Won't boot after official Update - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hello,
I have a Wizard From T-Mobile Netherlands. And Yesterday i found out there was an rom update for my wizzard. >>URL<<
So i did the update. Everything was going right. but after a reboot the wizzard won't boot anymore. i'ts stock at the Windows Mobile Splash screen. .
I have tried to put the rom on the wizzard agian but no succes. I can access the 3 colored screen what say's IPL 2.21 SPL 2.21.
If i Want to boot normaly i see the folowing data:
IPL 2.21
SPL 2.21
GSM 02.19.11
OS 2.24.2.5
What can i do to make this Wizard working again??
Sorry for my english.
Please Help...

i'ts working again....

wow, we r really helpfull! we fixed it without answering!! lol

Related

Problem with downgrading Radio 3.08 to 2.61

This is what started it all...
flashed from WM6 TI2 to "XDA Mobile 6.0.0"
my phone is fully unlocked and tried to downgrade my radio from 3.08 to 2.61. It was still showing 3.08 after downgrade..
next, i flashed to "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE" thinking that i would do it from the start. it downgraded my radio to 1.01
after downgrade:
1- load good, i can notice some lag on the start button
2- tried to upgrade to radio 2.26 - after reboot, still say 1.01
3- when rebooting once, it loop on the IPL/SPL splach screen.
I tried several time to reflash again and again, i cannot get to upgrade the radio.
P.S. i now see a extended_rom2 in the storage card... first time i saw this one. Even after flashing the "button's 1.05 ROM" i still see the HTC logo before the IPL/SPL screen show...
Any help is greatly apreciated... how can i get a clead rom (clear ROM) and install the OS.
try doing the tmo 2.26 full rom install. and make sure you take out the sd card before starting.
Are you sure you have Radio 3.08?
I am pretty sure there isn't a Radio version 3.08. There are IPL & SPL version 3.08, these are not Radio ROMs though these are the boot loader (Initial Program Loader, Secondary Program Loader).
In Settings, System & Device Information it should say 'Radio Version: xx.xx.xx'. Check there.
I could be wrong however..........
Andy
ADB100 said:
I am pretty sure there isn't a Radio version 3.08. There are IPL & SPL version 3.08, these are not Radio ROMs though these are the boot loader (Initial Program Loader, Secondary Program Loader).
In Settings, System & Device Information it should say 'Radio Version: xx.xx.xx'. Check there.
I could be wrong however..........
Andy
Click to expand...
Click to collapse
yes, you are right, it's IPL/SPL .... (ok... newb slap)
frappy666 said:
yes, you are right, it's IPL/SPL .... (ok... newb slap)
Click to expand...
Click to collapse
You should be OK with them. I have been flashing my Wizard very frequently and have stayed with IPL/SPL 3.08 for over a month so far without any issues. Be aware though that if you flash a custom ROM that contains the IPL/SPL portion it will replace the 3.08 you have now with whatever is included. I now always either cook my own ROM or if I try a pre-cooked one I remove the IPL/SPL, bootscreens, Radio & Extended ROM before flashing my Wizard.
HTH
Andy
OK, i would like to get rid of the "HTC" logo on boot... seems that it's causing some problem.
boot: 1- a "HTC" logo (probably been installed with the "XDA Mobile 6.0.0" ROM)
2- the logo with a beer mug aprar with the IPL/SPL info.
3- the screen go white after a while and reboot.
3- goto 1
ADB100 said:
You should be OK with them. I have been flashing my Wizard very frequently and have stayed with IPL/SPL 3.08 for over a month so far without any issues. Be aware though that if you flash a custom ROM that contains the IPL/SPL portion it will replace the 3.08 you have now with whatever is included. I now always either cook my own ROM or if I try a pre-cooked one I remove the IPL/SPL, bootscreens, Radio & Extended ROM before flashing my Wizard.
HTH
Andy
Click to expand...
Click to collapse
I wish... but i'm stuck with IPL/SPL 1.01 ... i'm unable to change it.
ok, i "solve" the problem. reinstalled the original ROM on my 8125 and upgraded to WM6. Work well so far...

strucked with boot loader screen in imate kjam

i bricked my imate kjam while upgrading to wm6.now strucked with bootloader screen.nothing can be done .please help.it shows ipl 2.16 and spl 2.16 on bootloader screen.it hapened when i tried upgrade to wm6 using sp5 upgrade tools.
Firstly, this is not brick. A brick is one that you can even power on the Wizard.
Flash with your K-Jam original ROM to get back your OS, then following the stickies in this forum to unlock your Wizard, then flash one of the WM6 ROMs here using bundled RUU application.
p.s I don't know what "sp5 update tools" is.
how to flash back my original rom in kjam.
Thanks for response.can u tell me where can i find step by step procedure for Flashing my K-Jam to original ROM to get back my OS, my ipl 2.16 and spl 2.16 . I dont want to do anything wrong from now.please tell.thanks.
sajipavithram said:
Thanks for response.can u tell me where can i find step by step procedure for Flashing my K-Jam to original ROM to get back my OS, my ipl 2.16 and spl 2.16 . I dont want to do anything wrong from now.please tell.thanks.
Click to expand...
Click to collapse
Download official k-jam Rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from official website of i-mate k-jam or from the following link below:-
ftp://ftp.clubimate.com
1.unzip the Rom zipfile,get your phone into bootloaders screen (multicolored screen)by pressing and holding down the camera button and the Power ON button together,the phone will start in bootloaders(multicolored screen) it'll show you ipl/spl 2.16
2.when in bootloaders,connect your phone with pc via usb cable, a small usb written will appear at the bottom of the multicolored screen of your phone.confirm it.
3.open the unzipped folder of the downloaded Rom,run the RUU icon in it(double click Ruu.exe)
4. follow the instructions and flash the Rom,after completion,your phone will restart and start working.
Good luck !
zabardast_1 said:
Download official k-jam Rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from official website of i-mate k-jam or from the following link below:-
ftp://ftp.clubimate.com
1.unzip the Rom zipfile,get your phone into bootloaders screen (multicolored screen)by pressing and holding down the camera button and the Power ON button together,the phone will start in bootloaders(multicolored screen) it'll show you ipl/spl 2.16
2.when in bootloaders,connect your phone with pc via usb cable, a small usb written will appear at the bottom of the multicolored screen of your phone.confirm it.
3.open the unzipped folder of the downloaded Rom,run the RUU icon in it(double click Ruu.exe)
4. follow the instructions and flash the Rom,after completion,your phone will restart and start working.
Good luck !
Click to expand...
Click to collapse
hi
I did the exact thing , I've got no errors during that but i still have a blue screen with these
IPL 2.16 , SPL 2.16 , GSM 02.07.10 , OS 2.16.9.1
what did i wrong?
thanks
hello, I am very new to this forum and also new to a windows phone. i will appreciate your patience and kindness to help me. I tried flashing an imate kjam using SOFTSPL. I am now stuck at the muilticolored screen displaying IPL 2.16.0001, SPL 1.06
I dont even know what to do now. i downloaded 'K-JAM_WWE_216901_2169101_020710_ship.zip' from rapidshare and when i tried loading its saying invalid vendor id. unfortunately we can access the clubimate website here in south africa.
Please help me gurus and evryone who has the mercy for me.
Thank you so much..
IPL 2.16.0001 = G4 and SPL 1.06 = G3 this means your phone is bricked.
To my knowledge nobody has recovered from this.
only ahmar sohail can do that
So ahmar sohail plz help my imate stuck and i love my fone
djkata1 said:
So ahmar sohail plz help my imate stuck and i love my fone
Click to expand...
Click to collapse
why do not you use WST to solve problems on your device..???

Wizard Freeze On Bootloader. Help Plz.!

Hi mates. i was using TNT WM 6.1 Rom. and now i tried to upgrade my device to TNT 6.1 v2. but my wizard stucked at bootloader after successful upgrae.
i have ipl 3.08 and spl 3.08. then i installed the Button rom. and with that my IPL goes to 1.01 and spl 3.08 but the button rom also stucked at bootloader after successful upgrade. this was happening first time.
so kindly help me with this situation. or if there is any other rescue rom. then plz send me link.
now my wizard always stuck at bootloader screen.
Regards
You can't go from 3.xx to 1.xx bootloaders
try to restore 3.xx
i have restored the IPL to 3.08 and SPL to 3.08 but still it freezes on the bootloader window where it displays the ipl spl gsm and os info.
what i will do now. to rescue my device. actually i want to enable rapi services. but wizard service tool is not working in bootloader mode. and the device is freezed at the info screen. so any other possibility to enable rapi. so i will reflash with shell tool.?
If the CID is already unlocked then follow drugstore's thread with the mtty solution
bro the CID is not already unlocked. i flashed many times with wizard love rom / button rom / & Xdaminiis rom. but all i got is only ipl changed to 1.01 but the spl remains 3.08 so i need to downgrade the spl as well. please help..
Thanks.
im in the same situation. ipl 1.XX.... and spl 3.08 ... its a wizard G4 ... and stuck on green info screen or bootloader. help !

please help!!!! ROM upgraded and now my wiza dosnt work!!!! :'(

hay guyzz... m feeling so helpless for my i-mate k-jam...
i uploaded the button rom ...
http://rs48.rapidshare.com/files/16304986/T-Mobile_2.19.11_Radio_Only.zip
this one...
and now my i-mate k-jam doesnt work... its stuck in the bootloader screen where the i-mate logo is showed!!!
i tried to upload new rom but its still stuck in tht screen.
my versions:::
ipl: 1.01
spl: 1.01
gsm: 1.12.10.0
os (after the new rom): 1.5.4.2
please assist me somehow... i m missing my wiza!!!!!
what should i do!!!! :'(

K-jam stuck on boot screen :(

hey guys and gals, my one friend gave me his k-jam to fix after he tried to flash it. I did follow the [READ FIRST] The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards ( http://forum.xda-developers.com/showthread.php?t=285435 ) guide. I installed both the button and minis_Launchrom, both installed 100%, however it does not go past the boot screen.
IPL 1.05
SPL 2.26
GSM 01.12.10
OS 1.5.4.2
Any advice will surely help me a lot and thank you in advance.
saa044 said:
hey guys and gals, my one friend gave me his k-jam to fix after he tried to flash it. I did follow the [READ FIRST] The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards ( http://forum.xda-developers.com/showthread.php?t=285435 ) guide. I installed both the button and minis_Launchrom, both installed 100%, however it does not go past the boot screen.
IPL 1.05
SPL 2.26
GSM 01.12.10
OS 1.5.4.2
Any advice will surely help me a lot and thank you in advance.
Click to expand...
Click to collapse
Hi: something similar happens in one wizard I got: trying to upgrade, the screen remains in the start:
ipl 1.01
spl 1.01
gsm 1.12.10
OS 1.5.4.2
(the rom with the beer photo at the start)
after some minute restart and the same screen.
If you try the hardreset, it is quite impossible to press the "send" button, and if you succeed nothing happen. It appear the "HTC Innovation" screen and so on.
If you put it into bootloader and connect the usb cable, the usb signal appear on the screen, but trying to install another rom the program says there is no device connected.
Any help also for me?

Categories

Resources