Can't Install Radio ROM - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I'm stumbled... I'm trying to install the Cingular radio ROM found on this FTP site... it goes fine on "Checking Phone" blah blah but then it gives me something about connection errors.
Does anyone know anything about this? I can flash regular ROMs fine.

try to update the RUU program to a new version

Related

No Radio ROM version

Hi
i have been given a XDAIIs by O2 from a mate to try and correct the botch update he tried to do.
He Download the ROM update from O2's web site, run the install but something happened half way though the Radio ROM procedure and it failed.
Now there is No radio Version when GetDeviceData.exe is run and the Phone function dont work too.
I have tried to install the manufacture Radio ROM and various others, but they all fail.
My guess as there is no version on the ROM the install process falls over trying to determin what the current version is.
IS there a way around this?
If no one can help he will have to send it back under the warranty.
Doh best if i post it in the right place.
Lock/Delete plz

I-Mate K-JAM Radio

Hi guys,
I am guessing my problem is the fact that there is something wrong with the devices radio, more the radio rom.
I a while back flashed my dad's KJAM, and it all worked fine, he however has not used the actual phone part of the device since then, and now that he needs it, its not working.
The phone is not in flight mode, and it doesnt ask for a pin, as thats how he set it before I flashed it.
The phone keeps searching for service, and when I try to manually set the network, it keeps comming up with some or other problem.
The phone worked before I flashed it, so I am guessing it is the Radio ROM.
I am thinking of ugrading him to WM6, is this recommended at all? Which thread is best to follow for upgrading him to WM6?
His current details are:
ROM Version: 2.16.9.1 WWE
ROM Date: 2/6/06
Radio Version: 02.07.10
ProtocolVersion 413.1.03
ExtROM: 2.16.9.101
Any help will be appreciated.
P.S. I did just try to the radio rom that is on the xda ftp, for the wizard, I downloaded and tried to load the REAL_Radio_2.61.11 ROM, but that does not want to load for some or other reason, it first complained about the radio update util and said I must update or something, the second time I tried it was a communication error. I am using my JASJAR's USB cable, is this a problem at all?
Try to change the radio rom to 2.19 or higher but i recommend you to flash first the 2.19 if that fails then try more higher.. i guess 2.2x and 2.6x something like that... i forgot..
Ok, u got a link for me for those ROMS?
wait a sec..
If you search and read all the stickies thread you might encounter this one your self..
http://forum.xda-developers.com/showthread.php?t=268031
There at that thread have a varius radio roms to download..
goodluck!..
post the result afterward
Thanks...I didnt see that one...I will have a look...shot for the help...
Ok, ive tried a few different things.
I tried to get it to connect with activesync, but it just doesnt want to work, I have also attempted a hard reset, and activesync doesnt work either.
Before I did a hard reset activesync 'did something', and a message came up saying it couldnt get an IP address from the server, and on the PC activesync came up with some other thing saying it cannot connect to the Windows Mobile Powered Device.
After the hard reset, I try activesync again, and now absolutally nothing happens on the phone. On the PC the little network icon comes up aqquiring an IP address and dissappears, and the just sits there...
At this point I ran a exe file on the K-JAM, to put it into bootloader mode, I ran the update tool, and again it complained about the update utility, again not changing anything, I ran it, and then it gave a communication / connection error, and a third time also a communication / connection error.
I tried only one radio rom, I am going to try it with the oldest version on that page, if that doesn't work, then I don't know. I tried it with ActiveSync 4.5 and 4.2.
In the mean time I tried the original ROM file from clubimate, that actually loaded, and worked, except the network still isnt working.
I also tried syncing the phone on another pc, and funny enough that worked.
On trying to load the new Radio ROM, it started the update process, and at that moment the phone jumps to bootloader mode, obviously the activesync connection gets lost, the update tool waits a bit, and then suddenly complains about the update tool, saying I need a new version or something.
I have checked the bootloader version of the phone, and it is version 2.x.
I try it again and then I get a connection error....I really need to get my dads phone working again.
Any ideas?
Not sure which Radio's you are trying but go grab a Radio Only ROM. TMobile 2.19.11 UK seems to be a very good and stable one. These are found in the ftp area: ftp://xda:[email protected]/Wizard .
Hope that helps.
Thanks for the help.....ive tried 3 different ones from there, they all do the same thing...so its a bit wierd.....
On the other side of the coin I decided to stick on another sim card, and it works just fine on the other sim card
So the radio is working just fine afterall.....just got back from the service provider and they rekon either the sim card is damaged or its a network error....so lets see what happens.....
Thanks to everybody for the help...
lol..
so its just the simcard after all..
lol yeah....
Although I would still like to know why I can't update the radio anyway...
isnt it because of your activesync?
I don't know what it is...
I used it on another PC alltogether and activesync worked just fine...the update tool interacts with the device, starts the update process, and then the phone goes to bootloader mode, activesync obviously losing the connection, the update tool waits a while and then suddenly says something about the update utility being old or something, I need a new one or what ever....
Then while in bootloader mode I try the update again and then I get a connection error.
Its all wierd.....

Stuck in Bootloader Mode /-> ERROR [264, 274] : CONNECTION

HELP ME OUT GUYS, IM TRYING TO FLASH THE WM6 ROM TO A CINGULAR 8125: IPL 2.25, SPL 2.25 AND SEEM TO BE STUCK IN BOOTLOADER MODE. I FIRST GOT AN UPDATE ERROR AT 99%, PERFORMED RECOVERY - AND GOT THE SAME ERROR AGAIN. NOW THE RUU WON'T EVEN START AND I GET ERROR 264 : CONNECTION ERROR. ACTIVE SYNC NO LONGER IS GREEN, ETC. I DOWNLOADED THE XDA MOBILE 6r2a.zip FROM THIS SITE. NOT SURE WHAT I DID WRONG. I THINK I NEED TO GET BACK TO AN ORIGINAL ROM AND START ALL OVER BUT NOT SURE WHERE I CAN FIND ONE. THANKS.
ditto
ensophalic said:
HELP ME OUT GUYS, IM TRYING TO FLASH THE WM6 ROM TO A CINGULAR 8125: IPL 2.25, SPL 2.25 AND SEEM TO BE STUCK IN BOOTLOADER MODE. I FIRST GOT AN UPDATE ERROR AT 99%, PERFORMED RECOVERY - AND GOT THE SAME ERROR AGAIN. NOW THE RUU WON'T EVEN START AND I GET ERROR 264 : CONNECTION ERROR. ACTIVE SYNC NO LONGER IS GREEN, ETC. I DOWNLOADED THE XDA MOBILE 6r2a.zip FROM THIS SITE. NOT SURE WHAT I DID WRONG. I THINK I NEED TO GET BACK TO AN ORIGINAL ROM AND START ALL OVER BUT NOT SURE WHERE I CAN FIND ONE. THANKS.
Click to expand...
Click to collapse
That was the same rom that toasted my Qtek 9100 and now I'm stuck at the 99% mark before I get update:[302] error. Sorry didn't mean to steal your thread m8 but when I aksed the forum if they could help me out I got zero response ...so mines a brick right now.
BTW: I've tried the Wizard Love ROM but that was spanish I think and comes up with "INVALIDO" or something similar. I've fully charged the battery, removed the SD card and disabled "allow USB connections" in activesync, along with killing off wcescomm.exe ...but still no joy. Hope you get sorted with yours soon.
Original ROM's are easy to find, just go to either your phone service providers website and it should be on there, or go to HTC's website and they'll either have it or have links to where you can get it. Before you tried flashing XM6r2a, did you CID unlock your phone? That may be your problem.
ADD+, your phones not a brick yet if you can get in to the bootloader, which since you said that you tried to flash the wizard love ROM I'm guessing you can still do. You should also re-flash the original ROM that was on there and see if you can at least get that one to load back on there.
Also, for Original ROM links try this link - http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
xeno1 said:
Original ROM's are easy to find, just go to either your phone service providers website and it should be on there, or go to HTC's website and they'll either have it or have links to where you can get it. Before you tried flashing XM6r2a, did you CID unlock your phone? That may be your problem.
ADD+, your phones not a brick yet if you can get in to the bootloader, which since you said that you tried to flash the wizard love ROM I'm guessing you can still do. You should also re-flash the original ROM that was on there and see if you can at least get that one to load back on there.
Also, for Original ROM links try this link - http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
Click to expand...
Click to collapse
Got mine fixed by using the Xda_MiniS_LaunchROM_v154102.exe from the link in the definitive guide sticky. So as they say RTFM!!

Phone Stuck in Splash Screen

Hey
I upgraded my phone from a molski rom to the wm6 rom and now it is stuck in the start/splash screen with MOLSKIs splash.
I done what was told in another thread but still nothing working( Mini SD Method).
Does anybody have any other ideas?
I can get to the bootloader but that about it.
NB: Its a G3 Device and it is CID Unlocked
Is the anyway to load a rom on a memory card and install it from bootloader
You could try flashing back to the rom that your device came shipped with aka your carriers rom.
Yeh, Doesnt seem to work.
I get the error 260 in RUU.
Maybe the Wizard Love Rom will work, but I can seem to get the rapidshare link to work.
Reboot your pc. Then kill off wcescomm.exe from task manager. Then disable any firewalls and remove your minisd card from your device. This may stop the errors. Try flashing your carriers rom again.
If the error msg is still there then report back here and I will find you a working link to wizard love.
Exact same message, Error 260.
I did try to do the Mini SD card method early, everything went smooth. It said completed and when I restarted the device, nothing had changed.
IPL/SPL 2.26, but my OS Version is : 6.00
The Splash Screen Im getting is from my old Rom, Molskis AKU 3.2
Know a place that I can get the Love rom From. I have searched everywhere.
Wizard Love is located here and here.
peter petrelli said:
Wizard Love is located here and here.
Click to expand...
Click to collapse
Download session invalid.
Cant seem to get anything from Rapidshare
Yass3r, I think you performed CID unlocking while IPL is 2.26...
Look at the sticky in the forum, get the Button's 1.05 ROM, flash it so IPL and SPL is downgraded to 1.01, then CID unlock your wizard again.
Hey
I cant seem to get anything from Rapidshare, maybe my ISP blocks it. Is there anywhere else that I can get those specific Roms from?

Corrupt HD?

Hi,
I've just upgraded to a new Dutch rom, but since then I only have trouble.
I get different colours (like drivers are not loaded), it keeps getting stuck or resets itself, and nothing helps.
I've tried to put on a different rom, with succes, but I still have the same problems.
On startup, however, I see the right colours.
I also put back the latest original ROM, but no luck...
Can anybody help me?
guessing you have hspl 1.14 installed
Yeah, I reinstalled that, as one of the latest things I did.
The problem you describe happens when you flash a 1.56 based rom with 1.14 HSPL. First flash a stock 1.56 ROM (a new SPL is then flashed as well) or use the new HSPL. Then you should be fine. So no, it's nor corrupt!
For more info, read crackwhore's guide (sticky)
Well, I'm trying to do so now, but it keeps getting stuck at 0%...
Does it matter I have an NLD-version, and not a WWE?
Update: I cannot get a proper connection via activesync, and through the bootloader it stays at 0%, and after a while the update utility says no.
Update 2: ah, thanks to troubleshooting, it looks fine!
THANKS!

Categories

Resources