upgrade MDA vario NL without unlocking. Now dead. Help! - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I upgrade mda vario with shiprom T-Mobile NL without unlocking CID .. after update mda vario is dead ...
please help me...
dheers
indra9110

anybody ????

hello... anybody can hepl mp please.....

Can you enter bootloader mode by pressing power and recording button. If yes, then your phone is not death yet.

i would love to try to help but i cant quit staring at the beautiful image in your signature
what was your problem again :lol:
seriously try to get to the bootloader screen as mentioned above

thx for answer....
i try to get into bootloader mode ... but still no respon at all .....
Im defenedly frustation ....
sorry my english
indra9110

indra9110 said:
thx for answer....
i try to get into bootloader mode ... but still no respon at all .....
Im defenedly frustation ....
sorry my english
indra9110
Click to expand...
Click to collapse
do the lights even come on? does anything happen? i have seen people try pulling their battery out for a few minutes and even just letting it charge for a few hours..

It might be that your battery power have run out. Try to somehow recharge your battery (use a different wizard device perhap) and retry.

i try to charge the bat with wall charger ... but wizard still wont ON
cheers
indra9110

then your wizard might be brick.

Related

Help, I think I've done something really wrong... :|

I've just bought a HTC Charmer (T-mobile MDA Compact2). As I was looking for a french rom, I've read that the charmer was nearly the same (or exactly ?) pda as the Wizard. So As I've found a french rom for wizard, I tried to flash the charmer with it, thinking that if it was not good, it would reject the rom... Or, the flashing process has gone well till the 100% but now, the phone does not even want to light on.... :shock:
Do you think there's something possible to do ?? :?:
Thanks a lot for your help, I really need it !!!!
Just up, I really need help, I'm completely desperate... :|
You can put your device in bootloader mode?
eagleamon said:
I've just bought a HTC Charmer (T-mobile MDA Compact2). As I was looking for a french rom, I've read that the charmer was nearly the same (or exactly ?) pda as the Wizard. So As I've found a french rom for wizard, I tried to flash the charmer with it, thinking that if it was not good, it would reject the rom... Or, the flashing process has gone well till the 100% but now, the phone does not even want to light on.... :shock:
Do you think there's something possible to do ?? :?:
Thanks a lot for your help, I really need it !!!!
Click to expand...
Click to collapse
What symptoms do you have exactly? No led, no backlight, no text on the screen, no charging? What happens if you try to enter the bootloader?
Thanks for your interest.
In fact, after the flashing process, the phone switch off, and now, I cannot switch it on, if I put the usb cable, the pc does not detect anything, but the led ...
I let the beginnning but finally it starts !!!!
Yesterday, I disconnected the battery so as the secure one discharge also, and a few minutes ago, I put it on the 220V without hope and the led lighted ! and no it starts, but in German .. (I do not really understand this..)
So do you think that I should retry the french wizard rom ? Or this try cannot work ?
If this is the case, does someone know where I could find the English Charmer Rom (I do not find the T-mobile download page anymore) or better a french one
Thanks a lot in all case !!!
You flashed a charmer with a wizard ROM and it's working???
Well, i think that for you it's better to flash your device with a charmer ROM. On the ftp there is only a english ROM, not french.
No in fact it works again, but it's still in german ...
Could you please give me the link of the french rom ? I cannot find it...
Just a few more info...
So the phone works, in german, but there's someting really strange.. if I try to put it in bootlaoder mode, it's impossible, it switch off but do not swith on after, and not at all in fact, I have to get off the battery or put it on the charger so that it starts again...
And with the charger, after the boot, I can restart in bootloader mode, but at the second I unplug the charger, the phone switch off and it's not possible to restart witout the charger.....
Do you have an idea of what's happening ?? And how I could flash with an english rom ?? (doesn't work with the cradle USB cable..)
Thanks a lot !!
I think that the best thing to do is to flash the ROM with the WWE or German, as you like, you will find the ROMs on the Charmer section of the FTP.
Put your device in bootloader mode with the usb connected, then upgrade the ROM.
Indeed that would be the best solution but with the usb cable, it doesn't stay in bootloader mode, it switch off immediately ...
Do you know a reason of this behaviour ?
No one's got an idea .. ?
I'm still worry, so I do up
Just a last try
Is it possible that the bootlader has been changed and now dosen't work anymore ?

Imate K-Jam dead after downgrading

I have a Imate K-jam with K-JAM_WWE_216901_2169101_020710_ship rom and I have try to downgrade with the rom K-JAM_Italian_1030902_102_ship and the file newromupdateutility_wizard_noid.exe but now the device is dead.
After upgrading the device was resetted and now the screen is black. I have try reset, hard reset and to enter in the bootloader but nothing appened.
Someone can help me, please?
Sorry for my English.
Claus72 said:
I have a Imate K-jam with K-JAM_WWE_216901_2169101_020710_ship rom and I have try to downgrade with the rom K-JAM_Italian_1030902_102_ship and the file newromupdateutility_wizard_noid.exe but now the device is dead.
After upgrading the device was resetted and now the screen is black. I have try reset, hard reset and to enter in the bootloader but nothing appened.
Someone can help me, please?
Sorry for my English.
Click to expand...
Click to collapse
I dont know much, but i think its that you tried to downgrade withe a wizard that dosent support downgradeing. i.e spl/ipl ending with .001 i will just say try and get a replacement.
This is exactly why there are so many replies to newbies saying "Read, Read, Read and then read some more".
I'd agree with the theory that your device was a G4 chip (which should never be flashed with a 1.x Rom).
If he can get the boot loader then he can flash the previous rom back :wink:
i am not sure which key u have to press. best man to ask is buzz lightyear
If he can get the boot loader then he can flash the previous rom back :wink:
i am not sure which key u have to press. best man to ask is buzz lightyear
The problem is that I can't enter in BootLoader mode. I try with camera+reset and camera+voice+reset but the screen is always black.
Can't you return it to Imate with a story that the battery was empty, you wanted to charge it, but it stay dead?
I hope you got warranty.
Claus72 said:
I have a Imate K-jam with K-JAM_WWE_216901_2169101_020710_ship rom and I have try to downgrade with the rom K-JAM_Italian_1030902_102_ship and the file newromupdateutility_wizard_noid.exe but now the device is dead.
After upgrading the device was resetted and now the screen is black. I have try reset, hard reset and to enter in the bootloader but nothing appened.
Someone can help me, please?
Sorry for my English.
Click to expand...
Click to collapse
I got the same problem after upgrade my MDA Vario(T-mobile NL) by using RUU_Prodigy_2170702_217_20710_TMO_US.exe from the ftp.
It looks like no power at all. Anyone knows how to solve this?

My MDA Vario(Wizard) is almost dead!! Help please!

Hello,
Iám Spanish and I just bought a MDA VARIO in GErmany, so I tried to install the spanish rom "2.18.7.8" and i did it. Everything was ok during installation, but when I restarted... The device couldn´t restart. It allway stop on the Qtek screen(with the sky), sometime it change the screen into a white(HTC innovations) one for a second. But it doesn´t work.
I made soft and hard reset, but nothing changes.
I also tried to install an other rom by bootloader way, but the rom sais that is not possible to contact with the phone device.
I´m scared and I don´t know what to do.
Know this is the rom´s I have on my Qtek 9100 :
IPL 1.06
SPL 1.06
OS 2.18.7.8
Help please!!
Jmavatar said:
Hello,
Iám Spanish and I just bought a MDA VARIO in GErmany, so I tried to install the spanish rom "2.18.7.8" and i did it. Everything was ok during installation, but when I restarted... The device couldn´t restart. It allway stop on the Qtek screen(with the sky), sometime it change the screen into a white(HTC innovations) one for a second. But it doesn´t work.
I made soft and hard reset, but nothing changes.
I also tried to install an other rom by bootloader way, but the rom sais that is not possible to contact with the phone device.
I´m scared and I don´t know what to do.
Know this is the rom´s I have on my Qtek 9100 :
IPL 1.06
SPL 1.06
OS 2.18.7.8
Help please!!
Click to expand...
Click to collapse
With activesync on it will say it won't detect the phone plugged in while it's in bootloader mode. Run the ROM update anyway.
Thanks, but it doesn´t work. The Rom software said that is unable to connect with the phone.
I just tried to install the vanilla WM6, and with zhis rom, the installation could begin, but at 95% it happen an error... and i need to reinstal an other time the vanilla WM6.
I tried an other time, but the same error on 95% :-( And i can´t instal others rom.
did you CID unlock?
enter bootloader and flash the original rom from that screen, then start again. if you don't know how to get into bootloader screen or what CID lock is, read the wiki and the stickies in the forum. Don't worry, it is not a brick
bbobeckyj said:
did you CID unlock?
enter bootloader and flash the original rom from that screen, then start again. if you don't know how to get into bootloader screen or what CID lock is, read the wiki and the stickies in the forum. Don't worry, it is not a brick
Click to expand...
Click to collapse
Thanks a lot for our support! I still tnhinking I have a brick :-S... Now It only apears the bootloather screen(three colors bars) due to the incompleted vanilla WM6 uppdate.
I think the CID is unlocked. I runed the Lokiwiz, but now, I am not sure if It worked... And now, the phone is without battery!!
Where I can find my original rom? The device is from T-Mobile and is a MDA VARIO. From Austria. I have 2 CD´s, one with windows 5 applications, and other with software... I can´t fin the rom.
Thanks a lot!!
there is a link to the US tmobile ROM in my signature. it may work, i don't know.
as for the dead battery, you have a few options,
1) charge the battery in a desktop charger such as this one from ebay.
2) try charging in a friend's wizard
3) i have read references to charging the battery with a n-i-n-e v-o-l-t battery and a p-a-p-e-r-c-l-i-p (i've typed it like that because there are getting more and More references to things than actual solutions when you search) battery many times, try googling this site for that (again in my sig).
the ROM is not on any CD they give out with it because they don't want people flashing their devices and ending up in the situation you are - why do you think they are locked.
bbobeckyj said:
there is a link to the US tmobile ROM in my signature. it may work, i don't know.
as for the dead battery, you have a few options,
1) charge the battery in a desktop charger such as this one from ebay.
2) try charging in a friend's wizard
3) i have read references to charging the battery with a n-i-n-e v-o-l-t battery and a p-a-p-e-r-c-l-i-p (i've typed it like that because there are getting more and More references to things than actual solutions when you search) battery many times, try googling this site for that (again in my sig).
the ROM is not on any CD they give out with it because they don't want people flashing their devices and ending up in the situation you are - why do you think they are locked.
Click to expand...
Click to collapse
Thanks a lot!! But it doesn´t work. Error[294] Invalid Vender ID :S
I can charge the battery with the normal charger to 220v.
Any idea??
My IPL is 1.06
and SPL 1.06
did you buy it from tmobile or ebay? (is it german tmobile or just bought in germany?)
go to the tmobile site and look for firmware/software updates for the mda vario. i don't know german so i could not find the mda vario on it
bbobeckyj said:
did you buy it from tmobile or ebay? (is it german tmobile or just bought in germany?)
go to the tmobile site and look for firmware/software updates for the mda vario. i don't know german so i could not find the mda vario on it
Click to expand...
Click to collapse
I bought yesterday on a T-mobile shop from Austria. I downloaded it´s roms... but the same problem.
I will carry the device to the shop...
Thanks a lot!!
try this button rom
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
then have you followed the intructions in Dr Ps thread
http://forum.xda-developers.com/showthread.php?t=285435
do not give up
bbobeckyj said:
try this button rom
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
then have you followed the intructions in Dr Ps thread
http://forum.xda-developers.com/showthread.php?t=285435
do not give up
Click to expand...
Click to collapse
Thanks again, but I returned the phone to the shop. Something didn´t work since the beginning. Tomorrow I will reveive a new one...
Thanks an other time!
Hi,
I got a similar problem.
I wanted to install the latest AkU 3.3 on my MDA VARIO but it stopped at 95%.
So I tried to install the oldest version available from T-Mobile Germany.
But now my device restarts again and again.
It says
IPL 1.06
SPL 1.03
OS 2.24.2.8.
and restarts.
Sometimes (with the oldest software version) I can calibrate my touchscreen and then the device installs the T-Mobile software. After that it restarts again and again.
I also tried softrest after the message: in 3 seconds .... software will be installed. Then it reboots and sometimes wm5 starts but is running VERY slow. I can't switch it off using the power buttom.
I unlocked my MDA Vario using Lokiwiz. No CID Unlock just Unlock.
What can I do?
Thanks in advance
very simple, flash back to your original rom, then, CID UNLOCK

Do I have a dead qtek 9100?

I downloaded a wm6 upgrade pack from Demonoid. The instructions told me that I needed to load an older rom on before I could CID unlock. The ROM was: CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE. The ROM that was originally on my 9100 was the lastest from Qtek. My Qtek now will not move on from the splash screen. Does this sound like I have a dead pda? Anyone have any idea how to get out of this problem. Any advice or comments would be appreciated.
Thanks
PS: I turned it off for the time being. Now I can't even turn the dam thing on!
I think I may have found a solution if I can just turn it on!! Won't charge either!
Well if u can get it turned on hold the voice and cam buttons and get it into bootloader you'll be good

Cant Get Bootloader Mode on SPV M5000

HELP Please i was doing an upgrade to wm6 on my SPV M5000 (o2 Exec) and it stoped at 99% and came up with error on the pc since then i cant get it to go to the bootloader bit so i can try again the spv dosent respond to any button just dead PLEASE HELP
nashpatel said:
HELP Please i was doing an upgrade to wm6 on my SPV M5000 (o2 Exec) and it stoped at 99% and came up with error on the pc since then i cant get it to go to the bootloader bit so i can try again the spv dosent respond to any button just dead PLEASE HELP
Click to expand...
Click to collapse
Two scenarios:
1- Flashed wrong IPL/SPL and now phone's dead with no solution possible
2- Problem with battery that can be solved by shorting the pads for which you must make a search for the procedures

Categories

Resources