Database Develop

P3600 - only serial connect in bootloader

I have a SFR s300+ locked to sfr on France...
So I need to change rom...
When windows mobile run - device can synhronize and activesync enable, but when I put device in bootloader by sspl or without them device only show as SERIAL connection not usb! I`ve tried to change cable, ports other OS on my laptops and other but I can`t connect to it in bootloader mode via usb...
where a problem hide ?
please, help.

1 connect the ppc to pc with usb cable
2 put it in bootloader mode while connected
worked for me this way.

bootloader problem
i've the same problem , i've tried everything without success. In order:
- change usb cable
-change usb port on my laptop
- change personal computer, reinstalling active sync
- change settings in "settings-connections-usb to pc"
- hard reset
Syncro works well, my phone works well but i'm not able to upgrade the LASAGNA ROM 'cause when i enter in bootloader mode, it stay only in SERIAL MODE. There's a workaround to install the rom from the SD card instead of the USB cable?

Is a cable' problem.
Change the usb.
I had te same problem, after works 100%.

I've tried with another USB cable but it didn't work. with the other cable i'm able to do everything like the original HTC cable i'm actually use. Do you think i should buy another usb cable? What are the specifications of the htc cable?

ilmetallo said:
I've tried with another USB cable but it didn't work. with the other cable i'm able to do everything like the original HTC cable i'm actually use. Do you think i should buy another usb cable? What are the specifications of the htc cable?
Click to expand...
Click to collapse
I tryed with another cable, don't work. I definitely exclude a cable problem. I think there's something wrong with the miniusb connection in the device. I would try to upgrade the ROM directly from sd card but the procedure in wiki don't work.

got it fixed
your overloading the usb port most likely old computer/laptop or power issues, i have the xv6700 so i can use the cradle for power from a wall socket then plug the other cable into the usb port. works like a charm

p3600 - only serial connect in bootloader
it has to be your pc drivers if your pc/laptop is vista there is a site with driver swap for xp drivers for vista pc/laptops. had the same issue and voila mines sorted.laso check comm manager on your device as well jus to make sure as i write jus completed rom upgrade to wm6.1 from spv m700

[Q] Kies on PC does not work via USB?

Hi,
I can't connect my Note to Kies using USB.
Tried installing the drivers again, Different ports. It works via Wifi but not USB?
Also tried switching from MTP to USB storage mode and back but it's not working?
Anyone got any idea's
Oh I've tried different cables as well
Thanks

Hi,
Try to manually update your USB drivers (in the Windows Hardware Divice Manager)
When you open it you'll either see a device with a question mark or find the Samsung under USB devices.
Hope this helps,
Ton

Try a reboot of pc after doing connection troubleshooting through Kies, als disconnect and reconnect phone to pc and pass lockscreen on phone
Which rom are you on?
Sent from my GT-N7000 using Tapatalk 2

[Q] Cant connet USB! HELP!

Hey!
Today I recieved my sgsa and tried to connect it to the computer via usb. I slide the status bar and click USB CONNETCED (MTP Connected) but... nothing happens in my gio the robot (android) appeared and I could connect my phone. I installed kies and downloaded drivers but it doesn't help. Anyone knows the solution? Please, help.

Did you turn on 'USB debugging'
before connecting your phone to PC ??
Vía xÐÆ Øffíçíal™

You can also goto options, network, more options, usb connect to pc, and plug the cable
Sent from my GT-I9070 using xda app-developers app

[q] cant connect my huawei to my pc

I cant connect my huawei ascent p7 to my pc. i installe hisuite and i connect the usb cable to my pc but nothing happens. I didnt get any choises on how to connect it. Also i didnt see at all any drive from the mobile to the pc. i have enable the usb debbuging but it only charge the mobile. any help?

1. Did you choice HiSuite mode in notification panel after connection?
2. Did you install HiSuite on device?
3. Try installing MoboRobo on PC.
Sent from my HUAWEI P7-L10

after a few restarts on pc and on my mobile i finally did it. dont know whats wrong but now its fixed

marsian720 said:
after a few restarts on pc and on my mobile i finally did it. dont know whats wrong but now its fixed
Click to expand...
Click to collapse
Up till now I still cannot connect my p7 to my pc. I also cannot find the usb debugging in my phone.

Is there a way to unlock bootloader without conecting the phone to a PC?(broken port)

I have malfunctioning USB port, is there a way to unlock the bootloader to install a custom ROM without connecting the phone to a PC? transferring files using WiFi and then flashing it? Thanks in advance.

It's not possible, at least for now.