Database Develop

How to check if Unlock has worked

Hi all,
Being new to this and knowing what could happen to your phone, I want to know if you can check if LokiWiz has worked.
Yesterday I tried if the sim lock was gone and it has, but what about the CID?
Please let me know if it is possible to check.
Device specifics:
Qtek 9100, via Vodafone NL.
ROM1.3.7.10 NLD
ROM Date: 9/29/05
Radioversion: 01.04.10
Protcolversion: 4.0.13.17
ExtRom version: 1.3.7.8012
Thanks,
Bas

Did you use LokiWiz for only unlocking your SIM or also for CID?
SIM and CID unlock are both different options in LokiWiz.
You can check if SIM unlock has worked by changing SIM card and
you can check if CID unlock has worked by upgrading your device to the latest ROM (that's the only reason why anyone would CID unlock their device ).
Good Luck.

I did both.
I did a SIM unlock, and the test worked out fine. I swapped cards with a collegue who has a T-mobile card. Worked.
I did also a CID unlock. But I don't know if that worked. Is there a way to test. Or can I go and duo the upgrade. Does that one check if the CID is gone?
Thanks in advance for the answer.
Bas

Errm ive neva done an upgrade but if your CID is not unlocked i would assume the phone would turn into a brick....but remember thats an assumption :!:

Guys,
I just did the jump at the deep end and ....... kept swimming. :lol:
The upgrade went well. At the moment I'm reinstalling all my software.
Thanks for the answers.
Bas

SIM Lock on Cingular 8125

Hi All,
I unlocked my device (cingular 8125,wizard), changed cid with spv services to 11111111, updated my rom after. this worked fine, but when I restart the device it appears the sim lock window.
now I Have :
ipl 2.25
spl 2.25
gsm 02.25.11.1
I tried with lokiwiz 02/03 to get the new code but it appears a crazy code in the dos box. See please attached file. Does anybody know what is wrong ??
Can anybody help me ? I can´t use my device at this time.
Thank you

Slight Problem with the flashing

I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?

MSSH said:
I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?
Click to expand...
Click to collapse
download WST TOOL from the link below and apply to check the unlock staus of your phone,if it says locked again apply the method of unlocking correctly
http://forum.xda-developers.com/showthread.php?t=329170
Error:
'When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.'
I think you did not copied the Enablerapi.cab file in your phone correctly or executed it in there
good luck

Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok

MSSH said:
Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok
Click to expand...
Click to collapse
GRRRRRRRR8
Glade I was of any help,Happy flashing
Good luck

WM6_SIMLOCK_please help

Hi
I have a Qtek 2020 with WM2003 and a just install yesterday WM6 but I turn on the device put the pin and them appears a menu SimLock that said:
"Network is locked, please input unlock code"
What can I do to have my telephone?? PLEASE HELP ME.....
Thanks
Pb
Qtek 2020
TOPLOCK HIMA WM6 AKU.0.7.0
ROM VERSION: 6.00
ROM DATE: 09/08/2007
RADION VERSION: 1.18.00
Protocol version: 1337.38

check the himalaya wiki. Theres a page there about unlocking.

resp
hi
The instalation of WM6 dont remove the simlock off wall the Pdas?
What is the SimLock?
thaks
pb

search for a software called xda2Unlock

resp.unlock
hi
I found "all in one sim unlock tool" by "itsme" for XDAIIs.
Is this the software I need?
This will destroy the instalation of WM6 or the rom?
Thanks
pb

hi i had the same problem when i installed wm6.It said sim lock and told me to ask an unlocking code from my provider.I made a hard reset and everything was ok.Good luck.

arqto said:
hi
I found "all in one sim unlock tool" by "itsme" for XDAIIs.
Is this the software I need?
This will destroy the instalation of WM6 or the rom?
Thanks
pb
Click to expand...
Click to collapse
itsme's tool should do the trick. Unlocking SIM should have no effect on your installed WM6. In the unlikely event that it would harm WM6, just simply reflash.
But it's also very likely that you can just call your provider for the unlocking code. SIM lock is a way in which providers make sure to make money on "cheap" phones, the actual cost of the device is hidden in the cost per month or per call. Countries can have different laws:
-in Belgium the provider has to give you the unlock code when you ask for it, even if it's one day after purchase.
-in the Netherlands the provider should give it after 1 year (if you ask for it)
Once you've unlocked, you can shop for the cheapest provider. If you don't you keep on paying for a device you already paid...

Sanity Check - Still CID Unlocked?

So I've upgrade my old 8125 successfully - got a new one due to a second USB port coming off main board. This new one is a slightly newer model - T2. Anywho - Was running Lokiwiz to CID and SIM unlock. Successfulyl Sim unlocked - also THOUGHT i successfully CID unlocked it (based on the progress of the program - all the way through auto hard reset),
but apparantly I didn't (as confirmed by the MTTY tool telling me I don't have sufficient privelages to create image of rom and an invalid Vendor ID error upon tmobile rom RUU). Also i get the familiar "fat format failure" message at the option screen when hard resetting.
So i can flash the heck out of the device with old and new Cingular roms as well as the TouchFlo and Touch Diamond roms but the only thing that changes after successful flashing is the splash screen and depending on the ROM the IPL/SPL number. The device remains frozen and hangs on the Boot Loader screen.
So in attempt to get this thing up and running i need a sanity check.
Mmy first question is
1) Based on info above would you agree the device is still CID unlocked?
2) Is there (cuz I can't find one) a utility besided IMEI unlock to get into the phone and CID unlock it through the RBG boot loader screen?
3) Since I UNSUCCESSFULLY CID unlocked the device using Lokiwiz in the first place - I still have the output file from Lokiwiz - is there a way that the IMEIUNLOCK progrogram from IMEI UK can read this binary file and unlock the device or do i just need to pony up the 40bucks and CID unlock this.
I can't think of another way to get back to a functioning device.

Additional Thoughts
I also had a thought - which is probably an impossibility - but is there any way if I get the IMEI unlock code from Cingular to somehow get it into the IMEI Unlock software or use some other program like MTTY to insert that code into the phone?
DAMN! - I still don't know how the CID unlock didn't go through the first time. -Maye it was because the rom didn't roll back.

BRoke Down
and purchased IMEI unlock - unlocked just fine. Now I was able to upgrade to the Tmobile rom- INstallation went through without a hitch- now I am stuck on the Tmobile Boot loader- WTF can't I get past the boot loader on any rom I use? This makes no sense. Anyone have any thoughts? IPl and SPL at this point both show 2.26. THis is really pissing me off.

Try using the SD method to create a OS ROM dump and restore it. Some people works with it.