Database Develop

Best Rom for my T-Mobile Vario

I got now:
IPL, SPL: 1.03
GSM: 1.4.10.0
OS: 1.3.2.3
ROM versie: 1.3.2.3 NLD
Radioversie: 01.04.10
Can you tell me.. do i need to upgrade? What will be better when i upgrade?
With which ROM do i need to upgrade?
Please help.

Qtek ROM version 1.6.7.1
In my humble opinion; Qteks 1.6.7.1 ROM is the most stable ROM to date. Everything works perfectly for me with all my 3rd party software installed too!!
PS if you haven't already done so, you can totally unlock your phone from T-mobile by following the following instructions. Also do searches for the quted software (download them first):
mackaby007 said:
abgarman said:
hey mackaby007!
I wonder whether you had any problems during new rom installation...
I tried this ROM, but after the installation was finished, Etx_rom installed and system rebooted I got a "device locked message. illegal ROM, given only to customers who bought their wizard/qtek at ...[]" I had to go back thru several instals to restore my original ROM (which i never truely accomplished - i have no ability to change ring tones and assign them to different contacts)
Click to expand...
Click to collapse
Hey back at ya.
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Hope this helps. let us know how you get on.
Click to expand...
Click to collapse

I searched the whole forum.. I i unlocked my Vario 15 minutes ago. Thanx a lot!!

Re: Qtek ROM version 1.6.7.1
Will the follwoing also work with the Cingular 8125. I haven't SIM unlocked it yet. Also, is a SIM unlock the same as a CID unlock. Is there tow different things that need to be unlocked. And which do I do first, if there are two things that I must unlock. Thanks for the help...and sorry if this questions has been answered before...
-OnImpulse-
mackaby007 said:
In my humble opinion; Qteks 1.6.7.1 ROM is the most stable ROM to date. Everything works perfectly for me with all my 3rd party software installed too!!
PS if you haven't already done so, you can totally unlock your phone from T-mobile by following the following instructions. Also do searches for the quted software (download them first):
mackaby007 said:
abgarman said:
hey mackaby007!
I wonder whether you had any problems during new rom installation...
I tried this ROM, but after the installation was finished, Etx_rom installed and system rebooted I got a "device locked message. illegal ROM, given only to customers who bought their wizard/qtek at ...[]" I had to go back thru several instals to restore my original ROM (which i never truely accomplished - i have no ability to change ring tones and assign them to different contacts)
Click to expand...
Click to collapse
Hey back at ya.
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Hope this helps. let us know how you get on.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Re: Qtek ROM version 1.6.7.1
OnImpulse said:
Will the follwoing also work with the Cingular 8125. I haven't SIM unlocked it yet. Also, is a SIM unlock the same as a CID unlock.
Click to expand...
Click to collapse
I don't know if this will work with the 8125, but If under 'Start/Settings/System/Device Information/Identity' it says 'WIZA200', i would assume so, as it was created for the HTC Wizard, but I'm not sure.
As for totalyy unlocking your phone, YES it will. CID Unlock did it for me, but I'm not the developer of this software so am not in the best position to advise if it is suitable for anything else other than a Wizard.
Hope this helps.

I get te following message when I run lokiwiz.bat
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Click to expand...
Click to collapse
The device does not reboot and the ROM upgrade afterwards fails. Any tips?

hav0c said:
I get te following message when I run lokiwiz.bat
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Click to expand...
Click to collapse
The device does not reboot and the ROM upgrade afterwards fails. Any tips?
Click to expand...
Click to collapse
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!

ROM
When I double click on the new Rom, does it erase everything on the Vario (Programs) ?! Do I first have to sync and then put the new rom on it !?
what r the main diffrences between the roms ?
I have a T-Mobile Vario with a german rom and I'm thinking about putting the RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship or the
RUU_Prodigy_1060701_101_11310_QTEK_GER_Ship
on it, which one is better and again what r the differences between those two and the original ?
or is there even a better one !?
greetz

Absolutely 100% perfect working tutorial. CID unlock worked as did the new ROM. I too changed form MDA T-mobile NL version to Qtek WWE one.
Great tips. Thank you very much, you just saved me a few 100 euro's, and I got a device which is useful and faster.

[Q] unlock rom image for hp 6515

Hi
I have a cingular hp 6515a . I cannot unlock it.I need an unlock hp 6515 rom image.please help me.

Unlock hp 6515
Thats very easy.
1: Download the (upgrade and unlocked) ROM from HP's website
2: HardReset your phone, but leave it in the first welcome screen (before the align screen and so)
3: Connect the phone to your PC, and wait for the connection to be established.
4: Run the downloaded Upgrade package (from HP), the phone will show a bootloader-screen.
Sometimes, the phone will not accept the upgrade program.
In that case do the following, but nothing else!
1: Disconnect the phone and soft reset it (it will come back into the bootloader)
2: Close the HP-upgrade program with taskmanager on your PC
3: Reconnect the phone to the PC
4: Rerun the HP ROM upgrade program.
Now your phone will show its upgrade status. It will take a while (about 20 minutes or so), but afterwards you will have a clean unlocked 6515.
I did this with several locked phones (especially Vodafone) from international sources.
Above will work fine, on every PC with Active-Sync (in my case 4.5) installed.
I assume, you will have a backup, made by the SIP-backup program on one of your memory cards. You can restore it after you've upgraded your phone

SKU error,, did not work

Unlock HP 6515
Did you use the rom you download here: HP 6515 ROM upgrades ?
I did it again today, but with a soft reset of the 6515 and shutting down the upgrade program with taskmanager. Do NOT Hard-reset the device or reboot your computer! Before restarting the upgrade, the computer has to reconnect to the 6515 although it is in the bootloader mode.

My hw6515 is dead after the upgrade to 1.21
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.

Has anyone managed to get this to work on a 6515 "A"? When I tried it I got an error message that said something like "Incorrect device SKU". I then decided to try upgrading to 1.20 which went smoothly. However, I still get the same SKU error message when trying to upgrade to 1.21. Is there a way to force it into bootloader mode? Anyone know some trick that I'm missing?

ROM Update 6515
SKU-error means wrong language.....

deivasankar said:
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Click to expand...
Click to collapse
Retry the update, or downgrade to 1.20

I Think Not..............
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............

Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.

cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
I've done it several times. The HP Roms contains also the RadioROM.
If you just think it cannot done... Why don't you give it try...

Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
What language do you use?
For WWE you wil find v1.21, v1.20, v1.12 and v1.00 here.

SKU ERROR help pls

cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
So how can we solve this problem?

Unlock and language change- this is how it worked for me!
This method worked for for an iPaq hw6515 after many long nights, but may be good as well for others:
Do this only from an Windows XP OS.
Make sure you have up to date ActiveSync from Microsoft!
To Unlock,
Just reflash your iPaq with the THE SAME language from HP official support site: h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=501212&lang=en&cc=us &prodTypeId=215348&prodSeriesId=501209&taskId=1 35
Connect your PDA to the computer and check it is in state connected in ActiveSync.
Download the current language ROM from the provided link, unpack, , and follow the instructions.
This official tool will do everything for you!
When it completes (~30 minutes), your phone will be unlocked.
After that if you need to change the language, follow this instructions:
How to change the language in your iPaq:
Here is the detailed process completed, borrowed from Barr :
1. Download and extract BOTH current and desired ROM language pack from HP site to the computer. Unpack them to different folders.
2. Establishing connection with the computer, copy EnterBL.exe (from desired language ROM folder) to the mydocument folder of the PDA.
3. Run the EnterBL.exe from the PDA. (Now your PDA will go to Bootloader mode).
4. (before executing step 4, prepare for step 5 since step 5 will have to be executed right after step4). From your PC, start updating the current ROM by lunching hpRUU.exe of the current installed language of your PDA.
5. Right after step4, when it will start updating, copy all the data (*.nbf) files of desired/intendedlanguage ROM pack to the current ROM pack. (the Rradio.nbf may be skipped if the device is already unlocked).
6. At the end of copying, it might show an error message, press OK to ignore.
7. The phone will restart!

Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
Same here i reflash again last night but upgrade process fails on .02%

Can't connect with USB

Just received a used Mteor. At first glance, it is normal, IPL is 0.90 and SPL is 2.05.
I want to upgrade to WM6.1, but...
Every time I am in the bootloader, I can't connect : no "USB" on the bootloader screen, no communication with the PC.
It is the case with the regular bootloader, or with the "modified by DES" one.
And I can't get MTTY nor Teraterm to talk with the phone
But ActiveSync is working without a glitch through USB...
Have you ever seen that ? Any advice for me ?
Thanks in advance !

Why don't ya check in here: http://forum.xda-developers.com/showthread.php?t=383244 ? =)
and when ur there, download this: http://rapidshare.com/files/109239690/MTeoR-FutureShock-WM61-96dpi-2.61.0004.0.rar
and while ur waiting for the download, read this:
darkDirk said:
First of all:
It's fantastic what you are doing with wm6.1 and the Breeze, Futureshock !
I am new and trying to upgrade it myself, but at first I didn't have any luck.
Here is a simple newby step-by-step manual:
- Download and extract a MTeoR-FutureShock-WM61-xxxx.x.rar
- Check your Mteor battery in more then 50 % full
- connect the Mteor to the computer via usb and check if Activesync works
- go with DOS (cmd line) to the directory and start runme.bat
- On the Mteor press camera and powerbutton at the same time.
- then immediately press any key on the computer to continue the batch script.
- now you should see the 3-color bootscreen
- press any key to start the rom-update program and follow its directions.
When the update is finished (in less then 5 minutes), then wait untill the first boot is complete.
If you don't get the 3-color bootscreen or you the update on the Mteor stays on 0 % and the rom-updater displays an error, try testing this:
On the Mteor start the explorer and in the root directory (press UP once) find SSPL.EXE en start it.
If the Mteor won't start the program and there is an error like "insufficient trustlevel".
You need to remove the application lock on your Mteor.
Run SDA_ApplicationUnlock.exe on your PC with Activesync working and then install SP_AllowCertificateInstall.cab on the Mteor.
You will find those two in the .rar in ".\opt Software\Unlock Tools"
Then redo from the start.
Then, Have fun !! (Futureshock & DarkDirk)
P.S. works on a BREE100 with IPL-0.90 and SPL-2.05.
Click to expand...
Click to collapse
I bet it will help you out a bit
And since ur writing ActiveSync I understand that you have Windows XP. Right?

MobileSixx said:
Why don't ya check in here: http://forum.xda-developers.com/showthread.php?t=383244 ? =)
and when ur there, download this: http://rapidshare.com/files/109239690/MTeoR-FutureShock-WM61-96dpi-2.61.0004.0.rar
and while ur waiting for the download, read this:
I bet it will help you out a bit
And since ur writing ActiveSync I understand that you have Windows XP. Right?
Click to expand...
Click to collapse
Yes, I tried all that, but couldn't get past the bootloader step : the rom update failed (com error). After, I tried to understand why, and narrowed the problem to the USB connexion.
Yes , I use win XP, and I just tried on another computer, with the same result.
It may be :
- a failure of the hardware ?
- a limitation of my IPL - SPL ?
- a sort of lock of app or radio or OS ?
- ???
Thanks for your time for helping me !

Ok... Hmm what about upgrade the radio ROM first then?
http://forum.xda-developers.com/showthread.php?t=386719
And to do that, do it with this:
futureshock said:
ok i found it i didn't read further the 1st page on sspl thread
edit:
have repacked it with runme.bat and 77.7er SSPL ...
Radinly_1.54.30.10
Click to expand...
Click to collapse
It worked fine for me =)
GL

Working ! !
Ok, it worked !
I can't explain what, but today the USB connexion works, and I'd been able to upgrade to 6.1, following advices.
It was really woth the pain, and I'm ipressed with the futureshock ROM : wouahou !
Thanks !

If someone else experince this problem:
Remove memory card as it has flashing priority in SPL, so it doesn't even try to connect to PC.

sorry....
i got wrong address..

step by step guide to liberate > hard spl > flash Rom

Ok to help the new users on this site iv decided to put toghther a guide on how to liberate > hard spl > flash Rom for your shift.
Step one
liberate your HTC shift
heres some great instructions with a video of the whole process
http://www.modaco.com/content/forum/266537/View-Topic/
at this stage you do not need to go an install IE/Office etc you just need to liberate the device so you can use the USB tools.
step two
make sure USB tools is working run this on your Snapview side and on vista windows mobile device centre should open up and ask you to link your device(no harm i followed through and unticked all boxes.
step 3
follow these instructions on this thread to hard spl your device.
(now at this stage when you are following these instructions make sure on your snapview side that you have disabled your modem and USB tools is running and you have the 2 arrows at the top)
on vista side make sure your device centre has picked up your device. Also do not have any USB devices connected to your shift (as this causes a problem and hangs with a disabled USB message!!!)
follow these instructions---
http://forum.xda-developers.com/showthread.php?t=406606
Step 4 (almost there)
download a rom of your choice
my current fav is i00's rom
http://forum.xda-developers.com/showthread.php?t=480525
extract the rom you should have 2 files in the folder
CustomRUU.exe
RUU_Signed.nbh
if you can only see one file open winrar and then go through win rar to extract -
run the .exe adn thats it.
if it fails ....
on vista bring up comm manager click on advance and reset snapVue
check to see if its restarting and then restart vista
now first go into vista
launch device windows mobile device centre
click on mobile device settings
connection settings
untick allow USB connections
now go into snap view run USB TOOLS
give it a minute
go back into vista
run the rom update......
if you follow this through each stage the steps will make sense to you eg USB tools etc
good luck
__________________

Thanks, added to Shift FAQ

dear i need your help
i hope you can
i will be so greatful for you so much
i did all the steps above with every thing ok
but the last one i could not flash a new rom
from here
http://forum.xda-developers.com/showthread.php?t=480525
Update 20090307
Update 20090309
i did try every thing but the CustomRUU.exe file could not run
i do not know why is that
i really think that i have tried everything
but for sure i have been missing something
would you please tell me the steps or what to do ?
N2h said:
Ok to help the new users on this site iv decided to put toghther a guide on how to liberate > hard spl > flash Rom for your shift.
Step 4 (almost there)
download a rom of your choice
my current fav is i00's rom
http://forum.xda-developers.com/showthread.php?t=480525
extract the rom you should have 2 files in the folder
CustomRUU.exe
RUU_Signed.nbh
if you can only see one file open winrar and then go through win rar to extract -
run the .exe adn thats it.
if it fails ....
on vista bring up comm manager click on advance and reset snapVue
check to see if its restarting and then restart vista
now first go into vista
launch device windows mobile device centre
click on mobile device settings
connection settings
untick allow USB connections
now go into snap view run USB TOOLS
give it a minute
go back into vista
run the rom update......
if you follow this through each stage the steps will make sense to you eg USB tools etc
good luck
__________________
Click to expand...
Click to collapse

i did solve it
you have to run the file by clicking right click on the file and run as adminsterator

HTC USB Tool
I cannot attach the unit, is there a proces to troubleshoot the usb tools

on the vista side in comm manager make sure that you have turned off wifi - modem - bluetooth, then click on advance and reset snapview, then reset vista and try again once its all loaded up, if it still does not work, uninstall mobile device manager on vista and reinstall again, treat it exactly the same as if you where having issues trying to connect your phone via cable to your laptop/pc....

Is there a Hard SPL for the CDMA Shift ? Do any of the cooked roms work in the CDMA version ?

HELP ME
excuse me for bad english
then
- i liberate the snapvue
- i hard spl my device
snapvue is as after hard reset
i havent usb tool
how to connect snap vue to vista
i must liberate again ?
i'm in a loop
in fact custum ruu does't open
HELP ME

Same problem with me too...Please help us.
Same problem with me too...Please help us.
albyboy said:
HELP ME
excuse me for bad english
then
- i liberate the snapvue
- i hard spl my device
snapvue is as after hard reset
i havent usb tool
how to connect snap vue to vista
i must liberate again ?
i'm in a loop
in fact custum ruu does't open
HELP ME
Click to expand...
Click to collapse

always back to initial snapvue after hardSPL
Hi, same kind of situation here.
I have a problem when trying to HardSPL my shift:
rom version 1.30.414.1 wwe
rom date 02/26/08
radio version 1.58.21.23
protocol version 25.65.30.04H
liberated, UsbTool & SoftReset work well
IE, office mobile, total commander, notes installed & work fine
enableRapi OK
but when proceeding with ShiftHardSPLFinal, when it flashes, It goes from 0%
to 100% within 2 seconds and after the shift reboots, I have the original snapview !!!!!
I did it 3 or 4 times, same result.
followed http://forum.xda-developers.com/showthread.php?t=406606&page=16 post # 158 - Cmonex: took battery out, and post # 160 - KOS : uninstalled Origami, disabled UAC,
still same problem : instant install of version 1.00xxx, and ......... back to initial snapvue, ( not liberated)
would you have any idea ???
thanks for your help

dude if it goes from 0-100 in a few secs may be it was a correput download- re download and try again-
sorry cant be more help at the moment - i no longer have a shift-

N2h said:
dude if it goes from 0-100 in a few secs may be it was a correput download- re download and try again-
sorry cant be more help at the moment - i no longer have a shift-
Click to expand...
Click to collapse
Thanks I had not thought about this possibility, too much focused on complex possibilities, I will try again.

vilus said:
Thanks I had not thought about this possibility, too much focused on complex possibilities, I will try again.
Click to expand...
Click to collapse
EDIT: nope, with freshly downloaded ShifthardSPLfinal file, same problem.

vilus said:
EDIT: nope, with freshly downloaded ShifthardSPLfinal file, same problem.
Click to expand...
Click to collapse
Hi all, sorry for my english.
My experience is almost the same. In my opinion the HSPL process is not progressively indicated, but it happens regularly. Moreover, an hard reset follows the precess, thus, at the end, me too found WM in factory default mode. I liberated WM again, but till now i wasn't able to flash another ROM just to check if my Shift has been HardSPL'ed.

After many days without sleeping , i've just made the first call with my shift. Thank you, thank you and thank you.
we are waiting for keyborad solution, it's AZERTY but it shows QWERTY when typing.
Thank for all you did, you do and you'll do for us.

HELP!
I have been searching for possible solutions but cannot find one. Is it possible to Liberate a shift without a working sim card. I left ATT for Sprint years ago, so I do not have an active sim card.

Hardspl, ApplUnlocker, Romupdate

Ok, i've tried everything that i've read in these threads, but am not having any luck.
I've got an HTC Breez (rom 1.13.251.2, radio 1.06.00.10, spp -2.05), and i'm trying to update it to WM6.1.
i've tried to use Hard SPLV7, which tells me that my phone needs to be application unlocked.
Then i tried to use AppUnlock-Check.zip (ApplicationUnlock.exe) to unlock it. But that tells me that my phone cannot be unlocked.
So, can someone please help me to prepare my phone to be rom updated? Please? This WM5.0 is not very nice!
thanks in advance for any help.

Ok, some progress. Based on this method i got the phone application unlocked.
However, when running the Hard-SPL-V7 it runs through until i give the last ok, then looks like it's running, then crashes. So no luck there.
Question: i am assuming that i need hard-spl prior to loading a new (WM6.1) onto the phone, correct?
thanks.

Hello out there. Is there no one that can lend me a hand? A hint?

He,,
You still need help?
Wich windows are you using? rom update only works with winXP...
You can search for updating using sdcards

Ah, hello!
I am using Win xp, and it did not work. Can you tell me exactly which version of Hardspl i should use?
thanks

You could try this one:
http://forum.xda-developers.com/showthread.php?t=552567
Tell me if you got hard SPL to work with this one. Follow the instructions on that page^^
There is also an update program wich automatically put your phone in sspl mode:
http://rapidshare.com/files/110014028/MTeoR-FutureShock-WM61-1.61.0004.0.rar
But,, if I where you I should first put Hard-SPL on your phone couse else you could brick your device.

Hello, and thanks for this. Problem is that the only SD card that i have is 4 gb, which does not work with the breeze!
Do you have any other way of making the 1st method work?
thanks for your help.

Download both files of my post above.,, In one of them you find the update program. In this folder you found an NBH file or something.., Delete this one and copy the NBH file of the other argive to this folder. I'm not sure if you have to rename it to the name of the NBH file you just deleted...
Connect your device over usb with active sync Then run the bat file.

Hmm, does not work! Any other suggestions?

Does active sync connect to your phone?
Wich application unlock tool did you use?