Related
Hi,
I've done a lot of reading through this board on upgrading the wizard.
So far i managed to sim unlock, CID unlock, unlock extended and backup my original roms with the tools provided on FTP (awizard etc).
Still I have a problem with upgrading my ROM(s):
If i use one of the .exe (self exe RAR) ROM versions my Activesync stops, the device kind of restarts in a green/red/blue screen with usb at the bottom. After a while the upgrade program tells me I have a 260 error (Update error). Every time I have to remove the battery and restart the device. And it comes back with my original system....:-(
Seems I cannot upgrade the device or I am doing something wrong...
Same thing with all versions and even the radio ROMS
There is a possibility to upgrade with Awizard but i dont have the decrypted version of any Rom. I only have the nk.nbf files or total .exe packages. Awizzard wants a decrypted .nba file which I don't have.
I woul like to upgrade my OS and radio roms but cant figure out whats wrong here...
Can anyone help me out?
Currently running:
IPL 1.0.3
SPL 1.0.3
Radio 1.4.10
ROM 1.3.2.3 NLD
TNX in advance,
steven
Are you sure you unlocked the CID? you need to hit "c" instead of "u" at the dialogue during the unlocking..
Seems to me that I unlocked the thing, here's the output:
If I do it again Old and newdata are the same
*********************
* Please Choose one of the following options:
e - Enable RAPI
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
m - Modify OS nba file (To be released soon)
x - Extract contents of nba file (To be released soon)
r - Write Radio ROM to device (!! RUN unlock 1st !!)
w - Write OS ROM to device (!! RUN unlock 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:u
* Please connect your Wizard to the PC with USB ActiveSync connection,
* then press [Enter] to start, or q to main menu:
Initializing........CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
MachinaGod lokiwiz
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=92: f18b8326 - fbf46456dce0d0e5
Key idx: 92
olddata: 3e5a9da0d509e3be4042bbc17eb91f20621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=47d6a486 encsum=1c548b5bc9987dd1
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to restore your device if an
ything goes wrong.
* Press [Enter] to continue
mm, got the same problem over here. After i flashed (succesfully) from vario to qtek rom i cant install any other roms. Activesync simple disconnects when running the .exe roms files.
done so far
- hard reset vario
- reset computer
- hard reset vario with empy extended rom
- reinstalled activeSync
I'm trying to apply the latest imate rom over my UK Vario and have the same problem - as soon as the bootloader appears on the device, Windows drops the connection to the phone and the update fails.
Any ideas?
You can try this maybe
1) Start phone in bootloader (hold camera button and press on)
2) DO NOT allow USB connections for ActiveSync
3) Attach the USB cable to PC and PDA
4) Start ROM Update (So just doubleclick the .exe file)
5) Click next 1 or 2 times and try to flash the damn thing
Good luck boys and don't forget to post your results
Thanks for the suggestion, but it didn't work.
As soon as I connect the usb to the pc and phone, when the device is in the bootloader screen, Windows detects an "unknown usb device" and prompts for drivers. I doesn't find any/I don't have any, and so the device isn't connected properly. Subsequently, the RRU utility can't talk to the phone
I read some other post where someone first downgraded his qtek 2.x firmware to a 1.x Qtek (same brand) and then unlocked and upgraded to another brand firmware.
I've got mine to work - it's the cable! The cable I was using was ok to sync with Activesync, but wasn't USB2, and so the bootloader didn't work with it.
Having now upgraded, the old USB sync cable doesn't even work with Activesync, so cable matters!
I was attempting to flash my ROM to wm6 crossbow, I used Lokiwiz 02b to CID unlock my G3 wizard. Then, I attemped to flash the rom using the RUU. The Shelltool .exe never finished flashing the rom (even after 1.5 hours), so I disconnected the USB and tried to re-sync Windows Mobile Device Center (using Vista 32) as per the directions, but it would not detect the phone. I then entered bootloader mode and tried to run the RUU that way, but vista crashed the program if no sync connection is found. So, I downloaded the latest t-mobile ROM, and flashed the phone through bootloader (curiously the flash seemed to work using t-mo's RUU) and it installed to 100%. However, the phone will not get past the white splash screen. This is what it displays:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
I tried to un-rar the tmobile exe to a new folder and replaced the nk.nbf file with the file from the crossbow ROM. The t-mo RUU wouldnt read it properly and it crashed. Now the phone is sitting on my counter with it's battery pulled out for fear it mat discharge completely. Since i can get into bootloader mode with the "USB" display at the bottom, I know the device isn't bricked, but what can I do to get it up and running and hopefully flashed to wm6 crossbow? Thanks for any help!
snootch said:
I was attempting to flash my ROM to wm6 crossbow, I used Lokiwiz 02b to CID unlock my G3 wizard. Then, I attemped to flash the rom using the RUU. The Shelltool .exe never finished flashing the rom (even after 1.5 hours), so I disconnected the USB and tried to re-sync Windows Mobile Device Center (using Vista 32) as per the directions, but it would not detect the phone. I then entered bootloader mode and tried to run the RUU that way, but vista crashed the program if no sync connection is found. So, I downloaded the latest t-mobile ROM, and flashed the phone through bootloader (curiously the flash seemed to work using t-mo's RUU) and it installed to 100%. However, the phone will not get past the white splash screen. This is what it displays:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
I tried to un-rar the tmobile exe to a new folder and replaced the nk.nbf file with the file from the crossbow ROM. The t-mo RUU wouldnt read it properly and it crashed. Now the phone is sitting on my counter with it's battery pulled out for fear it mat discharge completely. Since i can get into bootloader mode with the "USB" display at the bottom, I know the device isn't bricked, but what can I do to get it up and running and hopefully flashed to wm6 crossbow? Thanks for any help!
Click to expand...
Click to collapse
Well Friend I hate to say it but Using Vista is your problem... The drivers in WMDC are different from those of activesync and thus Vista cannot talk to your phone in bootloader.
Follow this thread here:
Updated!!(10/20/2007) UPGRADE YOUR PHONE WITH WINDOWS VISTA!!! PROVEN METHOD!
Once you complete the steps in that thread, flash the Official T-Mobile Rom. I will be online for the rest of the night so I will walk you through everything if you would like me to. My AIM, Yahoo, and MSN messenger addresses are all at the top of every one of my posts.
First off, let me thank you for your help, as well as the time you have put in the community helping people like me. I had updated the driver before, but I guess several attempted flashed had overwritten the driver. Just now, I followed the link you gave me, updated the drivers, and flashed the T-mobile 2.26 ROM. The problem still remains. The RUU goes to 100%, shows me the finish/exit screen, mu wizard restarts, but hangs at the white boot screen and does not go any further.
Anyone? Need to get this phone up quick, as I am starting a new job soon and need the capabilities. BTW, i'm going to put XP on this laptop in dual-boot and see if I can get the t-mobile ROM to load fully using XP.
snootch said:
Anyone? Need to get this phone up quick, as I am starting a new job soon and need the capabilities. BTW, i'm going to put XP on this laptop in dual-boot and see if I can get the t-mobile ROM to load fully using XP.
Click to expand...
Click to collapse
If you can manage that, you will be set. All you have to do is create a hard drive partition and install xp to that partition.(from what I know anyway)
OK, i'm gonna try that (my internet is dropping every 5-10 secs, so it'll take a little time) I do have one question though- Last time I used Loki's unlocker, I unlocked the SIM, then the CID unlocker. After the CID unlocker, it locked me out of the phone. The OS wouldnt load unless I provided an unlock code. Then i reflashed it, then the problems started. I think i didn't have it CID unlocked properly. Plus having my miniSD in the slot probably didnt help things either. I've read the directions several times, and I dont see what i'm doing wrong. Could you maybe shed some light on what i'm doing wrong? Thanks!
EDIT: Also, I forgot to mention that I tried to do a hard-reset (hold wireless manager + voive command buttons + soft reset) and when you press the send button, it tells me unable to format FAT volume or something like that. Upon reading around, it seems like i'm having the exact same problem as this poster: http://forum.xda-developers.com/showthread.php?t=338315
snootch said:
OK, i'm gonna try that (my internet is dropping every 5-10 secs, so it'll take a little time) I do have one question though- Last time I used Loki's unlocker, I unlocked the SIM, then the CID unlocker. After the CID unlocker, it locked me out of the phone. The OS wouldnt load unless I provided an unlock code. Then i reflashed it, then the problems started. I think i didn't have it CID unlocked properly. Plus having my miniSD in the slot probably didnt help things either. I've read the directions several times, and I dont see what i'm doing wrong. Could you maybe shed some light on what i'm doing wrong? Thanks!
EDIT: Also, I forgot to mention that I tried to do a hard-reset (hold wireless manager + voive command buttons + soft reset) and when you press the send button, it tells me unable to format FAT volume or something like that. Upon reading around, it seems like i'm having the exact same problem as this poster: http://forum.xda-developers.com/showthread.php?t=338315
Click to expand...
Click to collapse
Although,many have successfully flashed using vista,but I'll suggest in your condition flash through WinXP. Download the official carrier's Rom from it's website.
1. Disconnect your phone from the usb cable,shut down any firewall,disable any Anti virus,Reboot your PC.
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. On your PC Open windows Task Manager...>Tab Processes...>wescomm.exe...>End process
4. Power off the phone completely (Not stand-by,shut off completely),or you may take the battery out for few seconds
5. Make sure your phone is not Connected to the PC via USB cable and remove the dummy Sdcard or mini-Sd card
6. Get your phone into Bootloader mode (Multicolor screen) by pressing camera button + Power on button
7. Reconnect your phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Be sure that your battery is charged over 70%)
8. "USB"will appear on the bottom of the screen of the Bootloader (Multicolor screen)
9. Run the Upgrade again and it will work fine without any problems.
10.Never use Bluetooth sync for the Upgrade
While upgrading, the ActiveSync program will not go on, however the upgrade is running.Please be patient when you're flashing your device, even if 98%. It can wait a little bit, 5 ~ 7 minutes.
Don't cancell the flash or get the phone off the usb cable till it confirms "Congratulations" or stops with an Error!!!
Hope it'll recover back to it's default status,good luck
I'm going to assume I don't have to CID unlock it until I want to switch from the T-mobile 2.26 ROM? I am about to install XP dual-boot shortly. I'll post my results when it's done. Thank you.
snootch said:
I'm going to assume I don't have to CID unlock it until I want to switch from the T-mobile 2.26 ROM? I am about to install XP dual-boot shortly. I'll post my results when it's done. Thank you.
Click to expand...
Click to collapse
As long as you are going to keep T-Mobile 2.26 on your device or are restoring T-Mobile 2.26, you do not have to CID unlock but should you decide to change to another Rom, you will need to CID unlock.
Good luck on the dual boot. There is a detailed tutorial in my Signature if you would like to take a look at it. After I can restore my crashed laptop, I am going to take care of the dual boot also.(I have to do it again... )
I really want to put WM6 on my wizard, and customize it the way I want it. Do you have any favorite WM6 ROM? All day yesterday I spent trying to add a WinXP partition to my Vista laptop. Not fun. First, I shrank the only partition on the drive (where Vista is installed) using Disk management, the Diskpart.exe to create a new 2.5Gb partition to install XP on. I rebooted the labtop with a XP disk, and installed XP on the partition. After the laptop restarted the first time, it did not come back up (black screen, no CD activity), So I changed the boot options in BIOS to HDD, and the Vista partition responded with "Error loading operating system" on a black screen. So now, i've got a laptop with a corrupted Vista install, A partition with partially installed XP on it, a XP disk that just quits working, and my wizard is shot. Normally something I can deal with if I had my desktop, but unfortunately my entire house is packed up in storage, i'm living in a hotel, and the laptop and phone are all i've got. SO, against my better judgement, I went to the store and bought a Vista home basic upgrade DVD to fix my vista partition, and now i'm back on the net- and going to try anothe XP disk. Whew- what a pain in the ass.
snootch said:
I really want to put WM6 on my wizard, and customize it the way I want it. Do you have any favorite WM6 ROM? All day yesterday I spent trying to add a WinXP partition to my Vista laptop. Not fun. First, I shrank the only partition on the drive (where Vista is installed) using Disk management, the Diskpart.exe to create a new 2.5Gb partition to install XP on. I rebooted the labtop with a XP disk, and installed XP on the partition. After the laptop restarted the first time, it did not come back up (black screen, no CD activity), So I changed the boot options in BIOS to HDD, and the Vista partition responded with "Error loading operating system" on a black screen. So now, i've got a laptop with a corrupted Vista install, A partition with partially installed XP on it, a XP disk that just quits working, and my wizard is shot. Normally something I can deal with if I had my desktop, but unfortunately my entire house is packed up in storage, i'm living in a hotel, and the laptop and phone are all i've got. SO, against my better judgement, I went to the store and bought a Vista home basic upgrade DVD to fix my vista partition, and now i'm back on the net- and going to try anothe XP disk. Whew- what a pain in the ass.
Click to expand...
Click to collapse
It's better if you use 'PartitionMagic' software to create partition and install WinXp,as it has much advanced features as compared to built-in Disk Management.It also has the option to create a partition in the same one partition to install new OS.
I tried that first, too bad it doesnt work in Vista.
Woo Hoo!!! Success!!
Alright! I got it fixed! What I did:
1- Spent $42 on a CID unlocker from: http://www.imei-check.co.uk/m3000unlock.php
After i recieved the files from the via email (about 10 minutes) I ran their unlocker program with the file they emailed me. This CID unlocked the wizard.
2- I flashed button's ROM: http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
I had to flash it twice until it showed a IPL/SPL of 1.01
3- Followed this post: http://forum.xda-developers.com/showthread.php?t=276963&highlight=splash+screen+freezing
(make sure you use a blank SD card, as it will require you to format the card to make it useable again after your'e done)
4- Remove battery, and restart phone, BOOM! Button's ROM works fine!
5- Now upgrade to any ROM you like (WM6 etc.)
snootch said:
Alright! I got it fixed! What I did:
1- Spent $42 on a CID unlocker from: http://www.imei-check.co.uk/m3000unlock.php
After i recieved the files from the via email (about 10 minutes) I ran their unlocker program with the file they emailed me. This CID unlocked the wizard.
2- I flashed button's ROM: http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
I had to flash it twice until it showed a IPL/SPL of 1.05
3- Followed this post: http://forum.xda-developers.com/showthread.php?t=276963&highlight=splash+screen+freezing
(make sure you use a blank SD card, as it will require you to format the card to make it useable again after your'e done)
4- Remove battery, and restart phone, BOOM! Button's ROM works fine!
5- Now upgrade to any ROM you like (WM6 etc.)
Click to expand...
Click to collapse
Congrats ! that's the easy way.....
Yeah, I got tired of screwing with it, and I did it all in Vista!
My Blue Angel Activsyn Is Not Recognized By The Pc For A Reason I Do Not Know , Tried Many Times Hard Reset Soft Reset , Mtty Tool
Bootloader Mode Nothing Is Working If Any One Has An Idea How Can I Upgrade Or Even Re Falsh The Same Rom I Will Appreciate It Thanks
mohannad18 said:
My Blue Angel Activsyn Is Not Recognized By The Pc For A Reason I Do Not Know , Tried Many Times Hard Reset Soft Reset , Mtty Tool
Bootloader Mode Nothing Is Working If Any One Has An Idea How Can I Upgrade Or Even Re Falsh The Same Rom I Will Appreciate It Thanks
Click to expand...
Click to collapse
You MUST flash via sync, there is no method available to flash from SD card. Are you using XP or Vista? There is a known issue with Vista not liking the BA. Are you manually putting the BA into bootloader mode then placing in the cradle or trying to do it some other way? The method that works 100% for me is to manually put in bootloader mode (power+reset+record), this gives me a screen that says Serial at the top and a version number at the bottom, there is no backlight and when I then place it into the cradle Serial changes to USB. At this point on the computer run MA_Upgrade and everything should work. Keep in mind that I will never use Vista so if you are the YMMV.
will i could manually go to bootloader mode but the time i place device on cradle " unknown device" appears and running the maupgrade.exe leads to blank upgrade rom version several times i have done it ??? any suggestions
i have windows xp , activsyn 4.5 , bootloader ver 2.06
mohannad18 said:
will i could manually go to bootloader mode but the time i place device on cradle " unknown device" appears and running the maupgrade.exe leads to blank upgrade rom version several times i have done it ??? any suggestions
i have windows xp , activsyn 4.5 , bootloader ver 2.06
Click to expand...
Click to collapse
As silly as this sounds, try a different USB port. Also make sure you are directly connected to the computer not via a USB hub.
tried more than one computer for connection and more than 4 ports still i got the same " usb device not recognized"
mohannad18 said:
tried more than one computer for connection and more than 4 ports still i got the same " usb device not recognized"
Click to expand...
Click to collapse
Try a different cradle/cable.
The time I had this exact problem, it turned out of be a broken wire in the data cable.
i bought another cradle still i hvae the same message " usb device is not recognised"
Hrmm... I'm going to throw out a few ideas to look at. Some probably don't apply since you tried this on another machine, per your post, but it can't hurt in regards to this issue...
Try uninstalling activesync, reboot, reinstall, reboot. The 'drivers' that are used are installed with activesync.
If you have any 3rd party USB drivers, try reinstalling them.
Disable 'advanced network functionality' on the phone
Backup your phone and hard reset
Do you have anything that monitors the USB port on the machine you are trying to do this on?
Make sure you are using activsync 4.5 or newer. Other than that and what you already read here I can think of nothing.
i have tried so many versions of activesyn 3.x-4.5 with reboot each time of installation ,advanced network diabled, still the same thing " usb device not recognized"
sorry for inconvenience what is usb moniter machine??
BA - Does the activesync (3x-4.5) - work via bluetooth 4 U/G's ?
Angel - Does the activesync's (3x-4.5) - work via bluetooth 4 U/G's?
(no cradle / no usb) , but file transfere's work ok, via BT exchange folder (paired)
for running the ====#====#===#XDATools#==#=== & the #====#====#====#special_rom_1.2.exe#==#
angel of the ph20b
1.31.00 wwe
rom 12/13/04
1.06.00FM
1337.38,
ext rom 1.31.139wwe - flavours
my BlueTooth is belkin F8T008 (belkin say it uses comm4) - (BlueAngel say it uses - in comm5 / out comm 6), & activesync4.5 says (no-way, even adding ports, then removing all under comm9 etc)
(if I could run them from midlet, from sd say )
ASK B4 U TRY ??? (101/Flash4dummies/NewbiesTube . . . .YouNube? where ()not the wiki() - Im getting to be a silver surfer, already!
followed a few tutorials, none look like my sp3, on xp-pro, I also have no outlook, etc (no excel, - NO office!), but I only came for a soft-key fix/addon = 4midlet's)
tried removing the pair'ings from regedit(then regclean). Oh and when running activesync from BA, I cannot even get a PC (discoverable 'n all devices 'n all services ect
and breathe!
Oh and any reply's would be gratefully received, B4 '2010', that is -
shame the bolt that was shot, was just too soon, so no score for the aim, though! -
usb activesync problem
usb activesync problem
ignore the previous post - cannot connect to activesync via bluetooth!
radio upgrade worked !!!!!!!!!!!!!!!!!!!!!!!!!!!
special_rom_1.2.exe, unzipped to a xdatools folder
running start.bat, after activesync's finnished sync-ing
in the dos window I get a get device error
and
error 011:execute remote comms prog error
I'm VNese, my level of Eng is poor. but I think u should check your USB port. Do u use full of usb port? may be, the power in USB port is low -> error. Or hardware(USB chip) is bad. check more
Shot in the dark but I had the same problem with a friends 6700. I found out that the antivirus/firewall/internet security suite was blocking the proper ports needed to connect. When I disabled the software for a moment, attempted a sync it would work, then I could turn the software back on and be fine. If I disconnected and reconnected it would only charge. Give that a whirl.
HELP PLEASE!!
Ok so i think i bricked my wizard!
I have the t-mobile MDA wm5 unlocked g3.
I've flashed it to the WM6 Rom and everything had been working well, except there was no MMS feature on the phone at all which sucked! . My girlfriend thought it would be better if she did the "windows mobile update" icon feature that was on the phone to speed up the phone....She downloaded the updates & my phone shut off!! When it rebooted everything seemed normal...
1st.
T-mobile screen
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 10.1.0.811
-Then i get the green windows mobile splash screen, but after i get an error message!!
*Device Authentication*
“Device authentication failure. Please contact the product manufacturer. For reference, please provide your device ID.
3563820017905901 38000050bf3f5173”
Ive tried to boot in safe mode to try & flash my phone again but for sum reason my computer wont recognize my phone is plugged in! What do i need to do?!? Please help, any help is thankful!
is not a bricked wizard men
easy men easy... but please tell to your girl dont push everything that she dont nderstands... Everybody knows that upgrade official is only for original OS like windows XP or VISTA..
Firs of all
Put your Wizard on bootloaders mode... plug in via usb the PC Active sync wont recognize your phone.. then run the original shipped Stock ROM and then your Coocked rom...
But if the PC at the same time you place your Device on Bootloaders and plug it via USB... shows a pop up message that said Windows cant recognize your device or unknown device or something... Restart your Pc... Hard reset your PDA... and replug your Device as I said it before... if not check your USB cable maybe a broken cable failure...
IF NOT?????!!!!!!!! then Use another PC with XP!!!!!
If it still on his not reconized message you are in serious problem but your girfriend Too...
Good luck
Easy..."Device Authentication failure" is caused by your ROM. Just flashing another custom ROM and the message should go away.
I'm surprised that the chef that made your WM6 rom left the Windows Update feature in there, it was bound to crash a cooked rom, since the update service never worked properly anyway.
I'm sure flashing another rom will resolve this.
yeah, flash the rom (you might want to try WizFlo 20273 v6.1.1.3 - i'm on it, and loving it). heck, you can even do a hard reset and that would probably resolve it.
Hi I from CZ and I have problem with my MDA III
what can I do ? please
"bootloader doesn't work and master reset too doesn't work" please help i dont know how to flash i was read much tutorials there but I not found a right tutorial please help me I dont know what i can do I form CZ and my mail is [email protected] ( kdyby nekdo z CR na to narazil tak mi prosim napiste a domluvime se na icq treba klidne kdybych to rozjel tak poslu i nejake penize nebo tak akorat mi prosim napiste co nejdriv ve stredu jdu jinak do servisu ale tam to bude stat hodne ) (this is PH20B
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Chef_Tony said:
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Click to expand...
Click to collapse
I want go to bootloader menu but is dont work I press Power +record+softt reset with stylus but it doesnot work and when I conect MDA with cabel to COM this cable in not USB and active sync not found MDA and when I start update with exe it write me not found (sorry for my english) help me please ? can you write me more detailed tutorial what can I do for flash please what I must download and what I must do anywhere dont work download and i dont know where I can download any files
EDIT : Flashing is not compatible with serial cable ? I have this cable
Code:
http://www.i-obchod.cz/product.asp?productid=6663
this is to serial port (COM) when i buy this
Code:
http://www.easydevices.co.uk/pp/PDA_Accessories/Cradles/QTEK_9090_USB_SYNC_CRADLE.html
work it with this ? or it better when I go to service and pay 800kč this is about 25 Euro or 40 dollars and when I place an order this cradle i pay for this 18£ this is about 600kč and about 7days when it send me to home and I go to service tomorow but if I Flash it I not having to go to service
hi guys!
my ba also displays this strange message after an unsuccessed update (disconnected before finished). i have tried to install the update once more but it says: error 101: connection error. because i own my ba just since 20 hours, i don't know what to do now. so maybe someone could translate it into newbie-language. one more thing: unfortunately i use vista.
thanks for your help!
tried it once more with the new windows mobile device manager but my pc does not find my ba. vista just plays a sound when i put it on the cradle. i think you are the only ones in the hole www who can help me. need your help!
use maupgradeut_noid for upgrade
both of you read wiki there are solutions to your problems
maupgradeut_noid tells me this:
don't think that it is right.
hi folks!
i have tried it a hundred times with my vista mashine and a couple of times with xp on virtualbox but nothing. 15 minutes ago i have turned on my old xp mashine, downloaded the ROM from tmobile germany and started the application. it worked for me without maupgradeut_noid. only the original rom and nothing else. so my tip: don't waste your time with vista! xp is much better for solving this problem. thanks xp!
ok, but as i see it you didn't solve a problem but avoided it, and not even in the best way. i use vista too and i am unable to re-flash my device. the general problem is that the identifier of the device change over the flashing process, so vista downloads new drivers and cuts the connection. as i understand it, there is hardly any way to avoid that.
of course you do't need to use maupgrade_noid for an original rom, the _noid file is, as implied by the name, to avoide the device from identifying, so you could flash a WWE Rom to a rather locked german device.
as you might have realised, the picture you posted shows the magician and not the blueangel, hence the name Maupgrade instead of Baupgrade, which again is solved by the _noid version of the file and putting the device to bootloader first.
that the window does not show the versions from what version you flash to what version exactlyu doesn't matter at all. but as mentioned before, you should use an xp machine which will work like a charm!
am i to understand, that you have the latest official t-mobile rom on? the wm2003se?
as fast and battery friendly that might be, it is so out-dated and practically no newer third party software will be supported, like the fantastic application SPB Online, and the interface is incredibly ugly. if you ever want to try and flash your device again, try my tips above and it will work out just fine, as you seem to have mixed up a few things, but never mind.
i wish you best luck for trying again and will stand by for support, whether something might still not work out as planned.
good luck
Chef_Tony
well if you upgrade under vista take a look here
also look here for MAUpgradeUT_NOID and proper files - it is on the bottom of the page, so you only need the nbf files