Database Develop

Qtek 9090 Rom Update 1.40.154 German found

Hi all,
we found the update for a Qtek 9090. Here for any who need it to:
http://www.xtrem.cc/html/hochzeitsvideo/qtek9090/BA_DT_GER_14001_154_11200_Ship.exe
greets
werner
http://www.xtrem.cc
http://www.sfx-team.com
http://www.hochzeitsfilm-hochzeitsvideo.com

dead link
please upload to the FTP.

dead link
try this ...
http://www.xtrem.cc/hochzeitsvideo/qtek9090/BA_DT_GER_14001_154_11200_Ship.exe
Cheers,
Hawk

Hochzeitsvideo ??? :lol: :lol:
However, I tried last night to make my XDAIII work with the 1.40.01 ROM, but no way to upgrad that ****. I read something about to use instead of the "BaUpgrade..." the "MaUpgrad..._noID.exe" because sometimes we got some problems with "Country ID Error". I supposed to use the MaUpgrade exe-File with the 1.40.01 ROM Update, the proggi ask me if I want to upgrad from 1.31 to 1.40 ROM vers. and Radio from 1.10 to 1.13 - click OK. done. XDA screen's backlight flashed off and "USB" stands at the top and the Version at the bottom. Ok... after a few sec. the update proggi said: ERROR 120: Model ID Error .... your device isn't designed to work with this patch.
I don't know what tha hell 's goin' on with that thing. Because many other guys in our forum already done this.

do the flash in 3 steps
1) 1.40.1 CE
2) Radio following wiki.
3) Flush the extrom
The 1.40.1 is a type II rom and the radio is a Type I.
Make sure you only use the files that are posted and dont mix them around.
You also might be having problems as your device has a differernt Version Number (that is if you have a camera) thus you need the MA tool.

Hi,
I've done it yesterday night/today morning. I downloaded the vodafone VPAIII update and the Maupdate, extracted the exe to folder and packed the maupgrade in it. started maupgrade "ERROR 120: Country ID Error", aight, "EXIT" started program once more, works ! Great, now I have the 1.40.01 GER ROM and the 1.13 RAdio Version.
And a fully Vodafone branded o2 XDAIII :lol: :lol:
I'll de-brand it today night and install some of the o2 CAB's. But at the moment I'm thinkin' to installe magneto - not sure because of the per4mance probl. :roll:
thx !

Please help! How to make my 9090 like the day i bought it???

Hello, I upgraded my qtek 9090 firmware to imate PDA2K using the patched MaUpgradeUt_noID.exe . But now i want to load my official Rom upgrade again (qtek Greece) but i get the Country ID error.
If i use the (BAupgradeNOid.exe) patch everything works fine but i must send it for repair and if they see that the phone has been abused and has no ID my warranty will not be valid anymore.
So how can i make it like the day it was when i bought?
i have the devicedata.txt file saved in my PC
thanks!!

Problem with spv m2000 cant do HardReset

Hi guys
I have a problem yesterday i tryed with that program http://www.hpc.ru/board/download.php?id=5038 = MaUpgradeUt_noID and start EnterBL than GetDeviceData (that was in pack from russian www )
change my spv to Imate pda2k. Now i cant do enything - it means when pda is spv in base i see on it just @[email protected], when i disconnect from base i see smth like that @Serial and [email protected]
Also cant do hard reset. How can i repair my spv?
greets

Search the forum for MTTY tool. It should help.

My Qtek 9090 is completely empty

Hello
I write to you in search of HELP. It has happened to me what it is noticed in all around. When wanting to update my Qtek 9090 of W2003 to WM5 I have lost all the data (toasted). The only thing that works is the Bootloader (the screen shows “USB v.2 07”). A hard reset do not work.
How I can install the image of the WM5 from 0? Somebody can help me? Is there a program? I have tried it with the BaUpgradeUt.exe but it does not work since the PDA looks for the image (and this one this empty). I do not know what to do.
Thanks in advance,
Wing

read the wiki
did u read the wiki before trying the upgrade process? just download rom image and update again ur device, use maupgradeutnoid.exe instead of baupgrade..

How to use maupgradeutnoid.exe?
Hi borjok536
Thanks for the answer. I have used the wiki to run this process. I do not know what I did wrong but I did it
I have tried to use maupgradeutnoid.exe but I must confess that I do not know how to use it. I start in Bottloader modeand the program says that the device is going to be updated
from Device CE image version: (blank)
To: Device CE image version: (blank)
How do I say the program where to find the image (nk.nbf of 32 Mb)? Is it normal that the picture of the device in the program shows a Qtek S200 (PH20B1)?
Regards,
Oskar

Any new news??
Hello guys
I really need help. Someone has an idea?
Thanks.

oirmler said:
Hi borjok536
Thanks for the answer. I have used the wiki to run this process. I do not know what I did wrong but I did it
I have tried to use maupgradeutnoid.exe but I must confess that I do not know how to use it. I start in Bottloader modeand the program says that the device is going to be updated
from Device CE image version: (blank)
To: Device CE image version: (blank)
How do I say the program where to find the image (nk.nbf of 32 Mb)? Is it normal that the picture of the device in the program shows a Qtek S200 (PH20B1)?
Regards,
Oskar
Click to expand...
Click to collapse
You just place the nk.nbf file in the same directory as the exe file. whether you use the maupgradenoid.exe or the other one.
There is not another way to tell the executable where the nk.nbf file is.
C

No result
Hi cso5874
I have made this but the result is the same:
from Device CE image version: (blank)
To: Device CE image version: (blank)
Any other idea. Maybe I am not using the right program...
Regrads.

is this ur first time?
to update ur device? if you execute the update utility (baupgrade.exe or maupgradenoid.exe) and if u see the ceimage version is blank, just exit the upgrade utility and execute it again...

hey borjok536
i had the same problem.
The Upgrade utility didn't show any data of the Rominside the BA.
But just klicked on upgrade and it worked!

good for you..
, if you continue the update process even if the ceimage version doesn't appear, sometimes the update process will stop to n% ... sometimes it work like in ur case, but to avoid that problem you'd better exit the upgrade utility and execute it again...

Finally, the solution
Hi guys
The version is not shown because there is no version, the BA is empty. Finally I sented it to the Qtek tecnical service in Spain. They have put the old WM 2003 SE again (I want to know how )
So, I think I will try it again. How much time does the upgrade last? I have a message on the PC since 1 hour ago:
"Checking the information on your device... Please wait...
Please, don't disconnect your device from the PC or the power supply until the update is completed"
In the BA the Bootloader is shown. Should I wait more or the program seems not to work?
Thanks for your help!

O2 XDA 3 DE - failed upgrade on WM6.0 - need help pls

Hello,
I have a serious problem.
I've got a HTC blue angel PPC (O2 branded version XDA 3 from Germany)...
This PPC has a WM 2003 SE with GER localization. And i want to reflash on WM 6.0 in english.
Now i know, that i made beginners mistakes.
1) was i tried to flash wm6.0 under Windows Vista x64 with WMDC.
2) was i tried to flash english version of ROM on german localized PDA (which was unfortunately locked)
3) and i am such idiot, because i don't backup original ROM!!!
After this steps i turned on this PDA. I saw 4 coloured strips. And that's all... Since this time I can see only this stripes (after turn on) and on this screen i see only R 1.10.00 and not G or D parameters.
After all i tryed next things which crossed my mind.
Under the Win XPSP2 i tried to reflash it again.
1) to WM 6 - and i almost got country error
2) back to WM 2003SE, but english. I got country error or it was not function.
3) i tried to download ROM upgrade from DE.o2.com (German version of upgrade) and i got country error.
Now i don't know how to restore this device after my fatal advances.
Please help me, if you can...

Nobody can help me?

Perhaps this will help you:
http://forum.xda-developers.com/showthread.php?t=374127