Related
Hello folks,
Today I flashed with the ROM in thread 'T-Mobile USA 2.17 ROM (Custom)'. After it came up, I ran through the screen align and wizard. When it was all done installing extended rom etc it restarted on its own. After booting back up, everthing was really slow and there was no cell signal. The battery icon had an ! mark on it and when clicked, it says unknown battery. At this point everything keeps freezing and genrally not working including no activesync connection possible. I restarted into the bootloader and tried to flash again. It completed, but now I just get the tmobile boot screen, and eventually it restarts again, never completing the boot. This is when I notice that it doesnt seem to have a radio rom (GSM) version listed, but rather a gap where it should be. I ended up pulling the battery out and trying to get back into the boot loader again, and now I cant get it to power on in any way.
I guess that is enough said. The only other thing to note is that everything was working fine prior to the attempted update, I was merely hoping to get a performance boost, as I was using the original rom.
Any thoughts?
Thanks!
B. Ramsey
Fixed!
No other ROM would install, but in reading back through threads, I found a link to RUU_Prodigy_1081002_108_10910_TMO_US.exe. After installing this, I had my GSM rom back. Then everything worked. I think the not powering on issue had to do with the fact that it sat in the bootloader screen for several hours at one point. Since there was no standby, the battery was wasted. I am attempting to reflash it now to 2.17, we'll see.
No dice
After installing the 2.17 ROM, no more GSM, and same problems. I reflashed back to the previous and it works again..
Re: Fixed!
pterodyne said:
No other ROM would install, but in reading back through threads, I found a link to RUU_Prodigy_1081002_108_10910_TMO_US.exe. After installing this, I had my GSM rom back. Then everything worked. I think the not powering on issue had to do with the fact that it sat in the bootloader screen for several hours at one point. Since there was no standby, the battery was wasted. I am attempting to reflash it now to 2.17, we'll see.
Click to expand...
Click to collapse
THANK YOU SO MUCH for posting this! I also had a brick because of the same setup - trying to use the custom TMOBILE ROM. I had the same symptoms you did - basically non-responsive and no radio stack and no USB connection. I was not getting anywhere with any other ROM. Now, at least I have a working device.
Still no AKU2 though
Let me know if you manage to get an AKU2 ROM on your device!
That's worrisome. Do you know if the CID unlock was successful? (I think it's scripted into that custom upgrader)
If you're feeling adventurous, you could try intalling the custom 2.17 Cingular upgrader I made (it's on the FTP server). If that's successful, then the problem is with the T-MO upgrader. Based on all the folks having success with that T-MO upgrader though, I imagine the only issue might be a corrupt download. If the Cingular upgrader results in the same behavior, then the problem is either with the CID lock or some odd hardware problem.
I'm truly perplexed by the issue you're having..sure wish I knew how to help ya.
Thanks for the replies. My phone was already unlocked as it was purchased that way. I actually did get custom 2.17 tmo Rom to work, I just hadnt posted here yet. After flashing to the older rom, I flashed to the 2.16 Rom on clubimate.com. Then I had a working 2.16 with GSM. I figured what the hey and went ahead and tried the custom 2.17 Rom again. All is great, and FAST. I wish I could remember what custom Rom I was using before I think it must be the culprit. I cant remember, but it did have the extended rom free and open, total commander, and an unlocker.
Thanks
pterodyne said:
Thanks for the replies. My phone was already unlocked as it was purchased that way. I actually did get custom 2.17 tmo Rom to work, I just hadnt posted here yet. After flashing to the older rom, I flashed to the 2.16 Rom on clubimate.com. Then I had a working 2.16 with GSM. I figured what the hey and went ahead and tried the custom 2.17 Rom again. All is great, and FAST. I wish I could remember what custom Rom I was using before I think it must be the culprit. I cant remember, but it did have the extended rom free and open, total commander, and an unlocker.
Thanks
Click to expand...
Click to collapse
My device is a QTEK 9100. I was upgrading from the ROM on my device when I got it:
ROM 1.1.7.5 9/22/2005
Radio: 01.01.10
Protocol: 4.0.13.16
ExtROM: 1.1.7.105
My carrier is TMobile, so I figured the TMobile custom rom that was built off of the latest QTEK would be a good bet for me - but instead I ended up with no Radio.
I have the IMATE ROM you refer to - maybe I'll try to go to that as an interim step to get to the QTEK ROM I really want, since you had success with that method.
What I don't understand is why the Vanilla QTEK 2.17 (which is what I tried after the TMO Custom 2.17) gave me problems. I don't recall the exact error message, but basically it said it couldn't use that ROM on my device.
pterodyne said:
Thanks for the replies. My phone was already unlocked as it was purchased that way. I actually did get custom 2.17 tmo Rom to work, I just hadnt posted here yet. After flashing to the older rom, I flashed to the 2.16 Rom on clubimate.com. Then I had a working 2.16 with GSM. I figured what the hey and went ahead and tried the custom 2.17 Rom again. All is great, and FAST. I wish I could remember what custom Rom I was using before I think it must be the culprit. I cant remember, but it did have the extended rom free and open, total commander, and an unlocker.
Thanks
Click to expand...
Click to collapse
When you say it was already unlocked, don't you mean SIM unlocked? It would be unusual to buy a phone that is already CID unlocked.
I bought the unbranded k-jam from Simoncells.com. All I did was put my tmobile sim card in it and it worked. I guess I dont know the difference between SIM and CID unlocking.
Well theb that's where you went wrong, sim unlock refers to ur phone being able to use any world sim card...cid unlock refers to country Identification...if ur fone is not cid unlocked then wen u install foreign roms it will bugg up ur fone...dats wat happened to u and that other fellow pterodyne...I sim and cid unlocked my fone. ran the tmo 2.17 custom rom without a problem....plz do ur research on upgrading roms b4 u bash them...most factory fones don't come cid unlocked so I'd b surprised if urs did (tho it prolly came sim unlocked)...
Hello guys!
I got my MDA Vario last week, and I am very much impressed with it!
I got the MDA Vario brand new without a contract and my intention is to use it with one of those O2 Genie PAYG SIM cards. So.... after much reading this excellent forum I figured out that I would need to unlock the SIMlock on the Vario. Got hold of the Lokiwiz utility, followed the advice on these forums, and tested it with the Orange SIM in my regular phone, and hey presto.... MY PY PHONE IS UNLOCKED!
Next step - to remove all T-Mobile customisations. Again, I had a simple bit of advice from one of you good folk - hard reset, then soft reset when the phone starts to install customisations and now all the pink girlie stuff has gone! Only reminant of T-Mobile left on the phone is the logo on the phone dial keypad.
My thoughts are now with upgrading the ROM. T-Mobile have been very slow with updating their ROM package -a new one is apparently due very soon. Now.... in preparation of installing a new ROM, Ive CID unlocked my phone. I would really like to know which ROM I should upgrade to - there are so many out there! As the phone has been CID & Sim Unlocked, does the phone remained unlocked irrespective of what ROM I install? Can I install a T-Mobile ROM after changing it to another?
As I intend to mostly use an O2 PAYG SIM in it, would it be better to use a new 02 update? If so, which one? Or do I go for another ROM? All very confusing! Finally, Ive heard that I cannot browse the net via GPRS on an 02 PAYG SIM. Is that true? Do I need to flash an ExtROM too?
I know Im asking a lot here and am being a bit of a pain in the backside, but I would really appreciate any and as much advice as possible as I realy dont want to end up with a dead phone! Many thanks in advance!
Hi, yes you could wait for the new rom and i am a believer in sticking with your manufacturer roms because many of the posts here seem to people experimenting with different roms and it all going wrong - lol.
But if you do upgrade proberly the commonest choice is the aku2 qtek rom that i use
download here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
and the o2 aku2rom not a bad idea too, but without the o2 extras.
Yes you could then upgrade to the t-mobile rom then but often you need to unlock again with lockiwiz 0.3a.
PAYG o2 will browse internet but msn etc.. does not work.
btw yes you are a pain in the arse but then most people here are!! :lol:
Cheers Mark! Nice to have some basic advice - very reassuring for a thicko newbie like me!
Well... I couldnt wait for the new T-Mobile ROM and went ahead with the upgrade with the Qtek upgrade you suggested.
Was a little tricky at first because the upgrade wouldnt happen (port failing to open) but I had a few programs running in the background on my desktop PC and shut them all down so that I had a `Clean` PC. The upgrade process was then as smooth as a babys bottom.
MDA Vario is running really well - well worth the upgrade IMO. Everything seems quicker and generally better. Only problem I have is with wifi - it seems to take ages to make a connection with my PC (ad-hoc peer to peer) whereas on the original T-Mob ROM it was very quick. Any ideas here?
I read that you say I would need Lokiwiz 0.3a to install the AKU2 T-Mob ROM when it is eventually released. I was under the impression that once the PDA was unlocked (lokiwiz 0.2b) I wouldnt need to unlock it again. Is it different with the very latest T-Mob ROM? Can I not revert (downgrade) to the original T-Mob and then upgrade to the new T-Mob ROM? Ive not heard of lokiwiz 0.3a being out yet - would it be as simple as unlocking with lokiwiz 0.2b?
Finally, how on earth do I get the latest 02 ROM? I need to enter my 02 mobile number and IMEI to download it. Do I need lokiwiz 0.3a to install that or any other current ROM?
Cheers for your friendly advice.
Al.
Hi, no problem - glad to help.
Lokiwiz 0.3a is out see here http://forum.xda-developers.com/viewtopic.php?t=50768
For some reason when upgrading (in think it renews cid/spl) to aku2 rom seems to lock again - i had to unlock my qtek with above tool.
Yes you can go back to original rom - but if does not work use farias method of unlocking and downgrading rom (post is in this forum)
Most of the roms are in the wiki http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
including the o2 roms, but i would refrain from too much chopping and changing because you can destory the bootloader and then has to go back to the manufacturer.
Many reported problems with the wifi setting up - i would read some of the threads in the wizard forum if i was you. First thing to try is tweak wifi on device to wlan g and it may work better.
see registry tweaks here http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
btw good to hang out in the wizard forum too - you will learn alot of tips from there.
Want to also say thanks from another newebie with T-Mobile MDA. Have unlocked phone and CID and flashed with 2.17 QTEK ROM and all is good.
Thanks !!!
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Jesus sbouri that logo was killing me, brilliant tip, nice one mate!!!
hi
i just got my mda vario and manage to unlocked the phone with lokiwiz03. i know my phone is now sim unlocked, but how do i check if it is cid unlock as well?
i am eager to flash the rom with the qtek version but i have no idea how to do it.
i know i must have my phone cid unlock in order to install a different rom, so do i just download the latest qtek rom, connect my device to usb and activesync it, and then just run the RUU?
i am really noob here.
cheers.
Hi mate if i was you i would use MR CLEANS ROM i flashed with that and its excellent, tottaly clean with no tmobile crap and i didnt do anything with the cid so dont worry.
ftp://xda:[email protected]/Uploads/Wizard/ROMS/MrClean_RUU_WIZARD_224_AKU23_WWE.zip
Just download this and run follow instructions, real easy. Good luck mate.
thanks for the advice...i took a bold move and flash it with a qtek rom. works like a charm. before that i did cid unlock using lokiwiz02a, not lokiwiz03.
i will take a look at mr.clean rom at a later stage.
i notice that my imei number is different from the one in my box. does flashing the rom change it?
now my next task would be update to a better radio rom and check out the extension rom.
cheers.
SBouri said:
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Click to expand...
Click to collapse
Great tip, worked like a charm and left no marks.
Thanks.
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Scottland said:
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Click to expand...
Click to collapse
The mr clean rom is a more advanced rom and has no extras. The qtek official rom is probably a safer install because its an official rom and many good reports of success and users pleased with the outcome.
Yes when you have flashed just input all those settings again.
Plus you can backup your voice tag database between hard resets by copying the file CommandModel1.bin found under the windows folder to your pc or to the memory card. After rom upgrade copy it back to your windows folder and all your voice tags are back!
Create backup of windows\start menu - most programs that are on the storage card dont need a reinstall.
Create copy of pim.vol in the root directory of the device - contains contact and appt information. After flash change the new pim.vol to pim.vo and copy and paste old pim.vol (use total commander or gsfinder file explorers for this) and soft reset and you will have info back.
Create backup of windows\favorites - for all your internet favorites.
That will make restore a bit quicker than otherwise.
Cheers for the info. I was actually thinking of trying the Mr. Clean one first, is there anything missing from this one, or is it just less stable?
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
meschle said:
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
Click to expand...
Click to collapse
True, I didn't think about that. Thanks again.
Ive been using Mr clean rom for 1 week now and its excellent from my experience. Its tottaly clean and runs so fast!
By clean i mean it has no customizations as you will find on official roms. It flashed just like any other rom too. Easy as pie. Just my info as people would like to know.
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Scottland said:
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Click to expand...
Click to collapse
I cant find what you say under settings - what does it do?
Never mind ignore me, that'll teach me not to read T-Mobile's site correctly
I just upgraded to the cing aku2.3.
I originally had the imate kjam 2.16.9.
Now my device is showing...
rom version:2.16.9.1 wwe
rom date:2/6/06
radio version:02.25.11
protocol version:4.1.13.12
ext rom version:2.25.11.102
Now it appears to me that I really haven't upgraded my rom, while everything else has changed.
What in the world did i do wrong? I simply did the sim unlock and cid unlock and the used the aku 2.3 installer program, and chose the number one selection which included the bootloader.
What am I missing?
Has anyone seen this issue before?
What can I do to resolve the issue?
I apologize for the newbie questions....
i encountered the exact same thing, i just switched back to the moslki 2.26 rom, no big deal to me
@ironbear - I'm afraid you never actually upgraded your phone. If those little numbers don't change then it's no go....
I keep meaning to make this part of my signature ...
http://forum.xda-developers.com/viewtopic.php?t=47848
Good luck!
and that is why i went back to my favorite Molski 2.26 rom
Well...
I thought I had unlocked my CID several times before. I got the same message and result as I did when I used Faria's tutorial this last time. And low and behold it WORKED!
I successfully upgraded everything now thanks to that tutorial. I guess starting from scratch in essence did the trick!
Thanks everyone for your help!
i had done the unlock along time ago.. but still my device never upgraded to 2.3... oh well, the molski rom kicks a$$
Hey guys...I believe my G4 device is bricked yet still recoverable.
I was flashing the htc 8125 update today to my wizard from the vanilla WM6 ROM. (Yes I want to go back to originial WM5).
I'm still quite new to this whole flashing scene, but that's besides the point.
I tried using the EXE of this ROM:
RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
and after that didn't work I believed that maybe I should try using shelltool, which I used for the Vanilla WM6 ROM.
It went for about 35 minutes...then I decided to pull the cable. Shelltool said it completed the flash..so I hard reset the device. It didn't get past the cingular splash screen.
Only until later did I start believing that this was a G3 only ROM.
I'm still unsure whether it was g3 or g4, but my device is a G4.
I believe i can still get into bootloader(the 3 color screen I believe it is), but can't connect to the USB to flash any other ROM, or so I believe.
When I plug in the USB the device shows that it is connected, yet the computer doesn't do anything.
I have no idea, i've been searching google, searching XDA with google, maybe just not using the right words.
the device
SPL/SPL is 2.25.0001
GSM 02.25.11
OS(Believe it is displaying the OS it was supposed to be AFTER flash): 2.25.11.1
Can anyone direct me down the right path?
EDIT:WOOPS....WRONG FORUM..
Totally didn't see the specific G4 forum
figured it out myself on accident.
Thanks for everyone's help!
hey im running an 8125 G3 with WM6 Professional+Touchflo and HTC. My current radio version is 02.25.11. I am having problems receiving calls and what not. Is this the most current software? I tried to download and install Radio:1.54.07.00 but when it keeps on shutting down ActiveSync 4.5 when it goes to flash the rom. What can i do?
Schnellburg said:
hey im running an 8125 G3 with WM6 Professional+Touchflo and HTC. My current radio version is 02.25.11. I am having problems receiving calls and what not. Is this the most current software? I tried to download and install Radio:1.54.07.00 but when it keeps on shutting down ActiveSync 4.5 when it goes to flash the rom. What can i do?
Click to expand...
Click to collapse
You posted in the wrong forum, and looks like youve downloaded a Radio destined for a hermes and not a Wizard (which is your device)..
Ive moved this thread into the wizard forums which should be the place you look for help on the 8125. Good luck.