Database Develop

Forcing Bootloader Mode

Maybe some of you are already aware of this procedure, maybe not.
Anyway, it worked for me and I decided to share how to do it. Simple.
This procedure should only be used in case you really need enter into a bootloader mode and all other ways to do it has failed! Hold Camera button is one of these I am mentioning.
My Wizard was almost bricked at that time and after I speak with an I-mate technical guy, I got the following:
1. Make sure your i-mate™ K-JAM is not Connected to the PC and remove the dummy card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your i-mate K-JAM to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t use the IrDA or Bluetooth for the Upgrade)
4. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
Hope it helps!

this realy worked for my (ex)bricked dutch tmobile mda vario !!!!
tip: REALY make shure that there is no wcescomm.exe running all the time and realy remove the sd card else is nogo
btw: my wizard is CID locked! and works like a charm

Thanks buddy!
I'm happy that worked for ya!
Take care!

I'm having a problem
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Any ideas?

Hi!
Have you already flashed your device once?
Which ipl/spl do you have?
I had problems over 1.05 ROM in the beggining.
If you stuck on bootloader mode, that's a good signal your device is not bricked.
I'd recommend you to disable activesync as you did and reflash it again! Check also if your device is CID unlocked! Search for a thread in the xda developers root.
Try to upgrade to ipl/spl 2.26 first and later to others you want.
Regarding the old file error...can be related to a missing file called enterbootloader.exe.
Hope it works for ya!
Take care
Ironman273 said:
I'm having a problem
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Any ideas?
Click to expand...
Click to collapse

My device is unlocked as I've been trying different ROMs as of late. I had gone back to the Cingular 2.25 ROM for a couple days to sort some things out and was going to flash Farias AKu 3.3 when my power problems happened. My Current IPL/SPL is 2.25
I've tried flashing the TMobile 2.26 but keep getting connection errors. In fact, I've tried flashing with every ROM I have pdviet 3 and 4, CIngular 2.25, TMobile 2.26 and Custom 1.05. Everything (except twice in the custom) gives me connection errors.
Any other trick I can try?
BTW, I used to live in Sao Paulo years ago...
Edit: OK, so I tried the 2.26 TMobile ROM after I typed this and it worked!! I'm back up but I was having trouble with that ROM beause of some incompatibilities with Cingular. I'll go back to Cingular's ROM and play it safe for now.
I believe part of my problem was I kept trying different updates one after the other. Now that I think back, the 2 times I got the update to almost work was after I turned off the device and turned it on again, which is what I did this time around also.

I had the same problems as mentioned by Ironman before. I followed the steps and with a few slight changes, I managed as well to "unbrick" my wiz. THANKS A LOT for the great step by step manual!!!
Still I wanted to know WHY i bricked my device:
I was trying to upgrade to the underground WM6 ROM. I got the same situation as ironman:
Quote:
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Unquote
I then followed the instructions by epimazzo as written above. I also tried the T-Mobile ROM 2.26 which was not working for me. PANIC!!!! Error messag was that I had the wrong Vendor ID. THerefore no upgrade to TMob 2.26 was possible. I tried it then my original qtek ROM in my language and see it worked!!! This IMHO means that I did not put the device in a proper IPL1.xx and SPL 1.xx status which is required for a clean system in irder to unlock it! So if it is bricked, try your native AKU2 ROM and make sure you unlocked it properly. Maybe you have to run the 1.05 ROM for a second time after the unlocking.
I hope this helps you guys.

Sounds great to hear that!
I had play around with pdaviet3, underground and another ROM just today without any problems at all. I don't think that this is the case. Now you get your device back to normal, try to reflash it again. Hope it works this time!
BTW,...São Paulo is a nice city. Thanks! Let me know if you decide to come here!
Take care
Ironman273 said:
My device is unlocked as I've been trying different ROMs as of late. I had gone back to the Cingular 2.25 ROM for a couple days to sort some things out and was going to flash Farias AKu 3.3 when my power problems happened. My Current IPL/SPL is 2.25
I've tried flashing the TMobile 2.26 but keep getting connection errors. In fact, I've tried flashing with every ROM I have pdviet 3 and 4, CIngular 2.25, TMobile 2.26 and Custom 1.05. Everything (except twice in the custom) gives me connection errors.
Any other trick I can try?
BTW, I used to live in Sao Paulo years ago...
Edit: OK, so I tried the 2.26 TMobile ROM after I typed this and it worked!! I'm back up but I was having trouble with that ROM beause of some incompatibilities with Cingular. I'll go back to Cingular's ROM and play it safe for now.
I believe part of my problem was I kept trying different updates one after the other. Now that I think back, the 2 times I got the update to almost work was after I turned off the device and turned it on again, which is what I did this time around also.
Click to expand...
Click to collapse

It seems you got the idea!
You did the right thing! Sometimes, use the official ROM can solve many issues out there!
Keep walking!
enlite_de said:
I had the same problems as mentioned by Ironman before. I followed the steps and with a few slight changes, I managed as well to "unbrick" my wiz. THANKS A LOT for the great step by step manual!!!
Still I wanted to know WHY i bricked my device:
I was trying to upgrade to the underground WM6 ROM. I got the same situation as ironman:
Quote:
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Unquote
I then followed the instructions by epimazzo as written above. I also tried the T-Mobile ROM 2.26 which was not working for me. PANIC!!!! Error messag was that I had the wrong Vendor ID. THerefore no upgrade to TMob 2.26 was possible. I tried it then my original qtek ROM in my language and see it worked!!! This IMHO means that I did not put the device in a proper IPL1.xx and SPL 1.xx status which is required for a clean system in irder to unlock it! So if it is bricked, try your native AKU2 ROM and make sure you unlocked it properly. Maybe you have to run the 1.05 ROM for a second time after the unlocking.
I hope this helps you guys.
Click to expand...
Click to collapse

Excellent post. I messed up with my own cooked ROM and could only get the bootloader screen. Tried the tips here - didn't work first time but I pulled the battery from the KJAM to reset it rather than using the reset button and it worked fine.

In my opinion this thread is so helpful to people who brick their device, it should go "sticky". Mods anything you can do about it?

Thanks buddy! I really appreciate!
We survive here over tips like that!
jt_armstrong said:
Excellent post. I messed up with my own cooked ROM and could only get the bootloader screen. Tried the tips here - didn't work first time but I pulled the battery from the KJAM to reset it rather than using the reset button and it worked fine.
Click to expand...
Click to collapse

Help me similar problem
I upgraded Super Rom, then my Wizard run very slow and no signal (no call out and in- no network at all). And Terible thing is PC could not dectect PPC thought Active Sync. I've soft and hard reset but no use.
So I donot know where to start to re install Rom again.
Please help me....

Hi there!
It seems that you just need to enter into the bootloader mode and reflash it again!
I had similar problems and more during my brick "false" stage!
So, just try to follow my steps here and you should be fine! Once you get into bootloader mode, just use any ROM out there to reflash.
Good [email protected]
thaiphong said:
I upgraded Super Rom, then my Wizard run very slow and no signal (no call out and in- no network at all). And Terible thing is PC could not dectect PPC thought Active Sync. I've soft and hard reset but no use.
So I donot know where to start to re install Rom again.
Please help me....
Click to expand...
Click to collapse

I was about to start a EMERGENCY HELP thread, but I *think* this is the right place instead.
The "touch" of my screen went dead today. It got progressively worse over a few hours, starting with difficulty in using the phone dialer, then random incorrect stuff getting triggered by screen taps.
So I hard reset, and got no response on the fifth alignment cross, meaning 1) "Tap on the screen...; 2) center; 3) top left; 4) bottom left; 5) bottom right. In that I could not proceed with alignment, I hard reset again, and now, at the first alignment screen, i.e. "Tap on the screen...", I have no screen response at all.
I called T-mo, and they are being great about sending a replacement ASAP (and getting me a loaner in the meantime).
BUT, I am running Faria+ AKU3.3 V2... so I clearly have to flash back to T-mo 2.26. I can;t figure out how to do it though, as no matter what I do I am stuck at the first alignment screen!!
HELP!! EMERGENCY!!!
(I have three or four days to get this done, so it's not THAT urgent)

Do a search for Broken Screen. Someone (either in Wizard Upgrading or in the Wizard forum) just had a similar issue with a cracked screen. They downloaded something that allowed them to get around the welcome page.

Actually, if you are just trying to flash a new ROM, don't even mess with it. Go straight to the Boot Loader screen (see the first post of this thread). No tapping necessary until the new rom is on (and that will be the Tmobile then so you would be good.

Thanks for the quick reply. Charging up to green now, and then will try to enter bootloader and flash T-mo 2.26. Will report back.

Worked great. Back to T-mo she goes!!!

BootLoader Mode
Excellent thread but you left out one thing.....exactly how to place your device in bootloader mode.
To clear up any misunderstanding because this is very important....this is how you do it:
Perform a soft reset, when the screen goes blank hold the camera button until a multi colored screen comes up .... That's it !!!!!!
When the unit is connected, USB is displayed at the bottom left.

oh my...did i brick my phone?

I cant believe this....I had no issues all day upgrading the ROM...until my PC overheated and shut off at 57%...
now when my phone starts up I see the 3 bars and it sais USB in the bottom left...but active sync is not connecting!
help!

what 3 bars?
a Red Blue Green Bars color?..
If that so.. you are too lucky..

I read a little more on the wiki:
Type 2a: When the phone boots, it goes directly to bootloader mode (tri-color screen)
This is what I have right now...I can't seem to get active sync to connect...although at the bottom of the screen it has "USB"
I have tried using mtty and dont think its diong anything...

Just stay in the bootloader (tri-color screen) and make sure the "USB" is shown in your device screen..
The reflash.. even if its not sync/connected.. just reflash the ROM..
Everything will be fine..

wow....i think it may actually work....that was SCARY.
nice to know the good ole button flash works when all others fail

I just want to make a clarification..
You are just flashing your device and when the upgrade process is on 57% your computer suddenly shutoff? and the upgrade was cut..
What happened next? did you reset the device then went to tri-color screen? or you just force bootloader mode it?

Yeah pretty much exactly what you said. I literally got up for a second to get some water, came back and saw the telltale sign that my pc had just shut itself off (the screen was black except for the standard boot junk that shows up).
So I look at my device (8125) and it was locked at 57% and was not responsive. I figured that the flash util probably wouldn't continue after the computer started back up (and besides, the device wasn't alive anymore) so I rolled the dice and unplugged the USB and took out the battery. When I put the battery back in and hit the power button, it went straight to the bootloader (the tri color screen).
- By the way - ive got the button image on here now - workin like a champ...

tnx for the explanation..
have fun!!..

thanks for the quick reply - i thought i was completely stuck but the button flash seemed to take care of everything. Makes me almost think that bricking this thing is near impossible... >

Yup!.. that also my conclusion.. its impossible to brick.. thats why i ask for your clarification..

What is this "button flash"? I am stuck in RGB boot mode with no activesync connection. I have read til my eyes crossed, but can not fix my 8125 (G3)!
Please advise.

How about more information? On your bootloader (Rainbow screen) what does it show the IPL / SPL to be? What were you trying to do when you got into this situation? What happened when you were flashing? Is your device a G3 or G4?
Safest thing for you to do right now is to flash your carrier's rom onto the phone (an official shipped ROM). With your phone in the bootload, just run the ROM and it will install (DO NOT RUN A CUSTOM ROM AT THIS POINT SINCE YOU HAVEN"T TOLD US ANY OTHER INFORMATION).

G3 8125
ipl/spl 2.25
Was trying to use faria's latest rom...got stuck at 99% for almost one hour, so I rebooted computer and discon'd the wizard. Now it will boot to rainbow screen and will not connect via activesync (so I can't utilize any other roms to get back to square one).

ActiveSync will NOT connect when you are at the boot loader. As long as you see USB in the bottom left of your phone (above the left soft key) then you can flash your original Cingular ROM and be good to go again.

brick, brick, brick
It happend to me too with faria´s new crossbow rom:
the device freezed at 99% and I reseted it then....nothing happend- bootloader mode: red green blue + usb... but no chance to flash ANYTHING... always the same message:ERROR (260) update error, no connection to the device...???
I tried the O2-mini s update, and the faria rom, no chance just a brick
I need help....

Hunter6 said:
It happend to me too with faria´s new crossbow rom:
the device freezed at 99% and I reseted it then....nothing happend- bootloader mode: red green blue + usb... but no chance to flash ANYTHING... always the same message:ERROR (260) update error, no connection to the device...???
I tried the O2-mini s update, and the faria rom, no chance just a brick
Click to expand...
Click to collapse
Why did you reset it??? All roms freeze. The screen that is flashing the ROM even says it can take up to 10 mins. If you don't get an error onthe PC then DON'T stop the flashing process.
Go get a copy of your carrier's official ROM (not a custom one, but an official one from your carrier.). Then with the phone at the boot loader (Rainbow screen) and the USB cord plugged, in, run the official ROM. If that doesn't work, then get a copy of the Wizard Love rom and flash it (You'll need to find links around here for it, or pull it via PirateBay). You may also want to reboot the PC you are running on and remove your SD card (if you have one) just to remove variables that can play in to all of this.
Good luck

mfrazzz said:
Why did you reset it??? All roms freeze. The screen that is flashing the ROM even says it can take up to 10 mins. If you don't get an error onthe PC then DON'T stop the flashing process.
Click to expand...
Click to collapse
Ten minutes is understandable, but mine stalled for about an hour at the 99% mark. Even my PC would not respond. Is that normal for a rom upgrade?
-----
I was finally able to reset my 8125 to the Cingular ROM. Not sure why I couldn't do it on my PC, but after moving over to my wife's PC I did not have any problems.
Thanks!

brick, brick, brick
o.k. boys, now it is a nice little crossbow brick from faria.....and I can make telefon-calls with my brick.
thanks a lot for your help

entdiablo said:
Ten minutes is understandable, but mine stalled for about an hour at the 99% mark. Even my PC would not respond. Is that normal for a rom upgrade?
Click to expand...
Click to collapse
No, that sounds like your pc locked up or something (I'd blame windows on that one )
I was finally able to reset my 8125 to the Cingular ROM. Not sure why I couldn't do it on my PC, but after moving over to my wife's PC I did not have any problems.
Click to expand...
Click to collapse
Glad to hear you got it going. Good luck and be careful out there!

Hunter6 said:
o.k. boys, now it is a nice little crossbow brick from faria.....and I can make telefon-calls with my brick.
thanks a lot for your help
Click to expand...
Click to collapse
Sorry, I may be missing your humor or sarcasm... Are you saying its dead (if so, give more details about what it does or doesn't do, IPL/SPL it shows (if it turns on), etc... If its now working, then congrats!

How to Flash in BootLoader

I have a stuck image on my 8125. The phone "boots" but only shows a white screen, and is unusable.
The "a2sd all" restore option mentioned in the forums doesnt work for me. I have read on several forums that I should be able to reflash the OS from the bootloader, though I cant find any instructions on how to do this
Could someone point me in the right direction for how to flash an OS VIA bootloader?
Thx

1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek

Mirek - not to be totally ignorant, but the step 4 is what I'm having problems with .... where can I find either a providers ROM, or something that I can actually use while in bootloader mode?
Thanks!

NM ... Found it!
For anyone reading this .... You can get the provider ROM for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
Thanks for your help!

mirekluza said:
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Click to expand...
Click to collapse
Dear Readers,
I'm having problem with my Dopod 900(,Qtek 9000,HTC Universal,O2 Xda Exec,Jasjar ). Can somebody please tell me what to do?
Before this, every time somebody called, the PDA lost the network bar and start to search or network and reject the calls automatically and also i wasn't able to send SMS. Now, i tried to install WM6 crossbow, the phone even cannot be on !!! even when i connect it to the charger, even the light will not be on. the only page that i can see is a white page asks Press 0 to Restore factory default or press X to exit. either perss 0 or X, the phone will be off and i cant turn it on with power key....
Please tell me what can i do ?? I really need your help.
PLEASE REPLY, PLEASE.
[email protected]
Warm Regards to All
G-Jorji

brick?
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore

acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
WHAT did you downgrade from?
Did you re-unlock your G3?
How's your battery?

acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
IPL/SPL 2.08? Does that exist? Do you mean 3.08?
Are you sure your device is a G3? Or you killed it when flashing Button's ROM?

bricked my G4 Wizard, not able to flash via bootloader

Hi there,
never thought this could happen to me [/irony]
I wanted to flash my G4 Wizard (IPL/SPL 3.08) to the last official ROM of T-Mobile Germany (AKU 3.3)
The flash process got stucked at 99% for hours and now my phone only boots to the three-colored bootloader.
No problem I thought, flash again. I plugged the cable and I saw "USB" on the display (there never is "serial" on the display, if this is for interest)
But now: no flashtool would find the phone.
Sometimes when it's found (seldom), it says that's not the right utility. I tried a RUU..._noID.exe I found here but this only got "no Connection"
I tried flashing from Vista, XP and 2000 SP4.
Please help me.

Did you do the HardSPL? If you did, when you tried to put the official ROM from T-Mobile, it tried to put the IPL/SPL from G3 on your phone, since the HardSPL makes your phone a fake G3 (something like that). You have to remove the IPL/SPL info from the official ROM's otherwise you get stuck.
There's hope tho, since you can get to bootloader. You can try the miniSD flashing method, meaning, there's no connection to the computer
See here how: http://forum.xda-developers.com/showthread.php?t=276963&highlight=minisd+flash

Thank you very very much!
it worked!

Glad I could help

Cannot Flash Original Rom

First off, anyone on this forum who has contributed anything, I am have the deepest respect for, and my favorites will get donations as soon as I have money. Ok enough a$$ kissing.
So here is my problem:
I flashed it's right's TNT 6.1 19919 after hardspling. After many problems, like pseudo-hard resetting (turning off, losing all but 6% battery, and changing the date back to what it was originally i.e. 1/27/06) while in a phone call and doing the same while using the wifi, i hard reset and still the same problems occurred. so I undid the hardspl, so now i am back to 2.25.001 in the bootloader but when i connect it to the computer (winxp) to flash the original rom (cingular 2.25) it freezes at 91%. If anyone has had this problem occur or knows the solution as to get ANY rom back on it, IT would be greatly appreciated.
Also after doing some reading I tried to flash wizard love 2.26 to it and that freezes at about 50-60%. so I am stuck and it is really annoying.
Full 8 hour charge, restart computer, different usb port. Same happens: Error 302 Update Error

Hum... maybe when you reCID locked it, you put a CID that's not for that official ROM you're trying to flash. The misbehavior of the phone is due to the ROM you had, not the CID Unlock. If I'm not mistaken, you can hardSPL it again, from bootloader. Then you can try and flash any other ROM you wish. Give my ROM (WM5SE rev5 - if your phone can handle 240MHz - or rev4) a go, after you have CID Unlocked your phone.

My phone can take up to 273 but, all the roms i flashed were g4 safe.... because the ipl spl never changed and i checked them in shell tool . it gives me a update error 302 which wizard love documentation says that the "phone needs a new rom code" which implies that it needs to be taken to cingular, and i dont think i can lie that well. how would one "accidentally" put their phone into bootloader?

theblackhandx said:
First off, anyone on this forum who has contributed anything, I am have the deepest respect for, and my favorites will get donations as soon as I have money. Ok enough a$$ kissing.
So here is my problem:
I flashed it's right's TNT 6.1 19919 after hardspling. After many problems, like pseudo-hard resetting (turning off, losing all but 6% battery, and changing the date back to what it was originally i.e. 1/27/06) while in a phone call and doing the same while using the wifi, i hard reset and still the same problems occurred. so I undid the hardspl, so now i am back to 2.25.001 in the bootloader but when i connect it to the computer (winxp) to flash the original rom (cingular 2.25) it freezes at 91%. If anyone has had this problem occur or knows the solution as to get ANY rom back on it, IT would be greatly appreciated.
Also after doing some reading I tried to flash wizard love 2.26 to it and that freezes at about 50-60%. so I am stuck and it is really annoying.
Full 8 hour charge, restart computer, different usb port. Same happens: Error 302 Update Error
Click to expand...
Click to collapse
You have posted present IPL/SPL 2.25.001,is it 2.25.001 or .0001 ?
As you removed 'HardSPL',did you reflash the appropriate IPL/SPL regarding your phones official bootloader IPL/SPL...?
You shud do the 'HardSPL' again and either do the removal of HardSPL again correctly as instructed in the sticky ' How to remove HardSPL' or Flash any other Rom to recover.
Cheers!

no it was 2.25.001 just a typo. i think i will try these suggestions when i get home and i will post my findings.