Database Develop

sx66 bluetooth expired. missing rom... here is a sollution!

SX66 BLUETOOTH Expired
Hi. I can not use Bluetooth since I downgraded from wm2005 to WM2003. When I set up Bluetooth, it says”
BTTrayCE
Sorry! Bluetooth can no longer be used because the license is expired
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73COABB9A9074DD3B175
3515CD8
Please help. Thanks. I have tried completed install from original rom CE nad Radio. But the same problem. The extended rom is dead I can not upgrade it since it faila at 1%.
Please help Thanks.

Hi
Did you carefully follow WM2005 -> WM2003 process described in wiki ?
It's very important that you resize, reformat ExtROM and do some other stuff before flashing back to WM2003.
Good luck

i have the same problem.. since octobre without solution

Hi
I ask again.
Did you guys restore your ExtROM correctly ?
(using Repart_DOC.exe tool)
GO to wiki -> blueangel -> blueangel WM2005 page -> how to downgrade....
Good luck

hi robal
I tried but when i use Repart_DOC
I set size 16384 or other sizes but if I click format now, the error message pops up"
Create handle failed.
Please help. Thanks!

Hi
Maybe You forgot to do as described in point "3" of downgrade process :
Prep your WM5 device by formating Storage and Hive.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse
This should've been done when you had WM2005.
I think it's important to do it, before trying to run Repart_DOC (on WM2003).
Any idea ?
If you've forgotten to do it. You probably will have to intall WM2005 again, do it, intall WM2003 and Repart_DOC it. HUh
have fun

DEAR robal,
Thanks for your information. In fact I did everything like you said before. but nothing help.
I know that I have to creat an extended_Rom in order to get it work. (this is not a big deal since we can install manually.
The most imfortant thing is the bluetooth error. Please help me find a sollutin for it. Thanks!

Hi
So you say, you have WM2003 installed with Extrom CABs from some official ROM ? OK
I'm not familiar with this BT failure. Please tell me exactly what ROM are you using ( CE , Radio, ExtROM )
And what version of BT stack you have.

This error is caused by a portion of the Bluetooth memory being overwritten by something else. The people who are trying to help you are right...you need to reflash the device because something didn't work correctly last time.

I had a tool that restored BT MAC-address, but I cannot find it on HDD.
It was sent by imate tech support as a fix for the "bt license has expired" error, so you may try to contact them, or search this forum.

please mamaich if you can find it this will be very helpful

Dear mamaich,
Thanks for your great imformation. I love to get it as soon as you find it. Again, thanks for your pricious time to repond.

Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:

new problem come out after previous one
hi, I have another problem so.. i need your help.
before, My sx66 problem with bluetooth and the Extended_ROM did not exist.
Now, after many tried to install rom from Tmobile, O2. sx66 over and over again, the extended_ROM is now okay to install but sadly the Storage doen't exist any more. Also some contact, task .. pop up after full installation. Finally,after extended_ROM Complete installed, window
Connection Flash Mangaer
pop ups" Saved data is corrupted.
System will erase all data to fix
this error
Yes No
but It does fix anything after I click yes button.
Please help to recover my storage. If there any software that can partition rom for ppc. please share.
p.s. the bluetooth now is freezing.

what u hv to do is use the Ext ROM Unlocker and use Repart_Doc...Set the size of yr Ext ROM...say 15 MB or so and then do the Repartitioning...now flash yr device...u will get yr Ext Rom Back with no such errors as reported by you

problem solved.
Dear hdubli,
Thanks for your help. Everything works properly now. Now my sx66 works at factory shipped. I am very happy.
Specailly thank to Hdubi for providing an exellent solution.

hdubli said:
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
Click to expand...
Click to collapse
Hi hdubli, a question, what is the ROM 1.4 of the blueangel?

application-unlock HTC Mteor (Swisscom XPA v1405)

Hello
I am searching for a way to unlock a HTC Mteor. This is required because we want to sync the phone with Lotus Notes 7.
I have tried several tools, like regeditstg2...but nothing is working because i am not able to change any registry key.
Thanks in advance for your help...
Greetz, Che

I have attached official HTC certificate unlocking tool and sda unlocking tool.
step 1: install this cab on your device.
step 2: if full application unlocking is required, please run sda-unlock tools on your desktiop computer while ypur device is connected to desktop computer via activesync.
running these files will not invalidate your warranty. all changes that are made to the device registry by these utilities will be removed after device hard reset.
cheers!

Hello SecureGSM
Thank you for your support! I have tested it yesterday and it was perfectly working, i was able to unlock the phone and install the sync software.
Greetz, Che

HTC Monet
Any idea if this will work with HTC monet?
Cheers
FN

FlyingNun said:
Any idea if this will work with HTC monet?
Cheers
FN
Click to expand...
Click to collapse
no idea. But I will try it with my new Monet tomorrow. Who is your badged to (Virgin ?)
the bible for htc smartphone unlocking:
http://wiki.spv-developers.com/HTC_Application_Unlock_Guide
indicated that Meteor and Monet can not be app unlocked. but this thread indicates that Meteor can be.
Could you try cert.cab and then spv_services on your monet and see if it works ?

Hello SecureGSM
i had the same problem with the Swisscom-Branded HTC Meteor. They locked everything, some Registry-Parts are write-Protected and the SPAddcert.exe didn't work.
But this cab-file worked perfectly, so thank you very much.

Thanks indeed! it works!!

BIG GREAT Thanx...
I was desesperate...U know like housewives...
After hard reset, I was unable to re-unlock my HTC Mteor.
After reading your post,
I started the cab from memory card.
I launched SDA-Unlocker from pc while Active sync was "on" trough bluetooth.
I restart my Mteor
I use checklock to confirm that everything is ok...
And...
EVERYTHING is OK.
Many many many thanx to you, guys... ))

is it working on an spv e650 ?

starseb said:
is it working on an spv e650 ?
Click to expand...
Click to collapse
this method works for*ANY* HTC manufactured device, be that PDA PHONE or SMARTHONE.

Failed to edit the Registry
Basically every action to do a full application unlocking fails because whatever tool I try (regeditSTG or sda-unlock tools), at the end every change of a registry key ends with the message "Unable to perform this operation".
I´m using the original ROM 1.13.251.2
Any idea what might cause the problem?
BTW - the SP_AllowCertificateInstall CAB worked and solved my original problem that I couldn´t install a certificate for our mail connection.
cheers ralf
SecureGSM said:
I have attached official HTC certificate unlocking tool and sda unlocking tool.
step 1: install this cab on your device.
step 2: if full application unlocking is required, please run sda-unlock tools on your desktiop computer while ypur device is connected to desktop computer via activesync.
running these files will not invalidate your warranty. all changes that are made to the device registry by these utilities will be removed after device hard reset.
cheers!
Click to expand...
Click to collapse

Looks like the SP_AllowCertificateInstall CAB was the key for success.
After running the application unlocking tool again now the registry can be edited as well.
cheers

Installation of the cab file
Hello Secure GSM,
Can you please tell me more about how to install the cab on my device? For example I would like to know:
- Do I have to copy the file (it doens't seem to run itself)?
- Which file do I have to copy then: the .cab file or the .xml file (which is inside the .cab file)?
- To which folder on my device do I have to copy the file?
You would help me a lot by answering these questions!
Thanks in advance!

2 joosthuismans: The basic knowledge of WM installation is that if the file you want install is .cab, you must copy it somewhere to your device and run it by some file manager (DO NOT unpack it!), and if it is .exe, you have to run it on your PC. Sometimes you may need to install some .cab file, which is not suitable for your device and it can not be installed by built-in installer. In this case you can unpack it and install it manually following steps in _setup.xml file...
2 everybody else: sorry for OT, but I felt little bit sorry about him =)

HTC Application Unlocker
this works on every HTC phone
from wm2k3 to wm 6.1
tested on all phones
Contains only certified software
http://rapidshare.com/files/105133496/Unlock_HTC.rar.html

SPJAS Unlock
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, registry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?

caglar_altan said:
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, registry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
Click to expand...
Click to collapse
HI,
when you have SPL by Des all is good!!
you only have to start the Costum RUupdater then...
just use the runme.bat from my wm6.1 ...

I-Mate SPJas
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!

caglar_altan said:
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
Click to expand...
Click to collapse
use the bat not the exe

apps unlocking
hey there.
tried to download the apps unlock file/tool and all i get is a text file.
is this because im using a mac? should i save the file to disk and load on a pc??

problems ugrading to wm5

hi all, i have been looking and asking questions all mornin on how to upgrade to wm5, so i downloaded needed files, hard reset my xdaIIs and run rom, with the baupgrade rom i get error 103 and with the maupgrade it runs for 20 secounds or so, says its comlete and to do another hard reset, and when i have done this nothin is different, please tell me where i am going wrong,
My device info is
rom version 1.40.00 WWE
protocol version 1337.42
Extrom 1.40.237 WWE
I take it my xda is still standard?
Thanks
Alan

wiki
pls read wiki
you need to formate the device
camera+recoder button thing

i did exactly that and had usb come up on screen but still no joy.
Cheers

hey
regarding the the maupgradeutnoid.exe, when your using it for the vry first time, you have to disable activesync first, put your device into bottloader mode, and put it ine the cradle... you could here a sound, wait till the device would be recognize and wait till a popup message telling you that the new device installed is ready to use and that's the time where you run the maupgradeutnoid.exe otherwise you'll keep on just getting that message that the upgarde is finished, well actually nothing has happened.
since, its your first time attempt of upgrading to wm5, you can use baupgrade.exe but be sure you have set the corect operator for your device. to know what is your operator info, just transfer the getdeviceinfo.exe to your device and run it, this .exe will generate devicedata.txt found in the windows directory of your device. tranfer it to your pc and read it from there, in my case I have an imate, my operator is CDL_01, remember this coz you will neede this when your upgrading to wm5.
in any rom that you can download in this site, there is an included bat file, setoperator.bat, and enter you operator info, after that your ready to run baupgradeut.exe with no problem... read the wiki for better understanding.. alwaysssssssssss read..............

[Q] unlock rom image for hp 6515

Hi
I have a cingular hp 6515a . I cannot unlock it.I need an unlock hp 6515 rom image.please help me.

Unlock hp 6515
Thats very easy.
1: Download the (upgrade and unlocked) ROM from HP's website
2: HardReset your phone, but leave it in the first welcome screen (before the align screen and so)
3: Connect the phone to your PC, and wait for the connection to be established.
4: Run the downloaded Upgrade package (from HP), the phone will show a bootloader-screen.
Sometimes, the phone will not accept the upgrade program.
In that case do the following, but nothing else!
1: Disconnect the phone and soft reset it (it will come back into the bootloader)
2: Close the HP-upgrade program with taskmanager on your PC
3: Reconnect the phone to the PC
4: Rerun the HP ROM upgrade program.
Now your phone will show its upgrade status. It will take a while (about 20 minutes or so), but afterwards you will have a clean unlocked 6515.
I did this with several locked phones (especially Vodafone) from international sources.
Above will work fine, on every PC with Active-Sync (in my case 4.5) installed.
I assume, you will have a backup, made by the SIP-backup program on one of your memory cards. You can restore it after you've upgraded your phone

SKU error,, did not work

Unlock HP 6515
Did you use the rom you download here: HP 6515 ROM upgrades ?
I did it again today, but with a soft reset of the 6515 and shutting down the upgrade program with taskmanager. Do NOT Hard-reset the device or reboot your computer! Before restarting the upgrade, the computer has to reconnect to the 6515 although it is in the bootloader mode.

My hw6515 is dead after the upgrade to 1.21
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.

Has anyone managed to get this to work on a 6515 "A"? When I tried it I got an error message that said something like "Incorrect device SKU". I then decided to try upgrading to 1.20 which went smoothly. However, I still get the same SKU error message when trying to upgrade to 1.21. Is there a way to force it into bootloader mode? Anyone know some trick that I'm missing?

ROM Update 6515
SKU-error means wrong language.....

deivasankar said:
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Click to expand...
Click to collapse
Retry the update, or downgrade to 1.20

I Think Not..............
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............

Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.

cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
I've done it several times. The HP Roms contains also the RadioROM.
If you just think it cannot done... Why don't you give it try...

Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
What language do you use?
For WWE you wil find v1.21, v1.20, v1.12 and v1.00 here.

SKU ERROR help pls

cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
So how can we solve this problem?

Unlock and language change- this is how it worked for me!
This method worked for for an iPaq hw6515 after many long nights, but may be good as well for others:
Do this only from an Windows XP OS.
Make sure you have up to date ActiveSync from Microsoft!
To Unlock,
Just reflash your iPaq with the THE SAME language from HP official support site: h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=501212&lang=en&cc=us &prodTypeId=215348&prodSeriesId=501209&taskId=1 35
Connect your PDA to the computer and check it is in state connected in ActiveSync.
Download the current language ROM from the provided link, unpack, , and follow the instructions.
This official tool will do everything for you!
When it completes (~30 minutes), your phone will be unlocked.
After that if you need to change the language, follow this instructions:
How to change the language in your iPaq:
Here is the detailed process completed, borrowed from Barr :
1. Download and extract BOTH current and desired ROM language pack from HP site to the computer. Unpack them to different folders.
2. Establishing connection with the computer, copy EnterBL.exe (from desired language ROM folder) to the mydocument folder of the PDA.
3. Run the EnterBL.exe from the PDA. (Now your PDA will go to Bootloader mode).
4. (before executing step 4, prepare for step 5 since step 5 will have to be executed right after step4). From your PC, start updating the current ROM by lunching hpRUU.exe of the current installed language of your PDA.
5. Right after step4, when it will start updating, copy all the data (*.nbf) files of desired/intendedlanguage ROM pack to the current ROM pack. (the Rradio.nbf may be skipped if the device is already unlocked).
6. At the end of copying, it might show an error message, press OK to ignore.
7. The phone will restart!

Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
Same here i reflash again last night but upgrade process fails on .02%

Change OS version on a Qtek 9100

Hello. Can I use the Wizard Service too Qtek 9100l to change only one OS version from version 5.1 to 6.1 without change for SPL or IPL? I have a G4. Somebody help me to change the version in Windows Mobile 6.1 software. I mean this way can not use an upgrade program like "ROMUpdateUtility_Wizard_NoID.exe" because the connection to USB phone is down after the restart in Bootloader. Thanks in advance.

samoilenco said:
Hello. Can I use the Wizard Service too Qtek 9100l to change only one OS version from version 5.1 to 6.1 without change for SPL or IPL? I have a G4. Somebody help me to change the version in Windows Mobile 6.1 software. I mean this way can not use an upgrade program like "ROMUpdateUtility_Wizard_NoID.exe" because the connection to USB phone is down after the restart in Bootloader. Thanks in advance.
Click to expand...
Click to collapse
hi there, look, you have to "unlock the device", then you will be able to flash a new rom.
but first read, and read again be4 doing anything.
(use the search button)
Good luck!

What?
Yes. thanks .. very encouraging .. The idea is that one time I failed and I left the phone without OS had to attend a service to do a new reinstall the software. But give me some details how to proceed? Thanks a lot.