Hi there!
My Wizard's touchscreen has some malfunction, and I want to take it to the T-mobile service. That Ok, but my MDa has a WWE Rom, and the original was a GER Rom.
I've tried several methods to downgrade my phone, but the installer says Error Vendor ID.
Anyone has any solution for this?
Please help me to take my Wizard to the service.
Mny thanks
Related
Hello all, please help me...
I have a QTEK 9100 and it only takes a couple of the QTEK RUU updates and only a couple of the I-Mate K-JAM RUU updates. Most importantly it will NOT update to the latest QTEK 9100 RUU rom nor will it not update to the latest K-JAM RUU rom either. I prefer to have the latest K-JAM rom as that is what I have in my other MDA VARIO and it's great!
Now the error I receive is Invalid Vender (vendor?) ID... I HAVE unlocked the phone (both SIM unlock AND CID unlock)... I have CID unlocked it with both aWizard AND lokiwiz and I have also installed the EnableRAPI thing.
I have done everything I have found on these greate boards here at XDA-Developers and I have found nothing to fix this problem. I am able to use custom roms as well. But I can't use the K-JAM one. ALWAYS error 294 invalid vender id.
Does anyone have any ideas?
Thanks in advance
The only thing I can suggest is that the CID unlock didn't work fully. It's worth checking the text as the lokiwiz runs to make sure the CID unlock actually goes through - see various posts under the lokiwiz thread on the general wizrd forum for information. dropping back to the QTEK Custom ROM and then running the lokiwiz has been a solution.
still no luck
At the moment I managed to put a different custom rom on there (button's custom) and even after doin the lokiwiz unlock and then attempting to put the latest imate rom still have no luck, still the same error: Invalid Vendor ID. Also i think i tried the same with the original qtek rom as suggested and had no luck... maybe someone could point me to the custom original qtek rom that would fix my problem? Maybe i used the wrong one?
Thanks in advance
I used this one CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe - it's in the FTP site area
tried it didnt work
Hello my friend,
I tried the custom rom you suggested and THEN unlocked the device again, also did enableRapi, then attempted the latest Imat K-Jam rom update and it failed with error 294 invalid vender (vendor?) id... with the red green blue screen on the QTEK 9100... For additional info it displays IPL 1.01 and SPL 1.0.1.0000
Please let me know if you have any more ideas on how to update my QTEK9100 to the latest I-Mate K-Jam rom successfully. Also, for some reason one of the older I-Mate roms updated successfully, but the latest one doesnt.
Let me know and many many thanks...
Hi,
I had the same trouble. Try this:
Load the custom rom that JoninLA suggests.
Then unlock the CID using aWizard.
Then load the original Imate KJAM ROM from the ftp site
Then load the AKU2 Imate KJAM ROM
That should work.
Should I CID unloack with aWizard in between all these updates? I would think so right?
Thanks again
I did as jasoncheesemanuk suggested... with the custom rom on there i UNLOCKED CID, then upgraded to original IMATE rom, then attempted to upgrade to latest IMATE rom (without unlocking again) and i got the same problem: error 294 Invalid Vender ID
Please help, is there a solution out there? Why is this QTEK 9100 so stupborn?
Many thanks in advance for anyone's help on this.
I have been reading these forums for about a month now. I finally bought a unlocked MDA that I am currently using with cingular. I think my phone is CID locked don't really know. I want to upgrade the rom it still has 1.8.10.2 WWE Rom, It has 01.09.10 for the radio rom. I tried to update to the newest Qtek 9100 rom but it gave me a error on the updater. Can I update to the newest T-mobile rom and not have it locked back up? Please help I tell me what to do.
Thank,
Niko
hello there
Don't load the new tmobile version...download the 8125 ROM from here:
http://www.htcamerica.net/support/cingular_8125.html
It will work and make the phone a Cingular ROM phone. I did it today and it's awesome.
If you decide to upgrade the ROM to cingular, when you get to the end of the progress bar and it seems to stop for a long time...wait longer!!! It will work.
Good luck.
Hi,
I have a Vodafone VPA Compact II (HTC Wizard) in German.
I will relocate to USA and I want to update my phone OS etc. into English (Cingular ROM).
I know that I have to first unlock my phone and I used both Lokiwiz02b and aWizard 1.3 beta 2 in order to unlock my phone. And these programs let me know that my phone is unlocked.
"Your phone is now unlocked...."
I have tried both "U. Unlock" and "C. CID Unlock (SuperCID)".
Than I have tried to install Cingular ROM "RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe" but I still get error msg 294.
Than I tried other Cingular file "Cingular_Custom_AKU2.3_Combo_Installer_V1.exe" and it was installed without any problem. But I have still German in my phone. As I understand this file installs only Extended ROM of Cingular.
Now I need to install an English ROM and when possible a Cingular one.
Any tip?
:?:
I have found a solution.
Lokiwiz02b does not work for AKU2 ROMs. I've just downgraded my ROM into an older version and than applied Lokiwiz02b CID unlock with success.
Than I upgraded my ROM into new Cingular 8125 one and works great!
help on Cingular 8125
Hello Web dev90,
Could you please tell me more about the way you upgrade your Cingular 8125 to English ,how to down grade ROM?
Thanks very much
Hello All,
I am living in israel and I bought HTC Diamond unlocked from US about 2 weeks ago, when i enter phone S/N in order to download ROM upgrade I get a message: "Sorry, this software download is not suitable for your device. " so I try to enter different S/N and finaly succeed to download: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
I tried to upgrade but I get a message: "this upgrade utility cannot be used for your pda phone"
why? does anyone had such a problem?
thanks in advance.
hello dude,
You will need to flash HardSPL first, to flash the rom.
or get the CID unlocked.
Search this site it has all the answers you need.
if you can post the seril number you used to download the rom, here so we can use it to down load roms that would be great.
hi to u 2 : )
can you explain about Hardspl?
serial I used: HT827GN20545
htako75 said:
hi to u 2 : )
can you explain about Hardspl?
serial I used: HT827GN20545
Click to expand...
Click to collapse
Everything you need to know about Hardspl can be found at the link below.
http://forum.xda-developers.com/showthread.php?t=416211
How can I know which HardSPL is suitable for my Diamond?
You can see my Diamond ver at my signature, if it is necessary for determine the HardSPL I need.
Thanks.
htako75 said:
How can I know which HardSPL is suitable for my Diamond?
You can see my Diamond ver at my signature, if it is necessary for determine the HardSPL I need.
Thanks.
Click to expand...
Click to collapse
follow the link: http://forum.xda-developers.com/showthread.php?t=415955
download tool for hardSPL
your HTC diamond will be unlocked and you can flash any ROM
With regards to attempting an upgrade using the recently released "official ROM" from the HTC website, am I correct in thinking the following:
* With a HTC Touch Diamond on Orange UK, I only need to use the SIGNED HardSPL because the phone is locked but the ROM offered on the HTC website is from HTC itself and therefore signed??
* With just this offical ROM, does the "Radio" also needed to be updated separately somehow? Or if I don't want/need to change the radio on my Diamond, then I just install the ROM update only?
Thanks in advance..
I download: Hard-SPL-Diamond-OliNex.zip
when I tried to install HardSPL it was written: 1.30 OliNex.
should it supposed to be 1.40 OliNex?
please advice.
Thanks.
In addition, I finaly take a risk and upgraded that HardSPL - it is 1.30 Olinex instead of 1.40. (I still don't understand why?)
The problem is that I tried to upgrade 3 different 1.93 ROM but every one of them don't really working it's stuck on 0% and after ~5 min I get Error 264.
Does anyone had such an Error?
please advice.
Thanks in advance.
try 1.40 oilnex
I used 1.93Olinex Unsigned for mine
Hi everyone,
Finally I succeeded to upgrade the ROM. (1.93.401.2 WWE)
The problem was that I tried to upgrade it with singed HardSPL (that is why it was 1.30 ver instead of 1.40).
Newbie life isn't so easy
Thanks to all of you.
Hi,
Ages ago I upgraded my G4 wizard to WM6.1. Now it turns out I need to put it back to WM5 - but can't find a RUU to use.
The original ROM was from O2, but that is not vital. Does anyone know where I can get a suitable RUU from? I found one that would, I think, only work with a G3 device, but have not found one yet I can use...
Cheers,
Ben
I thought I had found one, but the RUU complains that it is the wrong version (Error 300) and I get nowhere. I still have WM6.1 working fine... how infuriating :0p
Well,as you say its a G4 and upgraded to wm6.1,ok
First,how did you upgrade to wm6.1,which method did you apply to upgrade,was it SoftSPL or HardSPL ?
If you applied SoftSPL,then,just simply download official stock rom and flash it,it'll work,but if you applied HardSPL and the IPL/SPL are changed,then first you'll have to Remove HardSPL,revert back to Original Official IPL/SPL of the carrier and then you'll be able to reflash wm5,ok
Let me warn you here,if the phone is HardSPL and you flash any Official stock rom without removing HardSPL first,will 'Brick' your phone.
barkerben said:
Hi,
Ages ago I upgraded my G4 wizard to WM6.1. Now it turns out I need to put it back to WM5 - but can't find a RUU to use.
The original ROM was from O2, but that is not vital. Does anyone know where I can get a suitable RUU from? I found one that would, I think, only work with a G3 device, but have not found one yet I can use...
Cheers,
Ben
Click to expand...
Click to collapse
hi there,
Actually i had the problem with G4 on how to upgrade to WM6, I tried but no luck, haven't tried either SoftSPL or HardSPL yet but when I flashed my WM5 original ROM, I didn't have any backup at all so I kept searching answers here for days, & finally I tried the Wizard Love ROM which one of the Senior Member here said it will work. It works for me & now I'm using WM5 Wizard Love Rom with CID LOCKED.
Hope I can help u with that..
P.S.
If anybody can teach me how to upgrade my Wizard G4 (T-Mobile/MDA - black) to WM6 (any rom) or the download links for SoftSPL ONLY! they said it's safe..
Would gladly appreciate!
Thanks...
himig_natin said:
hi there,
Actually i had the problem with G4 on how to upgrade to WM6, I tried but no luck, haven't tried either SoftSPL or HardSPL yet but when I flashed my WM5 original ROM, I didn't have any backup at all so I kept searching answers here for days, & finally I tried the Wizard Love ROM which one of the Senior Member here said it will work. It works for me & now I'm using WM5 Wizard Love Rom with CID LOCKED.
Hope I can help u with that..
P.S.
If anybody can teach me how to upgrade my Wizard G4 (T-Mobile/MDA - black) to WM6 (any rom) or the download links for SoftSPL ONLY! they said it's safe..
Would gladly appreciate!
Thanks...
Click to expand...
Click to collapse
Check out this Sub-Forum,you'll get all the info about upgrading a G4 device:-
http://forum.xda-developers.com/forumdisplay.php?f=343