Mail button - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hi Guys
Trying to upgrade my PDA2k to wm5 but have a problem when installing new rom.
the instructions are ..
When you are done, press the "Mail" button
A white screen will show for a while - just wait.
It is presently clearing your device in preparation for the new ROM to start executing
My Mail button has decided its gone to god is there any other way around this ?
Thanks

Nope. There is nothing you can do.

u nid to ask it back from God.

Related

Cannot Hard Reset please help

Hi all,
i have Flashed my XDAIIs from WM2003SE to the new himalaya rom version,
everything works fine ,but the only problem is i cannot hard reset , it
i have a problem with my buttons (Home,email, explorer, ok), they cannot be used since i purchased it, so in this case i cannot hard reset my device, as i have to press mail button to confirm the hard reset setting,
Please any one have any alternate solution of hard reset or to format the persistent memory let me know
Try a program like spb pocket plus. It can put a button on your today screen to do a hard-reset & soft-reset as well, in the system section .
It's available on trial, so go for it.
Cheers, M
hi again , i downloaded the sbp plus and installed the program,i can find the button for soft reset , but here is no button available for hard reset , could u please guide me
The hard-reset button must be added manually, no idea why ;-)
So go to: start -> settings -> today -> items
select 'sbp plus' and push the 'options...' buttons. Now you can add it to the today bar.
Succes, M
hi thanks for your co -operation , i tried to follow the procedure as you told , once after selecting the today--items--Pocket Plus--options , here comes a new screen titled "today Plug-in" i click on Add button, and a new "untitled" button is created on left hand side, than i click on items on the same screen ,i get list of category "indicator, programs, my documents,system,settings,custom" i tried to find the reset utlity all over the categories but i cannot ,
your comments are appreciated ,i have installed spb plus version 3.04 buid 4195
I have to install it first so give me a few hours for exact details
Hi Kevin,
I'm terribly sorry that I wasted your time; I must have been mistaken fot I can't find it back myself. I looked spb pocket plus, battery pack pro & some other tools but can't find it back for you.
Probably you need the e-mail button as well to put it into bootloader? Or is BA lacking such a mode? cause my magician is havin a hard-reset when coming out of bootloader.
Hope it helps.
Sorry, M
oh please. If you're in WM5, you can't hard reset just like this.
Put it into the mode which you can format storage....
do a search in the future.

Wizard flashed and now dead?

I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Do you have a copy of the Wizard Love rom? If so, install that in bootloader mode. Remember to plug your USB cable into the phone.
drivex said:
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Click to expand...
Click to collapse
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
drivex said:
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
Click to expand...
Click to collapse
I would suggest flashing back to a carrier aku2.x rom and ensure that your phone will come up properly on it. If it does then good, it's most likely not a serious hardware issue, if not then you might be out of luck.
looks like a brick to me..
So sorry m8.
I hope you can revive it !
Had similar problem with the Super rom.What worked for me was taking a back up on the memory card and reflashing from the card.Read the Wiki about details on how to go about it.
Try to flash the latest t-mobile ROM found on their site if all the suggested doesnt work..
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
I've done. I used method with mtty and i copied os to sd card, after that i reflashed using minisd card and it works. Thx for everyting, u guyz do great job here hehe
Me too !
cyberdrakula said:
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
Click to expand...
Click to collapse
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
cachep2004 said:
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
Click to expand...
Click to collapse
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Pls show me another ways !
UfOuN said:
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Click to expand...
Click to collapse
I'm living vietnam, so i'm trying to find out another ways, but i think they have no equipments.
Bless god for me.............pls
Revive Wizard
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Thanks alot !
sleurhut said:
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Click to expand...
Click to collapse
Thanks alot my friend, I will do it !
"FORMAT FAIL" again again pls ... help me !
( I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...)
Pls ! Help me...."FORMAT FAIL" again again pls ... help me !
The hard reset doesnt work
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
ecomajor said:
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
Click to expand...
Click to collapse
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
mfrazzz said:
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
Click to expand...
Click to collapse
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
ecomajor said:
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
Click to expand...
Click to collapse
Not that I know of. Thats one of the reasons its recommended you start with a battery that has over 50% charge (personally I never flash with less than 100% in case something goes wrong). Not saying you didn't do that, but you appear to now be trying to work with a dead (or almost dead) battery, and that will only make things worse if you try to flash and then the battery dies in the middle (maybe not worse, but it sure won't help).
Like I said, you'll need to find someone with a similar phone or see if your local cell provider office will let you charge it (or swap it for a charged battery).
I got my ppc back up and I tried reflashing again and I have almost the same issue. It says format is successfull but then it gets stuck at the blue screen.

imate pda2k

hi all
i upgrade my pocket pc imate pda2k se2003 to windows mobile 6 professional with (HELMI_BA_WM6_R0_Public Pass newdevicesuck) its working fine but after one day my pocket pc got error (wrong password) i enter correct password many times but it say worng password i soft rest my ppc after soft reset my ppc can't start. reset my ppc many time but problem is still i connect my ppc with desktop pc to syncronise (microsoft active sync) but dont detect my ppc . plz help me what can i do?
plzz
AddAn
There is a bug in WM6...when the main battery is drained or removed you cannot use your password. In this case there is no other option...you have to make Hard Reset!
thx for ur reply.i reset the PPC On/Off button + Reset button.but problem is still it requests passward.How to make Hard Reset and further help.plz reply
If this is true I'm sure you do not perform Hard Reset correctly. If this is new ROM you should go to Boot Loader first.
Tip:How to:
1.Perform Soft Reset
2.Push Record and Camera button at the same time and hold them until the Boot Loader screen shows up.
P.S. You should do step 2. before the Radio version/ROM version appear in the right bottom of the screen.
3.“Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES
P.S. Use the Record and Camera buttons for navigation.
4.Press Mail button.(Do not touch anything until the white screen disappears)
NOTE: IF YOU WANT TO GET RID OT THE PASSWORD(WITHOUT DELETING YOUR FILES) YOU SHOULD PERFORM NO/YES/NO PROCEDURE!
That's it! Good Luck!
thx.soft reset done.thx alot for ur suggestion.PPC working properly.if there is any other Bugs n other issues that r ristricted in this version plz send me detail.if u dnt mind.once again thx
my camera and recorder button works before booting and after that it does not move the option in the boot menu...............will some one please help me
i had got imate pda2k could u please tell the place form were i get steps to inatall wm6
welcome to the forum!
short question - short answer:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
step by step instructions, don't skip anything, if there is something you don't understand, come back to this post and ask for it.

My HTC Touch HD (Blackstone) was dead :(

Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
did u try to hard reset it?
can u still enter bootloader mode?
if u can still enter bootloader then try flash another ROM
I think there is a timebomb in the Rom you are using.
Go to bootloader menu, connect to usb, and try to flash an other rom by installing via Windows.
okay, but what is the hard reset? Is that a red button on my device back?
if it is, i try this, but it isnt solve my problem.
and how i can go the bootloader menu?
thank a lot.
Don't worry...just try the hardreset:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel.
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If this does not work...just flash another rom...it really seems to have this timebomb issue...you don't have a hardware problem...it's just the software.
here's a video instruction for the hard reset:
http://www.youtube.com/watch?gl=DE&hl=de&v=Eqg8XFJyHBY
thanks a lot, the hard reset worked!!!
thanks!!!
i will flash a new 6.5 ROM.
VorosAdam said:
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
Click to expand...
Click to collapse
I'm curious wich rom you use?
you CHICKEN >"<
quack quack
vodanh2025 said:
you CHICKEN >"<
Click to expand...
Click to collapse
lol chicken?
Sorry, but its dont solve my problem, all 6.5 ROMs go to freeze a few sec/minutes when i use... And the phone function and network connection also dont work. Big trouble (
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
VorosAdam said:
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
Click to expand...
Click to collapse
Flash the latest Hard SPL http://forum.xda-developers.com/attachment.php?attachmentid=179550&d=1240516932
I'm curious, what way did you flash these roms. Are you using USPL or HSPL or have you just flashed these straight from stock?
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
VorosAdam said:
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
Click to expand...
Click to collapse
2 versions of HSPL, 1.14 & 1.56. You will need HSPL 1.56 on your device to be able to use roms based on 1.56+
thanks a lot, i flash the new HSPL, and now, all phone function back to normal!!!
THANKS!!
Impressed by the support
Hello,
I was watching this thread continously and whenever i try to jump in to help you with tips about flashing, someone would have done it already.
I feel somewhat releived to know that your Kit(d) is back on track.
I like this forum very much not just for the solutions but also for the people's attitude.

Diamond warranty, Flash Problem!

Hi Guys,
I have a great Problem with my XDA Diamond! Since one month my touchsreen didnt response! At the moment runs olinex 1.40 at the pda. I have flashed the newest o2 rom and that work without a problem! But i cant start my device because the first adjust doesent work.... (touchscreen dosent work). I tryed Hard-SPL Unlocker post 39 that i can send my device back to the O2...
but at the process on the screen of my pc i have 0% for a time than came Error 202: connection....
activesync is ok!
I have tryed to update the olinex but the same problem ...
also with other roms...
I hope anyone of you have a idea because i wanna have my pda back ....
sorry for my bad english!
Thanks a lot!!!
L3xX
If Your touchscreen doesnt response, i think it would be a external problem. Did you drop it?Water spill...Maybe try flashing a new rom like Energy Rom 6.5 with maila 2.5(sense 2.5 UI) I just got my CDMA Diamond this Saturday. Great phone with the Windows Phone 6.5 Rom. Sorry but i tried to help but couldn't. If u have a warranty try to e-mail or contact HTC, maybe they might send you back A HTC HD2! Oh the link for Energy Rom is at PPC GEEKS - http://forum.ppcgeeks.com/showthread.php?t=74084
I had the same problem
There are two different ways I fixed mine
1) Press and hold the power button + volume down + enter button (menu) while holding press the rest with the stylist. continuing to hold the buttons until a white screen comes up allowing you to hard rest the device.
2) If 1) doesn't work try try unlocking your phone again then putting a new rom on it. (this will work as long as your phone will connect to the computer, with two beeps)
well I hope this helps
Hi great thank to you! but this steps i´ve allready done!.
Bevor i can give my device into de warranty i musst flash the normal bootloader!!! in my eyes this Hard-SPL Unlocker
But this dosent work!

Categories

Resources