I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
paraozzy said:
I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
Click to expand...
Click to collapse
You know what the totally histerical thing about this is? This is the exact same reason I made my first post. LOL.
Alright I'm gonna try to help you seeing as how it doesn't look like too many others are looking here.
I have several questions first before I can help you.
1. Who is your wireless service provider? IE: T-Mobile, Cingular, Etc...
2. What Is your IPL/SPL?
Answer these 2 questions for me and I will be able to better help you.
Thanks for the quick reponse
Now the irony is i am here in nepal and i use the phone as a simple mobile phone, but as far as i know i remember flashing a T-Mobile ROM while upgrading to WM6, the IPL and SPL both are 2.26, i unlocked the device while upgrading..
Thanks
Kushal
paraozzy said:
I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
Click to expand...
Click to collapse
Hey!
ok lets c if I may be of some help here,if u r in bootloader screen than try to reflash again T-mobile 2.26 rom and if it goes alright than go on to flash any other wm6 cooked roms.
or
if it doesnt flash than i wud suggest u reflash back the buttons 105 rom to get back to ipl/spl 1.05,than again use lokiwiz tool to unlock cid & reflash T-Mobile to gain ipl.spl 2.26
hope it works out.it happened once with me also, I did the same & now I'am running wm6 XM6r3 Rom,Secondly u can use the WST TOOL by Mestrini to verify ur device status, u can even Cid unlock ur device with it, Goodluck
Yup man flashing the T-mobile 2.26 did the job..
Great thanks for the same..
paraozzy said:
Yup man flashing the T-mobile 2.26 did the job..
Great thanks for the same..
Click to expand...
Click to collapse
glade you got it up and running good luck and happy flashing
Related
Can someone help me to downgrade from this rom.
I would like to put back my original one.
I already tried and I didn't managed. I have a Qtek 9100 so normaly it is unlocked.
When I tried to downgrade a got a message 296 saying that the rom is not usuable for my device.
Can someone give me the correct procedure to downgrade..
Downgrade to Button's 1.05 available Here !
Then you can "upgrade" it back to the shipped version.
Good luck!
thanks a lot.
It's worked
WOW! Quick like the bunny!
Same problem
Hi,
I have the same wish (re-install the original rom).
Like you indicate, I've downgrade... but now I can't upgrade to the original rom (i try with this one and this one)...)
Have you any idea ?
Thank a lot.
Loïc.
Resolved
Thank to Chris...
He help me in PM and I've resolved my problem...
Loïc.
link not working
Dr Puttingham said:
Downgrade to Button's 1.05 available Here !
Then you can "upgrade" it back to the shipped version.
Good luck!
Click to expand...
Click to collapse
Het the link is not working!!!!
Try this ... ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
trying to upgrade to the new t-mobile (2.26.10.2) rom
can anyone help me, i currently have mr clean installed but i cannot update to the new t-mobile rom?
what do i need to do?
Still looking for button 1.05
That link doesnt work either. I have looked all over this site for this button 1.05 and I always get this Error 550 Failed to change directory message...
Its 6 in the morning for me now in paris. I give up for now. But I have crashed my spv 3000 trying to downgrade it with a link somebody gave at some point on this site. I think I can just put back the 2.17 IPL and SPl Roms I have. But its a real bother. Anyone can help, so I can do this CID unlock., and then and only then pgrade my rom...
Paul Bourbon said:
That link doesnt work either. I have looked all over this site for this button 1.05 and I always get this Error 550 Failed to change directory message...
Its 6 in the morning for me now in paris. I give up for now. But I have crashed my spv 3000 trying to downgrade it with a link somebody gave at some point on this site. I think I can just put back the 2.17 IPL and SPl Roms I have. But its a real bother. Anyone can help, so I can do this CID unlock., and then and only then pgrade my rom...
Click to expand...
Click to collapse
That file you were given is good. ROM files are no longer posted here per M$'s request.
Typically when the install "hangs" it due to a problem with the PC, spyware would be my first guess. Also it's amazing what deleting your Windows temp files and running a CHKDSK /F can do. Try with another PC.
btw, there's a couple of good tutorials that deal with unlocking G3 devices ..
Good luck.
so i downloaded the wwe version found on the Molski.Biz site
it installed ok then after the count down to intalling the extended rom it start installing stuff then it restarts.... that was the end of my 9100 i tried to turn it back on so many times...
is there any way to fix this...
please some one respond
*sigh*
Which rom do you have in the first place.
Gotta, know more info to know if you really did brick your phone.
RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe
It looks like you flashed the wrong Rom!
Do you have a G3 (IPL/SPL 1.xx or 2.xx) or a G4 (IPL/SPL 1.xx.001 or 2.xx.001) Wizard?
If you flashed a G3 Rom into a G4 Wizard or the other way around you bricked your Wizard.
Please provide me with as much info as you possibly can about your Wizard.
Regards,
Molski
i have the g4 i think with the 2.xx.001
oh boy....so is there a way to fix it?
tell me what u need to know
I flashed my G3 phone with the wwe rom yesterday. After the flash the phone booted fine, then installed some software and my contacts, did a soft reset and bam, phone would not boot. Every time it would freeze at the post screen. I tried about 30 times, then i did a hard reset with the top two side buttons and the soft re-set. The phone then booted and has been working fine since then.
just my experience
kiteOregon said:
I flashed my G3 phone with the wwe rom yesterday. After the flash the phone booted fine, then installed some software and my contacts, did a soft reset and bam, phone would not boot. Every time it would freeze at the post screen. I tried about 30 times, then i did a hard reset with the top two side buttons and the soft re-set. The phone then booted and has been working fine since then.
just my experience
Click to expand...
Click to collapse
but mine has no power at all...
noivaj said:
i have the g4 i think with the 2.xx.001
oh boy....so is there a way to fix it?
tell me what u need to know
Click to expand...
Click to collapse
I dont know for sure if it can be fixed. Look around on this particular forum, there are a lot of topics with people with the same problem as you.
Molski
lol, gotta love it when people don't read the directions and warnings
He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
try this
Firware an old rom back on the device prefrebly the one you ohone came with and make sure you phone is cid unlocked. Also have you tried a hard reset
Force bootloader mode!
Check this out!
http://forum.xda-developers.com/showthread.php?t=294107
That worked for me and others!
Good luck!
ghailoo said:
He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
Click to expand...
Click to collapse
A couple of things to start with. First of all get you device back working. As mentioned by epimazzo above, force your device into bootloader and flash a stock ROM not a cooked one. Read the thread.
Once you have got your device working start reading before making any more rash decisions about upgrading to WM6 (especially when the file name hints that it is for a Prophet and not a Wizard). There is only one leaked Crossbow ROM for a Wizard. This has been cooked a few times (Orwell, PDAViet, Underground). There are many threads on the merrits of each ROM but you need to read read read before you end up with a brick.
Fixed Boot crash problem
Thank you Guys for all the help; I got it back running.
formatted : Push the network button and the voice button and reset then release the rest and you get the balck screen that has the press send button and that formats Wizard and then
Push the Power + Voice + Camera and I get the Red Green and White screen. quickly Update the ROM to the origunal one I have T-Mobile. It worked. You guys are the best. I found 5._Underground_edition_Crossbow_ROM But I was not able to flash it. I need to unlock the CID but I read that I would have to down grade the Wizard and then Unlock the CID. I am still looking for the old ROM.i think I found it. If anybody has a better way to Unlock the CID please tell me.
Thank you a Million tiles for all the Help guys.
I was upgrading my t-mobile 8150(?) the k-jam with the new windows mobile 6 and in the middle of it my comp crashed!! now i am stuck at the bootloader mode (3 colored screen) and when i try to redo it i get to 99% and get a 302 error message. i follow the instructions given but keeps going in circles. its a G3 so is my phone bricked or is there a way to save it? i've been looking at this site all day but am now just more confused. lol thanks for your help!
No your phone isn't bricked. As long as you can get into the bootloader screen you should be ok. What you need to do is flash an official carrier rom either tmobile 2.26 or wizard love rom after you that than you can reflash to wm6. look at the stickies in the wizard forums that is where you can find these roms.
Thanks for the info but seems my techno curse continues. I tried the wizard love rom but it was in a different language and whem i tried the tmobile 2.26 i got "error 274 connection." Any more suggestions? Again thanks soo much for an issue I'm sure has been posted here a thouand times.
This happens to me all the time. I always use the Cingular 2.25 rom, it works perfectly and I have an I-mate K-JAM. Then, do the WM6 upgrade, but ensure all of your Norton and Antivirus and background running apps are shut down. Good luck.
yes also take out your mini sd card if you have one. even though its in another language it will work. "AVANTI means next. so just keep hitting that and you will be fine.
hmm been trying to d/l the Cingular 2.25 rom but the link seems to have stoped working...
It;s aaaaaaaaaaaaaaalllllllllliiiiiiiiiiivvvvvvvvvvvvvvvvveeeeeeeeeeeeeeeee!!! for now lol Lets see what happens after i install wm6 I couldn't get the cingular rom but i had already dowbloaded the button rom i found here earlier and it worked like a dream!! quick and easy!! thank you all soooooo much!
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
flash to the tmo 2.26 or cingular 2.25...that will give you an IPL/SPL of 2.xx
then, you can flash to WM6
i want to delete this message. can't find a way to do it.
there's any other way to flash without usb cable?? sorry to bug in this thread but i lost my usb connection somehow and did a hard reset and still doesn't work. my phone charges. and no is not my computer cuz my wifes phone same as mine does sync i have a tmobile mda also known as the cingular 8125.
fallon75 said:
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
Click to expand...
Click to collapse
keep reflashing buttons rom until both ipl/spl are the same number. if they are different, then the flash didn't complete correctly. (it happens often, so it's kinda normal). just keep reflashing. after both ipl/spl are the same, then CID unlock and then update to an official carrier...then flash a wm6.
can anyone help me??
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
starkwong said:
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
Click to expand...
Click to collapse
it does shows but how can i flash?? it still won't connect o my pc. my pc doesn't recognize it. but it does recognize my wifes phone.
Try to run RUU straight with Wizard connected and running in bootloader mode
Hi Guys
I could do with some help on this one.
Ive just gone to update the qtec, ive installed SPL-3.08 to update all worked fine. The device went back into wm5 ready to update to wm6.1, clicked on the rom update it reset the device to go into bootloader and never came back on.
The New rom update wizzard came up with the recovery option but i didnt read it like a fool and now the device wont turn on.
Can anyone help with this?
Thanks Kev
sutt359 said:
Hi Guys
I could do with some help on this one.
Ive just gone to update the qtec, ive installed SPL-3.08 to update all worked fine. The device went back into wm5 ready to update to wm6.1, clicked on the rom update it reset the device to go into bootloader and never came back on.
The New rom update wizzard came up with the recovery option but i didnt read it like a fool and now the device wont turn on.
Can anyone help with this?
Thanks Kev
Click to expand...
Click to collapse
Which is your phone G3 or G4,if its a G3,did you CID unlock it before upgrading to IPL/SPL 3.08.Did you have a fully charged battery before flashing ? this cud be sign of a dead battery also.
zabardast_1 said:
Which is your phone G3 or G4,if its a G3,did you CID unlock it before upgrading to IPL/SPL 3.08.Did you have a fully charged battery before flashing ? this cud be sign of a dead battery also.
Click to expand...
Click to collapse
Thanks for getting back to me. Its a G4 I didnt bother doing the CID unlock, just went for the upgrade of the SPL. After the SPL update it went back into WM5. I left the phone over the weekend on charge but the charge light never came on.
Thanks Kev
sutt359 said:
Thanks for getting back to me. Its a G4 I didnt bother doing the CID unlock, just went for the upgrade of the SPL. After the SPL update it went back into WM5. I left the phone over the weekend on charge but the charge light never came on.
Thanks Kev
Click to expand...
Click to collapse
I believe you've bricked your phone by flashing unappropriated bootloader to it.
Attach here the IPL/SPL you flashed to see if they are indeed G3 files
mestrini said:
I believe you've bricked your phone by flashing unappropriated bootloader to it.
Attach here the IPL/SPL you flashed to see if they are indeed G3 files
Click to expand...
Click to collapse
I Used the
Mobile 6.1 ROM_Wizard_OCTAIVOI_Core_19716_v6.3_PP6MB
Build from the wizard mobile 6 part of the forum.
And the SPL is
http://rapidshare.com/files/107435245/IPL_SPL_3.08.rar.html
It worked fine on the last one i done.
Is there anyway to recover from a brick?
I asked to upload the file here because i can't access rapidshare from work...