Related
Greetings, this is a general question and some direction is needed here as I am a noob to all this.
I own the Wing and have read that it is an HTC Atlas........is this correct?
or is it an HTC Herald? which is it?
I would like to unlock the phone to use it on Cingular if poss. but dont know what forum to look under for info about the phone, ROMs, etc.
And I dont know where to look to get the instructions to unlock it.
Would someone please be so kind as to point me in the right direction for info on this phone etc, link to me instructions to unlock this specific device: and from there on out I wont wander aimlessly around the forums wondering what doggone phone thread to read. This will be my first ever unlock attempt when find the info and I dont want to have to take out "Mr. Happy" (my pet name for my claw hammer) and unlock it that way................. My thanks in advance for the help.
Cheers
The Wing is the sim-locked version of the Atlas, they have the same specs, but only the Sim and CID lock are different (and the looks) But you can use any Herald upgrade, (if you have your CID removed). (Herald is the first and original HTC p4350, but with WM5)
I see, thanks. But in regards to the CID and SIM unlock where would I read about this, ya know the specific instructions for this model phone so I dont ruin the damn thing. I dont know what programs to use and/or if said programs used for unlocking are specific to the Wing. Any ideas on how to remove the CID/SIM issue, cause I can see myself using this as a paperweight without step by step instructions. LOL.
Have a look here
http://pdadb.net/index.php?m=specs&id=756
and here
http://pdadb.net/index.php?m=pdamaster&posted=1&model=HTC Herald 100
And then compare the Atlas with Herald or Terra = you will see they are the same BUT with different codename.
lol
Great site thanks papa. I will def. scour this site out more.
But once again.........can this phone be CID/SIM unlocked?
and how?
Please...with sugar on top. LOL.
Cheers
stonecoldcrb said:
Great site thanks papa. I will def. scour this site out more.
But once again.........can this phone be CID/SIM unlocked?
and how?
Please...with sugar on top. LOL.
Cheers
Click to expand...
Click to collapse
Try imei-check.
But for now there is NO OTHER solution.
Sorry.
Thanks again, I will do so.
stonecoldcrb said:
Thanks again, I will do so.
Click to expand...
Click to collapse
But remember i brick my device WITH imeicheck done before. I couldn´t flash another ROM. But they said - it will work and they don´t know what went wrong for me.
But try
papamopps said:
But remember i brick my device WITH imeicheck done before. I couldn´t flash another ROM. But they said - it will work and they don´t know what went wrong for me.
But try
Click to expand...
Click to collapse
Did you ever recover your Wing (read: made usable again) after bricking it?
WarezAppz said:
Did you ever recover your Wing (read: made usable again) after bricking it?
Click to expand...
Click to collapse
Not yet. But i had to let it repaired by service because of loose batterycover, etc. so i hope it is also flashed again.
lokwiz
doesn't lokwiz do the whole CID/SIM unlock, or does that program only work on htc wizard phones?
adam79 said:
doesn't lokwiz do the whole CID/SIM unlock, or does that program only work on htc wizard phones?
Click to expand...
Click to collapse
Nope - it only works for Wizard.
just transfer this file to my documents in your PHONE run it and enjoy.
Greetings
P.S. File is attached
Try to make this sticky.thx
you do realise that you're trying to flash the patched Hermes SPL to your device... I suggest using my proper unlocker, this is potentially suicide
bro... i try to unlock my treo 750 but i see this massage i attached to you image ....
respactfully
GSM system said:
bro... i try to unlock my treo 750 but i see this massage i attached to you image ....
respactfully
Click to expand...
Click to collapse
I guess you have to run in on your Treo...
dubravk0 said:
just transfer this file to my documents,run it and enjoy.
Greetings
P.S. File is attached
Try to make this sticky.thx
Click to expand...
Click to collapse
Many thanks brother ... i do that My treo750 now is unlock ....and befor that i tried to use the software for Mr.Olipro ((Cheetah Hard-SPL and SIM Unlocker )) but is dosen't work ... i apprecaite it you please can i add you in my list friend in yahoo or hotmail if you can send it to me your Address
respactfully
Olipro said:
you do realise that you're trying to flash the patched Hermes SPL to your device... I suggest using my proper unlocker, this is potentially suicide
Click to expand...
Click to collapse
Dear Olipro,
Is that dangerous to use that unlocker?
Thanks!
This is not suicide
dubravk0 said:
just transfer this file to my documents,run it and enjoy.
Greetings
P.S. File is attached
Try to make this sticky.thx
Click to expand...
Click to collapse
This is not suicide but still you will need the radio patcher that Olipro made, you thought that the unlocker Olipro made was not the one made the Cheetah sim-unlock? well, i tell you, YOU ARE WRONG!!! Olipro's Cheetah unlocker is the one responsible why your Cheetah sim-unlock. (and also thaks POF for the HERM Unlocker for the 3rd Step for the Cheetah Unlocking Process.)
Just tried it out. Yep its a sure deal. Worked like a charm well... along with the first two steps from cheetah.
GSM system said:
bro... i try to unlock my treo 750 but i see this massage i attached to you image ....
respactfully
Click to expand...
Click to collapse
Transfer it to TREO,it is 16bit app
GSM system said:
Many thanks brother ... i do that My treo750 now is unlock ....and befor that i tried to use the software for Mr.Olipro ((Cheetah Hard-SPL and SIM Unlocker )) but is dosen't work ... i apprecaite it you please can i add you in my list friend in yahoo or hotmail if you can send it to me your Address
Respactfully
Click to expand...
Click to collapse
mail no longer available
Direct unlock with HERM unlocker will not work.
Direct unlock with HERM unlocker will not work. unless you can use the 2 steps of olipro's cheetah unlocker. i am sure for that coz i have lots of treo 750 unlocked count is 37 cheetahs. thanks olipro and pof.
Great Post guys. Thanks everyone that contributed to making the process smooth.
In the poll, there were 7 users that weren't able to get this to work and 8 that were. What brands were the treo 750s for the 7 users who "it didn't work for"?
The people that can't unlock it because they did not run the other unlocker first. i was on the same boat until some more light were shed
DUDE, i was desperate,tried everything,but nothing,then i just tested this....and worked.
help me
it did'mt work 4 me i downloaded the file copied it to my phone and ran it and it's still saying sim lock and all super cid
what am i not doing i am new to this so hel please
HELP!1
Hey All i am new this thing and need some help as it did not work 4 me so please HELP!!! I copird the file to my phone and ran it and after it finished i soft reset the phone and then changed sim and it prompted me for some super cid/sid
I think you have to have flash patched radio to unlock - try Olipro unlocker - works great.
Nice
Thanks a lot....
Hey all,
I just need to unlock my SIM, there is another program??? because i tried many times to use the cheetah and i had the step 2 error that are some people telling here.
Thanks a lot
Hello.Sorry for wrong english.
my problem is on cingular 8125
I bought it with problem.
On splash screen it freeze, i flash RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1,because it firmware for cingular 8125. and it freeze too.
Can you help me?
my ipl 2.25
spl 2.25
gsm 02.25.11
os 2.25.11.1
Thank you. and again sorry for wrong english.
Ok Dude here is your solution ive found it myself after Searching
I will not be liable for Bricking your Device you do this at your own Risk*
First of All Is your Phone CID unlocked?
if it is check to see if you can hard reset if your phone says Format is Failed then here is your fix
First flash factory rom
grab a minisd that is blank *Warning it will Overwrite any card you put in*
enter into bootloader
reset+ camera button
in windows xp
Download mtty
http://forum.xda-developers.com/attachment.php?attachmentid=71806&d=1203597568
Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
run program
set port to
\\.\WCEUSBH001
click OK
*Warning it will Overwrite any card you put in*
type in at CMD>
r2sd all
then press enter
after it finishes reset pda and return back into bootloader mode
reset+ camera button
it will ask if you wish to flash from sd press Voice Command button to accept
after 100% complete reset phone you should be able to get back
hello. thank you for a help. mtty says me You didn't get the proper security level to download a specific image. why i do wrong?
cg_ar said:
hello. thank you for a help. mtty says me You didn't get the proper security level to download a specific image. why i do wrong?
Click to expand...
Click to collapse
Your phone is CID locked,Mtty will not work in this situation. Have you tried a Hard Reset.
Does it display any error message while flashing the official Rom,does it complete flashing or stops with a error message ?
Which windows you are flashing with,WinXP or Vista ?
when hard reser it says me a fat format failed. all sw flash without problem.
Anybody know how this is repair? (sorry for wrong english)
cg_ar said:
when hard reser it says me a fat format failed. all sw flash without problem.
Anybody know how this is repair? (sorry for wrong english)
Click to expand...
Click to collapse
how it cid unlock in bootloader mode?
cg_ar said:
how it cid unlock in bootloader mode?
Click to expand...
Click to collapse
You cannot CID unlock in the Bootloaders,it has to have a working OS (Rom),try to flash a rom,try these roms,lets hope one of them might work, Button's Rom 1.05 or xda_minis_launch or wizard_love_rom and official rom of your carrier and if there's any sdcard/mini_sdcard inserted in the phone,take it out before flashing,just keep on trying the different roms,its a catch 22 situation,it won't let the rom flash,stuck at splash screen and still it won't get CID unlocked in Bootloaders or use the Mtty method.I can imagine your frustration,but you gotta keep on trying.
i tried Xda_MiniS_LaunchROM_v154102,wizard love,button and original rom from cingular. and it freez on boot at all roms,and cannot make a hard reset. what i will doing next?
in this condition phone is not repairable?
cg_ar said:
in this condition phone is not repairable?
Click to expand...
Click to collapse
YES ! it is repairable,but not free,you'll have to pay for getting the CID unlock code from 'imei-check' uk.They might charge you around 20 or 30 dollars and provide you with a unlocking code,after that you'll be able to flash any Rom,but,here we were trying to get it working free somehow! Anyway, the choice is yours now,but certainly it is repairable,don't loose hope !
zabardast_1 said:
YES ! it is repairable,but not free,you'll have to pay for getting the CID unlock code from 'imei-check' uk.They might charge you around 20 or 30 dollars and provide you with a unlocking code,after that you'll be able to flash any Rom,but,here we were trying to get it working free somehow! Anyway, the choice is yours now,but certainly it is repairable,don't loose hope !
Click to expand...
Click to collapse
I know a way to avoid paying and manage a security_level=0 to allow "r2sd all"
It's just a matter of flashing a SoftSPL for G3 and use mtty
"Hello,
if the device doesn't boot up in windows then unlocker it will not work!
Regards,
IMEI-CHECK Team"
it says on imei-check.
how i will did?
what is softSpl for g3? please give url. thank you
mestrini said:
I know a way to avoid paying and manage a security_level=0 to allow "r2sd all"
It's just a matter of flashing a SoftSPL for G3 and use mtty
Click to expand...
Click to collapse
hey m8
You referring to 'JumpSPL' or something ? thats interesting
cg_ar said:
"Hello,
if the device doesn't boot up in windows then unlocker it will not work!
Regards,
IMEI-CHECK Team"
it says on imei-check.
how i will did?
what is softSpl for g3? please give url. thank you
Click to expand...
Click to collapse
hmmm, so imei-check' said that,yeah ! I presume,you got to have a working OS (Rom)
Well, softSpl for G3, I'm not sure myself,let mestrini handle this.
zabardast_1 said:
hey m8
You referring to 'JumpSPL' or something ? thats interesting
Click to expand...
Click to collapse
Something like that
If i recall correctly while developing SoftSPL for G4, The Equinox also made a G3. Problem is no one ever thought of a use to it (until now, and i have others hehe )
mestrini said:
Something like that
If i recall correctly while developing SoftSPL for G4, The Equinox also made a G3. Problem is no one ever thought of a use to it (until now, and i have others hehe )
Click to expand...
Click to collapse
WOW !
I'm all anxious here...... eyes n ears !!!
i download a wzg3.7z. unpack and have
Hard-SPL.nb
JumpSPL.exe
SPL.lnk
spl.nb.
it has in pack 145kb is it alright?
and jumpspl cannot execute and spl.ink too. How this flash?
cg_ar said:
please mail me softspl for wizard g3. because from my ip on rapidshare already downloading. please mail on cg_ar(a)mail.ru
Click to expand...
Click to collapse
Well, I do realize your frustration,but this application still needs to be tested and tried first,as far as I know,it has not been applied and tried yet.
But keep your fingers crossed as I'm,hope it comes out successful,it wud solve this problem of not allowing to "r2sd all" using mtty in CID locked device.
hmm, there's a flaw in my theory: It's necessary to access WinCE (WM) to allow Haret to do it's job
Maybe there's a work around i can think of...
sorry
cg_ar said:
i download a wzg3.7z. unpack and have
Hard-SPL.nb
JumpSPL.exe
SPL.lnk
spl.nb.
it has in pack 145kb is it alright?
and jumpspl cannot execute and spl.ink too. How this flash?
Click to expand...
Click to collapse
What to do?
I have got unlock code from At&t for tilt...i tried it 4 times but it says invalid code .. what could be the reasons ? i have only 1 try left...is there any way to reset it or any other way .
How long i have to wait .. until timeout ?
or you could use the searchbox for sim unlocker and do it free of charge
n3xt said:
I have got unlock code from At&t for tilt...i tried it 4 times but it says invalid code .. what could be the reasons ? i have only 1 try left...is there any way to reset it or any other way .
How long i have to wait .. until timeout ?
Click to expand...
Click to collapse
did you get your unlock code from att or through third party?? if you are an att customer (and in alot of cases even if you are not) you can get the unlock code by "simply calling" att. They are required to provide that to you as long as you have been a customer for i believe atleast 3 months. Even if you are under 3 months just be polite to the operator and they will give it to you. I got mine the second day i had my tilt (not that i needed it but just wanted to see how cooperating they were), all i did was tell them that i am going to be traveling oversea's next month.
If all this fails like above op suggested you can use the kaiser simunlocker from this forum (as suggested search for it) or since i am feeling extremely nice here is the link :
http://forum.xda-developers.com/showthread.php?t=361039
send a donation to jockyw if you think his hardwork helped you (which it will trust me).
didnt he just say he got it from at&t.
i would give at&t a call again in case there was a mistake in the imei or the unlock code. or like others have suggested, using the unlockers available in these forums
XtreMe_G said:
didnt he just say he got it from at&t.
i would give at&t a call again in case there was a mistake in the imei or the unlock code. or like others have suggested, using the unlockers available in these forums
Click to expand...
Click to collapse
i have used Kaiser SIM/CID Unlocker & Changer but after step2 i ave got black screen after at&t logo n 3G it shows only black screen... ..any help i am totaly new to this... how can i flash back to my previos rom and radio..Thank You All for ur Response
you need to flash a wm6.1 rom to use this unlocker, if you want to go back then flash your original radio
Can You Plz Help me with WM6.1 ? Where can i find wm6.1
Have a look here.
Right at the top of the page you have the Tilt 6.1 roms from AT&T.
Psi
PsiDOC said:
Have a look here.
Right at the top of the page you have the Tilt 6.1 roms from AT&T.
Psi
Click to expand...
Click to collapse
Thnx PsiDOC .. if i use HTC WM6.1 Rom .. wil it be ok ?
And Can i downgrade to my orignal rom if i want to ?
n3xt said:
i have used Kaiser SIM/CID Unlocker & Changer but after step2 i ave got black screen after at&t logo n 3G it shows only black screen... ..any help i am totaly new to this... how can i flash back to my previos rom and radio..Thank You All for ur Response
Click to expand...
Click to collapse
Good job guys send the noob down the yellow *** brick*** road
when i flash other radio to sim unlock my Tilt .. it gives me the blank screen after at&t start up logo ... i tried both unlockers by jockyw2001 and olipro but the same prob after flashing patched radio tilt show only blank screen.. am i doing anything wrong ?
fgs man.......spend a little time reading instead of just jumping into this or you're just gonna **** up you device, and please stop double posting
XtreMe_G said:
fgs man.......spend a little time reading instead of just jumping into this or you're just gonna **** up you device, and please stop double posting
Click to expand...
Click to collapse
ok..now i ll stick here..
My
ROM : 1.62.502.0
Radio : 1.27.14.09
Protocol : 22.45.88.07H
what should i do to unlock my device ?
read the whole unlocker thread......whichever one you are using, you will find that many ppl have had the same problems that you had, and there are solutions for it posted.
and for your own sake, read this here to learn more about flashing you device
http://forum.xda-developers.com/showthread.php?t=369282
I have watch videos...read instruction etc, etc, all I could on ATT Tilt/Kaiser flashing...I still don't have a clue. Do I do some type of CID unlock 1st....then is there a Jump SPL and than a Hard SPL. Is any of them two done from the boot loader screen. I can fix most electronics but I don't understand.. no you-tube video...i saw it on flashing the kaiser....sound quality bad for the hard of hearing (me).
Goto http://forum.xda-developers.com/showthread.php?t=396922
Download Jump SPL and Run it. Then the hard-spl. This will then allow you to flash the custom ROMs on your Kaiser.
Regards,
Carty..
I just went through this a few days ago trying to flash my first custom rom. I have to agree it is incredibly confusing and contradicting, which is why I'm taking the time to post this. Just read as much as you can about it and don't try to flash the rom until you understand. I am no expert on this by any means, but this is what i did on my tilt to flash HardSPL. I tried to make this as simple as possible just so you see the exact steps I went through, but i highly recommend reading the thread linked in the previous post by Carty above and the other link I'm posting at the very end.
1. download JumpSPL1.93-KAIS.exe from http://forum.xda-developers.com/showthread.php?t=354061.
2. get the hardSPL version you need for your rom. I used v3.56 from the link Carty gave you in the post above, because the rom I am using was based on the official att 6.1 rom. You may need a different one for the rom you want to flash I don't know too much about this yet. Leave the folder where you unzipped the hardspl files open on your desktop so you wont have to look for it later.
3. connect your phone to the PC, and transfer JumpSPL1.93-KAIS.exe over to your phone with activesync. Remove your microsd card if you have one on your phone (very important).
4.run JumpSPL1.93-KAIS.exe on your phone, it should go to a bootloader mode with the tricolor screen and underneath it will say USB.
5.Unplug the phone from the PC, wait about 5-10 seconds and plug it back in. Activesync should NOT be able to recognize your phone. If it does, something went wrong so start over.
6. Finally you can run the KaiserCustomRUU.exe from the hardSPL folder on your pc desktop and follow the instructions. It will load the HardSPL on your phone.
7. if you want to make sure it loaded, shut down your device and when your are turning it on press both the power and camera button at the same time, it will go into bootloader mode and show you what SPL is on your device. mine says SPL-3.56.Hard after I loaded the hardspl. You are now ready to flash a new rom.
This wiki helped me the most:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Read as much of it as you can, especially the "SPL questions?" link, that was the most useful for me.
I hope this helps
All good advice! I just loaded the HardSPL on my phone for the first time and it worked perfectly.
Now all i need is a work connection that doesnt block my attempts to download ROM's!!!!!!
tricky_uk said:
All good advice! I just loaded the HardSPL on my phone for the first time and it worked perfectly.
Now all i need is a work connection that doesnt block my attempts to download ROM's!!!!!!
Click to expand...
Click to collapse
LOL.
hjlow makes mirrors of the ROM downloads at Blogspot. Are those any good for you?
Ta
Dave
DaveShaw said:
LOL.
hjlow makes mirrors of the ROM downloads at Blogspot. Are those any good for you?
Ta
Dave
Click to expand...
Click to collapse
Sadly blogspot gets locked as well.......i've managed to download some stuff of here but in general sites it classes as 'personal storage' it gets a bit upset about...
if anyone knows any other way round i'd be eternally grateful!
ben_zin said:
I just went through this a few days ago trying to flash my first custom rom. I have to agree it is incredibly confusing and contradicting, which is why I'm taking the time to post this. Just read as much as you can about it and don't try to flash the rom until you understand. I am no expert on this by any means, but this is what i did on my tilt to flash HardSPL. I tried to make this as simple as possible just so you see the exact steps I went through, but i highly recommend reading the thread linked in the previous post by Carty above and the other link I'm posting at the very end.
Click to expand...
Click to collapse
Amen to that.. I like this guy.
Thx...clear and direct....now I am ready.
Carty said:
Goto http://forum.xda-developers.com/showthread.php?t=396922
Download Jump SPL and Run it. Then the hard-spl. This will then allow you to flash the custom ROMs on your Kaiser.
Regards,
Carty..
Click to expand...
Click to collapse
does this work on diamond?or i mean, should i frist jump spl ant hen hard, or just jump spl?
http://forum.xda-developers.com/showthread.php?t=408109&page=506 post 5055
materijalmen said:
does this work on diamond?or i mean, should i frist jump spl ant hen hard, or just jump spl?
http://forum.xda-developers.com/showthread.php?t=408109&page=506 post 5055
Click to expand...
Click to collapse
This will then allow you to flash the custom ROMs on your Kaiser.
Click to expand...
Click to collapse
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
denco7 said:
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
Click to expand...
Click to collapse
i have tried this already
http://forum.xda-developers.com/showthread.php?t=408621 but nothing has changed...i asked for help, but nobody answers....see the last posts int that thread.
materijalmen said:
i have tried this already
http://forum.xda-developers.com/showthread.php?t=408621 but nothing has changed...i asked for help, but nobody answers....see the last posts int that thread.
Click to expand...
Click to collapse
Unfortunately this is the Kaiser forum and you will get even less help here.
Post your questions in the Diamond forum and people will help,when and if they are able. And in the meantime, read and search and try to figure it out for yourself, All the steps and instructions are there.
Sometimes people, unfortunately, mistake this site for the HTC free support line, with 12 techs waiting at their PC's to help. Then they get irritated that no one answers their requests for help on a timely basis . If people won't or can't answer your questions then you need to figure it out on your own.
The bottom line is, if you don't know what you are doing, then you shouldn't be messing around with your phone. Sorry
denco7 said:
Unfortunately this is the Kaiser forum and you will get even less help here.
Post your questions in the Diamond forum and people will help,when and if they are able. And in the meantime, read and search and try to figure it out for yourself, All the steps and instructions are there.
Sometimes people, unfortunately, mistake this site for the HTC free support line, with 12 techs waiting at their PC's to help. Then they get irritated that no one answers their requests for help on a timely basis . If people won't or can't answer your questions then you need to figure it out on your own.
The bottom line is, if you don't know what you are doing, then you shouldn't be messing around with your phone. Sorry
Click to expand...
Click to collapse
I second Denco Read Read Read Read Read........ as anything you will ask, or can even think to ask..... more than likely has ALREADY been asked AND Answered.
Htc XDA member: how can I help you today?
Xda Newb: My phone isnt working.... Can you fix it ?
Htc XDA member: is your phone plugged in and turned on?"
Xda Newb:Wheres the on button?
( 1 min later) where do I plug it in at ?
(2 mins later) whats a battery?
(2.25 mins later) how do I know its on?
(2.3 mins later) why wont you answer me ?
(2.35mins later)Why arent you telling me my answers?
(2.4 mins later)whats wrong with my phone?
(2.5 mins later) You guys must be jerks because you wont spoon feed me [email protected]@@!!!
XDA MODERATOR : you noob you are banned for not reading PAGE 1 of the GODDAMN WIKI as all your answers were right there 1 click away. Now you cant access them HAHA. This is what you get for being IMPATIENT AND ANNOYING ( They should really do this here )
LOL
Just my rant
denco7 said:
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
Click to expand...
Click to collapse
How is this link related to the topic?
I want to use JumpSPL to change the version of HardSPL I have on diamond b/c my USB port does not work.
kyniemxotxa98 said:
How is this link related to the topic?
I want to use JumpSPL to change the version of HardSPL I have on diamond b/c my USB port does not work.
Click to expand...
Click to collapse
And what I said was that this was the Kaiser forums and not the Diamond forums. Putting Kaiser Spl's on a Diamond will brick your phone faster than throwing it into a bucket of water. So I gave him a link to the Diamond forum and Diamond Security/CID/Sim unlocker.
How is your question related to the Kaiser forums ?
Will it work on my TP/Excalibur? No as phones have different hardware to which is why h-spl's are device specific.
The best way to help yourself and not get a brick "expensive paperweight" is to head to device subforum and do some reading, as last thing you want is to be creating a thread named "Help"
denco7 said:
And what I said was that this was the Kaiser forums and not the Diamond forums. Putting Kaiser Spl's on a Diamond will brick your phone faster than throwing it into a bucket of water. So I gave him a link to the Diamond forum and Diamond Security/CID/Sim unlocker.
How is your question related to the Kaiser forums ?
Click to expand...
Click to collapse
Since I cannot find anything helpful in Diamond forum, I dig around in other forums to try to rescue my phone and make it usable.
Which is a recipe for diasaster...seriously, if you are gonna do something as stupid as to try to make something SPECIFICALLY for another device work on yours, then you do not deserve to own a Diamond.