flashed with the oficcial rom there is no oficcial are agree
Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??
flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl
ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it
Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy
jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.
hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy

Help about Tmobile MDA Vario Rom upgrade

hi all..i have a T Mobile MDA vario (HTC Wizard) with the following specifications;
1.Rom Version 1.8.10.2 WWE
2.Rom Date 12/10/05
3.Radio Version 01.09.10
4.ExtRom Version 1.8.10.104
My device is G3 and WM5 installed on it.
I want to upgrade my device to the latest available ROM and want to install WM5 or WM6a or Vista on it.I searched on the forum and found too many articles and m really confused how to start and wat to choose.I never upgrade my device before and m newbie in it.
Plz if anyone can suggest me the exact links and the tutorials posted on this forum.Also how could i know if my device is CID Unlocked?
Hi,
I´m searching for the same - especially for the T-Mobile Rom and WM6.
Where can I get these?
thanx,
HM
ahmeed80 said:
hi all..i have a T Mobile MDA vario (HTC Wizard) with the following specifications;
1.Rom Version 1.8.10.2 WWE
2.Rom Date 12/10/05
3.Radio Version 01.09.10
4.ExtRom Version 1.8.10.104
My device is G3 and WM5 installed on it.
I want to upgrade my device to the latest available ROM and want to install WM5 or WM6a or Vista on it.I searched on the forum and found too many articles and m really confused how to start and wat to choose.I never upgrade my device before and m newbie in it.
Plz if anyone can suggest me the exact links and the tutorials posted on this forum.Also how could i know if my device is CID Unlocked?
Click to expand...
Click to collapse
first,plz always post full data of your phone,although you have posted the Device info,but you have not posted the actual data IPL/SPL...? of your phone,which determines the DOC chip of your phone,so post the IPL/SPL...?
As you say that you are using wm5,it must be T-Mobile official Rom,which come pre-installed on the phone,therefore your phone is SIM/CID locked.
In order to upgrade to a newer and latest wm6 Rom,it's necessary to first SIM/CID unlock your phone.
Since you say that you have a G3 device,then to read and understand how to unlock a G3 with IPL/SPL 1.xx(AKU 1) device,check the below link:-
http://forum.xda-developers.com/showthread.php?t=285435
But if you have a G3 device with IPL/SPL 2.xx(AKU 2) than read this thread:-
http://forum.xda-developers.com/showthread.php?t=263116
Fully read and understand these guides and first SIM/CID unlock your phone.
Yes,here's this wonderfull tool by mestrini to check the CID lock.unlock present status of your.Download WST Tool from the below link :-
http://forum.xda-developers.com/showthread.php?t=329170
this tool will give you all the present status and info of your phone,good luck
airbrush999 said:
Hi,
I´m searching for the same - especially for the T-Mobile Rom and WM6.
Where can I get these?
thanx,
HM
Click to expand...
Click to collapse
plz read by above post and do accordingly,you also
zabardast_1 said:
plz read by above post and do accordingly,you also
Click to expand...
Click to collapse
hi...my IPL is 1.08 and SPL is 2.26..my Phone is CID locked..but SIm is unblocked as i can use any sim card with this mobile...i downloaded the CID unlock utility and now want to perform CID unlock process.But wat to do after that? from where i can download the excat and updated Rom for my device.And can i use any Rom on my device? like O2 Rom or other Rom available in this forum?? Plz advice...
ahmeed80 said:
hi...my IPL is 1.08 and SPL is 2.26..my Phone is CID locked..but SIm is unblocked as i can use any sim card with this mobile...i downloaded the CID unlock utility and now want to perform CID unlock process.But wat to do after that? from where i can download the excat and updated Rom for my device.And can i use any Rom on my device? like O2 Rom or other Rom available in this forum?? Plz advice...
Click to expand...
Click to collapse
First of all you'll have to CID unlock your phone to upgrade to any latest wm6 roms.Read and fully understand the guide and procedure of CID unlocking in the thread which I already gave you in the above post already,you'll find there all the instructions and lokiwiz02b unlocking tool download and all the Roms (Button's Rom 1.05 and T-mobile 2.26) download links,which are required to cid unlock your device.Only after Cid unlock you'll be able to upgrade to any wm6 Rom.
But if you like to have the wm5 rom,which already installed on your device then there's no need to unlock and upgrade to another wm5 rom,as you already got one.but if you want to upgrade to wm6 rom than I'm afraid you'll have to cid unlock the device and upgrade.Once again I'm posting the link for the guide to unlocking:-
http://forum.xda-developers.com/showthread.php?t=285435
I repeat,only after cid unlock you can upgrade,how to flash a rom follow this guide:-
http://forum.xda-developers.com/showthread.php?t=310831
you can find all the latest wm6 custom build Roms here in this thread :-
http://forum.xda-developers.com/forumdisplay.php?s=&daysprune=-1&f=356
good luck
Well! as i see your phone has an IPL 1.08 and SPL 2.26,and it's required to downgrade to IPL/SPL 1.xx,therefore as you already have IPL 1.08,I think you shudn't have to flash Button's Rom 1.05 to downgrade to IPL 1.xx, you can download lokiwiz02b and try to cid unlock,it may be successful, but as it shows SPL 2.26,it may not be successful as both IPL/SPL 1.xx are required,but if it doesn't cid unlock with IPL/SPL 2.26 at first attempt,than you'll have to Flash Button's Rom 1.05 to downgrade to both IPL'SPL 1.xx
Mda vario wm5 to wm6
HI Every one thear i have T-mobiles Mda vario with wm5 on it i whant to upgrade it in wm6 how to do this sir pls help me
MY DEVICE INFO IS
ROM V 2.21.2.6 WWE
ROM DATE 3/9/06
RADIO V 02.19.11
PROTOCOL V 4.1.13.09
EXTROM V 2.21.2.109
IPL 2.21.0001
SPL 2.21.0001
GSM 02.19.11
OS 2.21.2.6
and pls tell me that whan i upgrade it is unlocked or not .not os how to unlocked it pls help
Hey,
I'm thinking about upgrading my MDA Vario too and even my IPL/SPL is the same.
IPL 2.21.0001
SPL 2.21.0001
Does that mean that ive got a G4 and do i need to unlock the CID
After it is complete, your device will automatically reboot. The IPL version will be 2.21.0001 and the SPL will be 2.21.olip. If you see this then HardSPL was successfully flashed to your device.
Click to expand...
Click to collapse
But ive never flashed my phone. Thats why i need your help. And where can i get a good Rom(if possible German)?
How to perform rom upgrade ony t-mobile wiza200 vario
Hi there!
I have a t-mobile wiza200 with the following specs:
Device was given to me and its from The Netherlands. (Dutch Language???)
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.2
VERSION
==========
ROM Version : 1.6.2.2 NLD
ROM Date : 11/1/05
Radio Version : 01.12.10
Protocol Version : 4.0.13.23
ExtRom : 1.6.2.103
HARDWARE:
==========
CPU : OMAP850
Scanning Speed : 195Mhz
RAM Size : 64MB
Flash Size : 128MB
Flash Chip Type : M-System G3
Data : 16bit
Storage Size : 47.46MB
LCD : 240x320
Colors : 65536
IDENTITY
==========
Model # : WIZA200
Platform : Pocket PC
IMEI : 35638100038564500
- Im a newbie in this... so below are some of my questions... hopefully this could be answered.
* I've read the post from lokowiz regarding the CID unlocked. Will this work for me in order to for me to flash it with WWE rom?
* How does it goes?CID unlocking and then WWE rom flashed?
* Where could I possible get a WWE rom for this type of model?
* is there by any chance a site or screenshots i could get to do all of this aside from the site http://www.mdahacks.com/item/2006/6/7/unlock-your-htc-wizard-mda-8125-phone-using-lokiwiz ?
- Hopefully someone could answer this and help me at least... Thanks to all!!!

Damn - Radio ROM upgrade & now No Signal or USB (active sync)

Hi Guys, been searching but haven't really found much on this.
Right have a G3 Wizrd and loaded TNT 19209 (had ipl & spl1.06 with GSM 01.12.10)
Everything seem to be operating fine but not GPRS (settings were correct as test on another phone TMobile UK).
So decided to update the radio ROM to 2.47.11 (i think) and now unable to get any signal and even more frightening no USB connection.
I have already BRICK a phone this wk and this was to replace that one...(yeah, what a week)
Also the phone is extremely slow now too.
So advise would be greatly appreciated on this matter..
If i go to bootloader and plug in the USB it is recognised but unable to reload the radio rom from here. Do I re run the orignal ROM TNT (as i tried the onboard reinstall)
thanks
have you upgraded the bootloaders to 2.xx before uploading the TNT ROM?
madnutter said:
Hi Guys, been searching but haven't really found much on this.
Right have a G3 Wizrd and loaded TNT 19209 (had ipl & spl1.06 with GSM 01.12.10)
Everything seem to be operating fine but not GPRS (settings were correct as test on another phone TMobile UK).
So decided to update the radio ROM to 2.47.11 (i think) and now unable to get any signal and even more frightening no USB connection.
I have already BRICK a phone this wk and this was to replace that one...(yeah, what a week)
Also the phone is extremely slow now too.
So advise would be greatly appreciated on this matter..
If i go to bootloader and plug in the USB it is recognised but unable to reload the radio rom from here. Do I re run the orignal ROM TNT (as i tried the onboard reinstall)
thanks
Click to expand...
Click to collapse
How come you got IPL/SPL 1.06 and running TNT 19209 ? TNT 19209 is a wm6.1 Rom,which can only be upgraded with IPL/SPL 2.xx. Did you CID unlock the phone before upgrading to TNT wm6 rom.
zabardast_1 said:
How come you got IPL/SPL 1.06 and running TNT 19209 ? TNT 19209 is a wm6.1 Rom,which can only be upgraded with IPL/SPL 2.xx. Did you CID unlock the phone before upgrading to TNT wm6 rom.
Click to expand...
Click to collapse
Yes, i did Super CID unlock the phone before hand using the Wizard Service Tool.
Can i now upgrade IPL\SPL by using the tri screen or is there another way without booting into WM6.1? (I'll try taking sim out but don't think that will help)....
Any ideas?
thanks
madnutter said:
Yes, i did Super CID unlock the phone before hand using the Wizard Service Tool.
Can i now upgrade IPL\SPL by using the tri screen or is there another way without booting into WM6.1? (I'll try taking sim out but don't think that will help)....
Any ideas?
thanks
Click to expand...
Click to collapse
Ok,if you say its Super CID,then you must not have upgraded to IPL/SPL 2.xx,mandatory for upgrade to wm6 thats why it shows ipl/spl 1.06 or its still not Super Cid and still on its official wm5 rom.
First,check again with WST tool to verify the CID lock/unlock status,if its still unlocked,then get it CID unlocked and upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26 rom and after that upgrade to any wm6 rom.
But,if it's already CID unlocked then,YES! first flash to upgrade to IPL/SPL 2.xx and then upgrade to wm6.
zabardast_1 said:
Ok,if you say its Super CID,then you must not have upgraded to IPL/SPL 2.xx,mandatory for upgrade to wm6 thats why it shows ipl/spl 1.06 or its still not Super Cid and still on its official wm5 rom.
First,check again with WST tool to verify the CID lock/unlock status,if its still unlocked,then get it CID unlocked and upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26 rom and after that upgrade to any wm6 rom.
But,if it's already CID unlocked then,YES! first flash to upgrade to IPL/SPL 2.xx and then upgrade to wm6.
Click to expand...
Click to collapse
Thanks - Back and kicking now. Had to start phone in bootloader mode before i was able to flash again. Gone to TMobile 2.26. Used WST regarding CID:
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
Same for SIM.
Have now loaded TNT 19209 Pro but have stuck to 2.26 for now (or should i go up a level?).
thanks
madnutter said:
Thanks - Back and kicking now. Had to start phone in bootloader mode before i was able to flash again. Gone to TMobile 2.26. Used WST regarding CID:
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
Same for SIM.
Have now loaded TNT 19209 Pro but have stuck to 2.26 for now (or should i go up a level?).
thanks
Click to expand...
Click to collapse
Thanks ! glade you got it back and kicking
Well,upgrading to IPL/SPL 3.08 will not give you some very phenomenal boost or changes,it'll just slightly improve the Boot up timing only,which is hardly noticeable and nothing else,where as,it also sometimes creates problems while downgrading.IPL/SPL 2.26 are the most stable Bootloaders and have proven their worth time and again,if you are happy and comfortable with 2.26,My suggestion wud be to stick with them instead of upgrading to 3.08.
IPL/SPL
zabardast_1 said:
Thanks ! glade you got it back and kicking
Well,upgrading to IPL/SPL 3.08 will not give you some very phenomenal boost or changes,it'll just slightly improve the Boot up timing only,which is hardly noticeable and nothing else,where as,it also sometimes creates problems while downgrading.IPL/SPL 2.26 are the most stable Bootloaders and have proven their worth time and again,if you are happy and comfortable with 2.26,My suggestion wud be to stick with them instead of upgrading to 3.08.
Click to expand...
Click to collapse
Do you have 2.26? I would like to downgrade back to it. I upgraded to 3.08, but I don't really see any difference.
thurman said:
Do you have 2.26? I would like to downgrade back to it. I upgraded to 3.08, but I don't really see any difference.
Click to expand...
Click to collapse
Well,here I wud rather suggest you to keep running 3.08,as long as,it doesn't give or pose any problem,coz downgrading from 3.08 to 2.26 sometimes doesn't go successful and creates problems.
But if you really want to downgrade to 2.26,than simply flash back the T-mobile 2.26,it'll downgrade the IPL/SPL to 2.26,after that you can again upgrade to any latest wm6 or 6.1 rom,but the IPL/SPL will remain at 2.26.

Categories

Resources