I have a Wizard (Cingular 8125) and a Jabra BT500 bluetooth headset. They paired up okay and I can answer and end calls with my Jabra BT500.
However, tapping / pressing the correct button on my Jabra BT500 does not open the phone voice dialing. In fact, nothing happens when I press the button on the Jabra even though the two devices are paired. Pressing the button multiple times does nothing either.
Anyone have any ideas whether this is a problem with my 8125 or my Jabra BT500? If so, are there any solutions? If not, are there other bluetooth headsets that seem to work correctly. Jabra told me this was common and there is no fix!
ROM Version: 2.25.11.1 WWE
ROM date: 05/11/06
Radio Version: 02.25.11
Protocol Version: 4.1.13.12
ExtROM Version: 2.25.11.102
From the HTC website I believe this is the most current ROM version.
Thanks for your help.[/b]
Re: Wizard (Cingular 8125)&Jabra BT500-can't initiate vo
I had this same problem. I went through every jabra headset out there to test and see how I liked them. Anyways -- i couldnt get voice command nor voice dialing to work with the BT500. Take it back and get the JX10
ggreenwood said:
I have a Wizard (Cingular 8125) and a Jabra BT500 bluetooth headset. They paired up okay and I can answer and end calls with my Jabra BT500.
However, tapping / pressing the correct button on my Jabra BT500 does not open the phone voice dialing. In fact, nothing happens when I press the button on the Jabra even though the two devices are paired. Pressing the button multiple times does nothing either.
Anyone have any ideas whether this is a problem with my 8125 or my Jabra BT500? If so, are there any solutions? If not, are there other bluetooth headsets that seem to work correctly. Jabra told me this was common and there is no fix!
ROM Version: 2.25.11.1 WWE
ROM date: 05/11/06
Radio Version: 02.25.11
Protocol Version: 4.1.13.12
ExtROM Version: 2.25.11.102
From the HTC website I believe this is the most current ROM version.
Thanks for your help.[/b]
Click to expand...
Click to collapse
Thanks, I'll try a JX10. Funny thing though, I've got a friend with this same phone on T-Mobile instead of Cingular and a Jabra BT500 and it works! Also, I tried my wife's plain vanilla Motorola H500 and it works fine. Very strange.
MY Jabra BT500 works fine with my 8125. I've hacked the registry to use MS Voice Command instead of the Cyberon Cheezy voice tag dialer.
I've even successfully used Cyberon Voice Commander 1.6 with the BT500.
Yes, activation on button press....
Hi kyphur - for a novice can you give me any instructions on how to do this?
I tried the Jabra JX10 and, unlike my BT500, it seems to work perfectly. I really don't understand why my BT 500 won't work.
Thanks
Related
Is there a Rom available that has the Hands Free Profile Working?. The latest one from Imate has the other party hearing me but I cannot hear them! I just want that feature & a Stable rom that I do not have to do a soft reset 3 or 4 times a day. I would settle for a soft reset 2 times a day.I need help bad! I have been waiting since I got this in October.Thanks for any help.
Jerry
I have rom 1.22.00 WWE i use this with a parrot BT car kit, and it works perfectly!
jerryjans said:
Is there a Rom available that has the Hands Free Profile Working?. The latest one from Imate has the other party hearing me but I cannot hear them! I just want that feature & a Stable rom that I do not have to do a soft reset 3 or 4 times a day. I would settle for a soft reset 2 times a day.I need help bad! I have been waiting since I got this in October.Thanks for any help.
Jerry
Click to expand...
Click to collapse
My rom is 1.22.00 WWE
Extended ROM is 1.22.557
I use it with my HCB300 sonyericsson car kit and it works without any problem.
Wh
Hugot : what is your Bluetooth stack Version? Is your Sony car kit Hands free or Headset? Can you please post the following Rom Date, Radio Version, Protocal Version. Where did you get the rom upgrade from & what device are you using?
Guest what are the sme things on your device that I asked Hugot? If you are using the latest rom version from Imate then you are using the headset version of the Parrot CK3100. Parrot CK3100 works both Hands Free & Headset. What is your version of the Parrot CK3100? To find that out go to settings, Advanced settings on the Parrot & click on About . This will tell you what version Parrot you have.
Hey Jerry,
i'm using ther Parrot CK3300 with no problems apart for dialling from the parrot unit.
The rom on the Imate PDA2K is 1.22.00 WWE.
The Rom on the Parrot is the lastet Rom Version 4.10.
I get evething showing on the parrot display Network Signal caller id it work great>
I only which that it could dial from the parrot unit.
I've spoken to Parrot they are looing in to the problem up to now I have not find a solution.
Regards
Gigino
To dial from the Parrot you must have this as your phone #"15554445678"
I had to change all my telephone numbers to this format to work. If you have 1 (555)-444-5678 this will not work from the Parrot . Use the top & it will work, I guarantee it 100%. This was on there forum several months ago before they changed there format on the forum. Remember no dashes or ( ) in the telephone number & country code in format 1 for the USA. Go for it.
Hi jerrycans
i previouly posted as guest
The parrot 3100 version is 4.05
i am 99% sure that is is connected as Handsfree, as i it stays connected all the time, where as on the XDA2 it only connect upon incomming call and the screen says 'Headset'
Whereas on the pda2k as i say connected constantly, says 'network ok' on the screen, i can dial out via the parrot, but contacts are not available!
as for the imate it is the latest rom from club imate
ROM ver: 1.22.00 WWE
ROM date: 10/22/04
Radio Ver: 1.06.00
Protocol ver: 1337.38
ExtROM: 1.22.162 WWE
using broadcom BT-PPC/PE version 1.0.0 Build 3500
jerryjans said:
Guest what are the sme things on your device that I asked Hugot? If you are using the latest rom version from Imate then you are using the headset version of the Parrot CK3100. Parrot CK3100 works both Hands Free & Headset. What is your version of the Parrot CK3100? To find that out go to settings, Advanced settings on the Parrot & click on About . This will tell you what version Parrot you have.
Click to expand...
Click to collapse
HI Searly: To dial by the parrot use this setup: 15554445678 for the phone number. after you Parrot is paired disconnect the Parrotin sttings. Go to contacts, Highlight as many as you can, right click on the highlighted contacts & pick send by Bluetooth. .it will search for the Parrot ,& fibd it ,click ok & send, do this until all your contacts are sent.. Reconnect the Parrot & you can dial from the Parrot. Parrot just came out with a new ypgrade I will have to flash mine to the latest revision. I wrote to Widcomm & they know that this is a known issue.
Hi
i have just upgraded to the latest parrot firmware, little difference, i think most of the changes relate to other handsets
i did figure out the problem with contacts, i was using 'beam' this does not work!
i use pocket informant, and selecting the contacts, then goto extra 'send via bluetooth' this automatically kills the handsfree conection sends the contacts the reconnects
caller ID all works well, but the phone numbers have to be entered without spaces etc
all in all i am quite please, certainly glad i upgraded from the imate ppc!
jerryjans said:
HI Searly: To dial by the parrot use this setup: 15554445678 for the phone number. after you Parrot is paired disconnect the Parrotin sttings. Go to contacts, Highlight as many as you can, right click on the highlighted contacts & pick send by Bluetooth. .it will search for the Parrot ,& fibd it ,click ok & send, do this until all your contacts are sent.. Reconnect the Parrot & you can dial from the Parrot. Parrot just came out with a new ypgrade I will have to flash mine to the latest revision. I wrote to Widcomm & they know that this is a known issue.
Click to expand...
Click to collapse
I also have the parrot ck3100, but I don't need anything of what you say.
But I am not able to see, the covering, neither the operator??.
Another thing, you get him to be linked alone when enter to the car. Is this, the BT on, then turn on the car, and its connects directly to the pda ?¿?¿.
Greetings
MA
Hey Jerry,
thanls for you help but I have tryed as you said but it still does not work.
I had a look at my pda and notice that I could not dial from the keyboard also.
Then I tryed something I hard rest my Imate PDA 2K and tryed it, it all works fine. So I reinstalled all my software one at a time, took me ages.
Find out the the software that was causing the problem was the intellidialler.
I do not known if anybody else has the same problem but if you have not install the intellidialler do not install it it cause problems with the Parrot bluetooth and stop you dialling from the keyboard.
Hope this information well help someone.
Cheers
Gigino
Hi everyone,
I have been searching and reading through all the bt and headsets posts today with no result, my XDA IIi connects to the bt handsfree divices, but when calling are receiving a call there is only a small noise but I can not hear anything else. Can anyone help? I have two devices: a Vivanco BT65s and a Eagletec headsets and neither one works!
Thanks!
Rom version: 1.11.00 WWE
Radio version: 1.00.00
ExtRom version; 1,11,923 WWE
BT: Broadcomm 1.0.0 Buid 3900
Hi Bern,
Unsure whether you solved your prob already, but I'm running BCHS_FOR_POCKET_PC_OZONE.ARMV4.zip software, found in a magician thread, for more BT functionality and my BT earpiece works fine. Never tested it without this software so you can always give it a try.
Cheers, M
Can you do a link to where that file is please as I can not find it using the search function. Thanks
Nope,
Due to the limitations of PIE can't do it. It is in the first post of this thread though ;-)
http://forum.xda-developers.com/viewtopic.php?t=33532&start=0
Have fun, M
Ok, I am trying to connect the ht820 stereo headset with my wizard but it will not play sound through the headset. I have the Cingular 2.08 Rom Loaded under bluetooth devices when I "refresh" it shows Headset and Handsfree. I have tried selecting both, and even a combination with no luck. The voice dial/phone functions of the headset work but not when I play music. I know the headset works because it plays music on my bluetooth laptop. Am I doing something wrong? Please help!
press the right ear button, and it will sync the phone to the headset, and start playing the music through the headset.
right button doesnt do anything when I press it. When I press left button it goes to voice speed dial.
Checked Bluetooth settings - Both Headset and Hands Free are Checked.
Any ideas?
wireless stereo needs to be enabled. does your ROM verson say 2.8.7.11? if not, you don't have A2DP.
hmm thats weird, during loadup OS reports 2.17 but i installed the 2.08 rom.??
Thanks for pointing that out to me though, I assumed since I installed the 2.08 rom it was running 2.08 wit a2dp.
i have 2.08 and the motoroma ht820 does work....somehow. I mean that i get evrw 20-50 secs interruptions for a fraction of a sec....the same to you? i tried various things (including Hard resets) but no success...
on 2.08, indeed, the bluetooth allows to have stereo headset, and the right earpad button does the rest.
Music through Bt ear bud
ok, i upgraded to new rom 2.17, this rom is excellent, battery life was beyond terrible before, now it is nothing short of OUTSTANDING... :lol:
Question, does this version support music through Bt earbud? I'd really like to have that feature... :roll:
Question, does this version support music through Bt earbud?
Click to expand...
Click to collapse
Some clever people have worked out how to extract the files for a2dp and install them into wizards, prophets etc.
See the thread in the main Wizard forum here: http://forum.xda-developers.com/viewtopic.php?t=48535 which direct to another post to download the files.
I have this working on my k-jam using wwe 1.16 rom and its great.
Cheers
My Jabra BT500 works great, the CK3100 has nothing but trouble Parrot US support is being particularly unhelpful - curious if anyone has made it work or not.
This the stock AT&T Tilt ROM with the retail shipped VC 1.6.
Richard
the parrot itself is working for me, but my stereo (06 Saab 9-3) doesn't play well. VC does work, just not great but I believe that it's due to my car. I'm just using the Parrot's voice command
spartanrob said:
the parrot itself is working for me, but my stereo (06 Saab 9-3) doesn't play well. VC does work, just not great but I believe that it's due to my car. I'm just using the Parrot's voice command
Click to expand...
Click to collapse
Yeah, that's Parrot USA's "solution" - but MS Voice Command is soooooo much better I can't go back. I'll literally change BT car kits first
Did your Parrot work with other phones previously? My CK-3100 in this car ran great with my Hermes/8525 - the Tilt sets it atwitter though.
Richard
My parrot has been consistent among all phones, it's really more of an issue with the stereo in the Saab. Ask me again in 6 months when my lease is up and I move the parrot to a new vehicle
My CK3100 works fine with TyTN II and Voice Commander 1.6
"What is my battery level" , "What song is this" etc
...very cute !
eegboplegin said:
My CK3100 works fine with TyTN II and Voice Commander 1.6
"What is my battery level" , "What song is this" etc
...very cute !
Click to expand...
Click to collapse
Would you mind telling me some things about your setup?
Sounds like you're running the stock HTC ROM?
What revision Parrot firmware are you on?
What's the full version of your Voice Command? 1.6.xxxx <- what's the xxxx
Stupid but obvious question - have you tried making a voice-dialed call and then trying another VC operation? E.g. press Green button on parrot, "Call voicemail at work" have call progress, press Red button on parrot, wait a moment, then press Green button again and try something like "What are my appointments tomorrow?"
Thanks a million!
Richard
when you say it works well, does that mean that sound is routed through carspeaker?
when I press green button and say 'what time is it' I get the answer only through Tytn loudspeaker
Let me give a tip I found for my Parrot CK3000 & VoiceCommand.
If you have any voicetags in your Parrot... it won't pass the ball to VoiceCommand.
So I just wiped its memory (it's Green+Red on mine) then just paired it once more with my kaiser, and stop here! (do not save any contacts/voicetag in the kit)
At this point, when you'll press the Green button, it will get the VoiceCommand prompt
thanks Sebbes (I did that already).
But will the audio be routed to the carspeaker?(or still through the phones inbuilt speaker?)
VoiceCalls : yes (VC invit, and your actual calls)
Any other audio : no (like GPS voices etc)
I have installed two versions of 1.6 on my Tilt. The newest one fixes the announcements but seams to break BT voice command.
The announcements don't work on the older one but BT voice command does.
I will live without announcements...
Later, Lew
P.S. Working BT Voice command v1.60.4622.0
lewcamino said:
P.S. Working BT Voice command v1.60.4622.0
Click to expand...
Click to collapse
Thanks, which Parrot kit and which f/w revision on it?
Richard
Hello!
Using the TytnII with MK6100 - I'm experiencing frequent disconnections between the phone and Parrot handsfree unit. The disconnection never happens while in a call, only when phone is idle.
TytnII ROM Build: 19209.1.0.2 WWE
Radio: 1.65.14.06
Protocol: 25.81.40.02H
Parrot version: Latest
Any suggestions?
Thanks!
Many handsfree units "sleep" after a certain amount of time (power save), i usually have to reconnect/wake up mine when i want to use it, by pressing the call button on it.