Database Develop

i mate

i unlock my phone and upgraded to qteck w d latest rom since then i m not able to return back to imate i unlocking the phone but it stock on 1% only modifid cingular work i m getting 326 message plz any help

i'm sorry, but...huh???

darkjedi said:
i'm sorry, but...huh???
Click to expand...
Click to collapse
Jedi, enough tequila consumed, you have not. To understand, drink you must.

Try installing the LATEST i-mate, not an older i-mate ROM. With the new ROMs you can't revert to an older ROM just by using the normal installer.

i mate with cingular modifide
i try everythink no luck the two only rom i could load is the modifide rom cigular or t mobile with the latest upgrade 2.17.hard reset unlock every thing no luck when i start to update it stock it give 2.17 ipl and 2.17spl and start 1%and stop to give 326 error.

i mate with cingular modifide
i try everythink no luck the two only rom i could load is the modifide rom cigular or t mobile with the latest upgrade 2.17.hard reset unlock every thing no luck when i start to update it stock it give 2.17 ipl and 2.17spl and start 1%and stop to give 326 error.

either you're really drunk, or are horrible at english. anyways, is the phone CID unlocked or not?

yes it is i don t beleeve what i m seeing after testing all the rom was out from old rom to the latest one .

i'm really sorry, but i have absolutely no idea what the hell you are talking about. if this is english, it's quite bad. so i'm going to opt-out on this one, and maybe someone else here can decypher exactly what the hell you are talking about.

i was able to load 1050412 qteck rom but not the new one and it s always ipl 217 what s is the ipl 217

Downgrade from Mr Clean rom

Can someone help me to downgrade from this rom.
I would like to put back my original one.
I already tried and I didn't managed. I have a Qtek 9100 so normaly it is unlocked.
When I tried to downgrade a got a message 296 saying that the rom is not usuable for my device.
Can someone give me the correct procedure to downgrade..

Downgrade to Button's 1.05 available Here !
Then you can "upgrade" it back to the shipped version.
Good luck!

thanks a lot.
It's worked

WOW! Quick like the bunny!

Same problem
Hi,
I have the same wish (re-install the original rom).
Like you indicate, I've downgrade... but now I can't upgrade to the original rom (i try with this one and this one)...)
Have you any idea ?
Thank a lot.
Loïc.

Resolved
Thank to Chris...
He help me in PM and I've resolved my problem...
Loïc.

link not working
Dr Puttingham said:
Downgrade to Button's 1.05 available Here !
Then you can "upgrade" it back to the shipped version.
Good luck!
Click to expand...
Click to collapse
Het the link is not working!!!!

Try this ... ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe

trying to upgrade to the new t-mobile (2.26.10.2) rom
can anyone help me, i currently have mr clean installed but i cannot update to the new t-mobile rom?
what do i need to do?

Still looking for button 1.05
That link doesnt work either. I have looked all over this site for this button 1.05 and I always get this Error 550 Failed to change directory message...
Its 6 in the morning for me now in paris. I give up for now. But I have crashed my spv 3000 trying to downgrade it with a link somebody gave at some point on this site. I think I can just put back the 2.17 IPL and SPl Roms I have. But its a real bother. Anyone can help, so I can do this CID unlock., and then and only then pgrade my rom...

Paul Bourbon said:
That link doesnt work either. I have looked all over this site for this button 1.05 and I always get this Error 550 Failed to change directory message...
Its 6 in the morning for me now in paris. I give up for now. But I have crashed my spv 3000 trying to downgrade it with a link somebody gave at some point on this site. I think I can just put back the 2.17 IPL and SPl Roms I have. But its a real bother. Anyone can help, so I can do this CID unlock., and then and only then pgrade my rom...
Click to expand...
Click to collapse
That file you were given is good. ROM files are no longer posted here per M$'s request.
Typically when the install "hangs" it due to a problem with the PC, spyware would be my first guess. Also it's amazing what deleting your Windows temp files and running a CHKDSK /F can do. Try with another PC.
btw, there's a couple of good tutorials that deal with unlocking G3 devices ..
Good luck.

im looking for : CUSTOM__RUU_Wizard_1050412_WWE_

hi all
i tried to download the file ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe from the unlockung topic then it failed
seems to be removed
somebody have please upload it on any server except rapidshare
like : http://www.quicksharing.com/
or http://www.up4world.com/
my device now unusefull , so please help me
thanx in advanced

http://download.yousendit.com/FF900F2908E9D05B

Thanks for the info.

Hi there everyone
Greetings from Paris
I encountered the same problem. The file was not there anylonger. Then I saw this post, and its reply. I downloaded the file on http://download.yousendit.com/FF900F2908E9D05B which worked fine.
I ran the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe file.
So far so good, and then the process crashed at 98%. Something about a file in outlook. I started the whole process again, and now it just stalls at 98%. No error message. NOthing. Anybody have any idea what I should do now...
I have an Orange SPV 3000. I can put the new rom back but I wanted to do a cid unlock, before doing so. It seems to be necessary to be able to try out different roms...
Thanks.

Paul Bourbon said:
I have an Orange SPV 3000. I can put the new rom back but I wanted to do a cid unlock, before doing so. It seems to be necessary to be able to try out different roms...
Thanks.
Click to expand...
Click to collapse
I never have to downgrade before I do the CID unlocked. I've tried with two MDA and never encountered any problem. You will only need to downgrade if you CANNOT CID unlocked; otherwise, don't bother to downgrade.

thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?

Paul Bourbon said:
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Click to expand...
Click to collapse
When downgrading with this ROM...it will stall at 98% for a few minutes...be patient. To confirm that the ROM I posted was legit...I used it again myself and worked fine. Then to make sure it wasn't just me...I had 2 other people tell me they used it and worked fine for them as well.
Don't know what to tell you as this is the ROM that was hosted on the FTP site for a long time.

shell tool
If your having trouble flashing a rom the shell tool posted on the g4 threads lets you flash any rom you wish onto your phone i have a g4 cid locked and using the tool i can swap my roms every day if i wished to with no hassle
http://rapidshare.com/files/17787647/ShellTool_bugfixed.zip

Paul Bourbon said:
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Click to expand...
Click to collapse
Get yourself a signature. Is your Wizard G3 or G4.

I think that my wizard is a G3. I just added my signature.
Still looking for the mysterious file that apparently is no longer posted on this site.
thanks for any info.

i need a rapdishare or megauploads link to where i can download a 1.xx ROM for my G3 Qtek 9100 (Tmobile with imate 2.21 ROM).
I want to upgrade to wm6 and need to have a backup plan if it fails
10x in advance.

j3d1n4s7y said:
http://download.yousendit.com/FF900F2908E9D05B
Click to expand...
Click to collapse
thanx for uploading , but sorry this server blocked on our country
if any one can upload it again on the servers which i linked on the first post
thanx in advanced

looking for BUtton 1.05
this rom is not working for me. I stalls at about 98% of the process, and dies...
If you decide to do it, make sure you have a back up option.

Do a search on PirateBay for it. Its seeded...

i found the file
thanx for all
my device unlocked

Just in case: How do you flash back to WM5?

Hello all,
First of all I am new to the forum and a beginner with regards to pda phones and upgrading software etc.. I am switching from the blackjack phone to a treo 750 which I recieved today. I have read alot of good things about WM6 ( the unofficial version), which I downloaded and saved on my computer. I plan on giving it a try, I believe the instructions are pretty straightforward on how to flash to WM6, now the question is if something goes wrong or for some strange reason I don't like WM6 and would like to wait for the official version, how do I flash back to WM5. Take it easy on me, I'm a newbie.
Thanks in advance.

I saw the answer posted somewhere in the main WM6 thread. You follow the same directions, but you need the WM5 rom. I'm pretty sure I saw someone post the download link for the WM5 rom.
http://forum.xda-developers.com/showthread.php?t=319898
(it's near 30 pages of reading now)

boomersooner said:
Hello all,
First of all I am new to the forum and a beginner with regards to pda phones and upgrading software etc.. I am switching from the blackjack phone to a treo 750 which I recieved today. I have read alot of good things about WM6 ( the unofficial version), which I downloaded and saved on my computer. I plan on giving it a try, I believe the instructions are pretty straightforward on how to flash to WM6, now the question is if something goes wrong or for some strange reason I don't like WM6 and would like to wait for the official version, how do I flash back to WM5. Take it easy on me, I'm a newbie.
Thanks in advance.
Click to expand...
Click to collapse
I forget who the OP was... so my apologies for not giving credit for these:
http://rapidshare.com/files/16438750/Treo750_Cingular_ROM.zip
OR
http://rapidshare.com/files/17874512/Treo750_Cingular_ROM.zip
Those are the WM5 roms from Cingular. You don't need both, but I posted both just in case one link stops working.

netsyd said:
I forget who the OP was... so my apologies for not giving credit for these:
http://rapidshare.com/files/16438750/Treo750_Cingular_ROM.zip
OR
http://rapidshare.com/files/17874512/Treo750_Cingular_ROM.zip
Those are the WM5 roms from Cingular. You don't need both, but I posted both just in case one link stops working.
Click to expand...
Click to collapse
Thanks a bunch, your help is appreciated!

does anyone know where to find the latest at&t Treo Rom for the rebranded at&t Treo 750 TREO750-1.13ATT
The ones listed are for the cingular branded 750.. not that there is much difference except at&t startup and shutdown logos and the alpha tag displays correctly..

Vodaphone UK WM5 ROM
As I am sellling this and it has the AT&T ROM on it, where can I get the Vodaphone or a generic WM5 ROM if asked to flash it back please? And it is just a case of doing what I did to put WM6 on here?
Thanks.

dougproctor said:
As I am sellling this and it has the AT&T ROM on it, where can I get the Vodaphone or a generic WM5 ROM if asked to flash it back please? And it is just a case of doing what I did to put WM6 on here?
Thanks.
Click to expand...
Click to collapse
Maybe you're looking for this?
http://forum.xda-developers.com/showthread.php?t=320233

Thanks for that. Knew I had seen it before but couldn't remember where!

Where can I find the ATT rom? I just got my phone last month and I MIGHT have to reflash back to WM5.

Ware cen i get WM5 Rom Unlcocked and Unbranded ?

I am having a little trouble flashing back to WM5. I have downloaded the Cingular Rom and did what the instructions told me to do.
I loaded the CHeeDIAG (Misspelled?) file to SD Card and then press and hold the Button below the volume buttons then press the Reset Button, but this is where the problem starts. It should ask me to press the Power button to start, but nothing happens. All that happens is it shows a screen saying "Loading". I have waited for at least 30 minutes and nothing else happens. What I am doing wrong? Thanks for any advice.

Is there an AT&T version of the rom floating about? I have a 750 on trial and would love to try wm6 but would need to get it back to factory if I decide to return it.

lhtf8 said:
I am having a little trouble flashing back to WM5. I have downloaded the Cingular Rom and did what the instructions told me to do.
I loaded the CHeeDIAG (Misspelled?) file to SD Card and then press and hold the Button below the volume buttons then press the Reset Button, but this is where the problem starts. It should ask me to press the Power button to start, but nothing happens. All that happens is it shows a screen saying "Loading". I have waited for at least 30 minutes and nothing else happens. What I am doing wrong? Thanks for any advice.
Click to expand...
Click to collapse
Edit: Nevermind

I am having the same problem trying to flash back to WM5, I need to send my phone back to AT&T for a warranty exchange but I can't manage to get the WM5 firmware back on it

vladimir2989 said:
Ware cen i get WM5 Rom Unlcocked and Unbranded ?
Click to expand...
Click to collapse
Anyone knows where I can get this? Spotted a dead pixel on my Treo and I need to flash it back to make an exchange. Tried the Vodafone ROM but had trouble unlocking the extended rom (had the infamous "inserkey failed" error).

lhtf8 said:
I am having a little trouble flashing back to WM5. I have downloaded the Cingular Rom and did what the instructions told me to do.
I loaded the CHeeDIAG (Misspelled?) file to SD Card and then press and hold the Button below the volume buttons then press the Reset Button, but this is where the problem starts. It should ask me to press the Power button to start, but nothing happens. All that happens is it shows a screen saying "Loading". I have waited for at least 30 minutes and nothing else happens. What I am doing wrong? Thanks for any advice.
Click to expand...
Click to collapse
I have a friend that wants his Cingualr Branded Treo 750 flashed back to WM5 as he is doing a warranty swap. I have downloaded the files listed on this thread, and am getting the same results ashrobo got, when I put the freshly formated (FAT32) memory card in with the CheeDIAG.nbh file in and reset into upgrade mode, I get the following;
0058002
Loading...
It never doeas anything else. If I try to flash it with the ROM image, It gets as far as the OS section then fails. Any ideas?

bellington74 said:
I have a friend that wants his Cingualr Branded Treo 750 flashed back to WM5 as he is doing a warranty swap. I have downloaded the files listed on this thread, and am getting the same results ashrobo got, when I put the freshly formated (FAT32) memory card in with the CheeDIAG.nbh file in and reset into upgrade mode, I get the following;
0058002
Loading...
It never doeas anything else. If I try to flash it with the ROM image, It gets as far as the OS section then fails. Any ideas?
Click to expand...
Click to collapse
Disregard
I found the thread that said you don't need to run the diags first. He is now flashed back to WM5.

vladimir2989 said:
Ware cen i get WM5 Rom Unlcocked and Unbranded ?
Click to expand...
Click to collapse
Same as, where can I get this ROM?

Hi, I'm also new at this forum, I'm from Puerto Rico. I just need to download the WM5 for my TREO 750, it is from AT&T. Does the Cingular one works???? Please let me know....

Problem Flashing My Imate K-jam to WM6

I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.

paraozzy said:
I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
Click to expand...
Click to collapse
You know what the totally histerical thing about this is? This is the exact same reason I made my first post. LOL.
Alright I'm gonna try to help you seeing as how it doesn't look like too many others are looking here.
I have several questions first before I can help you.
1. Who is your wireless service provider? IE: T-Mobile, Cingular, Etc...
2. What Is your IPL/SPL?
Answer these 2 questions for me and I will be able to better help you.

Thanks for the quick reponse
Now the irony is i am here in nepal and i use the phone as a simple mobile phone, but as far as i know i remember flashing a T-Mobile ROM while upgrading to WM6, the IPL and SPL both are 2.26, i unlocked the device while upgrading..
Thanks
Kushal

paraozzy said:
I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
Click to expand...
Click to collapse
Hey!
ok lets c if I may be of some help here,if u r in bootloader screen than try to reflash again T-mobile 2.26 rom and if it goes alright than go on to flash any other wm6 cooked roms.
or
if it doesnt flash than i wud suggest u reflash back the buttons 105 rom to get back to ipl/spl 1.05,than again use lokiwiz tool to unlock cid & reflash T-Mobile to gain ipl.spl 2.26
hope it works out.it happened once with me also, I did the same & now I'am running wm6 XM6r3 Rom,Secondly u can use the WST TOOL by Mestrini to verify ur device status, u can even Cid unlock ur device with it, Goodluck

Yup man flashing the T-mobile 2.26 did the job..
Great thanks for the same..

paraozzy said:
Yup man flashing the T-mobile 2.26 did the job..
Great thanks for the same..
Click to expand...
Click to collapse
glade you got it up and running good luck and happy flashing