Related
Hi,
I've installed the latest AKU 3.2 Version on my Wizard.
Now i've wanted to downgrade to AKU 2.0 (with the original Loader Provided from "Vario_AKU2.0_05-2006.exe") and the tool tells me it is not possible. Is there a way to make it run?
Thanks a lot
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Nobody warns ??????????????????????????
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
mforce said:
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Click to expand...
Click to collapse
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Dr Puttingham said:
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
Click to expand...
Click to collapse
Already tried that, not working.. btw wise gramma
vseehua said:
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Click to expand...
Click to collapse
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Possible solution
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
mforce said:
Already tried that, not working.. btw wise gramma
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Click to expand...
Click to collapse
If you have a G3 device you can downgrade your IPL/SPL. I've done it my Cingular 8125 and it's 3 replacement PDA's numerous times. In addition I've downgraded at least 20 phones to 1.05 so's I could unlock and then upgrade. And then done it again. If you follow faria's instructions that is.... Now I HAVE had to flash the 1.05 twice to get the SPL down to 1.05. Humor us huh?
Note: I realize that Faria says that it doesn't work above 2.21 but I have performed this procedure on at least a dozen "out of the box" Cingular 2.25's. Downgrade to 1.05. Extract lokiwiz to the root of your C drive. Copy enablerapi.cab to your device (I know that you've unlocked your device, just indulge me please ) Execute enablerapi.cab from your PDA. get to a Dos prompt and run lokiwiz from the C prompt. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Dr Puttingham said:
If you have a G3 device you can downgrade your IPL/SPL. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Click to expand...
Click to collapse
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
A2Z said:
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Click to expand...
Click to collapse
Great! it works
stefan1975 said:
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
Click to expand...
Click to collapse
This one.. (flash it 2 times!)
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Seppl82 said:
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
Click to expand...
Click to collapse
Does NOT work, thnx anyway
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Downgrading/Upgrading
Dr P. or anyone else,
I've seen "somewhere on this board" a description of how to flash "any rom" without having to downgrade to 1.05, it stated to change the .exe file to a .rar and then change the ruu file to one that is not looking for the current phone status. I've tried that and have not had success in doing so. IF there is infact a way to do this, could someone please provide a blow by blow scenario to accomplish it?
Thanks,
vpu2
HighVoltage said:
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Click to expand...
Click to collapse
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Dr Puttingham said:
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Click to expand...
Click to collapse
Hi Guys,
I tried everything but it doesn't help das anyone had another option?
Thanks
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Dr Puttingham said:
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Click to expand...
Click to collapse
I tried everything what everybody said in this post.
Mr hokkie, please humble me and document exactly what device you own and your exact IPL/SPL/OS/GSM versions. Beacuase I just don't think that you've got in in ya to be my first failure. Show me what you got
I own a Dutch MDA Vario from T-mobile, which has a T-mobile SIM-lock. I want to remove the SIM-lock, so I tried http://forum.xda-developers.com/showthread.php?t=249474&page=1. Unfortunately it returned an error, it appears I have a 2.21 ROM, so I want to downgrade the rom, which brought me to this thread.
I've downloaded the CUSTOM_RUU_Wizard_1050412_WWE_101_11210_WWE.exe, and ran it. I get the first few screens (the caution-screen, the prepare-screen, the Update screen, the verify screen and the last screen). After that I get the screen where a percentage bar should start moving. My phone-screen is now divided in about four horizontal parts.
The first one is red-fading to black, and it reads RUU on the top-right, and the line below it reads IPL 2.21.0001. The last line in this part reads SPL 2.21.0001.
The second part is similar to the first, but it is green, without any text. The third part is similar to the green one, except it's blue.
The last part is smaller than the previous parts, it's plain white (about two lines high) and reads USB.
On my PC I get a screen telling me:
ERROR[300]: INVALID UPDATE TOOL
This Udate Uility cannot be used for your PDA Phone. Please get newer Update Utillity.
What am I doing wrong here? (BTW: I'm a computer-expert and a phone-noob)
By the way, the verify screen reads:
From:
Model ID: WIZARD
Image Version: 1.2.0.0
Language: ENGLISH
To:
Model ID: Prodigy
Image version:
Language: WWE
Can someone please help me out my friend told me he got WM6 working on his T-Mobile MDA, and i'm using a 2.26 ROM I got from here a while back
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
He sent me : T-Mobile_RUU_Wizard_2261020_226_22511_ENG_US.exe
I ran this and apparently that's how I got the version i'm running now, I forgot which I had pervious, but I ran that, everything went smooth, it ran autoconfig etc, CID unlocked beforehand, and then i got CB-AIRAF.exe from here and then I ran it, it updated and completed, but when the phone boots up it is WM5.. it then says please wait 3 seconds to customize, then it puts up an error message reading "\Windows\AutoConfig.exe Not found" or something similar, and then that app closes, and the phone is bare bones WM5.. why the heck isn't Wm6 installing? it's very frustrating.. someone bare with me and help me figure this out i'd be greatly appreciated.
If it's easier to contact me via AIM.. my SN is Cynth3tik
You apparently aren't CID Unlocked. Do the CID Unlock procedure at the top of this forum. Then make sure you flash the official TMobile ROM again to get back to IPL/SPL 2.26. Then upgrade to teh Faria rom.
The official tmobile rom.. i'm not sure which that is or where i get it from.. is that the cooked tmobile rom file i have ?
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
T-Mobile MDA Software Updates
T-Mobile MDA Software Version (2.26.10.2)
T-Mobile MDA User Manual
this isn't what i want is it ?
sintax said:
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
T-Mobile MDA Software Updates
T-Mobile MDA Software Version (2.26.10.2)
T-Mobile MDA User Manual
this isn't what i want is it ?
Click to expand...
Click to collapse
That is the official TMobile US ROM, the one that is recommended as a baseline ROM.
--M
ok i've done that now i can attempt to install the Faria rom ?
No. As I said, I think you are CID locked and thats why the update failed before. You now have to go through the steps of CID Unlocking. Please go to the top of this forum and find the Sticky by Dr. Putingham that is on how to CID Unlock your phone (title starts like [Read First]). Follow that step by step (line by line). Don't skip anything. You will downgrade, run a tool, downgrade again, and then upgrade back to this TMobile ROM. After all that, then you should be good to go for doing Faria's (or any other custom ROM). Once you CID Unlock you shouldn't have to do it again (unless you ever go back to a 1.x ROM at some point).
ok guys i followed the forum on how to unlock.. i installed the buttons rom, then CID unlocked, then put the official TMO rom on, then installe the Faria Crossbow, it worked !
BUT... the screen where it says tap the screen to set it up.. i tap it and it does NOTHING, as if its froze, i restarted it, same thing :-( any ideas?
EDIT: SRRY! i pulled the battery out and put it back in and it works! thanks for all the help guys!
Might anyone know why if i had a contact with a picture stored for them, i backed up/synced to Outlook 2007 before the upgrade to wm5, and outlook has the pics stored just fine, but when i sync with wm6, all my contacts sync except for ones with pictures...any ideas ?
Glad you made it to WM6, and able to figure out your issue with the screen.
As for pic contacts not sync'ing I'm not sure. I don't sync with outlook (I use SyncML with my company calendar) and my pic contacts all did fine that way from WM5 to WM6.
Hi,
I tried to install the faria rom on my qtek 9100 with WM6, the RUU ran to 99% when I got an error and ran into recovery process. The phone now boots in the 3 colors mode with IPL and SPL 2.17. When I plugged in the USB cable, I have "USB" at the bottom of the screen.
My main problem is that active sync 4.5 does not connect to the phone anymore and I can't run any RUU anymore
I tried to install/uninstall active sync; I remove/put back batteries in the phone and still no connection with active sync
I tried other RUU like core 2.0, crossbow reloaded 1.5, love rom but in fact nothing as no connection established
Please if you know the answer, please help me as I have... no phone anymore
Thanks
Cheers,
GG
you don't need active sync to run the ruu. just plug in the phone, when you see usb above the left softkey, flash your chosen rom
are you CID unlocked??
because if not, you will get this problem and possibly brick your phone. click the CID unlock link in my Sig for tutorial
thanks for answer. I really thought that active sync was needed. I finally used the initial rom from my operator so a WM5 and my phone works again! Thanks a lot!
So... i tried again to flash it ;-)
but before I unlocked and uncided it.
Then I flashed faria, core 2.0 and still an error at the end then entering recovery mode. Each time to reflash one of these I had to install the original rom for the operator. I finally installed the love rom: it works but tried to flash then faria and others and again upgrate utility error at the end.
Any idea why I can't flash these roms on my machine (a qtek 9100 - G3)
(by the way my spl stayed at 2.17 but IPL dropped from 2.17 to 1.01)
Thanks in advance for your advise
Cheers,
GG
g4gee said:
Any idea why I can't flash these roms on my machine
Cheers,
GG
Click to expand...
Click to collapse
yes, you are not CID unlocked
although I ran the CID unlocked program...
Are you saying that I should cid unlock after each time I re-installed my original ROM operator?
I thought it was writing in different memory part..
Thanks for your help
Cheers,
GG
g4gee said:
although I ran the CID unlocked program...
Are you saying that I should cid unlock after each time I re-installed my original ROM operator?
I thought it was writing in different memory part..
Thanks for your help
Cheers,
GG
Click to expand...
Click to collapse
No, but it wouldn't hurt to re-do. Are you sure you have CID unlocked previously? what have you flashed before this problem? some Roms will flash to a locked device
got it working in the end.
I had to reinstall the .cab file after the sim unlock to effectively cid unlock the phone. I was wrongly focusing on the activesync connection I could not get to work
Thanks a lot once more for your help as I have a fully mobile working under WM6!
Cheers,
GG
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used
AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?
but he says than he flashed with the oficcial rom there is no oficcial are agree
Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??
flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl
ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it
Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy
jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.
hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy
Needed
1.an BREEZE device[The phone must be able to enter bootloader (3color screen)]
2.TerraTermPro http://rapidshare.de/files/39206549/TeraTermPro.rar.html
3.An rom matching to your device
GUIDE
1.Disable active sync - uncheck
file->connection settings->allow usb connection
2.Put the phone in bootloader mode
power the phone pressing power and camera keys
read and note all displayed info
3.Launch TerraTermPro on the pc
un the connection window check serial and choose USB
in the new open window type
info 2
and note the information
RIGHT - HTCSQTEK_A07„§m»HTCE
WRONG - HTCSF kEØ(HTCE
close terra term
4.Figure out wich rom you need
till now i have roms for
Russian Rom
QTEK_A07
HTC__A07
http://rapidshare.com/files/109782599/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
WWE Rom (QTEK,HTC,Dopod,OCH)
QTEK_Z12
HTC__Z12
http://rapidshare.de/files/39206931/RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar.html
DOPOD001 - Chinese Rom
http://www.megaupload.com/se/?d=YD49L7JD
5.
Flash the rom corresponding to your CID
6.
Boot the phone and application unlock it
7.
Run SSPL and UPGRADE to 6.1 rom and latest radio version
8.
Save the rom that saved you for latter - it colud help you again
IF YOU CANT FIND THE CID AND ROM HERE WAIT TILL SOMEBODY POSTS IT.
IN CASE OF "HTCSF kEØ(HTCE" IN TERRATERM IS VERY HARD TO REPAIR DUE TO DAMAGED BOOTLOADER
you can repair it using this guide
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
wich requires some advanced skills
OTHER ROMS - wich i dont have
i_mate_SP_JAS_1.15.301.0.exe
RUU_BREE100_1.15.71.6_1.06.00.00_OCH_Ship.exe
ruu_bree100_1.15.707.3_dopodwwe_ship.exe
ruu_bree100_1.15.709.3_dopodcht_ship.exe
Please help me to improve this list sending me CID's and ROM's
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
what do you mean by very hard to repair? it's impossible?
this is the ROM i flashed back to my phone (although the flashing is 100% completed successfully, it is still stuck at 2nd boot WM logo screen)
RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
i just uploaded th dopod rom in case anyone needs it
http://rapidshare.com/files/109798242/RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
alexnvidia said:
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
what do you mean by very hard to repair? it's impossible?
this is the ROM i flashed back to my phone (although the flashing is 100% completed successfully, it is still stuck at 2nd boot WM logo screen)
RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
i just uploaded th dopod rom in case anyone needs it
http://rapidshare.com/files/109798242/RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
use this wisely
jerpelea said:
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
use this wisely
Click to expand...
Click to collapse
how do i put breeze into KITL Mode? is it the camera+power button tri-colour thing?
reads what stands on hermes wiki page...
maybe i'm talking ****, but i think too enter kitl mode you must have a running windows mobile...
just find the kitl mode "reset" on hermes its "now for your Hermes: hold the Comm button and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL. "
futureshock said:
reads what stands on hermes wiki page...
maybe i'm talking ****, but i think too enter kitl mode you must have a running windows mobile...
just find the kitl mode "reset" on hermes its "now for your Hermes: hold the Comm button and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL. "
Click to expand...
Click to collapse
exactly.. that's the worrying part for me now. i have no idea how do i enter KITL mode in breeze. any ideas?
alexnvidia said:
exactly.. that's the worrying part for me now. i have no idea how do i enter KITL mode in breeze. any ideas?
Click to expand...
Click to collapse
no
i did this on my hermes once
having the same problem as you have on breeze
hermes and breeze share the same platform
we have to find the answer
How did you manage to screw the bootloader
can you provide us a list of what you have flashed on the device?
what is the brand,model(herm 100/herm160),vendor,region of your device
i am triing to figure an solution
all others upgraded succesfully to 1.34 rus getting HTC__A07 CID and after that radio and wm 6.1
what did you do ?
BR
jerpelea said:
no
i did this on my hermes once
having the same problem as you have on breeze
hermes and breeze share the same platform
we have to find the answer
How did you manage to screw the bootloader
can you provide us a list of what you have flashed on the device?
what is the brand,model(herm 100/herm160),vendor,region of your device
i am triing to figure an solution
all others upgraded succesfully to 1.34 rus getting HTC__A07 CID and after that radio and wm 6.1
what did you do ?
BR
Click to expand...
Click to collapse
ok. i have no idea hoiw i screwed up the bootloader too. this is what happens.
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
what should i do now? i really appreciate you/anyone taking the time to look into this issue. thank you.
have you tryed a hardreset??
and did you cid is now screwed up??
alexnvidia said:
ok. i have no idea hoiw i screwed up the bootloader too. this is what happens.
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine.
Click to expand...
Click to collapse
here you needed the sspl to flash official rom
i think that i have this im my tread
then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
Click to expand...
Click to collapse
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
what should i do now? i really appreciate you/anyone taking the time to look into this issue. thank you.
Click to expand...
Click to collapse
did you try to hard reset?
the two "-" keys and power
???
futureshock said:
have you tryed a hardreset??
and did you cid is now screwed up??
Click to expand...
Click to collapse
yes. i tried hard reset (two soft keys+power then press 0) many times. doesnt work. tried the mtty to format the phone, doesnt work.
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
ok, firstly, when i loaded up the SPL1.09, the phone boots up fine. it only got stuck when the flashing to WWE1.38 failed. at this point i still have the new IPL.
the old IPL was flashed in during the recovery attempt when i tried to flash the old official WM5 ROM back hoping it would also downgrade the SPL, but it didnt. it only downgrade the IPL to 0.9. SPL remains 1.09
alexnvidia said:
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
ok, firstly, when i loaded up the SPL1.09, the phone boots up fine. it only got stuck when the flashing to WWE1.38 failed. at this point i still have the new IPL.
the old IPL was flashed in during the recovery attempt when i tried to flash the old official WM5 ROM back hoping it would also downgrade the SPL, but it didnt. it only downgrade the IPL to 0.9. SPL remains 1.09
Click to expand...
Click to collapse
im my guide i wrote to use sspl
if you use sspl you finish the 1.34 upgrade from spl 1.09 and is everything fine
if not no
from here you had spl A07 so you could flash ONLY original htc Rus rom
you flashed an older ipl instead
an older ipl that does not load correctly the new spl
the spl can not be downgraded from 1.10(1.09) to 2.05
here is the problem
and as long as you dont have an rom with your CID od HARDSPL the phone can only be flashed using my hermes guide if we find the buton combination on breeze
BR
jerpelea said:
im my guide i wrote to use sspl
if you use sspl you finish the 1.34 upgrade from spl 1.09 and is everything fine
if not no
from here you had spl A07 so you could flash ONLY original htc Rus rom
you flashed an older ipl instead
an older ipl that does not load correctly the new spl
the spl can not be downgraded from 1.10(1.09) to 2.05
here is the problem
and as long as you dont have an rom with your CID od HARDSPL the phone can only be flashed using my hermes guide if we find the buton combination on breeze
BR
Click to expand...
Click to collapse
so what you mean now is my IPL 0.9 is WWE and my SPL is 1.09 Qtek A07? and this is causing the problem? so can i flash the IPL on the phone to the lastest one in tri-colour mode so that it can read the 1.09 SPL? can u please provide me with the SPL upgrade file and utility?
any solutions so far? guys?
alexnvidia said:
so what you mean now is my IPL 0.9 is WWE and my SPL is 1.09 Qtek A07? and this is causing the problem? so can i flash the IPL on the phone to the lastest one in tri-colour mode so that it can read the 1.09 SPL? can u please provide me with the SPL upgrade file and utility?
Click to expand...
Click to collapse
no
your problem is that ipl 0.9 cant load spl 1.09
the memory load address differs and it cant load it correctly
i havent found an solution
you need an valid spl loaded to flash
you can try all the original roms (don't edit them)
and see if any one of them tries to push ipl and spl before actualy flashing
also try the official 1.09 spl flash
BR
nowaday, I found this thread useful. thanks
what happened? I was upgrading to futureshock ver. 4 and during phone'd swiched off ... I was looking for original ROM posted here in Breeze forum, but I didn't find it ... after read this 1st post I recoginze, that Czech ROM official is RUS .. that news for me (of course good ).
KITL Hermes
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried hard reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
I tried KITL Hermes unbrick method but same problems like had others on this forum, I don´t know how to turn my MTeoR to KITL debug mode because device is different like Hermes so key combination doesn´t matches with Breeze. MTTY - info 2 command show me CID: waiting interpreter failed...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
DOPOD601
which RUS update rom can i use?thanks
HTCSDOPOD601in眘HTCE
which rom?
can somebody email to : [email protected] or [email protected] ?
thank you