I was trying to change my rom in Vista RC2 yesterday and could not get past the bootloader screen. it was late and I didnt get to mess around with it nemore.
has anybody had any success in this?
To the best of my knowledge, you need Active sync version 4.1 to make progress with ROM upgrade.
Are you able to sync using the new Windows Mobile Device Center? That is, can you do more than sync music like in RC1? If not you still might need to do the WHOS hack to get the device download.
baarod said:
Are you able to sync using the new Windows Mobile Device Center? That is, can you do more than sync music like in RC1? If not you still might need to do the WHOS hack to get the device download.
Click to expand...
Click to collapse
You still need the hack.
I got it to work once by putting the device into bootloader mode first. But that was with RC1-5728. Did you give that a try?
Yes I did try and got frustrated. Read the wiki and found the info I posted above. For those interested, MS just released WMDC beta 3 today (http://fileforum.betanews.com/detail/Microsoft_Windows_Mobile_Device_Center_x86/1160408330/1)
Please point to the "wiki". Is it on this forum or elsewhere. Thanks for the link to b3 of WMDC.
Sorry dude, this was some time ago. I read it up either in WIKI or on the forum. And I have always used Activesync 4.1. Tried others and WMDC without luck.
Related
Hey ive been lookin on this site for a long time and have been trying to update my rom for my wizard for at least 3 days. I really need your guys help. I have a mac and a pc and my pc is runnin xp and im runnin AS on my mac under virtual pc with windows xp pro. When i try to install AS on my pc i get an error saying windows installer cannot me accessed and i cant get it to install no matter what i do. So now ive been focused on the mac. I got it installed on my mac an runnin but i got another problem. When i usb my wizard it will not recognize it unless i run usbswitch which is not a big deal till i try to update the rom. I get through the unlocker but when i get to the rom itself it tuns the wizard off an on then gets the red, blue etc screen but does not recognize the wizard is hooked up usb i guess cause usbswitch is not runnin. so my problm is what do i do to fix this delma. Maybe this has already been adressed but i havent been able to find it on this forum yet so i apologize if it was already posted. I tried updating to 4.2 beta for AS but it did nothing. I appreciate any help. Thank you.
ps. i have a tmobile mda runnin out of the box roms, so i guess its 1.8 or sumthin, maybe 1.2 i dunno w/e it is
bump
bump
hello all
i posted this else where in this forum as i thought this wouldnt be the right place at the time and maybe still isnt.. but i wanted to see if anyone has found a fix for this..
microsofts new OS - VISTA (BETA)does not like the boatloaders i have to break out my work laptop to install my rom updates.. I can load application via the new sync mgr. but whne it comes to upgrading / downgrading rom NADA !
anyone else out there beta testing vista .. ?or maybe know why ? i am not ewven sure where the heck to look .. I dont think it recognizes the USB for some odd reason in the bootloader app.
im runnin Vista and i had no problems at all..
HI to all, i'm a newbie here and this is my first time to write and ask for help here. I been read the entire forum to get all info about the wizard phone and i really like this forum here. Give me alot of info about my phone, so i hope all people here can read first before ask question.
After a long search here, i still can't find my answer so i hope someone can help me. I just install the windows vista rc1 and hack the windows mobile based device working for it and i can sync everything and install software to mobile but when i try to upgrade my rom it won't work??? it say usb not connected but its connected at all. Anyone have any idea my happen here?
Hope someone can help me out, and i really appreciate.
If you use RegEdit to add a key called "WHOS" under the HKEY_LOCAL_MACHINE/Software/Microsoft key in the registry, connect your Windows Mobile 5.0 device and go to Windows Update, a new 7.0MB update will be available that enables Windows Mobile Device Center. This should let you do the update.
I done it already, like im say i can run the windows mobile based device with no problem for sync with my phone but when i try to upgrade the rom, the rom program will say error no usb connection. hope this will make it clear. thanks for ur help.
Anyone have try on this and having a same problem like me?
nope,works fine with me. i have asus p4pe-deluxe MB with usb 2.0 and a usb cable from canon.
my only problem is i dnt have license key,so m only on 14 days trial
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
at buddy28, try to reflash it with atleast latest AKU 2.* for universal,just click ur softreset button so that the bootloader will appear again then flash with new rom(be careful though if ur not PRO)
For ArtTX, im now using the Asus Barebone T2-p computer and i have try with another computer with windows vista rc1, it also don't working. It is possible because i'm using vista rc1 not vista beta2?
I'm using Vista RC1 and I cant flash my Wizard too
hmmm.... seem like all the rom upgrade doesn't support vista RC1....thats too bad. Oh well have to switch back to windows xp.
Greetings everyone,
I would like to ask for some advice.
I bought a HTC TYTN II and wanted to flash it to a ROM I found on the forum.
But to do that I had to use nueSPL-2.47.exe
That turned out to be a mistake as at the moment it started formatting to FAT32 the screen freezed. And I waited for around 15min. But nothing happend.
Now needless to say the device does not function. I tried a hard reset(Camera+Power+Reset) and just (Reset). But all I get is a screen darker than the pits off hell.
I am able to get the power light burning but that is it. Already tried putting the battery out and in again. But all to no avail. Maybe one of you can help me?
Thank you in advance.
-
Previous OS: Windows 6.1 (Dutch)
Active sync: 4.5.0
PC OS: Windows XP pro (English)
Just a thought but...you might want to check the Kaiser forum instead...
Posted in Titan forum. Moved to Kaiser forum.
You flashed a Titan SPL to your Kaiser?
Oh dear, not to worry, it might be fixable...
Can you get to your Bootloader?
Ta
Dave
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
kilrah said:
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
Click to expand...
Click to collapse
The other guy never fixed his phone
Dave
uh oh... what was your radio version? does the PC still try to load a driver when you connect the phone?
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
I sure hope I do not have to send it to my supplier. Because the phone is just 2 weeks old ;-)
Jin_member_of_triforce said:
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
Click to expand...
Click to collapse
are you able to load these drivers: http://forum.xda-developers.com/attachment.php?attachmentid=71038&d=1203255530
3G, okay, all of them are 3G... do you remember exact radio version. no problem if not, though.
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
There is of course a change I might be able to get files on there by putting my SD card in a card reader.
But does it boot from there?
Pocket controller-pro did not work for me.
Jin_member_of_triforce said:
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
Click to expand...
Click to collapse
that will not help, but there is another way... PM me, as it needs interactive step by step instructions.
im having the same issue i just ran the neuspl 2.47 and my htc tilt wont work the power light comes on and thats it can somepone please help me out i am in need of help badly!
Hey guys,
I have been searching for about a week and I have not found the answer to this question. Sorry if this is a repost!!!
Does anyone know if it is possible to flash tilt with a new rom using windows 7?
I do know that I can use an SD card but prefer to flash it from a desktop "if possible"
Thanks,
vmcilwain said:
Hey guys,
I have been searching for about a week and I have not found the answer to this question. Sorry if this is a repost!!!
Does anyone know if it is possible to flash tilt with a new rom using windows 7?
I do know that I can use an SD card but prefer to flash it from a desktop "if possible"
Thanks,
Click to expand...
Click to collapse
Why wouldn't it be possible ?
Win & uses WMDC
I haven't seen any documentation on this so I am not sure what I need in order to set that up. Is there a reference or FAQ on how to do this? or what utilities I need?
just flash as usual... only thing change is they used to call activesync, but now it is windows mobile device center. i dont think you need any specific documentation...
Ah, no wonder I haven't found anything then. Nothing really has changed!!
Thanks for clearing it up for me.
Hmm I just tried flashing a rom and it told me that I needed a newer update utility. I searched the forum and didn't see anything. Any ideas where I can find a new KaiserCustomRUU.exe?
Moved as not ROM Development.
Regards new flashing utility there isn't one but the issue you mention has been covered before can't mem the fix.
Easiest way leave out comp and use SD.
Right click, run as admin
http://forum.xda-developers.com/showthread.php?t=579612&highlight=windows+7
http://forum.xda-developers.com/showthread.php?t=624584&highlight=windows+7
http://forum.xda-developers.com/showthread.php?t=608398&highlight=windows+7