Good time of the day!
I have Orange SPV M2000 France. I received it without radio ROM. OK. I tryed update radio rom to new one from shipped packed (downloaded form this FTP). Device writes Radio ROM Update Error.
OK. I readed all posts about fixing this problem. Now I have not working Bluetooth (License Expired BDA 00:00:00:00:00:00) and no Radio ROM.
Also, sometime, it writes in Model ID filed not PH20B but random chars.
Bootloader version 2.07.
Have any idea how to repair this device?
May be flash it from SD card (but how create it and where I can found images for write to SD card?).
Thank you very mutch.
P.S. All other stuff works fine (I mean that this device works fine as PDA, but no Phone and, now, no Bluetooth).
Help, please.
try to upgrade radio rom using maupgradeut_noid.exe
xplode said:
try to upgrade radio rom using maupgradeut_noid.exe
Click to expand...
Click to collapse
Yes. I tryed. As I said I tryed all solutions from forum. No result. It freez on 0% when I use _NoID.
Any idea?
mtty
have you tryed this?
one of the commands cleans your storage, so do a backup first
Thank you. But yes. I tryed it too.
No result.
I think I need full flash for this device.
Sorry, guys. But have you any ideas how to repair my device?
May be somebody can dowload full-flesh from devices and upload it on FTP?
Have you gone through this page and if so what errors did you get and when.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
Yes. I did.
If I use Type II it reports Radio Update Error at 0%.
If I use Type I it freeze on 0% without reporting error.
If I use original (not NoID) then it reports CountryID error even [CHECKCEID_TYPE]=1 in .ini file.
Well I know for a fact that one user had a real painful radion install.
In the long run ir was a USB issue on his dektop.
I would try a different pc and follow wiki, dont mix your files TYPE I needs the type one update files and the fix.bat.
Type II the no_id
If you mix them it wont work.
Coutnry ID error is solved with Type II and No_id
OK. Thank you. I will try on second PC today.
OK. I tryed last solution. Same result. Radio update error.
I am really sorry. But anybody have solution?
Related
Hi All
I have a SPV M2000.One day the phone stopped working. Everything was all right, it did ask for pin but then didn't even looked for network,was immediately saying NO SERVICE. I tried few sim cards - the same.
So then I wanted to reinstall the ROM, I downloaded the official from Orange UK , tried to install it,and it shows ERROR 114, Radio Rom Upgrade Error.
And the phone now is in bootloader mode and I can't do anything!
I downloaded different ROM from xda-developers ,at the beggining with a country error, but i managed to fix it and now with this ROM it's the same thing. ERROR 114. I tried everything, hard,soft reset, Pc reset etc. Nothing works!PPC still in bootloader mode!
Please tell me if you know what else can I try!
Guys,come on,really noone knows???
Have you read WIKI? Follow the first method to flash your ROM. Have you remembered to plug in your power supply to your cradle when you flash your device?
Heres another thread on NO SERVICE Plz help... No Service after radio upgrade. Happened to me. Read it and see the advise by MDAIIIUser and TheLastOne. If all else fails, bring it to the shop.
I had a very similar problem....
First I tried to update a whole package that means rom, extended rom and radio
The radio update is always the first one and there always upgrade error 114 occured.
So I updated every part seperately and it works except the radio. So I tried alot but it just didn't work..even downgrading was impossible. MDAIIIuser and happy goat tried to help me as well as they could but nothing had an effect.
So I read in another forum that asus mainboards have some problemes with these radio updates....I thought they were joking...but I tried the radio pdate at another pc and it worked!
I know it sounds a bit stupid but I was desperate and at last it worked!
You can read it here :
http://forum.xda-developers.com/viewtopic.php?p=89657#89657
TRied that method.Doesn't work
Any other ideas?
One more thing.Is it normal that in bootloader mode when I plug the power cable in the charging LED is not working?it was working before.
The battery is charged ,but shouldn't it show that the power is connected anyway?
EDIT: this is a reply to the first answer.
So you think I should try on another PC?I will today!Hopefully it will work.
So I managed to install new rom on a different computer! I think that there was a problem with active sync.I used the one that was installed from my old XDAII.Could that be the reason?Now i installed the one provided with a M2000.
But it doesn't work anyway
Still NO SERVICE message.
ANy other ideas different than taking it to Orange?
Hi rottie,
No Service could mean anything. Could your SIM card be faulty? Device SIM locked? Or hardware faulty? You cannot just use any ROMs you find at ftp. Try to flash your device with full shipped rom at http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade. Use the first method and upgrade using MaUpgradeUt_noID.exe to bypass the Country code error. Remember that you'd need to run MaUpgradeUt_noID.exe twice.
Read wiki carefully, it has alot of precious information. Cheers ^^
Before you update any version you should be sure that your radio is
compatible with your device. Usually all radio upgrades should be
independent off the language of the device but as I understood (could be
wrong) there are differences because of the servicenetwork frequency.
So you must be sure that the chosen radio is compatible and that your
device is not simlocked.
So perhabs you should chose an upgrade of your provider.
But perhabs itis better not to risk your guarantee of your provider by
using updates or components of other providers! Because there could be
the possibility that your device is damaged and you should bring it back!
Good luck!
Guys, you get me wrong.I'm not trying anything what I'll find.
1)One of the ROMs that I tried and the one that I left now is a ROM downloaded from orange.co.uk for SPV M2000. So there can't be any incompatibility, don't you think?
2)I have 2 sim cards,both from Orange,I was using both of them before in my M2000 which is sold only through Orange so there can't be any simlock problem,don't you think?
3)I used only that orange ROM, original and the I-Mate one.None of them were working good,always NO SERVICE.
I bought the phone second hand,with box,all accessories etc. But I don't have a receipt :? And of course have lost the guy's number.That's why I want to try everything before going to the service.
I think this phone is network blocked, probably been reported damaged or stolen, once the insurance or replacement is issued a block is put on the imei of the phone that was subject to claim.
While trying to update my MDA Vario with the new AKU 2 ROM of T-Mobile the RUU puts the MDA in bootloader. Then Windows notifies me of a new unknown USB device and the update utility gives me an communication error with error code [260] - upgrade failed. :shock:
1) How to solve this problem as this would make me or
2) Is it possible for someone to make a complete backup on a mini SD card of his HTC Wizard? From what I have read on Internet this can be written to a file. When posted on the XDA ftp I can write this file back to a mini SD card and restore a original ROM (for this I need a short tutorial).
option 2 assumes that the problem is related to the ROM. I super CID and SIM unlocked using the well known tools. Maybe this has gone wrong at some point :?: ?.
I'm having the same problem moving up to a custom 2.26. Did you ever find a solution.
Thanks,
Jeff
dont qoute me on this.. but i believe its an issue with the update utility... hopefully someone else can confirm or deny this..
but you can try this one:
i dont know how much either of you know so i will try some directions with this...
take my rar file, extract them to a folder, lets use c:\rom for an example
if you rom you have is in an *.exe format then use winrar to extract the rom to a folder then take the nk.nbf file and copy it to c:\rom and then run the update utility
if your rom is already in a rar or zip file then just extract the nk.nbf file to the c:\rom folder and then run the update utility
hope that helps
shogunmark said:
dont qoute me on this.. but i believe its an issue with the update utility... hopefully someone else can confirm or deny this..
but you can try this one:
Click to expand...
Click to collapse
I really appreciate your help, but before I risk bricking my phone, could you tell you tell me how this differs from the ROMUpdateUtility_Wizard_NoID.exe and RUU*.* that are part of the custom ROM update package I already have?
Thanks,
Jeff
datawrhsdoc said:
shogunmark said:
dont qoute me on this.. but i believe its an issue with the update utility... hopefully someone else can confirm or deny this..
but you can try this one:
Click to expand...
Click to collapse
I really appreciate your help, but before I risk bricking my phone, could you tell you tell me how this differs from the ROMUpdateUtility_Wizard_NoID.exe and RUU*.* that are part of the custom ROM update package I already have?
Thanks,
Jeff
Click to expand...
Click to collapse
the custom rom that you have, does it have the NoID update utility already?
ANSWER
I spent a few hours fiddling with this, and it turns out that my problem was that I have a miniSD installed. Make sure you pop your miniSD out of the slot before you begin the update, and it should work.
Re: ANSWER
doomcomplex said:
I spent a few hours fiddling with this, and it turns out that my problem was that I have a miniSD installed. Make sure you pop your miniSD out of the slot before you begin the update, and it should work.
Click to expand...
Click to collapse
WTF that is WEIRD
i have flashed many roms and never had an issue with the sd card being in... but will definitely file that in the back of my brain in case i ever run into the same issue
shogunmark said:
the custom rom that you have, does it have the NoID update utility already?
Click to expand...
Click to collapse
Yes, it does. Oh, I also tried this without the MiniSD in the device (a known but really strange problem). Still getting the error.
Error 260 Finally Gone!!!
Well, just for the heck of it, I tried xelencin's 2.26 ROM update from another PC...and it succeeded.
Clearly, it is a new issue related to my laptop but it is probably going to quite a bit of trouble to track down.
Thanks everyone,
Jeff
Re: Answer
doomcomplex said:
I spent a few hours fiddling with this, and it turns out that my problem was that I have a miniSD installed. Make sure you pop your miniSD out of the slot before you begin the update, and it should work.
Click to expand...
Click to collapse
WTF!!! I had the exact same problem. Popped out the Mini-SD Card and voila! The Bootloader started!
Thanks man!!
Ty man ... MS card out and it is working .... yea
i cant get this to work PDA PHONE ROM UPDATER, send a black screen to s200 and then gives error 260
So, what's it mean when you run GetDeviceData.Exe and all you get in your ../windows/devicedata.txt file is "PH20B" ?
Strange, huh? I've tried it a couple of times. Always the same... Nothing but "PH20B". I'm also having the "No GSM" in the boot screen problem, and can't upgrade (well, load AT ALL!) my radio stack. In my device info screen the OS and Extended info are right, but Protocal and Radio are both blank now. This has all happened after trying to do a ROM upgrade tonight.
1. What (exactly) device you own? What was DeviceData BEFORE first upgrade?
2. What ROM you had, and which one you tried to load?
3. How did you do that (what procedure)? Have you omitted any steps?
Lets say you really own PH20B (Blueangel) then if the radio is inactive the devicedata.txt will not output the info from it. Reflash radio only
Also this may happen if you have flashed PH20A (Harrier) and you flashed WM5, go back to WM2003 and all will work fine
jakubd said:
1. What (exactly) device you own? What was DeviceData BEFORE first upgrade?
2. What ROM you had, and which one you tried to load?
3. How did you do that (what procedure)? Have you omitted any steps?
Click to expand...
Click to collapse
Answers:
1: It is a HTC BlueAngel. It's one of those with just "PocketPC" on the front. No cell provider branding. I bought it off ebay last year. Don't know what the file showed before. Never had a problem, so I never looked.
2: Was running a I-Mate ROM since I bought it. But the radio was really old. The radio version was like .9xx . Don't remember exactly what. SHould have written it down. But it was less than 1.00, I know that for sure. I was upgrading to the Siemens 1.33 ROM with the 1.15 radio added on.
3: Used MaUpgradUt_NoID. Never been able to use BaUpgradeUt. It's always given a country ID error, but Ma..NoID has always worked before.
xplode said:
Lets say you really own PH20B (Blueangel) then if the radio is inactive the devicedata.txt will not output the info from it. Reflash radio only
Also this may happen if you have flashed PH20A (Harrier) and you flashed WM5, go back to WM2003 and all will work fine
Click to expand...
Click to collapse
Yes. It is a blue angel for sure. See my reply above.
It's always been WM2003, and all I get when I try to flash ANY radio rom version to it now is a country ID error.
flash with noid app
maupgradeut_noid.exe
Yep. Already tried that. In fact, that's the ONLY way I've been able to do any upgrades at all since I bought the phone. Never have found a ROM that would work with BAupgradeUt.exe. Strange thing is, I can load the OS and EXT ROM's no problem using Ma..NoID.exe... Just not the Radio ROM. Even using NoID when I try to load a Radio ROM, it dies with a country code error. I believe the error is N-N-50-50-50 if that means anything to anyone. Any more ideas? I've tried all the obvious things I could think of. I wonder if maybe I could use a null data field in editfix.bat? That is, instead of using real data values from devicedata.txt like you normally would, replace the "???" in the .bat file with " ". Anyone know if that's even possible? Or should I just try taking it up to WM5, then back to 2003?
Thanks for all the thought and effort so far folks.
Please not that this is my first guide on here and I'll make it as easy to understand as much as possible.
This has been tested on a Vodaphone branded HD Mini. Please reply to this post if this has worked on a different branded phone.
This is to help people to Unbrand their HD Mini's.
Have you managed to flash it to the latest ROM? If not you need to do the following:
•Download the SSPL_RUU.exe and put it into an empty folder (http://forum.xda-developers.com/showthread.php?t=694409)
•Add the RUU_signed.nbh that you want to flash to your device into the same folder (http://shipped-roms.com/shipped/Pho...adio_Signed_32.2803.05.06_0.63.05.36_Ship.exe) Assuming you want Western Europe ROM. You can use a different ROM if you want
•Connect your HD Mini to your PC. Making sure you use ActiveSync
•Run SSPL_RUU.exe and following the onscreen propmts.
Once done your phone will reboot. Next is to flash a Radio ROM.
•Move your ROM from the folder which contains the SSPL_RUU.exe
•Using the ROM that you just used Extract it to a location of your choice by using winRAR. Look for
Radio_32.2806.05.06_0.63.05.40 and rename it to PHOTIMG.nbh
•Place PHOTIMG.nbh into the same folder as SSPL_RUU.exe and flash once again
•Once done you will have a unbranded HD Mini as if you bought it like that. This worked on my Vodaphone
branded HD Mini and worked a charm.
I'd like to thank DarkForcesTeam for the SSPL_RUU.exe and the rest of the developers that have made
this possible. Without them we would be stuck with these branded phones.
Could the Admins place this as a sticky please. Many Thanks
The phone hard-resets after radio flash ? I want to flash only the radio.
Thanks for your guide, wardy. Great explanation.
But it doesn't work with my HD mini.
It stays at 0% for quite a long time. Afterwards, there's an error saying something about a wrong ID.
I'm afraid I'll have to wait for a HD mini hardspl
ci6i said:
The phone hard-resets after radio flash ? I want to flash only the radio.
Click to expand...
Click to collapse
As long as you are using the SSPL_RUU.exe to flash only the radio & renaming then you can flash it. Yes after the flash the phone does hard-reset.
Which part does it stay on? Please list the error exactly as it appears so that I can help you further.
If its ''Error 294, Invalid Vendor ID'' then download PHO03693.exe over to your device and install it then try to flash the radio again.
wardy_uk1 said:
Which part does it stay on? Please list the error exactly as it appears so that I can help you further.
If its ''Error 294, Invalid Vendor ID'' then download PHO03693.exe over to your device and install it then try to flash the radio again.
Click to expand...
Click to collapse
Thanks, I installed PHO03693.exe now. What happened afterwards:
-The error I get when I try to install any ROM via “DFT_SSPL_MINI” is “[202] Connection error”.
-If I enter boot mode via my endkey app and install via “DFT_SSPL_MINI” after that, it ends with “Error [262]: Update error”. When I click “view document”, it says: “dummy file”.
-If I try to install official HTC ROM “RUU_Photon_HTC_Europe_1.36.401.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship”, I get “Error [294] invalid vender ID”
Not sure about that error code. Have you tried doing a hard-reset first then trying to flash the ROM. If your using Windows Vista or Windows 7 then try running SSPL_RUU.exe as Administrator. Hope this helps
wardy_uk1 said:
Not sure about that error code. Have you tried doing a hard-reset first then trying to flash the ROM. If your using Windows Vista or Windows 7 then try running SSPL_RUU.exe as Administrator. Hope this helps
Click to expand...
Click to collapse
I tried both Windows 7 and XP as administrator.
When I'm doing hard-reset, I have to install PHO03693.exe afterwards again. So I did.
It has confused me now mate :$ You'll be better waiting for the HSPL instead. Hopefully it won't be too long now for it.
I have a cracked hd mini with vodafone branding..........i wanted to install the latest official rom......but i'm unable to do so........also i'm new to all this stuff can anybody please help me with this.........thanks
Hi, I just extracted the ROM "RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe" with WINRAR, but I don't seem to find the Radio file inside, I only see the "RUU_signed.nbh" file which I intend to update, am I looking at the right place?
Thanks
rfung said:
Hi, I just extracted the ROM "RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe" with WINRAR, but I don't seem to find the Radio file inside, I only see the "RUU_signed.nbh" file which I intend to update, am I looking at the right place?
Thanks
Click to expand...
Click to collapse
Likewise I see no Radio file....
[edit]
Found the file now, download the latest HTC update http://www.htc.com/uk/SupportDownload.aspx?p_id=314&cat=0&dl_id=1024 & you can extract the file from there.
Can anyone confirm if flashing the Radio rom is safe? - the DarkForcesTeam original link warns against it! > http://forum.xda-developers.com/showthread.php?t=694409
Im using an O2 UK HD MINI but have upgraded the ROM to the latest just the radio has remained at 0.63.05.18
I flashed with east europen ROM and now (and before flashing) I don't have GSM signal on phone, strange is that signal show up sometimes 1/5 and disapear again after few seconds but nothing else.
I have one phone with original Spanish language and have same problem with signal. dunno why that happen.
can anyone send me the steps in german? i dont really understand it xD
sorry but my english ist not perfect
Managed to carry out the Radio ROM update with an O2 branded phone.
However the Radio rom listed is still the old one (0.63.05.18)
The update process appeared to take but the radio ROM has remained the same. So take from that what you will?!
help
Please help me guys! I think i've done exactly like u said but when i want to flash the RADIO (PHOTIMG.nbh) after i've flashed the RUU i get this message: the update utility cannot be used for your PDA Phone. Please get newer Update Utility
I downloaded the Radio from HTC site, it was 2 files dont know why? 1 small for like 700kb and the other 12mb....
So my problem is - I put android on my htc tytn II and it worked (well kinda) but anyway I decided to switch back to Windows Mobile...
I installed 1.27.x.x radio , found a Windows Mobile 6 ROM and put (Like in the instructions ) Kaisimg.nbh(renamed from ruu_signed.nbh) and Kaisdiag.nbh to my SD card and then started flashing... It flashed smth,rebooted automatically and started booting android again...
Then I hold again camera button + power+ reset and since then when I put EVERY .nbh file on my sd card and try to flash it it STUCK on "Loading.." If I try to flash it with USB It stays at 0%.
The only exeption is if I try to flash from USB the rom that I tried to flash before from my sd card.. then it starts 0%..1% and reboot the phone...
P.S: Please help me...I think my device is not Broken but I dont know what should I do to fix it...
To flash back to WM from android put your kaiser into bootloader (multi colored screen) Then connect to usb. Download any WM build that is recent (I suggest Phoenix 3 for this, you can flash whatever you want later). After you download it open and run the included RUU that came with it and it will flash it on there.
hmm, I also had experienced the similar problem on my 1st time flashing back to WinMo.
When you are trying to flash via USB cable and the process stopped at 1% I guess there is also a message about "Invalid vender ID" right?
and if the text in your bootloader (tricolor screen) doesn't mention anything about hard such as "3.29.0000" (not "3.29.hard")
then
you've lost your hard SPL that's why you cant flash any .nbh to your phone.
I had managed to solve this problem by flashing stock WM rom for kaiser. The rom also has to be suitable for your phone, I mean if your kaiser is originally from France, then use French kaiser stock rom. Or if you are using AT&T Tilt use kaiser cingular stock rom.
you can find the list of shipped roms for kaiser here :
http://shipped-roms.com/shipped/Kaiser/
If you still have the "invalid vender ID" error message, try another stock ROM.
Thanks man you're my hero! I though I lost my phone.. anyway i bought new one - Nokia 2730 Classic but Ill sell the kaiser...
Thanks Anyway ... you're god!
Have the same problem...
Firstly, I'd like to point that the reason for the hard SPL getting overwritten by an original SPL is NOT HAVING UPDATED HARDSPL to a newer version that prevents accidental overwrite. This is instructed in the previous steps before actually installing Android. That was my mistake (I had HardSPL 1.0 OliPof), and now I can't flash no rom to my Kaiser (which thankfully works quite well in Android).
What happens (please correct me if I'm wrong) is that "KAISDIAG.NBH" is a modified, standalone hardSPL that will flash to the phone the SPL that comes with the "KAISIMG.NBH" you put in your SD card with "KAISDIAG.NBH"). In my case, I used the WinMo 6.1 spanish version 3.29.412.0, which, resulted in my phone being flashed with the original SPL 3.29.
Now, it seems many users have fixed this locating the correct stock rom and flashing it in their Kaisers. But to others, like myself, nothing seems to work. I believe that this is because we not only need a stock rom for our specific Kaiser model, but also it has to be compatible with the SPL that accidentally got installed in the phone. The problem is what if such rom doesn't even exists?
I'm really thankfull for all I learned by reading the forums (and from my mistakes ) and I know I'm in no position to make requests, but here goes what I think could help the users like myself to fix this, if posible:
1) Guide to identify what model of Kaiser we have (maybe it's already there, I just couldn't find it)
2) Complete list (or lists) of stock roms (There are some around, those are easy to find I think, but it doesn't hurt to share different sources)
3) Something like a JumpSPL for Android would be more than awesome...
Thanks in advance to everybody, sorry for my own stupidity . Any idea or help would be much appreciated,
Daniel
hmm, I'm not sure if it has to be compatible with the SPL.
In my case, I was flashing a very old WWE stock rom which has original SPL 1.56.
I also had been very desperate because any stock rom I found seems doesn't work and I even didn't know where originally my kaiser came from because I get it from my uncle. So I tried to flash any WWE stock rom I could found but nothing works. I read from Wikipedia that based on my phone model (Kais100), this model was only sold as AT&T tilt for US. But the problem is my phone is HTC branded, not AT&T tilt. Well, based on this information I also tried to flash some cingular stock rom but the result was just the same.
After contacting HTC Customer care, I know more info about my phone. They told me that based on my phone product ID, my kaiser was originally shipped for US, but unfortunately they can't provide me stock rom for my phone model. So I searched myself but this time I had better objective : to search HTC branded rom but for US.
finally, after days of search. I've found the rom that is suitable for my phone. Its called HTC WWE Brightpoint US which has original SPL 3.29 at the bottom of the list on the website I told you on my previous post.
few weeks ago I also accidentally overwrite my HardSPL again, but this time I did it with the stock ROM which has original SPL 3.29. But this problem also solved by flashing the stock ROM I've found before via USB cable.
So, I guess it has nothing to do with spl version.
Keep tying don't give up.
Update: Step 1 completed! YAY
Using the serial number and some obscure google searching, I came to the conclusion my KAIS130 is australian. Cheers, mate!
I verified this by being able to download stock roms from the australian HTC site with my Kaiser serial number. But at the moment of writing this, have downloaded two roms and no luck yet. 5 minutes remaining for the third one... Wish me luck...
Daniel.
Well... Now what?
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
cuartetoraro said:
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
Click to expand...
Click to collapse
sorry to hear that..
well, extract the .nbh from exe and flash it via sd card is the method that made me overwrite my hard SPL in the first place.
hmm, did your phone comes with operator brand, such as three or something?
-Rif- said:
sorry to hear that..
hmm, did your phone comes with operator brand, such as three or something?
Click to expand...
Click to collapse
No, it's HTC unbranded. Now, something strange here: the label behind the battery has the serial number: HT830GB06075 and the P/N (guess it's part number) :99HCY194-00, but to the left of the camera, another label with the part number: 36H00563-00M and below says DATE:061107(TB02)/US.
I don't know if that's normal, but it caught my atention because my phone seems to have been dissasembled (little label over screw is teared). Maybe my Kaiser isn't Australian after all...