Hi guys,
I am guessing my problem is the fact that there is something wrong with the devices radio, more the radio rom.
I a while back flashed my dad's KJAM, and it all worked fine, he however has not used the actual phone part of the device since then, and now that he needs it, its not working.
The phone is not in flight mode, and it doesnt ask for a pin, as thats how he set it before I flashed it.
The phone keeps searching for service, and when I try to manually set the network, it keeps comming up with some or other problem.
The phone worked before I flashed it, so I am guessing it is the Radio ROM.
I am thinking of ugrading him to WM6, is this recommended at all? Which thread is best to follow for upgrading him to WM6?
His current details are:
ROM Version: 2.16.9.1 WWE
ROM Date: 2/6/06
Radio Version: 02.07.10
ProtocolVersion 413.1.03
ExtROM: 2.16.9.101
Any help will be appreciated.
P.S. I did just try to the radio rom that is on the xda ftp, for the wizard, I downloaded and tried to load the REAL_Radio_2.61.11 ROM, but that does not want to load for some or other reason, it first complained about the radio update util and said I must update or something, the second time I tried it was a communication error. I am using my JASJAR's USB cable, is this a problem at all?
Try to change the radio rom to 2.19 or higher but i recommend you to flash first the 2.19 if that fails then try more higher.. i guess 2.2x and 2.6x something like that... i forgot..
Ok, u got a link for me for those ROMS?
wait a sec..
If you search and read all the stickies thread you might encounter this one your self..
http://forum.xda-developers.com/showthread.php?t=268031
There at that thread have a varius radio roms to download..
goodluck!..
post the result afterward
Thanks...I didnt see that one...I will have a look...shot for the help...
Ok, ive tried a few different things.
I tried to get it to connect with activesync, but it just doesnt want to work, I have also attempted a hard reset, and activesync doesnt work either.
Before I did a hard reset activesync 'did something', and a message came up saying it couldnt get an IP address from the server, and on the PC activesync came up with some other thing saying it cannot connect to the Windows Mobile Powered Device.
After the hard reset, I try activesync again, and now absolutally nothing happens on the phone. On the PC the little network icon comes up aqquiring an IP address and dissappears, and the just sits there...
At this point I ran a exe file on the K-JAM, to put it into bootloader mode, I ran the update tool, and again it complained about the update utility, again not changing anything, I ran it, and then it gave a communication / connection error, and a third time also a communication / connection error.
I tried only one radio rom, I am going to try it with the oldest version on that page, if that doesn't work, then I don't know. I tried it with ActiveSync 4.5 and 4.2.
In the mean time I tried the original ROM file from clubimate, that actually loaded, and worked, except the network still isnt working.
I also tried syncing the phone on another pc, and funny enough that worked.
On trying to load the new Radio ROM, it started the update process, and at that moment the phone jumps to bootloader mode, obviously the activesync connection gets lost, the update tool waits a bit, and then suddenly complains about the update tool, saying I need a new version or something.
I have checked the bootloader version of the phone, and it is version 2.x.
I try it again and then I get a connection error....I really need to get my dads phone working again.
Any ideas?
Not sure which Radio's you are trying but go grab a Radio Only ROM. TMobile 2.19.11 UK seems to be a very good and stable one. These are found in the ftp area: ftp://xda:[email protected]/Wizard .
Hope that helps.
Thanks for the help.....ive tried 3 different ones from there, they all do the same thing...so its a bit wierd.....
On the other side of the coin I decided to stick on another sim card, and it works just fine on the other sim card
So the radio is working just fine afterall.....just got back from the service provider and they rekon either the sim card is damaged or its a network error....so lets see what happens.....
Thanks to everybody for the help...
lol..
so its just the simcard after all..
lol yeah....
Although I would still like to know why I can't update the radio anyway...
isnt it because of your activesync?
I don't know what it is...
I used it on another PC alltogether and activesync worked just fine...the update tool interacts with the device, starts the update process, and then the phone goes to bootloader mode, activesync obviously losing the connection, the update tool waits a while and then suddenly says something about the update utility being old or something, I need a new one or what ever....
Then while in bootloader mode I try the update again and then I get a connection error.
Its all wierd.....
hi
im trying to put spl on my phone kaiser hard spl v1.0 in fact and im having trouble after the dos type screen does its stuff it says the activesync should be grey and the phone should be in bootload mode. then it loads another program to flash it to the device. and this programs needs to have active sync running but the phone is still in bootloader and actice sync is grey what am i doing to myself
bump help me pleaseim stuck and i cant find a slotuion in the relevant spl thread
SOLUTION!
MOD EDIT: SOLUTION:
ok basically i used jockyw2001s spl instead of oilpofs. and remembered to uncheck the allow usb connection in the activsync settings. which olipofs doesnt tell you to do.
ive checked bootloader and this confirms i have spl 1.0
I have flashed this rom to my phone and I would definitly keep it but the the internet doesnt work on it...noooowww when I go to connect my phone via USB, I get no connection to my computer to flash another rom...but atleast Ill have a phone thats on cause it still charges lmao...Any ideas on why my phone isnt being recognized?
ginolin doesn't have the network settings in this ROM. It was an oversight that he corrected with his updated one. Anyway here is the cab you need to install. Run the network wizard and select your country and provider.
when I go to connect my phone via USB, I get no connection to my computer to flash another rom...but atleast Ill have a phone thats on cause it still charges
Click to expand...
Click to collapse
Do you have active sync running in your phone? Maybe this rom does not include this service?
Hello guys, let's make it short... suddenly the display of my Diamond become black and there's nothing I can do to make it on again... I tried everything: reset, remove battery... nothing! :-(
The telephone works, in fact I can receive calls and so... and it even connects through activesync. So it's a display problem for sure! :-((
Now my BIG question: I have to put it back H3G ITA original ROM (first step), that I've found on an italian forum and the original SPL that I've found here (second step), to bring the Diamond to repair.
For the ROM no probs I suppose... I'll go thru Activesync and flash it as usual, but THEN??? I won't be able to use activesync again to flash the spl, since I won't be able to set the initial configuration! :-(
Can you help me? Some ideas??? Thanks in advance!
mmm... what if someone tells me the right steps after a flash upgrade and i try to touch the screen at my best for the initial configuration???
then i could connect to activesync again maybe....
pleaaaaaaaaaaaaaaaseeeee...... give me some ideas!!! :-(((
What a shame...
i was hoping someone has an nice answer
i have exactly the same problem since yesterday - so dont worry you are not alone
you dont need to use activesync to flash
enter bootloader mode and you can connect via USB
Mobile Vista Seadragon by ansar
R 1.65.16.25
G 25.83.40.02H
D 3.34.0....
I have recently unlocked my tilt and I have ran into some weird issues
1. Cannot connect to Active Sync
2. Cannot install cab files (always unsuccessful)
3. Cannot delete rename or edit ANY files unless throught microsoft office.
4. Cannot hard reset or reach bootloader via hard keys. Hard reset makes the send screen come up but the phone key nor any other key works
All these probles came after I installed FingerKeyb-2.1-QVGA
Anyone know of a solution to revert back or reflash to any other rom. I am all out of guesses as to what has happened.
Thanks in advance
Cashflow said:
Mobile Vista Seadragon by ansar
R 1.65.16.25
G 25.83.40.02H
D 3.34.0....
I have recently unlocked my tilt and I have ran into some weird issues
1. Cannot connect to Active Sync
2. Cannot install cab files (always unsuccessful)
3. Cannot delete rename or edit ANY files unless throught microsoft office.
4. Cannot hard reset or reach bootloader via hard keys. Hard reset makes the send screen come up but the phone key nor any other key works
All these probles came after I installed FingerKeyb-2.1-QVGA
Anyone know of a solution to revert back or reflash to any other rom. I am all out of guesses as to what has happened.
Thanks in advance
Click to expand...
Click to collapse
Flash back to your stock and then a custom. Avoid then to install the program fingerkeyb
How will I flash back when Active sync will not connect?
EDIT: I connect the phone and it asks to active sync or internet share. I select active sync and then the phone loads active sync on the pc and then an error occurs. Sometimes saying "error" on the windows mobile device center and sometimes saying in so many words that the usb connection was not successful on my phone screen
Cashflow said:
How will I flash back when Active sync will not connect?
EDIT: I connect the phone and it asks to active sync or internet share. I select active sync and then the phone loads active sync on the pc and then an error occurs. Sometimes saying "error" on the windows mobile device center and sometimes saying in so many words that the usb connection was not successful on my phone screen
Click to expand...
Click to collapse
Flash via sdcard
OK... I will give that a go again when I study over the tutorial a little bit more. I have not been able to get to bootloader via the hard keys. It just boots back to the OS as if the keys are not pressed. I have made sure the power and camera buttons fuction while the OS is running but for some reason they act as if the are not mapped during the Hardreset procedure. Seems like I am stuck. The Bootloader.cab will not work because no .cab will install.
EDIT: As I figured... NOTHING.... Any more ideas... Thanks for the help so far.
Is there a way to "unpack" a .cab and maybe initiate it manually? That will provide an answer to my bootloader.cab and that will get me on track
Problem Solved: I installed the bootloader app from the Kaiser rom on the official site by using winrar and transfered the app to a microsd using another phone and then transfered the card to the Tilt and initiated bootloader. I should be safe to flash from here.