downloaded orginal rom from www.htc.com - 8125, K-JAM, P4300, MDA Vario Software Upgrading

and still having problems.. at 95% is it says error. and says to check my nk.nbf file...... i have a g4, and i cant get ANY rom to work period. and its starting to piss me off
any anwsers?? on what i need 2 do?

I had the same problem with my G4 a while back. I wound up cooking my own ROM to fix it. You will need a ROM without the IPL/SPL in it. If it's not already dead, pull the battery. The bootloader screen will drain the battery relatively quickly, and the phone will not charge in that state.

downgrade to button's 1.xx ROM (on FTP here ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe) at least TRY a CID unlock using LokiWiz or aWizard and then flash back to original.

baarod said:
downgrade to button's 1.xx ROM (on FTP here ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe) at least TRY a CID unlock using LokiWiz or aWizard and then flash back to original.
Click to expand...
Click to collapse
its a G4.. it cant be unlocked

Try molski's rom. I have a G4 8125 and that is one of the few that would load correctly for me. Just make sure you get the version he made for g4 users. you will have to input your carrier specific stuff, like gprs, but it loads.

cptcafne said:
Try molski's rom. I have a G4 8125 and that is one of the few that would load correctly for me. Just make sure you get the version he made for g4 users. you will have to input your carrier specific stuff, like gprs, but it loads.
Click to expand...
Click to collapse
ive tired that rom.. and it will not work for me.. i dont know if its becuase i installed a different cooked rom first or what... but i install his 30mb G4 rom.. and i end up with red, blue and green screen after

I don't have his 30 meg free one, I have RUU_Molski.Biz_226102_22610105_022511_G4_WWE.exe loaded. so far it has worked fine, and that was after I had tried a few other cooked roms that did not installl correctly.

cptcafne said:
I don't have his 30 meg free one, I have RUU_Molski.Biz_226102_22610105_022511_G4_WWE.exe loaded. so far it has worked fine, and that was after I had tried a few other cooked roms that did not installl correctly.
Click to expand...
Click to collapse
hmmm, i have the same one.. but mine says 30mb... anywho... my batt is almost dead cuz i let it sit on the bootloader screen... so now i dunno wtf 2 do... i might just charge the battery on my friends 8125 and go from there

cptcafne said:
I don't have his 30 meg free one, I have RUU_Molski.Biz_226102_22610105_022511_G4_WWE.exe loaded. so far it has worked fine, and that was after I had tried a few other cooked roms that did not installl correctly.
Click to expand...
Click to collapse
did all of the xtra programs install??? like total commender and all that ****? or what.... i get confused with all thos .cabs and **** being inthe extended rom.. *shrugs*

it is a clean rom, more or less. You can either get it from the XDA ftp, or Molski web site, www.molski.biz. Yes, it is a slight pain to reinstall everything, but at least your phone will be up and running.

cptcafne said:
it is a clean rom, more or less. You can either get it from the XDA ftp, or Molski web site, www.molski.biz. Yes, it is a slight pain to reinstall everything, but at least your phone will be up and running.
Click to expand...
Click to collapse
clean rom means no extra programs installed right??? and molski took out all that other cingular **** i dont need.... and also.. i have cingular.. i know how ot set up the media net settings.. but as far as mms.. i dont know... also do you have AIM?

there is a cab you can install for the MMS, and I have aim, but not while I am at work. Which is where I am right now.

Related

---Problem--- Official Cingular 8125 2.25 Update

I have never flashed this phone with any kind of alternate firmware, yet when I go to run the official one from HTC, I get this at 8-% exactly, on 2 diffrent phones:
_______________________________________________________________
ERROR [326]: INVALLID COMMAND
This NBF file cannot be used with for your PDA Phone. Please check you NBF file.
_______________________________________________________________
Then the phone turns into a brick. All it does is show the Tri-Color test looking screen untill try to flash again...
Any suggestions?
What phone do you have?
Whoops....
Sorry... I posted this in the wiz forum and didnt even think to put my phone model....
Cingular 8125
Thank you!
Re: Official Cingular 8125 2.25 Update ---Problem---
pittaman said:
I have never flashed this phone with any kind of alternate firmware, yet when I go to run the official one from HTC, I get this at 8-% exactly, on 2 diffrent phones:
_______________________________________________________________
ERROR [326]: INVALLID COMMAND
This NBF file cannot be used with for your PDA Phone. Please check you NBF file.
_______________________________________________________________
Then the phone turns into a brick. All it does is show the Tri-Color test looking screen untill try to flash again...
Any suggestions?
Click to expand...
Click to collapse
If you are attempting to flash the official ROM on an 8125 and getting this error, there's some bad juju goin on.
Just to be sure, you got the following ROM, correct?
http://www.htcamerica.net/support/software_downloads_8125.htm
I’ve downloaded that so many times my browser is upset at me. There must be a lot of bad JuJu... because It has tanked 2 different phones.....
I’ve taken your 2.3 update, and ran it... It went though... got to 98 and turned red on the phone... finally went to 100% and rebooted... but it was still at 1.8... but at least the phone works again... I really need the push e-mail though... and would prefer to use the official update... or a close derivative..
You should CID unlock first before you apply any ROM found in this forum.
If your phone is virgin, i.e. never been updated to a non official ROM, you will be fine going from 1.8 to this ROM and you would not need to CID unlock. I have gotten an nbf error before, but it was from an attempted downgrade to the stock 1.8 ROM from Summiter's 2.17 release.
Check your OS version and report back.
I know it says you have never upgraded before... If you're still having problems, just take it back to the store, we bricked a phone stuck on the 2.17 ROM and returned it with no problems. Apparently the 8125 does not like animated themes (not my idea, but it did have entertainment value).
Could there be something up with my PC if it bricked 2 seperate phones? WOuld it be possible to fix em with a diffrent PC? and do you think a Cingular store would update the firmware on the phone if it wasnt broken already?
pittaman said:
Could there be something up with my PC if it bricked 2 seperate phones? WOuld it be possible to fix em with a diffrent PC? and do you think a Cingular store would update the firmware on the phone if it wasnt broken already?
Click to expand...
Click to collapse
There's always the possibility of a virus causing issues, but it's exceedingly remote.
If the phone is working you should be able to bring it into any Cingular store and have them do the update for you.
pittaman said:
Could there be something up with my PC if it bricked 2 seperate phones? WOuld it be possible to fix em with a diffrent PC? and do you think a Cingular store would update the firmware on the phone if it wasnt broken already?
Click to expand...
Click to collapse
I concur with gamescan that it might be a virus, or some crappy spyware. I don't think however that you've "bricked" your phones as you WERE able to install sumitter's 2.23 OK. Of course since you didn't SID unlock you didn't get the full upgrade. I disagree with those who insist that you don't need to unlock. Mayhaps you don't need to but I know that sumitter and the other ROM gawds here have always suggested so. If I was you I'd downgrade to the 1.05, unlock, then upgrade. I'd also scan your PC with Spybot, maybe AdAware. Also I'd delete my temp files, in the c:\documents and settings\%username%\local settings\Temp. Also empty your temporary internet files. I've seen large temp folders on PC's create all kinds of grief. Just a suggestion.
Steven
chow
Well... I appriciate all your help thus far.
I called Cingular Yesterday ant they sent out 2 replacement phones for free, and I got them today... With the update already in place, so I dont think I'll be playing with unlocking again LOL... But this information is very helpful, as my Uncle has the same phone and needs the push email more than I do. If his phone gets toasted, Ill be here with the results...
Thank you all very much... this is my new favorite place!!!
Not A virus .... its the phone
Apparantly the newer phones have a new flash chipset G4 which is not compatable with the current crop of cooked roms on this site. I think summiter has one that will work but it didn't work for me. I returned my phone for a replacement hoping to get the g3 chipset but to no avail all the new ones are G4 and are unable to be flashed to the custom roms. also you should be able to sim unlock with no issues but to cid unlock you may need to look elsewhere
Re: Not A virus .... its the phone
alynch75 said:
Apparantly the newer phones have a new flash chipset G4 which is not compatable with the current crop of cooked roms on this site. I think summiter has one that will work but it didn't work for me. I returned my phone for a replacement hoping to get the g3 chipset but to no avail all the new ones are G4 and are unable to be flashed to the custom roms. also you should be able to sim unlock with no issues but to cid unlock you may need to look elsewhere
Click to expand...
Click to collapse
First, the OP was using the OFFICIAL CINGULAR UPDATE not a custom Rom.
Second, He was upgrading from 1.8 which is a 1.x Rom, this means his phone is indeed a G3 variant as the 1.x Roms only have G3 IPL/SPL.
I had this same experience from a virgin HTC 8125....
I had stop all apps running and recharge my battery. Then disable my sleep and screensaver then it worked.

im looking for : CUSTOM__RUU_Wizard_1050412_WWE_

hi all
i tried to download the file ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe from the unlockung topic then it failed
seems to be removed
somebody have please upload it on any server except rapidshare
like : http://www.quicksharing.com/
or http://www.up4world.com/
my device now unusefull , so please help me
thanx in advanced
http://download.yousendit.com/FF900F2908E9D05B
Thanks for the info.
Hi there everyone
Greetings from Paris
I encountered the same problem. The file was not there anylonger. Then I saw this post, and its reply. I downloaded the file on http://download.yousendit.com/FF900F2908E9D05B which worked fine.
I ran the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe file.
So far so good, and then the process crashed at 98%. Something about a file in outlook. I started the whole process again, and now it just stalls at 98%. No error message. NOthing. Anybody have any idea what I should do now...
I have an Orange SPV 3000. I can put the new rom back but I wanted to do a cid unlock, before doing so. It seems to be necessary to be able to try out different roms...
Thanks.
Paul Bourbon said:
I have an Orange SPV 3000. I can put the new rom back but I wanted to do a cid unlock, before doing so. It seems to be necessary to be able to try out different roms...
Thanks.
Click to expand...
Click to collapse
I never have to downgrade before I do the CID unlocked. I've tried with two MDA and never encountered any problem. You will only need to downgrade if you CANNOT CID unlocked; otherwise, don't bother to downgrade.
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Paul Bourbon said:
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Click to expand...
Click to collapse
When downgrading with this ROM...it will stall at 98% for a few minutes...be patient. To confirm that the ROM I posted was legit...I used it again myself and worked fine. Then to make sure it wasn't just me...I had 2 other people tell me they used it and worked fine for them as well.
Don't know what to tell you as this is the ROM that was hosted on the FTP site for a long time.
shell tool
If your having trouble flashing a rom the shell tool posted on the g4 threads lets you flash any rom you wish onto your phone i have a g4 cid locked and using the tool i can swap my roms every day if i wished to with no hassle
http://rapidshare.com/files/17787647/ShellTool_bugfixed.zip
Paul Bourbon said:
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Click to expand...
Click to collapse
Get yourself a signature. Is your Wizard G3 or G4.
I think that my wizard is a G3. I just added my signature.
Still looking for the mysterious file that apparently is no longer posted on this site.
thanks for any info.
i need a rapdishare or megauploads link to where i can download a 1.xx ROM for my G3 Qtek 9100 (Tmobile with imate 2.21 ROM).
I want to upgrade to wm6 and need to have a backup plan if it fails
10x in advance.
j3d1n4s7y said:
http://download.yousendit.com/FF900F2908E9D05B
Click to expand...
Click to collapse
thanx for uploading , but sorry this server blocked on our country
if any one can upload it again on the servers which i linked on the first post
thanx in advanced
looking for BUtton 1.05
this rom is not working for me. I stalls at about 98% of the process, and dies...
If you decide to do it, make sure you have a back up option.
Do a search on PirateBay for it. Its seeded...
i found the file
thanx for all
my device unlocked

Problem: flashing 8125

hello i recently tried flashing my cingular 8125 with the crossbow rom and went all good until it stopped at 96% were i got a error and was instructed to recover bla bla. the bootloader was recovered and it still connects to my computer with usb...but ever time i try to restart the rom flasher i get ether a 300 error wrong updater or a 274 error comunications. i have looked and looked but cant find anything on what to do. if you have any info that could be of help it would be GREATLY apreciated. thanks in advance.
ps. sry if i did something wrong....first post...
Is your device a G3 or G4?
You probably need to flash an official rom again (Try the T-Mobile one, if that works then you are CID unlocked. If it doesn't then flash the Cingular one and then do the CID Unlock again _IF_ this is a G3).
If neither of those work, download the Wizard Love ROM (Search on PirateBay for Wizard_Love) and try flashing it, and then downgrading and CID Unlocking from it.
Good luck
8125
umm im pretty sure its a G3, i went by the thing on this website that says if it has xx 2 zeros then its G3 and xxx 3 zeros G4.
umm ive tried the offical HTC 8125 update but it doesnt work ether...is it the same as the cingular one?
im downloading the tmobile one right now ill let you know how it turns out.
thanks again for the help its greatly aprecated
jug6ernaut said:
umm im pretty sure its a G3, i went by the thing on this website that says if it has xx 2 zeros then its G3 and xxx 3 zeros G4.
Click to expand...
Click to collapse
If you don't see .0001 (or something like that) then you are a G3. But it sure helps when people give us full details, otherwise we are just guessing (and guessing can lead to a bricked phone because we don't have the full picture).
umm ive tried the offical HTC 8125 update but it doesnt work ether...is it the same as the cingular one?
Click to expand...
Click to collapse
As long as its this one:
http://www.america.htc.com/support/8125/software-downloads.html
But HOW does it not work? What errors do you get, or what happens? Does your phone boot up into Windows? If so, what is the IPL and SPL now showing?
im downloading the tmobile one right now ill let you know how it turns out.
Click to expand...
Click to collapse
Give it a try, but if you can't get the official Cingular one to install, I doubt the TMobile one will flash either.
8125
ummmm ya....i tried the t-mobile one...and nothing...twice....and i couldnt find the wizard one....so out of desperation(even though it failed like 20 times i tried the HTC one again...)....and it worked!!! idk how...but it did....lol...its now updated.....and i dont think im going to change it any more...
hey thanks for all your help....i seriously was already looking for a 8525 on ebay...lol...but ya thanks!
jug6ernaut said:
ummmm ya....i tried the t-mobile one...and nothing...twice....and i couldnt find the wizard one....so out of desperation(even though it failed like 20 times i tried the HTC one again...)....and it worked!!! idk how...but it did....lol...its now updated.....and i dont think im going to change it any more...
hey thanks for all your help....i seriously was already looking for a 8525 on ebay...lol...but ya thanks!
Click to expand...
Click to collapse
A suggestion is to remove Storage Card when flashing, I've personally had issues with that. And if the flash fails, reboot the PC and try again. Deleting Windows temp files and a CHKDSK are also very helpful.

Problem Flashing My Imate K-jam to WM6

I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
paraozzy said:
I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
Click to expand...
Click to collapse
You know what the totally histerical thing about this is? This is the exact same reason I made my first post. LOL.
Alright I'm gonna try to help you seeing as how it doesn't look like too many others are looking here.
I have several questions first before I can help you.
1. Who is your wireless service provider? IE: T-Mobile, Cingular, Etc...
2. What Is your IPL/SPL?
Answer these 2 questions for me and I will be able to better help you.
Thanks for the quick reponse
Now the irony is i am here in nepal and i use the phone as a simple mobile phone, but as far as i know i remember flashing a T-Mobile ROM while upgrading to WM6, the IPL and SPL both are 2.26, i unlocked the device while upgrading..
Thanks
Kushal
paraozzy said:
I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
Click to expand...
Click to collapse
Hey!
ok lets c if I may be of some help here,if u r in bootloader screen than try to reflash again T-mobile 2.26 rom and if it goes alright than go on to flash any other wm6 cooked roms.
or
if it doesnt flash than i wud suggest u reflash back the buttons 105 rom to get back to ipl/spl 1.05,than again use lokiwiz tool to unlock cid & reflash T-Mobile to gain ipl.spl 2.26
hope it works out.it happened once with me also, I did the same & now I'am running wm6 XM6r3 Rom,Secondly u can use the WST TOOL by Mestrini to verify ur device status, u can even Cid unlock ur device with it, Goodluck
Yup man flashing the T-mobile 2.26 did the job..
Great thanks for the same..
paraozzy said:
Yup man flashing the T-mobile 2.26 did the job..
Great thanks for the same..
Click to expand...
Click to collapse
glade you got it up and running good luck and happy flashing

Downgraded NBD to Button, then tried to upgrade to Cingular ROM, but getting errors

Have a G3 unlocked Wizard (Cingular 8125).
Have been running different ROMS to see which one I like.
Recently stayed with NBD 8.0 for a while.
Last week battery went to heck, apparantly during a reflashing.
Probably due to the battery, I could never reflash and would always get
stuck in bootscreen @ 98%, no matter how long I charged the battery
(using stock charger and battery in-phone.)
I purchased a cradle battery charger and a new battery from ebay (which works great BTW).
Now I can flash... I think.
I managed to flash in "Xda_MiniS_LaunchROM_v154102" and my phone works.
I even got caught up on my voicemails. But every time I try to
upgrade to stock Cingular or T-Mobile, the RUU says incorrect ?nk.nbf? file.
(The actual ROM file).........What gives?
This is what comes up upon bootup.
ipl-1.01
spl-1.01
gsm-1.12.10.0
os-1.5.4.2
I'm using an XP machine with ActiveSync 4.5. Never had a problem
re-flashing before. I tried looking through the threads without success.
Any help would be appreciated.
i was going to say try that xda mini rom. thats what fixed my problem , then i was able to flash a tmobile rom. then tne wm6.
http://forum.xda-developers.com/showthread.php?t=298613 I used this thread. try the tmobile rom on g3.7
joihan777 said:
Have a G3 unlocked Wizard (Cingular 8125).
Have been running different ROMS to see which one I like.
Recently stayed with NBD 8.0 for a while.
Last week battery went to heck, apparantly during a reflashing.
Probably due to the battery, I could never reflash and would always get
stuck in bootscreen @ 98%, no matter how long I charged the battery
(using stock charger and battery in-phone.)
I purchased a cradle battery charger and a new battery from ebay (which works great BTW).
Now I can flash... I think.
I managed to flash in "Xda_MiniS_LaunchROM_v154102" and my phone works.
I even got caught up on my voicemails. But every time I try to
upgrade to stock Cingular or T-Mobile, the RUU says incorrect ?nk.nbf? file.
(The actual ROM file).........What gives?
This is what comes up upon bootup.
ipl-1.01
spl-1.01
gsm-1.12.10.0
os-1.5.4.2
I'm using an XP machine with ActiveSync 4.5. Never had a problem
re-flashing before. I tried looking through the threads without success.
Any help would be appreciated.
Click to expand...
Click to collapse
It may be the RUU you are using. Try flashing the Cingular rom using one of the RUUs I attached below. I personally have never had this problem before so this is my best suggestion.
Is it possible that somehow it got re-locked????
Also, evrytime I try to upgrade out of 1.05 ROM the RUU process stops at 85% and then says nk.nbf not for this PDA.
No, except you didn't have a successful CID-unlock (e.g. Unlock when IPL and SPL is 2.xx, and flashed to WM6 using ShellTool, then you think that you have been unlocked, which is actually not)
Update: Even though I haven't been able to load the official Cingular ROM or
the T-Mobile 2.26 ROM, I HAVE been successful in loading NBD 8.0.
I DON'T GET IT!!!!! Why would NBD load but official carrier ROMs get stuck at 85%?
Although my G3 is is currently working again, I'll still do some more experimenting.
I don't know what an extended ROM is, but I wonder if mine was corrupted
during the power failure when attempting to downgrade last week from NBD to Cingular?
I'll post my results hoping this will help others.
Edit: An hour later- I tried another official WM5 ROM form HTC, no dice. Froze @ 85%
just like the other WM5 Official ROMs. On a hunch, I tried to install the newest NBD 9.2.
IT WORKED! WHY can I install NBD ROMS but not Official WM5 ROMs?
Now the first splash screen is the *dated* green stepped graduated green from 1.05. The current info:
IPL- 2.25
SPL- 2.25
GSM- 02.25.11
OS- 6.0.0.0
Itai! This is tough!
EDIT: OK, it's now 4am and I'm seeing double....
Tried Wizard Service Tool, a very efficient program by mestrini.
Apparantly, my extended ROM was hidden. So the WST unhid it. Now we'll see what this does.
According to WST, there was no pagepool found in WM6 or WM5 location.
Could this be why WM5 updates didn't work?
4:22am, even cat gave up on me...
Sorry if I missed something here, but if you have a CID Unlocked phone and you downgrade back to a 1.xx IPL/SPL, then you will be CID Locked again when you upgrade. Anytime you downgrade to 1.xx you have to redo the CID Unlock process while you are down there before going back to IPL/SPL 2.xx or higher.
So redo going back to the Button rom, do the lokiwiz unlock, make sure both IPL/SPL are 1.xx (so you may have to flash button a couple of times) then upgrade to Cingular, T-Mo or whatever official 2.xx rom.
joihan777 said:
According to WST, there was no pagepool found in WM6 or WM5 location.
Could this be why WM5 updates didn't work?
4:22am, even cat gave up on me...
Click to expand...
Click to collapse
Page Pool is set in ROM image, not hard-coded in hardware.
mfrazzz said:
Sorry if I missed something here, but if you have a CID Unlocked phone and you downgrade back to a 1.xx IPL/SPL, then you will be CID Locked again when you upgrade. Anytime you downgrade to 1.xx you have to redo the CID Unlock process while you are down there before going back to IPL/SPL 2.xx or higher.
So redo going back to the Button rom, do the lokiwiz unlock, make sure both IPL/SPL are 1.xx (so you may have to flash button a couple of times) then upgrade to Cingular, T-Mo or whatever official 2.xx rom.
Click to expand...
Click to collapse
Didn't work. I'm certain I'm unlocked, both by lokiwiz program saying so and
Wizard Service Tool saying so. After the unlock I was successfully able to
load NBD 8.0 & NBD 9.2 ROMs, but not the official T-Mo/Cingular WM5 ROMs.
WST found the pagepool completely missing in both WM5 & WM6 sectors.
The extended ROM was also hidden. Both of those items have been corrected
so later today I'll redo the entire process just to make sure all is well.
starkwong said:
Page Pool is set in ROM image, not hard-coded in hardware.
Click to expand...
Click to collapse
Thanks. More clues to this puzzle!
Try flashing the empty extented rom. Most new roms don't have extended roms, so if your extended rom is corrupt it may be keeping wm5 to load. Which explains why NBD roms work.
goofeyass said:
Try flashing the empty extented rom. Most new roms don't have extended roms, so if your extended rom is corrupt it may be keeping wm5 to load. Which explains why NBD roms work.
Click to expand...
Click to collapse
Thanks, I just now tried this approach. I used mestrini's Wizard Service Tool to 'format' the extended rom. As of this moment I've just downgraded to Button 1.05 ROM and going to use lokiwiz's unlocker.
There is a rom out that will flash an empty extended rom without changing anything else.
http://forum.xda-developers.com/attachment.php?attachmentid=42076&d=1182515673
I have formatted the extended rom.
Then I tried to redo the Button-->Unlock-->T-Mo 2.26.
Still process stops at 85% when installing T-Mo ROM!!!
Also, the splash screen doesn't seem to be working?
goofeyass said:
There is a rom out that will flash an empty extended rom without changing anything else.
http://forum.xda-developers.com/attachment.php?attachmentid=42076&d=1182515673
Click to expand...
Click to collapse
How long are you waiting when its at 85%. I've had them stay at 85 % for over 5 minutes before.
I would recommend flashing ---->http://forum.xda-developers.com/attachment.php?attachmentid=42076&d=1182515673
???
in my opinion it is a waste of time to downgrade to flash a new/original rom...i've flashed about 100 or so roms since late 2005, multiple devices, jumping from carrier rom to latest wm5/6 builds..never had an error.
Do what you like of course, im just saying save 10 mins and flash straight to whatever you're wanting to try. goodluck and happy flashing
BTW like I said before... for those of you with dual/quad core procs, try putting the romupdateutility.exe on real-time priority and check it, I flash in roms in less than 3 mins, everytime, no errors
goofeyass said:
How long are you waiting when its at 85%. I've had them stay at 85 % for over 5 minutes before.
I would recommend flashing ---->http://forum.xda-developers.com/attachment.php?attachmentid=42076&d=1182515673
Click to expand...
Click to collapse
Is there a correct method for using those files? I installed them to the Wizard's Windows/ Startup directory & rebooted. They sorta ran, but when I checked the extended ROM with WST, it reported the extended ROM was empty =)
Now I'll go around again Button 1.04-->Lokiwiz Unlock-->T-Mo 2.26
goofeyass said:
How long are you waiting when its at 85%. I've had them stay at 85 % for over 5 minutes before.
Click to expand...
Click to collapse
Good point... HOW long are you waiting. If you are doing an RUU, you should just let it run. Official roms will "Hang" at 85%, and I've had them hang for over 5mins before also, but they always finish.
As someone used to post, you should start the RUu, then head to the kitchen, go get coffee, a snack, whatever. Just ignore the flashing process until its done...
mfrazzz said:
As someone used to post, you should start the RUu, then head to the kitchen, go get coffee, a snack, whatever. Just ignore the flashing process until its done...
Click to expand...
Click to collapse
Very well said. Lol. It's true though. If you just ignore it, it will seem to go faster. I noticed the same thing too. If you are flashing an official rom, it will almost always stop at 85%, sometimes for a long time... Just let it go and it should eventually finish.

Categories

Resources